Search

Herein, we successfully synthesized high-quality Hf-ZnO thin films with various Hf contents (0, 3, 6, 9, 12, and 15 at. %), which showed both superhydrophilic (6% Hf-ZnO) and ultrahydrophobic (15% Hf-ZnO) wetting behavior. Different characterization methods were opted to recognize the structural (XRD, SEM, AFM) and defect properties (XPS) of the pristine and doped materials, to understand the mechanisms underlying the tuning of wetting behavior (contact angle). Hafnium doping plays a noteworthy role in tuning the morphology of the ZnO nanostructures, roughness of the material surface, generation of defects, Lewis acid-base interactions, and wettability properties. We achieved a superhydrophilic surface with 6% Hf-ZnO owing to a smooth surface, less basicity, and maximum concentration of oxygen vacancies, and also an ultrahydrophobic surface with 15% Hf-ZnO because of the rough surface, high basicity, and minimum concentration of oxygen vacancies. The as prepared Hf-ZnO samples showed stable performance (stability, wearability, weatherability, and antifouling) under real-life conditions marking them multifunctional and biosafe material to be effectively used in solar and building's window. A wetting mechanism was established to relate the wetting behavior of the samples to oxygen vacancies (active sites for water dissociation: resulted due to charge mismatch of host cation (Zn2+) by the doped cation (Hf4+)), roughness (smooth surface (Wenzel) with minimum Rrms (0.588) portraying hydrophilic property and rough caltropic surface (Cassie-Baxter) with maximum Rrms (2.522) portraying hydrophobic property), basicity (H2O: Lewis Base; ZnO: Lewis acid; HfO2: Lewis base) and morphology (tube-like structure (0-6% Hf-ZnO) and caltrop-like structure (12-15% Hf-ZnO)).

Photoelectrochemical (PEC) water splitting by direct solar irradiation has been considered as a route to produce solar fuel, but the technique is impeded by limitation of the photocathode materials...

Monoclinic clinobisvanite BiVO4 is one of the most promising materials in the field of solar water splitting due to its band gap and suitable valence band maximum (VBM) position. We have carried out comprehensive experimental and periodic density functional theory (DFT) simulations of BiVO4 heterojunction with selenium (Se-BiVO4), to understand the nature of the heterojunction. We have also investigated the contribution of Se to higher performance by effecting morphology, light absorption, and charge transfer properties in heterojunction. Electronic properties simulations of BiVO4 show that its VBM and conduction band minimum (CBM) are comprised of O 2p and V 3d orbitals, respectively. The Se/BiVO4 heterojunction has boosted the photocurrent density by 3-fold from 0.7 to 2.2 mA cm–2 at 1.3 V vs SCE. The electrochemical impedance and Mott–Schottky analysis result in favorable charge transfer characteristics, which account for the higher performance in Se/BiVO4 as compared to the BiVO4 and Se. Finally, spec...

Theoretical study of an optically transparent, near-infrared-absorbing low energy gap conjugated polymer, donor–acceptor–donor (D-A-D), 2,1,3-benzosele-nadiazole (A) as acceptor and 3,4-ethylenedioxyselenophene (D) as donor fragments, with promising attributes for photovoltaic application is reported herein. The D and A moiety on the polymeric backbone has been found to be responsible for tuning the band gap, optical gap, open circuit (VOC), and short-circuit current density (JSC) in the polymers solar cells. D-A-D has a key role in charge separation and molecular architecture which ultimately influences the charge transport. Reduction in the band gap, high charge transformation, and enhanced visible light absorption in the D-A-D system is because of strong overlapping of molecular orbitals of D and A. The polaron and bipolaron effects are also investigated which has a direct relation with visible light photocurrent generation. In addition, the enhanced planarity and weak steric hindrance between adjacent...

Sensitivity and selectivity of polypyrrole (PPy) toward NH3, CO2, and CO have been studied at density functional theory (DFT). PPy oligomers are used both in the doped (PPy+) and neutral (PPy) form...

New hexanuclear zinc complex, Zn6(OAc)8(μ-O)2(dmae)4 (1) (OAc = acetato, dmae = N,N-dimethyl aminoethanolato) has been synthesized and characterized by its melting point, elemental analysis, Fourier transform infrared spectroscopy, atmospheric-pressure chemical-ionization mass spectrometry, thermal gravimetric analysis, and single crystal X-ray analysis. The complex (1) crystallizes in the monoclinic space group C2/c. The high solubility of complex (1) in organic solvents such as alcohol, THF, and toluene and low decomposition temperature as compared to Zn(OAc)2 make it a promising single source candidate for the deposition of nanostructured ZnO thin films by aerosol-assisted chemical vapor deposition. Films with various nanostructures, morphology, and crystallographic orientation have been deposited by controlling the deposition temperature. The deposited films have been characterized by X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray analysis. The optical characterization of...

Bi2S3 nanotubes and nanoparticle in the form of thin films were deposited on fluorine doped SnO2 (FTO) coated conducting glass substrates by Aerosol Assisted Chemical Vapor Deposition (AACVD) using tris-(N,N-diethyldithiocarbamato)bismuth(III), [Bi(S2CN(C2H5)2)3]2 (1) as a precursor. Thin films were deposited from solutions of (1) in either chloroform, dichloromethane, or a 1:1 mixture of chloroform and toluene at temperature between 350 to 450 °C and characterized by X-ray diffraction (XRD), UV−vis spectroscopy, field emission gun scanning electron microscopy (FEGSEM), and energy dispersive X-ray (EDX) analysis. FEGSEM images of films deposited from chloroform or dichloromethane exhibit well-defined and evenly distributed nanotubes with an average internal diameter of 40 nm. Films deposited from chloroform/toluene, on the other hand, have compact nanostuctured morphology. Bandgaps of 1.85 and 1.8 eV were estimated for nanotubes and nanoparticles, respectively, by extrapolating the linear part of the Tauc...

α-Fe2O3 thin film photoelectrodes were fabricated by aerosol-assisted chemical vapor deposition (AACVD) using a new hexanuclear iron precursor [Fe6(PhCOO)10(acac)2(O)2(OH)2]·3C7H8 (1) (where PhCOO = benzoate and acac = 2,4-pentanedionate). The precursor (1) designed for AACVD has a low decomposition temperature and sufficient solubility in organic solvents and was synthesized by simple chemical techniques in high yield. It was characterized by melting point, FT-IR, X-ray crystallography, and thermogravimetry (TGA). The TGA analysis proved that complex (1) undergoes facile thermal decomposition at 475 °C to give iron oxide residue. In-house designed AACVD equipment was used to deposit highly crystalline thin films of α-Fe2O3 on fluorine-doped SnO2 coated glass substrates at 475 °C in a single step. The material properties were characterized by XRD, XPS, and Raman spectroscopy, and the results confirmed that films were highly crystalline α-Fe2O3 and free from other phases of iron oxide. Further analysis of ...

Si-doped nanostructured hematite (α-Fe2O3) has attracted significant attention as a low-cost, high-efficiency candidate material for photoelectrochemical water splitting. In this work, we investiga...

Heterobimetallic molecular precursors [Ti4(dmae)6(mu-OH)(mu-O)6Cu6(OAc)9.H2O] (1) and [Zn7(OAc)10(mu-OH)6Cu5(dmae)4Cl4] (2) for the deposition of metal oxide thin films of Cu6Ti4O12 (Cu3TiO4, TiO2) and Cu5Zn7O12 (ZnO, CuO) were prepared by the interaction of Ti(dmae)4 with Cu(OAc)2.2H2O for 1 and tetrameric (N,N-dimethylamino)ethanolatocopper(II) chloride, [(dmae)CuCl]4 [where dmae = (N,N-dimethylamino)ethanolate] with Zn(OAc)2.2H2O (where OAc = acetate) for 2 in dry toluene. Both complexes were characterized by melting point, elemental analysis, Fourier transform IR, fast atom bombardment mass spectrometry, thermal analysis (TGA), and single-crystal X-ray diffraction. TGA and XRD prove that complexes 1 and 2 undergo facile thermal decomposition at 300 and 460 degrees C to form thin films of Cu/Ti and Cu/Zn mixed-metal oxides, respectively. Scanning electron microscopy and XRD of the thin films suggest the formation of impurity-free crystallite mixtures of Cu3TiO4 and TiO2, with average crystallite sizes of 22.2 nm from complex 1 and of ZnO and CuO with average crystallite sizes of 26.1 nm from complex 2.