Search

Colloidal quantum dots (QDs) with a wide color gamut and high luminescent efficiency are promising for next-generation electronic and photonic devices. However, precise and scalable patterning of QDs without degrading their properties and their integration into commercially relevant devices, such as digitally addressable QD light-emitting diode (QLED) displays, remain challenging. Here, we develop electronically optimized diazirine-based cross-linkers for nondestructive, direct photopatterning of QDs and, ultimately, building the active-matrix QLED displays. The key to the cross-linker design is the introduction of electron-donating substituents that permit the formation of ground-state singlet carbenes for air-stable and benign QD photopatterning. Under ambient conditions, these cross-linkers enable the patterning of heavy metal-free QDs at a resolution of over 13,000 pixels per inch using commercial i-line photolithography. The patterned QD layers fully preserved their optical and optoelectronic properties. Pixelated electroluminescent devices with patterned InP/ZnSe/ZnS QD layers show a peak external quantum efficiency of 15.3% and a maximum luminance of about 40,000 cd m -2 , outperforming those made by existing QD patterning approaches. We further show the seamless integration of patterned QLEDs with thin-film transistor circuits and the fabrication of dual-color active-matrix displays. These results underscore the importance of designing photochemistry for QD patterning, and promise the implementation of direct photopatterning methods in manufacturing commercial QLED displays and other integrated QD device platforms.

Radical-type carbene transfer catalysis is an efficient method for the direct functionalization of C-H and C=C bonds. However, carbene radical complexes are currently formed via high-energy carbene precursors, such as diazo compounds or iodonium ylides. Many of these carbene precursors require additional synthetic steps, have an explosive nature, or generate halogenated waste. Consequently, the utilization of carbene radical catalysis is limited by specific carbene precursors that access the carbene radical intermediate. In this study, we generate a cobalt(III) carbene radical complex from dimethyl malonate, which is commercially available and bench-stable. EPR and NMR spectroscopy were used to identify the intermediates and showed that the cobalt(III) carbene radical complex is formed upon light irradiation. In the presence of styrene, carbene transfer occurred, forming cyclopropane as the product. With this photochemical method, we demonstrate that dimethyl malonate can be used as an alternative carbene precursor in the formation of a cobalt(III) carbene radical complex., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Polyurethane coatings have strong material properties due to the hydrogen bonding inherent to the urethane groups. However, installing this urethane moiety usually requires curing through difficult-to-handle isocyanates. In this work, we show the development of a polyurethane-based crosslinker that can be used to formulate a one-component polyurethane coating with material properties similar to those of isocyanate-based polyurethane coatings. To achieve this, we used diazirine functionalities that generate carbenes upon heating, which react with alcohol functionalities in a polyol to generate a crosslinked network with a high storage modulus., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Here, we present the development and characterization of the novel PhenTAA macrocycle as well as a series of [Ni(R 2 PhenTAA)] n complexes featuring two sites for ligand-centered redox-activity. These differ in the substituent R (R = H, Me, or Ph) and overall charge of the complex n (n = -2, -1, 0, +1, or +2). Electrochemical and spectroscopic techniques (CV, UV/vis-SEC, X-band EPR) reveal that all redox events of the [Ni(R 2 PhenTAA)] complexes are ligand-based, with accessible ligand charges of -2, -1, 0, +1, and +2. The o -phenylenediamide (OPD) group functions as the electron donor, while the imine moieties act as electron acceptors. The flanking o -aminobenzaldimine groups delocalize spin density in both the oxidized and reduced ligand states. The reduced complexes have different stabilities depending on the substituent R. For R = H, dimerization occurs upon reduction, whereas for R = Me/Ph, the reduced imine groups are stabilized. This also gives electrochemical access to a [Ni(R 2 PhenTAA)] 2- species. DFT and TD-DFT calculations corroborate these findings and further illustrate the unique donor-acceptor properties of the respective OPD and imine moieties. The novel [Ni(R 2 PhenTAA)] complexes exhibit up to five different ligand-based oxidation states and are electrochemically stable in a range from -2.4 to +1.8 V for the Me/Ph complexes (vs Fc/Fc + ).

A concept for intermolecular C-N cross-coupling amination has been discovered using tetrazoles and aromatic and aliphatic azides with boronic acids under iron-catalyzed conditions. The amination follows an unprecedented metalloradical activation mechanism that is different from traditional metal-catalyzed C-N cross-coupling reactions. The scope of the reaction has been demonstrated by the employment of a large number of tetrazoles, azides, and boronic acids. Moreover, several late-stage aminations and a short synthesis of a drug candidate have been showcased for further synthetic utility. Collectively, this iron-catalyzed C-N cross-coupling should have wide applications in the context of medicinal chemistry, drug discovery, and pharmaceutical industries.

The NiOOH electrode is commonly used in electrochemical alcohol oxidations. Yet understanding the reaction mechanism is far from trivial. In many cases, the difficulty lies in the decoupling of the overlapping influence of chemical and electrochemical factors that not only govern the reaction pathway but also the crystal structure of the in situ formed oxyhydroxide. Here, we use a different approach to understand this system: we start with synthesizing pure forms of the two oxyhydroxides, β-NiOOH and γ-NiOOH. Then, using the oxidative dehydrogenation of three typical alcohols as the model reactions, we examine the reactivity and selectivity of each oxyhydroxide. While solvent has a clear effect on the reaction rate of β-NiOOH, the observed selectivity was found to be unaffected and remained over 95% for the dehydrogenation of both primary and secondary alcohols to aldehydes and ketones, respectively. Yet, high concentration of OH - in aqueous solvent promoted the preferential conversion of benzyl alcohol to benzoic acid. Thus, the formation of carboxylic compounds in the electrochemical oxidation without alkaline electrolyte is more likely to follow the direct electrochemical oxidation pathway. Overoxidation of NiOOH from the β- to γ-phase will affect the selectivity but not the reactivity with a sustained >95% conversion. The mechanistic examinations comprising kinetic isotope effects, Hammett analysis, and spin trapping studies reveal that benzyl alcohol is oxidatively dehydrogenated to benzaldehyde via two consecutive hydrogen atom transfer steps. This work offers the unique oxidative and catalytic properties of NiOOH in alcohol oxidation reactions, shedding light on the mechanistic understanding of the electrochemical alcohol conversion using NiOOH-based electrodes., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Spherical three-dimensional (3D) cages composed of palladium(II) and pyridyl ligands are a mainstay of supramolecular chemistry with demonstrated catalytic and optoelectronic applications. The widely reported self-assembly of these palladium-based cages exhibits sensitivity to the solvents, reagents, and/or reactants employed. This sensitivity, and the resulting inconsistency between synthetic protocols, hinders the development of desirable palladium-based cages. We have found that pyridyl ligand substitution─the rate-limiting step of self-assembly─is facilitated by endogenous supporting ligands derived from the solvents, reagents, and reactants employed in synthetic protocols of palladium- and platinum-based assemblies. Here, we present a systematic investigation combining 1 H-NMR, electrospray ionization mass spectrometry (ESI─MS), and absorption spectroscopy to characterize the intermediates to support the mechanism of pyridyl ligand substitution on a model complex, M ( py ) 2 ( M = ( N,N,N ', N '-tetramethylethylenediamine)palladium(II), py = pyridine), under simulated synthetic conditions for self-assembly. Our investigation exposes mechanisms for pyridyl ligand substitution, featuring intermediates stabilized by solvent, anion, or ( in situ formed) alkoxide moieties. Interrogation of destabilizing agents (2,2,2-trifluoroethanol and tetra( n -butyl)ammonium chloride) reveal similar mechanisms that ultimately facilitate the self-assembly of coordination cages. These findings rationalize widely reported solvent and anion effects in the self-assembly of coordination cages (and similar constructs) while highlighting methodologies to understand the role of supporting ligands in coordination chemistry.

Discovered as organometallic curiosities in the 1970s, carbene radicals have become a staple in modern-day homogeneous catalysis. Carbene radicals exhibit nucleophilic radical-type reactivity orthogonal to classical electrophilic diamagnetic Fischer carbenes. Their successful catalytic application has led to the synthesis of a myriad of carbo- and heterocycles, ranging from simple cyclopropanes to more challenging eight-membered rings. The field has matured to employ densely functionalized chiral porphyrin-based platforms that exhibit high enantio-, regio-, and stereoselectivity. Thus far the focus has largely been on cobalt-based systems, but interest has been growing for the past few years to expand the application of carbene radicals to other transition metals. This Perspective covers the advances made since 2011 and gives an overview on the coordination chemistry, reactivity, and catalytic application of carbene radical species using transition metal complexes and catalysts., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Herein, we present a comprehensive study on the use of N -heterocyclic carbene (NHC)-ligated boryl radicals to enable C(sp 3 )-C(sp 3 ) bond formation under visible-light irradiation via Halogen-Atom Transfer (XAT). The methodology relies on the use of an acridinium dye to generate the boron-centered radicals from the corresponding NHC-ligated boranes via single-electron transfer (SET) and deprotonation. These boryl radicals subsequently engage with alkyl halides in an XAT step, delivering the desired nucleophilic alkyl radicals. The present XAT strategy is very mild and accommodates a broad scope of alkyl halides, including medicinally relevant compounds and biologically active molecules. The key role of NHC-ligated boryl radicals in the operative reaction mechanism has been elucidated through a combination of experimental, spectroscopic, and computational studies. This methodology stands as a significant advancement in the chemistry of NHC-ligated boryl radicals, which had long been restricted to radical reductions, enabling C-C bond formation under visible-light photoredox conditions.

A novel T-type molecular photoswitch based on the reversible cyclization of 1 H -2-benzo[ c ]oxocins to dihydro-4 H -cyclobuta[ c ]isochromenes has been developed. The switching mechanism involves a light-triggered ring-contraction of 8-membered 1 H -2-benzo[ c ]oxocins to 4,6-fused O -heterocyclic dihydro-4 H -cyclobuta[ c ]isochromene ring systems, with reversion back to the 1 H -2-benzo[ c ]oxocin state accessible through heating. Both processes are unidirectional and proceed with good efficiency, with switching properties─including reversibility and half-life time─easily adjusted via structural functionalization. Our new molecular-switching platform exhibits independence from solvent polarity, originating from its neutral-charge switching mechanism, a property highly sought-after for biological applications. The photoinduced ring-contraction involves a [2+2] conjugated-diene cyclization that obeys the Woodward-Hoffmann rules. In contrast, the reverse process initiates via a thermal ring-opening ( T > 60 °C) to produce the original 8-membered 1 H -2-benzo[ c ]oxocins, which is thermally forbidden according to the Woodward-Hoffmann rules. The thermal ring-opening is likely to proceed via an ortho -quinodimethane ( o -QDM) intermediate, and the corresponding switching mechanisms are supported by experimental observations and density functional theory calculations. Other transformations of 1 H -2-benzo[ c ]oxocins were found upon altering reaction conditions: prolonged heating of the 1 H -2-benzo[ c ]oxocins at a significantly elevated temperature (72 h at 120 °C), with the resulting dihydronaphthalenes formed via the o -QDM intermediate. These reactions also proceed with good chemoselectivities, providing new synthetic protocols for motifs found in several bioactive molecules, but are otherwise difficult to access.

Herein we report a ligand-centered redox-controlled strategy for the synthesis of an unusual binuclear diradical cobalt(III) complex, [Co 2 III (L •3- ) 2 ] ( 1 ), featuring two three-electron reduced trianionic monoradical 2,9-bis(phenyldiazo)-1,10-phenanthroline ligands ( L • 3- ) and two intermediate-spin cobalt(III) centers having a Co-Co bond. Controlled ligand-centered oxidation of 1 afforded two mononuclear complexes, [Co II (L • - )(L 0 )] + ([ 3 ]) + and [Co II (L 0 ) 2 ] 2+ ([ 2 ] 2+ ), which upon further ligand-centered reduction yielded a di-azo-anion diradical complex, [Co II (L • - ) 2 ] ( 4 ). In complex 1 , two three-electron reduced di-azo-anion monoradical ligands ( L • 3- ) bridge two intermediate Co(III) centers at a distance of 2.387(2) Å, while upon oxidation, one of the coordinating azo-arms of L becomes pendent, and in complexes [ 2 ] 2+ , [ 3 ] + , and 4 , two tetradentate ligands coordinate a single Co(II) center in a tridentate meridional fashion with one uncoordinated azo-arm from each of the ligands. In the presence of reducing agents, the monomers [ 2 ] 2+ , [ 3 ] + , and 4 undergo ligand-centered reduction to form azo-anion radicals, and the otherwise pendent azo-arms in the presence of cobalt(II)-salts like Co(ClO 4 ) 2 or CoCl 2 bind the second Co(II)-ion; further internal electron transfer from the cobalt center to the arylazo backbone produces the binuclear complex 1 . Spectroscopic analysis, DFT studies, and control experiments were performed to understand the electronic structures and the ligand-centered redox-controlled interconversion. The application of complex 1 as a molecular memory device (memristor) was also explored. Complex 1 showed encouraging results as a memristor with a current ON/OFF ratio > 10 4 and is highly promising for resistive RAM/ROM applications.

Polyureas have widespread applications due to their unique material properties. Because of the toxicity of isocyanates, sustainable isocyanate-free routes to prepare polyureas are a field of active research. Current routes to isocyanate-free polyureas focus on constructing the urea moiety in the final polymerizing step. In this study we present a new isocyanate-free method to produce polyureas by Ru-catalyzed carbene insertion into the N-H bonds of urea itself in combination with a series of bis-diazo compounds as carbene precursors. The mechanism was investigated by kinetics and DFT studies, revealing the rate-determining step to be nucleophilic attack on a Ru-carbene moiety by urea. This study paves the way to use transition-metal-catalyzed reactions in alternative routes to polyureas., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

Singlet oxygen is a potent oxidant with major applications in organic synthesis and medicinal treatment. An efficient way to produce singlet oxygen is the photochemical generation by fullerenes which exhibit ideal thermal and photochemical stability. In this contribution we describe readily accessible M 6 L 12 nanospheres with unique binding sites for fullerenes located at the windows of the nanospheres. Up to four C 70 can be associated with a single nanosphere, presenting an efficient method for fullerene extraction and application. Depending on the functionality located on the outside of the sphere, they act as vehicles for 1 O 2 generation in organic or in aqueous media using white LED light. Excellent productivity in 1 O 2 generation and consecutive oxidation of 1 O 2 acceptors using C 70 ⊂[Pd 6 L 12 ], C 60 ⊂[Pd 6 L 12 ] or fullerene soot extract was observed. The methodological design principles allow preparation and application of highly effective multifullerene binding spheres.

In this paper, we report the synthesis of a unique silicon(I)-based metalla-disilirane and report on its reactivity toward TMS-azide and benzophenone. Metal complexes containing disilylenes ((bis)silylenes with a Si-Si bond) are known, but direct ligation of the Si(I) centers to transition metals always generated dinuclear species. To overcome this problem, we targeted the formation of a mononuclear iron(0)-silicon(I)-based disilylene complex via templated synthesis, starting with ligation of two Si(II) centers to iron(II), followed by a two-step reduction. The DFT structure of the resulting η 2 -disilylene-iron complex reveals metal-to-silicon π-back donation and a delocalized three-center-two-electron (3c-2e) aromatic system. The Si(I)-Si(I) bond displays unusual but well-defined reactivity. With TMS-azide, both the initial azide adduct and the follow-up four-membered nitrene complex could be isolated. Reaction with benzophenone led to selective 1,4-addition into the Si-Si bond. This work reveals that selective reactions of Si(I)-Si(I) bonds are made possible by metal ligation.

Transition metal catalysis is of utmost importance for the development of sustainable processes in academia and industry. The activity and selectivity of metal complexes are typically the result of the interplay between ligand and metal properties. As the ligand can be chemically altered, a large research focus has been on ligand development. More recently, it has been recognized that further control over activity and selectivity can be achieved by using the "second coordination sphere", which can be seen as the region beyond the direct coordination sphere of the metal center. Hydrogen bonds appear to be very useful interactions in this context as they typically have sufficient strength and directionality to exert control of the second coordination sphere, yet hydrogen bonds are typically very dynamic, allowing fast turnover. In this review we have highlighted several key features of hydrogen bonding interactions and have summarized the use of hydrogen bonding to program the second coordination sphere. Such control can be achieved by bridging two ligands that are coordinated to a metal center to effectively lead to supramolecular bidentate ligands. In addition, hydrogen bonding can be used to preorganize a substrate that is coordinated to the metal center. Both strategies lead to catalysts with superior properties in a variety of metal catalyzed transformations, including (asymmetric) hydrogenation, hydroformylation, C-H activation, oxidation, radical-type transformations, and photochemical reactions.

Herein, we show that the photoactive complexes [(Cp)Fe(arene)] + (Cp = cyclopentadienyl; arene = C 6 H 6 , C 6 H 5 Me) act as latent catalysts that allow for photochemical control over the onset of alkyd paint curing, without the need for antiskinning agents such as the volatile 2-butanone oxime normally used to prevent curing during paint storage. The highly soluble neutral complexes [(Cp)Fe(Ch)] and [(Cp)Fe(Ch')] (Ch = cyclohexadienyl, Ch' = methylcyclohexadienyl) readily convert to the photoactive complexes [(Cp)Fe(arene)] + upon oxidation in alkyd, allowing the latter to be dosed in a wide range of concentrations. Infrared and Raman studies show similar spectral changes of the alkyd paint matrix as have been observed in alkyd curing mediated by well-known, industrially applied cobalt- and manganese-based catalyst Co(neodecanoate) 2 and [(Me 3 TACN) 2 Mn 2 (μ-OOCR) 3 ](OOCR). The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)] + system performs equally well as these cobalt- and manganese-based catalysts in terms of drying time and outperform the manganese catalyst by showing a hardness development (increase) similar to that of the cobalt-based catalyst. Based on electron paramagnetic resonance and light-activity studies, we propose that photolysis of [(Cp)Fe(arene)] + generates short-lived active Fe II species, explaining the desired latency. The [(Cp)Fe(Ch)]/[(Cp)Fe(arene)] + alkyd curing systems presented herein are unique examples of intrinsically latent paint curing catalysts that (1) are based on an abundant and harmless transition metal (Fe), (2) do not require any antiskinning agents, and (3) show favorable performance in terms of drying times and hardness development., Competing Interests: The authors declare the following competing financial interest(s): J.B., J.F. and B.B. are inventors on PCT International Patent Application WO2021/001410 (to Akzo Nobel Coatings International B.V.), which claims the use of catalysts described in this work., (© 2022 The Authors. Published by American Chemical Society.)

The metallo-radical activation of ortho -allylcarbonyl-aryl N -arylsulfonylhydrazones with the paramagnetic cobalt(II) porphyrin catalyst [Co II (TPP)] (TPP = tetraphenylporphyrin) provides an efficient and powerful method for the synthesis of novel 8-membered heterocyclic enol ethers. The synthetic protocol is versatile and practical and enables the synthesis of a wide range of unique 1 H -2-benzoxocins in high yields. The catalytic cyclization reactions proceed with excellent chemoselectivities, have a high functional group tolerance, and provide several opportunities for the synthesis of new bioactive compounds. The reactions are shown to proceed via cobalt(III)-carbene radical intermediates, which are involved in intramolecular hydrogen transfer (HAT) from the allylic position to the carbene radical, followed by a near-barrierless radical rebound step in the coordination sphere of cobalt. The proposed mechanism is supported by experimental observations, density functional theory (DFT) calculations, and spin trapping experiments.

A multistable molecular switching system based on an anthracene-extended bis-thiaxanthylidene with three individually addressable states that can be interconverted by electrochemical, thermal, and photochemical reactions is reported. Besides reversible switching between an open-shell diradical- and a closed-shell electronic configuration, our findings include a third dicationic state and control by multiple actuators. This dicationic state with an orthogonal conformation can be switched electrochemically with the neutral open-shell triplet state with orthogonal conformation, which was characterized by EPR. The remarkably stable diradical shows kinetic stability as a result of a significant activation barrier for isomerization to a more stable neutral closed-shell folded geometry. We ascribe this activation barrier of Δ G ⧧ (293 K) = 25.7 kcal mol -1 to steric hindrance in the fjord region of the overcrowded alkene structure. The folded closed-shell state can be converted back to the diradical state by irradiation with 385 nm. The folded state can also be oxidized to the dicationic state. These types of molecules with multiple switchable states and in particular stable diradicals show great potential in the design of new functional materials such as memory devices, logic gates, and OFETs.

The dynamics of metal organic polyhedra (MOP) play a crucial role for their application in catalysis and host-guest chemistry and as functional materials. In this contribution, we study the influence of possible contaminations of different metal precursors on the kinetic properties of MOP. Exemplary five different MOP are studied with metal precursors of varying quality. The metal precursors are either obtained from commercial sources or prepared by various literature procedures. Studies into the self-assembly process using 1 H NMR and MS analyses were performed on Pt 2 L 4 , Pd 2 L 4 , Pd 6 L 12 , Pd 12 L 24 , and Ni 4 L 6 assemblies. Commonly found impurities are shown to play a prominent role guiding selective formation of MOP, as they allow for an escape from otherwise kinetically trapped intermediates. The energy requirement for selective sphere formation is significantly lowered in many examples providing evidence for a catalytic role of halide impurities/additives in the self-assembly process. Furthermore, even though most analytical features such as 1 H NMR and MS analyses show identical results for assemblies with different types of metal precursors, the dynamics of formed assemblies differs significantly if slightly less pure starting materials are used. Tiny amounts of halide contaminations make the MOP more dynamic, which can play an important role for substrate diffusion especially if bulky substrates are used. We believe that this study on the influence of impurities (which were shown to be present in some commercial sources) on the kinetic properties of MOP together with procedures of obtaining high purity metal precursors provides important information for future material preparation and provides a better understanding of already known examples.

Advances in (spectroscopic) characterization of the unusual electronic structures of open-shell cobalt complexes bearing redox-active ligands, combined with detailed mapping of their reactivity, have uncovered several new catalytic radical-type protocols that make efficient use of the synergistic properties of redox-active ligands, redox-active substrates, and the metal to which they coordinate. In this perspective, we discuss the tools available to study, induce, and control catalytic radical-type reactions with redox-active ligands and/or substrates, contemplating recent developments in the field, including some noteworthy tools, methods, and reactions developed in our own group. The main topics covered are ( i ) tools to characterize redox-active ligands; ( ii ) novel synthetic applications of catalytic reactions that make use of redox-active carbene and nitrene substrates at open-shell cobalt-porphyrins; ( iii ) development of catalytic reactions that take advantage of purely ligand- and substrate-based redox processes, coupled to cobalt-centered spin-changing events in a synergistic manner; and ( iv ) utilization of redox-active ligands to influence the spin state of the metal. Redox-active ligands have emerged as useful tools to generate and control reactive metal-coordinated radicals, which give access to new synthetic methodologies and intricate (electronic) structures, some of which are yet to be exposed., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Cobalt porphyrin complexes are established catalysts for carbene and nitrene radical group-transfer reactions. The key carbene and mono- and bisnitrene radical complexes coordinated to [Co(TPP)] (TPP = tetraphenylporphyrin) have previously been investigated with a variety of experimental techniques and supporting (single-reference) density functional theory (DFT) calculations that indicated doublet ( S = 1 / 2 ) ground states for all three species. In this contribution, we revisit their electronic structures with multireference N-electron valence state perturbation theory (NEVPT2)-complete-active-space self-consistent-field (CASSCF) calculations to investigate possible multireference contributions to the ground-state wave functions. The carbene ( [Co III (TPP)( • CHCO 2 Et)] ) and mononitrene ( [Co III (TPP)( • NNs)] ) radical complexes were confirmed to have uncomplicated doublet ground states, although a higher carbene or nitrene radical character and a lower Co- C / N bond order was found in the NEVPT2-CASSCF calculations. Supported by electron paramagnetic resonance analysis and spin counting, paramagnetic molar susceptibility determination, and NEVPT2-CASSCF calculations, we report that the cobalt porphyrin bisnitrene complex ( [Co III (TPP • )( • NNs) 2 ] ) has a quartet ( S = 3 / 2 ) spin ground state, with a thermally accesible multireference and multideterminant "broken-symmetry" doublet spin excited state. A spin flip on the porphyrin-centered unpaired electron allows for interconversion between the quartet and broken-symmetry doublet spin states, with an approximate 10-fold higher Boltzmann population of the quartet at room temperature.

The nitride salt [(PN) 2 Ti≡N{μ 2 -K(OEt 2 )}] 2 ( 1 ) (PN - = ( N -(2-P i Pr 2 -4-methylphenyl)-2,4,6-Me 3 C 6 H 2 ) can be oxidized with two equiv of I 2 or four equiv of ClCPh 3 to produce the phosphinimide-halide complexes (NPN')(PN)Ti(X) (X - = I ( 2 ), Cl ( 3 ); NPN' = N-(2-NP i Pr 2 -4-methylphenyl)-2,4,6-Me 3 C 6 H 2 2- ), respectively. In the case of 2 , H 2 was found to be one of the other products; whereas, HCPh 3 and Gomberg's dimer were observed upon the formation of 3 . Independent studies suggest that the oxidation of 1 could imply the formation of the transient nitridyl species [(PN) 2 Ti(≡N•)] ( A ), which can either oxidize the proximal phosphine atom to produce the Ti(III) intermediate [(NPN')(PN)Ti] ( B ) or, alternatively, engage in H atom abstraction to form the parent imido (PN) 2 Ti≡NH ( 4 ). The latter was independently prepared and was found to photochemically convert to the titanium-hydride, (NPN')(PN)Ti(H) ( 5 ). Isotopic labeling studies using (PN) 2 Ti≡ND ( 4 - d 1 ) as well as reactivity studies of 5 with a hydride abstractor demonstrate the presence of the hydride ligand in 5 . An alternative route to putative A was observed via a photochemically promoted incomplete reduction of the azide ligand in (PN) 2 Ti(N 3 ) ( 6 ) to 4 . This process was accompanied by some formation of 5 . Frozen matrix X-band EPR studies of 6 , performed under photolytic conditions, were consistent with species B being formed under these reaction conditions, originating from a low barrier N-insertion into the phosphine group in the putative nitridyl species A . Computational studies were also undertaken to discover the mechanism and plausibility of the divergent pathways (via intermediates A and B ) in the formation of 2 and 3 , and to characterize the bonding and electronic structure of the elusive nitrogen-centered radical in A .

The conventional method of assigning formal oxidation states (FOSs) to metals and ligands is an important tool for understanding and predicting the chemical reactivity, in particular, in catalysis research. For complexes containing redox-noninnocent ligands, the oxidation state of the ligand can be ambiguous (i.e., their spectroscopic oxidation state can differ from the FOS) and thus frustrates the assignment of the oxidation state of the metal. A quantitative correlation between the empirical metric data of redox-active ligands and their oxidation states using a metrical oxidation state (MOS) model has been developed for catecholate- and amidophenoxide-derived ligands by Brown. In the present work, we present a MOS model for 1,4-diazabutadiene (DAD n ) ligands. This model is based on a similar approach as reported by Brown, correlating the intra-ligand bond lengths of the DAD n moiety in a quantitative manner with the MOS using geometrical information from X-ray structures in the Cambridge Crystallographic Data Center (CCDC) database. However, an accurate determination of the MOS of these ligands turned out to be dependent on the coordination mode of the DAD 2- moiety, which can adopt both a planar κ 2 - N 2 -geometry and a η 4 - N 2 C 2 π-coordination mode in (transition) metal complexes in its doubly reduced, dianionic enediamide oxidation state. A reliable MOS model was developed taking the intrinsic differences in intra-ligand bond distances between these coordination modes of the DAD 2- ligand into account. Three different models were defined and tested using different geometric parameters (C═C → M distance, M-N-C angle, and M-N-C-C torsion angle) to describe the C═C backbone coordination with the metal in the η 4 - N 2 -C 2 π-coordination mode of the DAD 2- ligand. Statistical analysis revealed that the C═C → M distance best describes the η 4 - N 2 -C 2 coordination mode using a cutoff value of 2.46 Å for π-coordination. The developed MOS model was used to validate the oxidation state assignment of elements not contained within the training set (Sr, Yb, and Ho), thus demonstrating the applicability of the MOS model to a wide range of complexes. Chromium complexes with complex electronic structures were also shown to be accurately described by MOS analysis. Furthermore, it is shown that a combination of MOS analysis and FOD calculations provides an inexpensive method to gain insight into the electronic structure of singlet spin state (S = 0) [M(trop 2 dad)] transition-metal complexes showing (potential) singlet biradical character.

The synthesis of rare anionic heteroleptic and homoleptic α-diimine iron complexes is described. Heteroleptic BIAN (bis(aryl)iminoacenaphthene) complexes 1 -[K([18]c-6)(thf) 0.5 ] and 2 -[K([18]c-6)(thf) 2 ] were synthesized by reduction of the [(BIAN)FeBr 2 ] precursor complex using stoichiometric amounts of potassium graphite in the presence of the corresponding olefin. The electronic structure of these paramagnetic species was investigated by numerous spectroscopic analyses (NMR, EPR, 57 Fe Mössbauer, UV-vis), magnetic measurements (Evans NMR method, SQUID), and theoretical techniques (DFT, CASSCF). Whereas anion 1 is a low-spin complex, anion 2 consists of an intermediate-spin Fe(III) center. Both complexes are efficient precatalysts for the hydroboration of carbonyl compounds under mild reaction conditions. The reaction of bis(anthracene) ferrate(1-) gave the homoleptic BIAN complex 3 -[K([18]c-6)(thf)], which is less catalytically active. The electronic structure was elucidated with the same techniques as described for complexes 1 -[K([18]c-6)(thf) 0.5 ] and 2 -[K([18]c-6)(thf) 2 ] and revealed an Fe(II) species in a quartet ground state.

The neutral, homoleptic pyridylphosphininenickel(0) complex [Ni(2-Py-4,6-Ph 2 -PC 5 H 2 ) 2 ] ( 1 ) has been obtained by reaction of the formal Ni(0) source [(IPr)Ni(H 2 C═CHSiMe 3 ) 2 ] with 2 equiv of 2-(2'-pyridyl)-4,6-diphenylphosphinine ( L ). Compound 1 can be oxidized both electrochemically and through the use of ferrocenium salts, to afford the corresponding Ni(I) complexes [ 1 ]BF 4 , [ 1 (THF)]PF 6 , and [ 1 2 ](BAr F 4 ) 2 . The structures of these salts reveal an interesting dependence on the nature of the anion. While [ 1 ]BF 4 and [ 1 (THF)]PF 6 show trigonal-bipyramidal coordination of Ni in the solid state, [ 1 2 ](BAr F 4 ) 2 exists as a dinuclear Ni(I) complex and possesses a bridging phosphinine moiety in a rare μ 2 mode. Reactions of 1 with halobenzenes highlight the noninnocent behavior of the aromatic phosphinine ligand, leading to the formation of oxidized Ni complexes but not to classical oxidative addition products. The reaction of 1 with bromobenzene affords the λ 5 phosphinine 2 and the bipyramidal Ni(I) complex [ 1 ]Br, whereas a more unconventional oxidation product 3 is formed from the reaction of 1 and iodobenzene.

The oxidation state of the redox noninnocent tetra-amido macrocyclic ligand (TAML) scaffold was recently shown to affect the formation of nitrene radical species on cobalt(III) upon reaction with PhI=NNs [van Leest N. P.; J. Am. Chem. Soc.2020, 142, 552-563]. For the neutral [Co III (TAML sq )] complex, this leads to the doublet ( S  = 1/2) mono-nitrene radical species [Co III (TAML q )(N • Ns)(Y)] (bearing an unidentified sixth ligand Y in at least the frozen state), while a triplet ( S = 1) bis-nitrene radical species [Co III (TAML q )(N • Ns) 2 ] - is generated from the anionic [Co III (TAML red )] - complex. The one-electron-reduced Fischer-type nitrene radicals (N • Ns - ) are formed through single (mono-nitrene) or double (bis-nitrene) ligand-to-substrate single-electron transfer (SET). In this work, we describe the reactivity and mechanisms of these nitrene radical complexes in catalytic aziridination. We report that [Co III (TAML sq )] and [Co III (TAML red )] - are both effective catalysts for chemoselective (C=C versus C-H bonds) and diastereoselective aziridination of styrene derivatives, cyclohexane, and 1-hexene under mild and even aerobic (for [Co III (TAML red )] - ) conditions. Experimental (Hammett plots; [Co III (TAML)] -nitrene radical formation and quantification under catalytic conditions; single-turnover experiments; and tests regarding catalyst decomposition, radical inhibition, and radical trapping) in combination with computational (density functional theory (DFT), N-electron valence state perturbation theory corrected complete active space self-consistent field (NEVPT2-CASSCF)) studies reveal that [Co III (TAML q )(N • Ns)(Y)] , [Co III (TAML q )(N • Ns) 2 ] - , and [Co III (TAML sq )(N • Ns)] - are key electrophilic intermediates in aziridination reactions. Surprisingly, the electrophilic one-electron-reduced Fischer-type nitrene radicals do not react as would be expected for nitrene radicals (i.e., via radical addition and radical rebound). Instead, nitrene transfer proceeds through unusual electronically asynchronous transition states, in which the (partial) styrene substrate to TAML ligand (single-) electron transfer precedes C-N coupling. The actual C-N bond formation processes are best described as involving a nucleophilic attack of the nitrene (radical) lone pair at the thus (partially) formed styrene radical cation. These processes are coupled to TAML-to-cobalt and cobalt-to-nitrene single-electron transfer, effectively leading to the formation of an amido-γ-benzyl radical (NsN - -CH 2 - • CH-Ph) bound to an intermediate spin ( S = 1) cobalt(III) center. Hence, the TAML moiety can be regarded to act as a transient electron acceptor, the cobalt center behaves as a spin shuttle, and the nitrene radical acts as a nucleophile. Such a mechanism was hitherto unknown for cobalt-catalyzed hypovalent group transfer and the more general transition-metal-catalyzed nitrene transfer to alkenes but is now shown to complement the known concerted and stepwise mechanisms for N-group transfer., Competing Interests: The authors declare no competing financial interest.

The redox noninnocence of the TAML scaffold in cobalt-TAML (tetra-amido macrocyclic ligand) complexes has been under debate since 2006. In this work, we demonstrate with a variety of spectroscopic measurements that the TAML backbone in the anionic complex [Co III (TAML red )] - is truly redox noninnocent and that one-electron oxidation affords [Co III (TAML sq )] . Multireference (CASSCF) calculations show that the electronic structure of [Co III (TAML sq )] is best described as an intermediate spin ( S = 1) cobalt(III) center that is antiferromagnetically coupled to a ligand-centered radical, affording an overall doublet (S = 1 / 2 ) ground-state. Reaction of the cobalt(III)-TAML complexes with PhINNs as a nitrene precursor leads to TAML-centered oxidation and produces nitrene radical complexes without oxidation of the metal ion. The ligand redox state (TAML red or TAML sq ) determines whether mono- or bis-nitrene radical complexes are formed. Reaction of [Co III (TAML sq )] or [Co III (TAML red )] - with PhINNs results in the formation of [Co III (TAML q )(N • Ns)] and [Co III (TAML q )(N • Ns) 2 ] - , respectively. Herein, ligand-to-substrate single-electron transfer results in one-electron-reduced Fischer-type nitrene radicals (N • Ns - ) that are intermediates in catalytic nitrene transfer to styrene. These nitrene radical species were characterized by EPR, XANES, and UV-vis spectroscopy, high-resolution mass spectrometry, magnetic moment measurements, and supporting CASSCF calculations.

Direct synthetic routes to amidines are desired, as they are widely present in many biologically active compounds and organometallic complexes. N -Acyl amidines in particular can be used as a starting material for the synthesis of heterocycles and have several other applications. Here, we describe a fast and practical copper-catalyzed three-component reaction of aryl acetylenes, amines, and easily accessible 1,4,2-dioxazol-5-ones to N -acyl amidines, generating CO 2 as the only byproduct. Transformation of the dioxazolones on the Cu catalyst generates acyl nitrenes that rapidly insert into the copper acetylide Cu-C bond rather than undergoing an undesired Curtius rearrangement. For nonaromatic dioxazolones, [Cu(OAc)(Xantphos)] is a superior catalyst for this transformation, leading to full substrate conversion within 10 min. For the direct synthesis of N -benzoyl amidine derivatives from aromatic dioxazolones, [Cu(OAc)(Xantphos)] proved to be inactive, but moderate to good yields were obtained when using simple copper(I) iodide (CuI) as the catalyst. Mechanistic studies revealed the aerobic instability of one of the intermediates at low catalyst loadings, but the reaction could still be performed in air for most substrates when using catalyst loadings of 5 mol %. The herein reported procedure not only provides a new, practical, and direct route to N -acyl amidines but also represents a new type of C-N bond formation.

Iron catalyzed carbon-nitrogen bond formation reactions of a wide variety of nucleophiles and aryl halides using well-defined iron-complexes featuring redox noninnocent 2-(arylazo)-1,10-phenanthroline (L 1 ) ligands are reported. Besides substrate centered C-N coupling, C-N bond formation reactions were also observed at the ortho- and para-positions of the phenyl ring of the coordinated azo-aromatic scaffolds affording new tetradentate ligands, 2-N-aryl-(2-arylazo)-1,10-phenanthroline (L 2 ), and tridentate ligands, 4 -N-aryl-(2-arylazo)-1,10-phenanthroline (L 3 ), respectively. Control experiments and mechanistic studies reveal that the complex [FeL 1 Cl 2 ] (1) undergoes in situ reduction during the catalytic reaction to produce the monoanionic complex [1] - , which then acts as the active catalyst. The metal (iron) and the coordinated ligand were found to work in a cooperative manner during the transfer processes involved in the fundamental steps of the catalytic cycle. Detailed experimental and theoretical (DFT) studies were performed to get insight into the competitive substrate versus ligand centered amination reactions.

The mechanism for complete dehydrogenation of aqueous methanol to CO 2 and three equivalents of H 2 catalyzed by [Ru(trop 2 dad)] was investigated with DFT (trop 2 dad = 1,4-bis(5 H-dibenzo[ a, d]cyclohepten-5-yl)-1,4-diazabuta-1,3-diene). To date, this is the only catalyst that promotes the acceptorless dehydrogenation of aqueous methanol in homogeneous phase under mild conditions without the addition of an additive (base, acid, or a secondary catalyst). A detailed understanding of the mechanism of this transformation may therefore be of significant importance for the conversion of liquid organic fuels. Previous computational studies using simplified models of the catalyst suggested entirely ligand-centered reaction pathways with rather high-energy barriers for complete dehydrogenation of aqueous methanol. These are, however, not consistent with the experimental data. In the present paper, we reveal a different reaction mechanism for aqueous methanol dehydrogenation that involves metal-ligand cooperativity involving the diazadiene (dad) ligand and has substantially lower barriers, in good agreement with the experimental data. The dad moiety of the ligand actively participates in the alcohol activation mechanism. In the first step of the reaction, the dad ligand rearranges from a σ- to a π-bound coordination mode. This adjusts the electronic structure of both the metal and the ligand, leading to an enhanced Brønsted basicity of the nitrogen centers and higher Lewis acidity of the ruthenium center. As a result, concerted proton-hydride transfer to/from metal-hydride and N-protonated dad-ligand moieties becomes possible, leading to low-barrier metal-ligand cooperative elementary steps for alcohol activation and H 2 elimination.

Herein we describe the Rh-catalyzed C1 polymerization of silyl-protected diazoacetates of the general formula HC(=N 2 )C(=O)O(CH 2 ) x OSiR 3 , where x = 2-5. After polymerization and subsequent desilylation, syndiotactic polymers bearing a hydroxy-containing side group on every backbone carbon are obtained. The molecular weight of the desired polymers can be controlled via chain transfer with methanol during the polymerization. The produced polymers are compared to atactic analogues formed by [(η 3 -C 3 H 5 )PdCl]-catalyzed polymerization of silyl-protected diazoacetates with the same general formula. While the polymers produced by the Rh and Pd catalysts have the same hydrophilic/hydrophobic balance, the stereoregularity of the polymers formed by the Rh catalyst was found to be of influence on the thermoresponsive behavior of the polymer. The effect of this stereoregularity on the thermoresponsive phase separation behavior of the produced polymers in aqueous solution was investigated., Competing Interests: The authors declare no competing financial interest.

Insights into the mechanism of the catalytic cycle for methanol dehydrogenation catalyzed by a highly active PNP pincer ruthenium complex in methanol solvent are presented, using DFT-based molecular dynamics with an explicit description of the solvent, as well as static DFT calculations using microsolvation models. In contrast to previous results, we find the amido moiety of the catalyst to be permanently protonated under catalytic conditions. Solvent molecules actively participate in crucial reaction steps and significantly affect the reaction barriers when compared to pure gas-phase models, which is a direct result of the enhanced solvent stabilization of methoxide anion intermediates. Further, the calculations reveal that this system does not operate via the commonly assumed Noyori-type outer-sphere metal-ligand cooperative pathway. Our results show the importance of incorporating a molecular description of the solvent to gain a deeper and accurate understanding of the reaction pathways, and stress on the need to involve explicit solvent molecules to model complex catalytic processes in a realistic manner., Competing Interests: The authors declare no competing financial interest.

A new family of low-coordinate Co complexes supported by three redox-noninnocent tridentate [OCO] pincer-type bis(phenolate) N-heterocyclic carbene (NHC) ligands are described. Combined experimental and computational data suggest that the charge-neutral four-coordinate complexes are best formulated as Co(II) centers bound to closed-shell [OCO] 2- dianions, of the general formula [(OCO)Co II L] (where L is a solvent-derived MeCN or THF). Cyclic voltammograms of the [(OCO)Co II L] complexes reveal three oxidations accessible at potentials below 1.2 V vs Fc + /Fc, corresponding to generation of formally Co(V) species, but the true physical/spectroscopic oxidation states are much lower. Chemical oxidations afford the mono- and dications of the imidazoline NHC-derived complex, which were examined by computational and magnetic and spectroscopic methods, including single-crystal X-ray diffraction. The metal and ligand oxidation states of the monocationic complex are ambiguous; data are consistent with formulation as either [( S OCO)Co III (THF) 2 ] + containing a closed-shell [ S OCO] 2- diphenolate ligand bound to a S = 1 Co(III) center, or [( S OCO • )Co II (THF) 2 ] + with a low-spin Co(II) ion ferromagnetically coupled to monoanionic [ S OCO • ] - containing a single unpaired electron distributed across the [OCO] framework. The dication is best described as [( S OCO 0 )Co II (THF) 3 ] 2+ , with a single unpaired electron localized on the d 7 Co(II) center and a doubly oxidized, charge-neutral, closed-shell S OCO 0 ligand. The combined data provide for the first time unequivocal and structural evidence for [OCO] ligand redox activity. Notably, varying the degree of unsaturation in the NHC backbone shifts the ligand-based oxidation potentials by up to 400 mV. The possible chemical origins of this unexpected shift, along with the potential utility of the [OCO] pincer ligands for base-metal-mediated organometallic coupling catalysis, are discussed.

Coordination of FeCl 3 to the redox-active pyridine-aminophenol ligand NNO H2 in the presence of base and under aerobic conditions generates FeCl 2 (NNO ISQ ) (1), featuring high-spin Fe III and an NNO ISQ radical ligand. The complex has an overall S = 2 spin state, as deduced from experimental and computational data. The ligand-centered radical couples antiferromagnetically with the Fe center. Readily available, well-defined, and air-stable 1 catalyzes the challenging intramolecular direct C(sp 3 )-H amination of unactivated organic azides to generate a range of saturated N-heterocycles with the highest turnover number (TON) (1 mol% of 1, 12 h, TON = 62; 0.1 mol% of 1, 7 days, TON = 620) reported to date. The catalyst is easily recycled without noticeable loss of catalytic activity. A detailed kinetic study for C(sp 3 )-H amination of 1-azido-4-phenylbutane (S 1 ) revealed zero order in the azide substrate and first order in both the catalyst and Boc 2 O. A cationic iron complex, generated from the neutral precatalyst upon reaction with Boc 2 O, is proposed as the catalytically active species.

The synthesis, spectroelectrochemical characterization (ultraviolet-visible and nuclear magnetic resonance), solid state structures, and computational metric parameters of three isostructural PdCl(NNO) complexes 1 [PdCl(NNO(ISQ))], 2 {[PdCl(NNO(AP))](-)}, and 5 {[PdCl(NNO(IBQ))](+)} (NNO = o-aminophenol-derived redox-active ligand with a pendant pyridine) with different NNO oxidation states are described. The reduced diamagnetic complex 2 readily reacts with halogenated solvents, including lattice solvent from crystalline pure material, as supported by spectroscopic data and density functional theory calculations. Thorough removal of chlorinated impurities allows for modest catalytic turnover in the conversion of 4-phenylbutyl azide into N-protected 2-phenylpyrrolidine, which is the first example of a palladium-catalyzed radical-type transformation facilitated by a redox-active ligand as well as the first C-H amination mediated by ligand-to-substrate single-electron transfer.

Two nickel(II)-complexes, [Ni(II)(H3L)2](ClO4)2 ([1](ClO4)2) and [Ni(II)(HL)2] (2), containing the redox-active tridentate ligand N(1)-(2-aminophenyl)benzene-1,2-diamine (H3L) have been synthesized. Complex [1](ClO4)2 is octahedral containing two neutral H3L ligands in a facial coordination mode, whereas complex 2 is a singlet diradical species with approximately planar configuration at the tetracoordinate metal atom with two pendant NH2 side arms from each of the coordinated ligands. Both complexes are found to be chemically interconvertible; complex [1](2+) gets converted to complex 2 when exposed to base and oxygen via simultaneous deprotonation and oxidation of the coordinated ligands. Molecular and electronic structures of the isolated complexes are scrutinized thoroughly by various spectroscopic techniques, single crystal X-ray crystallography, and density functional theory. The observed dissociation of a ligand arm upon oxidation of the ligand was exploited to bring about catalytic alcohol oxidation using coordinatively saturated complex [1](ClO4)2 as a catalyst precursor. Both the complexes [1](ClO4)2and 2 were tested for catalytic oxidation of both primary and secondary alcohols.

The 17 valence electron (VE) open-shell nickel gallanediyl complex [Cp(Ar)Ni{Ga(nacnac)}] (3, Ar = C5(C6H4-4-Et)5, nacnac = HC[C(Me)N(C6H3-2,6-iPr2)]2), having an unsupported Ni-Ga bond, was synthesized from [Cp(Ar)Ni(μ-Br)]2 (1) by reducing the adduct [Cp(Ar)Ni(μ-Br){Ga(nacnac)}] (2) or, alternatively, trapping the "Cp(Ar)Ni(I)" synthon with Ga(nacnac); spectroscopic and DFT studies showed that the single unpaired electron in 3 resides mainly at the Ni center.

The diiridium complex [{Ir(ABPN2)(CO)}2(μ-CO)] (1; [ABPN2](-) = [(allyl)B(Pz)2(CH2PPh2)](-)) reacts with diphenylphosphane affording [Ir(ABPN2)(CO)(H) (PPh2)] (2), the product of the oxidative addition of the P-H bond to the metal. DFT studies revealed a large contribution of the terminal phosphanido lone pair to the HOMO of 2, indicating nucleophilic character of this ligand, which is evidenced by reactions of 2 with typical electrophiles such as H(+), Me(+), and O2. Products from the reaction of 2 with methyl chloroacetate were found to be either [Ir(ABPN2)(CO)(H)(PPh2CH2CO2Me)][PF6] ([6]PF6) or [Ir(ABPN2)(CO)(Cl)(H)] (7) and the free phosphane (PPh2CH2CO2Me), both involving P-C bond formation, depending on the reaction conditions. New complexes having iridacyclophosphapentenone and iridacyclophosphapentanone moieties result from reactions of 2 with dimethyl acetylenedicarboxylate and dimethyl maleate, respectively, as a consequence of a further incorporation of the carbonyl ligand. In this line, the terminal alkyne methyl propiolate gave a mixture of a similar iridacyclophosphapentanone complex and [Ir(ABPN2){CH═C(CO2Me)-CO}{PPh2-CH═CH(CO2Me)}] (10), which bears the functionalized phosphane PPh2-CH═CH(CO2Me) and an iridacyclobutenone fragment. Related model reactions aimed to confirm mechanistic proposals are also studied.

The redox series [Ir(n)(NHx)(PNP)] (n = II-IV, x = 3-0; PNP = N(CHCHPtBu2)2) was examined with respect to electron, proton, and hydrogen atom transfer steps. The experimental and computational results suggest that the Ir(III) imido species [Ir(NH)(PNP)] is not stable but undergoes disproportionation to the respective Ir(II) amido and Ir(IV) nitrido species. N-H bond strengths are estimated upon reaction with hydrogen atom transfer reagents to rationalize this observation and are used to discuss the reactivity of these compounds toward E-H bond activation.