Search

Li-O 2 batteries offer a high theoretical discharge capacity due to the formation of light discharged species such as Li 2 O 2 , which fill the porous positive electrode. However, in practice, it is challenging to reach the theoretical capacity and completely utilize the full electrode pore volume during discharge. With the formation of discharge products, the porous medium evolves, and the porosity and tortuosity factor of the positive electrode are altered through shrinkage and clogging of pores. A pore shrinks as solid discharge products accumulate, the pore clogging when it is filled (or when access is blocked). In this study, we investigate the structural evolution of the positive electrode through a combination of experimental and computational techniques. Pulsed field gradient nuclear magnetic resonance results show that the electrode tortuosity factor changes much faster than suggested by the Bruggeman relation (an equation that empirically links the tortuosity factor to the porosity) and that the electrolyte solvent affects the tortuosity factor evolution. The latter is ascribed to the different abilities of solvents to dissolve reaction intermediates, which leads to different discharge product particle sizes: on discharging using 0.5 M LiTFSI in dimethoxyethane, the tortuosity factor increases much faster than for discharging in 0.5 M LiTFSI in tetraglyme. The correlation between a discharge product size and tortuosity factor is studied using a pore network model, which shows that larger discharge products generate more pore clogging. The Knudsen diffusion effect, where collisions of diffusing molecules with pore walls reduce the effective diffusion coefficients, is investigated using a kinetic Monte Carlo model and is found to have an insignificant impact on the effective diffusion coefficient for molecules in pores with diameters above 5 nm, i.e. , most of the pores present in the materials investigated here. As a consequence, pore clogging is thought to be the main origin of tortuosity factor evolution., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

A synchrotron transmission X-ray microscopy tomography system with a spatial resolution of 58.2 nm at the Advanced Photon Source was employed to obtain three-dimensional morphological data of all-solid Li-ion battery electrodes. The three-phase electrode was fabricated from a 47:47:6 (wt %) mixture of Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 as active material, Li 1.3 Ti 1.7 Al 0.3 (PO 4 ) 3 as Li-ion conductor, and Super-P carbon as electron conductor. The geometric analysis show that particle-based all-solid Li-ion battery has serious contact interface problem which significantly impact the Li-ion transport and intercalation reaction in the electrode, leading to low capacity, poor rate capability and cycle life.

While large dispersions in electrochemical performance have been reported for lithium oxygen batteries in the literature, they have not been investigated in any depth. The variability in the results is often assumed to arise from differences in cell design, electrode structure, handling and cell preparation at different times. An accurate theoretical framework turns out to be needed to get a better insight into the mechanisms underneath and to interpret experimental results. Here, we develop and use a pore network model to simulate the electrochemical performance of three-dimensionally resolved lithium-oxygen cathode mesostructures obtained from TXM nanocomputed tomography. We apply this model to the 3D reconstructed object of a Super P carbon electrode and calculate discharge curves, using identical conditions, for four different zones in the electrode and their reversed configurations. The resulting galvanostatic discharge curves show some dispersion, (both in terms of capacity and overpotential) which we attribute to the way pores are connected with each other. Based on these results, we propose that the stochastic nature of pores interconnectivity and the microscopic arrangement of pores can lead, at least partially, to the variations in electrochemical results observed experimentally.

Nanoporous materials, especially those fabricated by liquid metal dealloying processes, possess great potential in a wide range of applications due to their high surface area, bicontinuous structure with both open pores for transport and solid phase for conductivity or support, and low material cost. Here, we used X-ray nanotomography and X-ray fluorescence microscopy to reveal the three-dimensional (3D) morphology and elemental distribution within materials. Focusing on nanoporous stainless steel, we evaluated the 3D morphology of the dealloying front and established a quantitative processing-structure-property relationship at a later stage of dealloying. The morphological differences of samples created by liquid metal dealloying and aqueous dealloying methods were also discussed. We concluded that it is particularly important to consider the dealloying, coarsening, and densification mechanisms in influencing the performance-determining, critical 3D parameters, such as tortuosity, pore size, porosity, curvature, and interfacial shape.

The mobility of toxic elements, such as lead (Pb) can be attenuated by adsorption, incorporation, and precipitation on carbonate minerals in subsurface environments. Here, we report a study of the bulk transformation of single-crystal calcite (CaCO 3 ) into polycrystalline cerussite (PbCO 3 ) through reaction with acidic Pb-bearing solutions. This reaction began with the growth of a cerussite shell on top of calcite surfaces followed by the replacement of the remaining calcite core. The external shape of the original calcite was preserved by a balance between calcite dissolution and cerussite growth controlled by adjusting the Pb 2+ concentration and pH. The relation between the rounded calcite core and the surrounding lath-shaped cerussite aggregates was imaged by transmission X-ray microscopy, which revealed preferentially elongated cerussite crystals parallel to the surface and edge directions of calcite. The replacement reaction involved concurrent development of ∼100 nm wide pores parallel to calcite c-glide or (12̅0) planes, which may have provided permeability for chemical exchange during the reaction. X-ray reflectivity measurements showed no clear epitaxial relation of cerussite to the calcite (104) surface. These results demonstrate Pb sequestration through mineral replacement reactions and the critical role of nanoporosity (3% by volume) on the solid phase transformation through a dissolution-recrystallization mechanism.

Because of their complex genesis, rocks and geomaterials are commonly polycrystalline heterogeneous systems, with various scale-level chemical and structural heterogeneities. Like most other μ-analytical techniques relying on scanning instruments with pencil-beam, the X-ray absorption near edge structure (XANES) technique allows elemental oxidation states to be probed with high spatial resolution but suffers from long acquisition times, imposing practical limits on the field of view. Now, regions of interest of sample are generally several orders of magnitude larger than the beam size. Here, we show the potential of coupling XANES and full-field absorption radiographies with a large hard X-ray beam. Thanks to a new setup, which allows both the acquisition of a XANES image stack and the execution of polarization contrast imaging, 1 to 4 mega-pixel crystallographic orientations and Fe oxidation state mapping corrected from polarization effects are obtained in a couple of hours on polycrystalline materials with submicrometric resolution. The demonstration is first carried out on complex metamorphic rocks, where Fe(3+)/Fe(total) images reveal subtle redox variations within single mineralogical phases. A second application concerns a bentonite analogue considered for nuclear waste and CO(2) storage. Proportion mappings of finely mixed phases are extracted from hyperspectral data, imaging the spatial progress of reaction processes essential for the safety of such storage systems.