Search

Proteolyzed peptides provide the basis for mass-analyzed hydrogen/deuterium exchange (HDX) for mapping solvent access to various segments of solution-phase proteins. Aspergillus sa/roi protease type XIII and porcine pepsin can generate peptides of overlapping sequences and high sequence coverage. However, ff disulfide bonds are present, proteolysis can be severely limited, particularly in the vicinity of the disulfide linkage(s). Disulfide bonds cannot be reduced before or during the H/D exchange reaction without affecting the protein higher-order structure. Here, we demonstrate simultaneous quench/digestion/reduction following H/D exchange, for subsequent mass analysis. Proteolysis is conducted in the presence oftris(2-carboxyethyl)phosphine hydrochloride (TCEP x HCl) and urea, and all other steps of the H/D exchange and analysis are maintained. This method yields dramatically increased sequence coverage and localization of solvent-exposed segments for mass-analyzed solution-phase H/D exchange of proteins containing disulfide bonds. 10.1021/ac902550n

Solution-phase hydrogen/deuterium exchange (HDX) monitored by high-resolution Fourier transform ion cyclotron resonance (FTICR) mass spectrometry offers a rapid method to study protein conformations and protein--protein interactions. Pepsin is usually used to digest proteins in HDX and is known for lack of cleavage specificity. To improve digestion efficiency and specificity, we have optimized digestion conditions and cleavage preferences for pepsin and protease type XIII from Aspergillus saitoi. A dilution series of the proteases was used to determine the digestion efficiency for several test proteins. Protease type XIII prefers to cleave on the C-terminal end of basic amino acids and produced the highest number of fragments and the best sequence coverage compared to pepsin or protease type XVIII from Rhizhopus. Furthermore, protease type XIII exhibited much less self-digestion than pepsin and thus is superior for HDX experiments. Many highly overlapped segments from protease type XIII and pepsin digestion, combined with high-resolution FTICR mass spectrometry, provide high sequence resolution (to as few as one or two amino acids) for the assignment of amide hydrogen exchange rate. Our H/D exchange results correlate well with the secondary and tertiary structure of myoglobin. Such assignments of highly overlapped fragments promise to greatly enhance the accuracy and sequence resolution for determining conformational differences resulting from ligand binding or protein--protein interactions.

Bispecific antibodies have great potential to be the next-generation Hole-hole homodimer after storage at 2-8 °c biotherapeutics due to their ability to simultaneously recognize two different targets. Compared to conventional monoclonal antibodies, knob-into-hole bispecific antibodies face unique challenges in production and characterization due to the increase in variant possibilities, such as homodimerization in covalent and noncovalent forms. In this study, a storage-and pH-sensitive hydrophobic interaction chromatography (HIC) profile change was observed for the hole-hole homodimer, and the multiple HIC peaks were explored and shown to be conformational isomers. We combined traditional analytical methods with hydrogen/deuterium exchange mass spectrometry (HDX MS), native mass spectrometry, and negative-staining electron microscopy to comprehensively characterize the hole-hole homodimer. HDX MS revealed conformational changes at the resolution of a few amino acids overlapping the CH2-CH3 domain interface. Conformational heterogeneity was also assessed by HDX MS isotopic distribution. The hole-hole homodimer was demonstrated to adopt a more homogeneous conformational distribution during storage. This conformational change is likely caused by a lack of CH3 domain dimerization (due to the three "hole" point mutations), resulting in a unique storage-and pH-dependent conformational destabilization and refolding of the hole-hole homodimer Fc. Compared with the hole-hole homodimer under different storage conditions, the bispecific heterodimer, guided by the knob-into-hole assembly, proved to be a stable conformation with homogeneous distribution, confirming its high quality as a desired therapeutic. Functional studies by antigen binding and neonatal Fc receptor (FcRn) binding correlated very well with the structural characterization. Comprehensive interpretation of the results has provided a better understanding of both the homodimer variant and the bispecific molecule. [ABSTRACT FROM AUTHOR]

Mass analysis of proteolytic fragment peptides following hydrogen/deuterium exchange offers a general measure of solvent accessibility/hydrogen bonding (and thus conformation) of solution-phase proteins and their complexes. The primary problem in such mass analyses is reliable and rapid assignment of mass spectral peaks to the correct charge state and degree of deuteration of each fragment peptide, in the presence of substantial overlap between isotopic distributions of target peptides, autolysis products, and other interferant species. Here, we show that at sufficiently high mass resolving power (m/Δm50% ≥ 100,000), it becomes possible to resolve enough of those overlaps so that automated data reduction becomes possible, based on the actual elemental composition of each peptide without the need to deconvolve isotopic distributions. We demonstrate automated, rapid, reliable assignment of peptide masses from H/D exchange experiments, based on electrospray ionization FT-ICR mass spectra from H/D exchange of solution-phase myoglobin. Combined with previously demonstrated automated data acquisition for such experiments, the present data reduction algorithm enhances automation (and thus expands generality and applicability) for high-resolution mass spectrometry-based analysis of H/D exchange of solution-phase proteins. [Copyright &y& Elsevier]

In solution-phase hydrogen/deuterium exchange (HDX), it is essential to minimize the back-exchange level of H for D after the exchange has been quenched, to accurately assign protein conformation and protein–protein or protein–ligand interactions. Reversed-phase HPLC is conducted at low pH and low temperature to desalt and separate proteolytic fragments. However, back exchange averages roughly 30% because of the long exposure to H2O in the mobile phase. In this report, we first show that there is no significant backbone amide hydrogen back exchange during quench and digestion; backbone exchange occurs primarily during subsequent liquid chromatography separation. We then show that a rapid reversed-phase separation reduces back exchange for HDX by at least 25%, resulting from the dramatically reduced retention time of the peptide fragments on the column. The influence of retention time on back exchange was also evaluated. The rapid separation coupled with high-resolution FT-ICR MS at 14.5 T provides high amino acid sequence coverage, high sample throughput, and high reproducibility and reliability. [Copyright &y& Elsevier]

Bispecific antibodies (BsAbs) have drawn increasing interest in the biopharmaceutical industry due to their advantage to bind two distinct antigens simultaneously. The knob-into-hole approach is an effective way to produce bispecific antibodies by driving heterodimerization with mutations in the CH3 domain of each half antibody. To better understand the conformational impact by the knob and hole mutations, we combined size-exclusion chromatography (SEC), differential scanning calorimetry (DSC), and hydrogen-deuterium exchange mass spectrometry (H/D exchange MS), to characterize the global and peptide-level conformational changes. We found no significant alteration in structure or conformational dynamics induced by the knob-into-hole framework, and the conformational stability is similar to the wild-type (WT) IgG4 molecules (except for some small difference in the CH3 domain) expressed in E. coli . Functional studies including antigen-binding and neonatal fragment crystallizable (Fc) receptor (FcRn) binding demonstrated no difference between the knob-into-hole and WT IgG4 molecules in E. coli .

Hydrogen-deuterium exchange mass spectrometry (HDX-MS) is an established, powerful tool for investigating protein-ligand interactions, protein folding, and protein dynamics. However, HDX-MS is still an emergent tool for quality control of biopharmaceuticals and for establishing dynamic similarity between a biosimilar and an innovator therapeutic. Because industry will conduct quality control and similarity measurements over a product lifetime and in multiple locations, an understanding of HDX-MS reproducibility is critical. To determine the reproducibility of continuous-labeling, bottom-up HDX-MS measurements, the present interlaboratory comparison project evaluated deuterium uptake data from the Fab fragment of NISTmAb reference material (PDB: 5K8A ) from 15 laboratories. Laboratories reported ∼89 800 centroid measurements for 430 proteolytic peptide sequences of the Fab fragment (∼78 900 centroids), giving ∼100% coverage, and ∼10 900 centroid measurements for 77 peptide sequences of the Fc fragment. Nearly half of peptide sequences are unique to the reporting laboratory, and only two sequences are reported by all laboratories. The majority of the laboratories (87%) exhibited centroid mass laboratory repeatability precisions of ⟨ s Lab ⟩ ≤ (0.15 ± 0.01) Da (1σ x̅ ). All laboratories achieved ⟨s Lab ⟩ ≤ 0.4 Da. For immersions of protein at T HDX = (3.6 to 25) °C and for D 2 O exchange times of t HDX = (30 s to 4 h) the reproducibility of back-exchange corrected, deuterium uptake measurements for the 15 laboratories is σ reproducibility 15 Laboratories ( t HDX ) = (9.0 ± 0.9) % (1σ). A nine laboratory cohort that immersed samples at T HDX = 25 °C exhibited reproducibility of σ reproducibility 25C cohort ( t HDX ) = (6.5 ± 0.6) % for back-exchange corrected, deuterium uptake measurements.

Accurate and precise quantitative measurement of product-related variants of a therapeutic antibody is essential for product development and testing. Bispecific antibodies (bsAbs) are Abs composed of two different half antibody arms, each of which recognizes a distinct target, and recently they have attracted substantial therapeutic interest. Because of the increased complexity of its structure and its production process, as compared to a conventional monoclonal antibody, additional product-related variants, including covalent and noncovalent homodimers of half antibodies (hAbs), may be present in the bsAb product. Sufficient separation and reliable quantitation of these bsAb homodimers using liquid chromatography (LC) or capillary electrophoresis-based methods is challenging because these homodimer species and the bsAb often have similar physicochemical properties. Formation of noncovalent homodimers and heterodimers can also occur. In addition, since homodimers share common sequences with their corresponding halves and bsAb, it is not suitable to use peptides as surrogates for their quantitation. To tackle these analytical challenges, we developed a mass spectrometry-based quantitation method. Chip-based nanoflow LC-time-of-flight mass spectrometry coupled with a standard addition approach provided unbiased absolute quantitation of these drug-product-related variants. Two methods for the addition of known levels of standard (multi- or single-addition) were evaluated. Both methods demonstrated accurate and reproducible quantitation of homodimers at the 0.2% (w/w) level, with the single-addition method having the promise of higher analytical throughput.

The epitopes of a homohexameric food allergen protein, cashew Ana o 2, identified by two monoclonal antibodies, 2B5 and 1F5, were mapped by solution-phase amide backbone H/D exchange (HDX) coupled with Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) and the results were compared to previous mapping by immunological and mutational analyses. Antibody 2B5 defines a conformational epitope, and 1F5 defines a linear epitope. Intact murine IgG antibodies were incubated with recombinant Ana o 2 (rAna o 2) to form antigen-monoclonal antibody (Ag-mAb) complexes. mAb-complexed and uncomplexed (free) rAna o 2 were then subjected to HDX. HDX instrumentation and automation were optimized to achieve high sequence coverage by protease XIII digestion. The regions protected from H/D exchange upon antibody binding overlap and thus confirm the previously identified epitope-bearing segments: the first extension of HDX monitored by mass spectrometry to a full-length antigen-antibody complex in solution.

As it is becoming accepted that allosteric regulation can occur through a change in local conformational equilibria as opposed to a change in overall static structure, a thorough description of the structural aspects of these types of mechanisms will be essential to understanding this fundamental biological process. Here we report the experimental identification of key regions of conformational perturbation in the allosteric network of a large (144 kDa), multidomain enzyme by use of solution-phase hydrogen/deuterium exchange. Large perturbations in the regulatory domain induced by effector molecule binding are linked to a very specific, targeted perturbation in the active site, some 50 A away. Binding of L-leucine to an enzyme variant (Y410F) that is kinetically insensitive to effector binding was shown to elicit similar changes in the regulatory domain, but perturbs an alternate region of the catalytic domain, consistent with the proposed allosteric mechanism. These results comprise one of the first reports of an experimentally mapped allosteric mechanism in a protein of this size and provide necessary information to be used toward the development of allostery-based drugs or enzymes with engineered regulatory properties.

Five dual-quinquethiophene self-assemblies are prepared on a highly oriented pyrolytic graphite (HOPG) surface. The dual-quinquethiophenes are quinquethiophenes (5T)-di to hexamethylene (n, 2-6)-quinquethiophenes (5T), abbreviated as 5T-n-5T (n = 2-6). The effect of the bridge alkylene chains on the structure and property of the five assemblies are investigated by scanning tunneling microscopy (STM). It is found that all 5T-n-5T molecules form ordered adlayers on a HOPG surface with stripe feature. The alkylene bridge part in a molecule appears in a dark contrast in an STM image. Intriguingly, the thiophene backbones of individual molecules in the adlayer always keep an angle with the direction of molecular stripes. With alkylene bridge length increasing, different structures are found in 5T-5-5T and 5T-6-5T assemblies. To understand the effect of bridge chains on single molecular property, scanning tunneling spectroscopy is used to probe the electronic property of the different adlayers. The results will be important in surface engineering by self-assembly and molecular device fabrication with oligothiophenes.