Search

The interaction of tetramethylammonium acetate with [(MeCN) 2 Ni(CF 3 ) 2 ], [(MeCN) 2 Ni(C 2 F 5 ) 2 ], and [NMe 4 ][(MeCN)Ni(CF 3 ) 3 ] was explored by 19 F NMR spectroscopy. We show that depending on the nature of the nickel complex, one or two acetate ligands can add to the metal center and replace the nickel-bound MeCN ligands, depending on the acetate concentration. The number of acetates that could bind to nickel, and whether the resulting complex exists as a monomer or dimer, was determined to be dependent on the nature of the fluoroalkyl ligand. Moreover, we observe that oxidation of the nickel center of [(MeCN) 2 Ni(CF 3 ) 2 ] in the presence of two equivalents of acetate leads cleanly to the octahedral, paramagnetic (EPR spectroscopy), and anionic Ni(III) complex [NMe 4 ][Ni(CF 3 ) 2 (OAc) 2 ]., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Nickel anions [(MeCN)Ni(CF 3 ) 3 ] - and [Ni(CF 3 ) 4 ] 2- were prepared by the formal addition of 3 and 4 equiv, respectively, of AgCF 3 to [(dme)NiBr 2 ] in the presence of the [PPh 4 ] + counterion. Detailed insights into the electronic properties of these new compounds were obtained through the use of density functional theory (DFT) calculations, spectroscopy-oriented configuration interaction (SORCI) calculations, X-ray absorption spectroscopy, and cyclic voltammetry. The data collectively show that trifluoromethyl complexes of nickel, even in the most common oxidation state of nickel(II), are highly covalent systems whereby a hole is distributed on the trifluoromethyl ligands, surprisingly rendering the metal to a physically more reduced state. In the cases of [(MeCN)Ni(CF 3 ) 3 ] - and [Ni(CF 3 ) 4 ] 2- , these complexes are better physically described as d 9 metal complexes. [(MeCN)Ni(CF 3 ) 3 ] - is electrophilic and reacts with other nucleophiles such as phenoxide to yield the unsupported [(PhO)Ni(CF 3 ) 3 ] 2- salt, revealing the broader potential of [(MeCN)Ni(CF 3 ) 3 ] - in the development of "ligandless" trifluoromethylations at nickel. Proof-in-principle experiments show that the reaction of [(MeCN)Ni(CF 3 ) 3 ] - with an aryl iodonium salt yields trifluoromethylated arene, presumably via a high-valent, unsupported, and formal organonickel(IV) intermediate. Evidence of the feasibility of such intermediates is provided with the structurally characterized [PPh 4 ] 2 [Ni(CF 3 ) 4 (SO 4 )], which was derived through the two-electron oxidation of [Ni(CF 3 ) 4 ] 2- .

A convenient and efficient method for the construction of aryl trifluoromethyl selenoethers from the corresponding aryl halides in the presence of Ni(COD) 2 and an appropriate ligand is reported. Various aryl iodides, bromides, and chlorides were smoothly converted in this reaction by simply varying the ligand, which afforded aryl and heteroaryl trifluoromethyl selenoethers in good to almost quantitative yields. The reaction was also applicable to the synthesis of druglike molecules. This work is the first report for trifluoromethylselenolation of aryl chlorides. Advantages of the present Ni-catalyzed approach include mild reaction conditions, good functional group tolerance, inexpensive reagents, easy operation, and no use of additional additives. This protocol allows for a straightforward and reliable access to trifluoromethyl selenides that are latent screening candidates for new pharmaceuticals and agrochemicals.

The new organonickel complexes [(R-PyMA)Ni(Mes)X] [R-PyMA = N-aryl-1-(pyridin-2-yl)methanimine; aryl = phenyl, 2,6-Me 2 -, 3,5-Me 2 -, 2,4,6-Me 3 -, 2,6- i Pr 2 -, 3,5-(OMe) 2 -, 2-NO 2 -4-Me-, 4-NO 2 -, 2-CF 3 -, and 2-CF 3 -6-F-phenyl; Mes = 2,4,6-trimethylphenyl; X = F, Cl, Br, or I] were obtained as approximate 1/1 cis and trans isomeric mixtures or pure cis isomers depending on the PyMA ligand and X. The [(R-PyMA)Ni(Mes)X] complexes with X = Br or Cl were directly synthesized from the precursors trans-[(PPh 3 ) 2 Ni(Mes)X], while [(PyMA)Ni(Mes)X] derivatives with X = F or I were obtained from [(PyMA)Ni(Mes)Br] through X exchange reactions. Although density functional theory (DFT) calculations show a preference for the sterically favored cis isomers, both isomers could be observed in many cases; in three cases, even single crystals for X-ray diffraction could be obtained for the trans isomers. Possible intermediates for the isomerization were investigated by DFT calculations. All complexes were studied by multiple spectroscopic means, electrochemistry, and spectroelectrochemistry (for the reduction processes). The long-wavelength metal-to-ligand charge-transfer (MLCT) absorptions vary markedly with the R substituent of the ligand and the cathodic electrochemical potentials to a far smaller degree. Both are almost invariable upon variation of X. All of this is in line with Ni-based and π*-based lowest unoccupied molecular orbitals (LUMOs). In line with the unsymmetric character of the N Py ^N methanimine ligand, electrochemistry and MLCT transitions seem to not correspond to the same type of π* LUMO, making these PyMA ligands more interesting than the symmetric heteroaromatic polypyridine ligands such as 2,2'-bipyridine (bpy; N Py ^N Py ) and N,N-diaryl-substituted aliphatic α-diimines (N methanimine ^N methanimine ) such as the diaza-1,3-butadienes (DAB). First attempts to use these complexes in Negishi-type cross-coupling reactions were successful.

A stable and isolable difluoromethyl zinc reagent has been prepared through the reaction of ICF2H with diethyl zinc and DMPU. This new zinc reagent is a free-flowing solid and can be used in combination with a nickel catalyst to difluoromethylate aryl iodides, bromides, and triflates at room temperature. Such mild conditions for the catalytic difluoromethylation of these substrates are unprecedented.

New difunctionalized and fluoroalkylated silyl reagents have been prepared that react with silver and copper salts to afford active catalysts that can be used to synthesize arylated fluoroalkyl bromide building blocks. It has been shown that the [(phen)Ag(CF2)nBr] intermediates are capable of transferring both the phenanthroline ligand and the fluoroalkyl bromide chain to copper iodide, eliminating the need for a preligated copper salt precursor. The methodology is compatible with various chain lengths of the fluoroalkyl halide functionality.

A mild and practical protocol for manganese-catalyzed aerobic oxytrifluoromethylation of olefinic bonds of styrene derivatives using CF3SO2Na (Langlois' reagent) as the CF3 source is described. A distinguishing feature of this method is the generation of trifluoromethyl radicals from CF3SO2Na using the simple manganese salt/O2 system. The reaction proceeds under ambient conditions, free of added peroxide initiators, and provides moderate to good selectivities for alcohol versus ketone product.

Mechanistic proposals for nickel-catalyzed coupling reactions often invoke five-coordinate alkyl- or aryl-bound Ni(II) and/or high-valent nickel(III) species, but because of their reactive nature, they have been difficult to study and fingerprint. In this work, we invoked the stabilizing properties of fluoroalkyl ligands to access such nickel species bearing ligands that are commonplace in organic coupling reactions. We show that five-coordinate Ni(II) complexes containing nickel-carbon bonds can readily be prepared given the appropriate precursor, and we also present evidence for the formation of Ni(III) species upon chemical and electrochemical oxidation of the five-coordinate complexes.

Inexpensive nickel-bipyridine complexes were found to be active for the trifluoromethylthiolation of aryl iodides and aryl bromides at room temperature using the convenient [NMe(4)][SCF(3)] reagent., (© 2011 American Chemical Society)

A synthesis has been developed that allows the isolation of four-coordinate [(tpy)Ni-Br] (1, tpy = terpyridine) in high yield. Complex 1 has been structurally characterized, and the X-ray data reveal a square-planar geometry, unlike the known [(tpy')Ni-I] (tpy' = 4,4',4''-tri-tert-butyl-terpyridine) but similar to [(tpy)Ni-CH(3)]. In the solid-state, EPR spectroscopy indicates, however, that unlike [(tpy)Ni-CH(3)], the electronic structure of 1 is a metal-centered, not a ligand-centered radical. Density functional theory (DFT) analyses support this assignment. The preparation of 1 also facilitated the analysis of the redox potentials of a series of terpyridine nickel derivatives. It was found that the overall ligand sphere (one vs two coordinated terpyridine ligands) plays more of a role in determining the redox potentials of these derivatives than do the formal oxidation states of the nickel ions in the solution phase.

An organocatalytic asymmetric Nazarov cyclization of diketoesters that proceeds by means of a dual activation mechanism has been developed. Screening of a number of catalysts led to a new thiourea that incorporates a primary amino group. The method gives rise to cyclic products with two adjacent quaternary asymmetric carbon atoms, one of which is an all-carbon stereocenter, with complete or nearly complete diastereoselectivity and in high or very high enantiomeric excess. A brief and very convenient synthesis of the acyclic diketoester starting materials through nucleophilic addition to a ketene is also described.

The M-H-M bonding in the dinuclear complexes Ni(2)(mu-H)(mu-P(2))(2)X(2) (P(2) = R(2)PCH(2)PR(2), R = iPr, Cy; X = Cl, Br) has been investigated. These dinickel A-frames were studied via density functional theory (DFT) calculations to analyze the factors that influence linear and bent M-H-M bonding. The DFT calculations indicate that the bent geometry is favored electronically, with ligand steric effects driving the formation of the linear M-H-M structures.

The mono-triflate salts of some chiral nonracemic 1,2-diamines react with alpha-ketoenones in a stoichiometric reaction to form products of the Nazarov cyclization in high enantiomeric ratios. The mechanism appears to involve rearrangement of an enamine-iminium ion.

The first examples of isolable and structurally characterized Cu(I)-CF3 complexes are reported. N-Heterocyclic carbene (NHC)-supported copper tert-butoxide complexes reacted with Me3Si-CF3 to afford new (NHC)Cu-CF3 complexes whose structures were dependent on whether or not the C4-C5 positions of the five-membered NHC rings were saturated. In situ generated (SIiPr)Cu-CF3 cleanly transferred its trifluoromethyl group to a number of organic halides under mild conditions.

The effect of chelating phosphines was tested on the structure and pH-dependent stability of nickel-cysteine binding. (1,2-Bis(diphenylphosphino)ethane (dppe) and 1,1,1-tris[(diphenylphosphino)methyl]ethane (triphos) were used with three different cysteine derivatives (L-cysteine, Cys; L-cysteine ethyl ester, CysEt; cystamine, CysAm) to prepare complexes of the form (dppe)NiCysR(n+) and (triphos)NiCysR(n+) (n = 0 for Cys; n = 1 for CysEt and CysAm). Similar 31P {1H} NMR spectra for all (dppe)NiCysRn+ confirmed their square-planar P2NiSN coordination spheres. The structure of [(dppe)NiCysAm]PF6 was also confirmed by single-crystal X-ray diffraction methods. The (triphos)NiCysAm+ and (triphos)NiCysEt+ complexes were fluxional at room temperature by 31P NMR. Upon cooling to -80 degrees C, all gave spectra consistent with a P2NiSN coordination sphere with the third phosphorus uncoordinated. Temperature-dependent 31P NMR spectra showed that a trans P-Ni-S pi interaction controlled the scrambling of the coordinated triphos. In aqueous media, (dppe)NiCys was protonated at pH approximately 4-5, leading to possible formation of a nickel-cysteinethiol and eventual cysteine loss at pH < 3. The importance of N-terminus cysteine in such complexes was demonstrated by preparing (dppe)NiCys-bead and trigonal-bipyramidal Tp*NiCys-bead complexes, where Cys-bead represents cysteine anchored to polystyrene synthesis beads and Tp*- = hydrotris(3,5-dimethylpyrazolyl)borate. Importantly, results with these heterogeneous systems demonstrated the selectivity of these nickel centers for cysteine over methionine and serine and most specifically for N-terminus cysteine. The role of Ni-S pi bonding in nickel-cysteine geometries will be discussed, including how these results suggest a mechanism for the movement of electron density from nickel onto the backbone of coordinated cysteine.

Structural data for four closely related dinuclear nickel hydride complexes have been compared in order to gain insight into the factors governing the Ni-H-Ni geometries. The derivatives [(dippm)2Ni2X2](mu-H) [dippm = 1,2-bis(diisopropylphosphino)methane] were found to contain a linear Ni-H-Ni bridge, whereas the derivatives [(dcpm)2Ni2X2](mu-H) [dcpm = 1,2-bis(dicyclohexylphosphino)methane] were found to contain a bent Ni-H-Ni bridge. The number of internal and interatomic CH-to-halide contacts of the former were much shorter and more numerous than the latter, suggesting an important role of external forces in bridging hydride geometries.

A series of complexes of formula TpNiX, where Tp*- = hydrotris(3,5-dimethylpyrazole)borate and X = Cl, Br, I, has been characterized by electronic absorption spectroscopy in the visible and near-infrared (NIR) region and by high-frequency and -field electron paramagnetic resonance (HFEPR) spectroscopy. The crystal structure of TpNiCl has been previously reported; that for TpNiBr is given here: space group = Pmc2(1), a = 13.209(2) A, b = 8.082(2) A, c = 17.639(4) A, alpha = beta = gamma = 90 degrees , Z = 4. TpNiX contains a four-coordinate nickel(II) ion (3d8) with approximate C3v point group symmetry about the metal and a resulting S = 1 high-spin ground state. As a consequence of sizable zero-field splitting (zfs), TpNiX complexes are "EPR silent" with use of conventional EPR; however, HFEPR allows observation of multiple transitions. Analysis of the resonance field versus the frequency dependence of these transitions allows extraction of the full set of spin Hamiltonian parameters. The axial zfs parameter for TpNiX displays pronounced halogen contributions down the series: D = +3.93(2), -11.43(3), -22.81(1) cm(-1), for X = Cl, Br, I, respectively. The magnitude and change in sign of D observed for TpNiX reflects the increasing bromine and iodine spin-orbit contributions facilitated by strong covalent interactions with nickel(II). These spin Hamiltonian parameters are combined with estimates of 3d energy levels based on the visible-NIR spectra to yield ligand-field parameters for these complexes following the angular overlap model (AOM). This description of electronic structure and bonding in a pseudotetrahedral nickel(II) complex can enhance the understanding of similar sites in metalloproteins, both native nickel enzymes and nickel-substituted zinc enzymes.

The ability of the terpyridine ligand to stabilize alkyl complexes of nickel has been central in obtaining a fundamental understanding of the key processes involved in alkyl-alkyl cross-coupling reactions. Here, mechanistic studies using isotopically labeled (TMEDA)NiMe(2) (TMEDA = N,N,N',N'-tetramethylethylenediamine) have shown that an important catalyst in alkyl-alkyl cross-coupling reactions, (tpy')NiMe (2b, tpy' = 4,4',4' '-tri-tert-butylterpyridine), is not produced via a mechanism that involves the formation of methyl radicals. Instead, it is proposed that (terpyridine)NiMe complexes arise via a comproportionation reaction between a Ni(II)-dimethyl species and a Ni(0) fragment in solution upon addition of a terpyridine ligand to (TMEDA)NiMe(2). EPR and DFT studies on the paramagnetic (terpyridine)NiMe (2a) both suggest that the unpaired electron resides heavily on the terpyridine ligand and that the proper electronic description of this nickel complex is a Ni(II)-methyl cation bound to a reduced terpyridine ligand. Thus, an important consequence of these results is that alkyl halide reduction by (terpyridine)NiR(alkyl) complexes appears to be substantially ligand based. A comprehensive survey investigating the catalytic reactivity of related ligand derivatives suggests that electronic factors only moderately influence reactivity in the terpyridine-based catalysis and that the most dramatic effects arise from steric and solubility factors.

[reaction: see text] The synthesis of an advanced intermediate in the synthesis of the title compound has been achieved. Key steps include an Ireland-Claisen rearrangement to install the C7 tertiary alcohol stereocenter, an SN2' reaction of an alkoxymethyl Cu reagent, and a diastereoselective Re-catalyzed allylic alcohol transposition.

Several photoactive platinum alpha-diimine intercalators have been prepared to develop new probes of DNA oxidation and reduction chemistry. Five water-soluble bis(mes')Pt(II) complexes (mes' = N,N,N,3,5-pentamethylaniline) with various aromatic alpha-diimine ligands (dppz = dipyridophenazine, np = naphtha[2,3-f][1,omega]phenanthroline, CN-np = naphtho[2,3-f][1,10]phenanthroline-9-carbonitrile, CN(2)-np = naphtho[2,3-f][1,10]phenanthroline-9,14-dicarbonitrile, and bp = benzo-[f][1,10]phenanthroline) were synthesized. The complex [(np)Pt(mes')(2)]Cl(2) was also characterized by X-ray crystallography, and the crystal structure shows that the ortho-methyl groups of the mes' ligands conveniently block substitution at the vacant sites of platinum without overlapping with the intercalating alpha-diimine ligand. The Pt(II) complexes were found to have excited-state oxidation and reduction potentials of -0.6 to -1.0 and 1.0 to 1.5 V versus NHE, respectively, making them potent photoreductants as well as photooxidants. Many of the complexes are found to promote the photooxidation of N(2)-cyclopropyldeoxyguanosine (d(Cp)G). Photoexcited [(dppz)Pt(mes')(2)](2+) is found to be most efficient in this photooxidation, as well as in the photoreduction of N(4)-cyclopropylcytidine ((Cp)C); these modified nucleosides rapidly decompose in a ring-opening reaction upon oxidation or reduction. Photoexcited [(dppz)Pt(mes')(2)]Cl(2), upon intercalation into the DNA pi stack, is found, in addition, to promote reductive and oxidative damage within the DNA duplex, as is also probed using the kinetically fast electron and hole traps, (Cp)C and (Cp)G. These Pt complexes may therefore offer useful reactive tools to compare and contrast directly reductive and oxidative chemistry in double helical DNA.

Enantiopure 2-(tributylstannyl)pyrrolidine hydroiodide may be prepared in excellent yield by TMSI treatment of the corresponding N-Boc compound, which is in turn prepared by asymmetric deprotonation (s-BuLi.sparteine) and stannylation, as described in the literature. Crystals of the hydroiodide salt suitable for X-ray analysis were obtained, and although there is some disorder about the butyl groups, analysis using anomalous dispersion establishes the absolute configuration as S.

Reaction of two equiv of 1-adamantylzinc bromide with (dippm)NiBr2 (dippm = bis(di-isopropylphosphino)methane) led to a dinuclear metal complex containing a unique linear bridging hydride ligand. The hydride was characterized by neutron diffraction methods, which confirmed a linear bonding mode. Preliminary reactivity studies of this unusual dimer are reported.

Addition of terpyridine to (TMEDA)Ni(CH3)2 results in the high-yield formation of (terpyridyl)NiMe (3). This NiI organometallic complex was found to be capable of transferring its methyl group to iodocyclohexane to produce methylcyclohexane in high yield. Compound 3 can also serve as an initiator for the catalytic cross-coupling of alkyl electrophiles performed under Negishi-like conditions.

[reaction: see text] A novel cycloaldol approach to the isobenzofuran core common to many of the eunicellin diterpenes is described. The cycloaldol precursor was prepared by aldol addition of (S)-(+)-carvone and methacrolein followed by etherification to a glycolate ester. Chemoselective enolization of the glycolate ester led to the cycloaldol adduct in high yield and diastereoselectivity. An oxidative rearrangement-allylic diazene rearrangement sequence established the requisite cis ring fusion.