Search

Herein, the integration of SnO 2 nanoparticles with two Zn(II) porphyrins─Zn(II) 5,10,15,20-tetraphenylporphyrin (ZnTPP) and its perfluorinated counterpart, Zn(II) 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin (ZnTPPF 20 )─was investigated for the sensing of gaseous acetone at 120 °C, adopting three Zn-porphyrin/SnO 2 weight ratios (1:4, 1:32, and 1:64). For the first time, we were able to provide evidence of the correlation between the materials' conductivity and these nanocomposites' sensing performances, obtaining optimal results with a 1:32 ratio for ZnTPPF 20 /SnO 2 and showcasing a remarkable detection limit of 200 ppb together with a boosted sensing signal with respect to bare SnO 2 . To delve deeper, the combination of experimental data with density functional theory calculations unveiled an electron-donating behavior of both porphyrins when interacting with tin dioxide semiconductor, especially for the nonfluorinated one. The study suggested that the interplay between electrons injected, from the porphyrins' highest occupied molecular orbital to SnO 2 conduction band, and the latter's available electronic states has a dramatic impact to boost the chemiresistive sensing. Indeed, we highlighted that the key lies in preventing the full saturation of SnO 2 electronic states concomitantly increasing the materials' conductivity: in this respect, the best compromise turned out to be the perfluorinated porphyrin. A further corroboration of our findings was obtained by illuminating the sensors during measurements with light-emitting diode (LED) light. Actually, we demonstrated that it does not have any impact on improving the sensing behavior, most probably due to the electronic oversaturation and scattering caused by LED excitation in porphyrins. Lastly, the most effective hybrids (1:32 ratio) were physicochemically characterized, confirming the physisorption of the macrocycles onto the SnO 2 surface. In conclusion, herein, we underscore the feasibility of customizing the porphyrin chemistry and porphyrin-to-SnO 2 ratio to enhance the gaseous sensing of bare metal oxides, providing valuable insights for the engineering of highly performing light-free chemiresistors.

This research introduces a novel series of perfluorinated Zn(II) porphyrins with positive oxidation potentials designed as sensitizers for photoelectrosynthetic cells, with a focus on promoting the oxidation of benzyl alcohol (BzOH) mediated by the 2,2,6,6-tetramethyl-1-piperidine N -oxyl (TEMPO) organocatalyst. Three dyes, CLICK-3 , CLICK-4 , and BETA-4 , are meticulously designed to explore the impact of substituents and their positions on the perfluorinated porphyrin ring in terms of redox potentials and energy level alignment when coupled with SnO 2 /TiO 2 -based photoanodes and TEMPO mediator. A comprehensive analysis utilizing spectroscopy, electrochemistry, photophysics, and computational techniques of the dyes in solution and sensitized thin films unveils an enhanced charge-separation character in the 4D-π-1A type BETA-4 . Incorporating four dimethylamino donor groups at the periphery of the porphyrin ring and a BTD-accepting linker at the β-pyrrolic position equips the structure with a more efficient donor-acceptor system. This enhancement ensures improved light-harvesting capacity, resulting in a doubled incident photon-to-current conversion efficiency (IPCE% ≃30%) in the presence of LiI compared to meso -substituted dyes CLICK-3 and CLICK-4 . Sensitizing SnO 2 /TiO 2 thin films with BETA-4 successfully promotes the photooxidation of benzyl alcohol (BzOH) in the presence of the rapid TEMPO radical catalyst, yielding photocurrents of approximately 125 μA/cm 2 in an optimized TBPy/LiClO 4 /ACN electrolyte. Notably, when lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) replaces TBPy as the base for TEMPO-catalyzed BzOH oxidation, a remarkable photocurrent of around 800 μA/cm 2 is achieved, marking one of the highest values reported for this photoelectrochemical reaction to date. This study underscores that the proper functionalization of perfluorinated zinc porphyrins positions these dyes as ideal candidates for sensitizing SnO 2 /TiO 2 in the photodriven oxidation of BzOH. It also highlights the crucial role of carefully tuning electrolyte composition based on the electronic properties of molecular sensitizers.

In this work, we have prepared a series of A 4 Zn II porphyrins, carrying in the β-pyrrolic-position one or two π-delocalized ethynylphenyl moieties with a -NO 2 acceptor or a -NMe 2 donor pendant, and measured their second-order NLO response in CHCl 3 solution at 1907 nm via the electric-field-induced second harmonic generation (EFISH) technique. For some of these compounds, we have recorded an unexpected sign and/or absolute value of μβ 1907 . Since their sterically hindered A 4 structure should ensure the lack of significant aggregation processes in solution, we explain such anomalous EFISH results by invoking a non-negligible contribution of the electronic cubic term γ(-2ω; ω, ω, 0) to γ EFISH , as supported by a qualitative evaluation of the third-order response through the measure of the cubic hyperpolarizability (γ THG ) and by computational evidence.

We investigated the impact of singly occupied molecular orbital (SOMO) energy on the n-doping efficiency of benzimidazole derivatives. By designing and synthesizing a series of new air-stable benzimidazole-based dopants with different SOMO energy levels, we demonstrated that an increase of the dopant SOMO energy by only ∼0.3 eV enhances the electrical conductivity of a benchmark electron-transporting naphthalenediimide-bithiophene polymer by more than 1 order of magnitude. By combining electrical, X-ray diffraction, and electron paramagnetic resonance measurements with density functional theory calculations and analytical transport simulations, we quantitatively characterized the conductivity, Seebeck coefficient, spin density, and crystallinity of the doped polymer as a function of the dopant SOMO energy. Our findings strongly indicate that charge and energy transport are dominated by the (relative) position of the SOMO level, whereas morphological differences appear to play a lesser role. These results set molecular-design guidelines for next-generation n-type dopants.

Three perfluorinated Zn II porphyrins were evaluated as n-type sensitizers in photoelectrosynthetic cells for HBr and water splitting. All the dyes are featured by the presence of pentafluorophenyl electron-withdrawing groups to increase the ground-state oxidation potential and differ for the nature and position of the π-conjugate linker between the core and anchoring group tasked to bind the metal oxide, in order to assess the best way of coupling with the semiconductor. A phenyl-triazole moiety was used to link the carboxylic anchoring group onto the meso position, while an ethynyl-phenyl linker was chosen to bridge carboxylic and cyanoacrylic groups onto the β-pyrrolic position. A combination of electrochemical, computational, and spectroscopic investigations confirmed the strong electron-withdrawing effect of the perfluorinated porphyrin core, which assures all the investigated dyes of the high oxidation potential required to the coupling with water oxidation catalysts (WOC). Such an electron-poor core, however, affects the charge separation character of the dyes, as demonstrated by the spatial distribution of the excited states, leading to a nonquantitative charge injection, although tilting of the molecules on the semiconductor surface could bring the porphyrin ring closer to the semiconductor, offering additional charge-transfer pathways. Indeed, all the dyes demonstrated successful in the splitting of both aqueous HBr and water, with the best results found for the SnO 2 /TiO 2 photoanode sensitized with the β-substituted porphyrin equipped with a cyanoacrylic terminal group, achieving 0.4 and 0.1 mA/cm 2 photoanodic currents in HBr and water under visible light, respectively. The faradaic yield for oxygen evolution in the presence of an Ir IV catalyst was over 95%, and the photoanode operation was stable for more than 1000 s. Thus, the perfluorinated porphyrins with a cyanoacrylic anchoring group at the β-position should be considered for further development to improve the charge-transfer character.

The combination of β-substituted Zn 2+ porphyrin dyes and copper-based electrolytes represents a sustainable route for economic and environmentally friendly dye-sensitized solar cells. Remarkably, a new copper electrolyte, [Cu(2-mesityl-1,10-phenanthroline) 2 ] +/2+ , exceeds the performance reached by Co 2+/3+ and I - /I 3 - reference electrolytes.

A series of 5,15 push-pull meso-diarylzinc(II) porphyrinates, carrying one or two -COOH or -COOCH 3 acceptor groups and a -OCH 3 or a -N(CH 3 ) 2 donor group, show in N,N-dimethylformamide and CHCl 3 solutions a negative and solvent-dependent second-order nonlinear-optical (NLO) response measured by the electric-field-induced second-harmonic generation (EFISH) technique, different from the structurally related zinc(II) porphyrinate carrying a -N(CH 3 ) 2 donor group and a -NO 2 acceptor group, where a still solvent-dependent but positive EFISH second-order response was previously reported. Moreover, when a -N(CH 3 ) 2 donor group and a -COOH acceptor group are part of a sterically hindered 2,12 push-pull β-pyrrolic-substituted tetraarylzinc(II) porphyrinate, the EFISH response is positive and solvent-independent. In order to rationalize these rather intriguing series of observations, EFISH measurements have been integrated by electronic absorption and IR spectroscopic investigations and by density functional theory (DFT) and coupled-perturbed DFT theoretical and 1 H pulsed-gradient spin-echo NMR investigations, which prompt that the significant concentration effects and the strong influence of the solvent nature on the NLO response are originated by a complex whole of different aggregation processes induced by the -COOH group.

The antipodal introduction of two bromine atoms on the 2,12 β-pyrrolic position of 5,10,15,20-tetra(3,5-di-tert-butylphenyl)porphyrin was successfully achieved by a light-induced reaction of the substrate with excess NBS. Complexation with Ni(II) of the major regioisomer led to good quality crystals, suitable for X-ray structure determination with unprecedented probability levels. The regiospecific character of the synthetic procedure and the exactness of the bromine atom position assignment were thus confirmed, suggesting an unexpected electrophilic aromatic substitution pathway rather than a free-radical halogenation process. A QTAIM topological analysis on the DFT-optimized wave function of the monosubstituted free-base porphyrin intermediate carrying a bromine atom in C2 β-pyrrolic position confirmed the largest negative charge for the C12 carbon atom in antipodal position, in agreement with the proposed electrophilic aromatic substitution mechanism.

Time-resolved photophysical and photoelectrochemical investigations have been carried out to compare the electron transfer dynamics of a 2-β-substituted tetraarylporphyrinic dye (ZnB) and a 5,15-meso-disubstituted diarylporphyrinic one (ZnM) at the electrolyte/dye/TiO2 interface in PSSCs. Although the meso push-pull structural arrangement has shown, up to now, to have the best performing architecture for solar cell applications, we have obtained superior energy conversion efficiencies for ZnB (6.1%) rather than for ZnM (3.9%), by using the I(-)/I3(-)-based electrolyte. To gain deeper insights about these unexpected results, we have investigated whether the intrinsic structural features of the two different porphyrinic dyes can play a key role on electron transfer processes occurring at the dye-sensitized TiO2 interface. We have found that charge injection yields into TiO2 are quite similar for both dyes and that the regeneration efficiencies by I(-), are also comparable and in the range of 75-85%. Moreover, besides injection quantum yields above 80%, identical dye loading, for both ZnB and ZnM, has been evidenced by spectrophotometric measurements on transparent thin TiO2 layers after the same adsorption period. Conversely, major differences have emerged by DC and AC (electrochemical impedance spectroscopy) photoelectrochemical investigations, pointing out a slower charge recombination rate when ZnB is adsorbed on TiO2. This may result from its more sterically hindered macrocyclic core which, besides guaranteeing a decrease of π-staking aggregation of the dye, promotes a superior shielding of the TiO2 surface against charge recombination involving oxidized species of the electrolyte.

We report the synthesis, characterization, nonlinear-optical (NLO) properties, and density functional theory (DFT) calculations for three nickel diiminedithiolate complexes [Ni(4,4'-R2carboxy-bpy)(L)] [R = methyl, L = 1,2-benzenedithiolate (bdt), 1; R = ethyl, L = 5,6-dihydro-1,4-dithine-2,3-dithiolate (dddt), 2; R = ethyl, L = 1-(N-methylindol-5-yl)ethene-1,2-dithiolate (mi-5edt), 3]. The crystal structure of 1 shows a square-planar coordination for the nickel ion and bond distances consistent with a diiminedithiolate description for the complex. For all complexes, the cyclic voltammetry measurements show two reversible reduction processes (-1.353/-1.380 V and -0798/-0.830 V, respectively) and an anodic wave (+0.372/+0.601 V). The UV-vis spectra present a band around 600-700 nm (ε = 4880-6000 dm(3) mol(-1) cm(-1)) mainly attributed to a charge-transfer highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) transition, which shows a large negative solvatochromic shift, characteristic of push-pull complexes, and is responsible for the NLO properties of these molecules. The charge-transfer character of this electronic transition is confirmed by DFT calculations, with the HOMO mainly centered on the dithiolate moiety and the LUMO on the bpy ligand, with important contribution given by the carboxyl groups (≈13%). Small contributions from the nickel(II) ion are present in both of the frontier orbitals. The carboxyl groups enhance the optical properties of this class of complexes, confirmed by comparison with the corresponding unsubstituted compounds. The second-order NLO properties have been measured by an electric-field-induced second-harmonic-generation technique using a 10(-3) M solution in N,N-dimethylformamide and working with a 1.907 μm incident wavelength, giving for μβ1.907 (μβ0) values of -1095 (-581), -2760 (-954), and -1650 (-618) × 10(-48) esu for 1-3, respectively. These values are among the highest in the class of square-planar push-pull complexes, similar to those found for dithionedithiolate compounds. Moreover, spectroelectrochemical experiments demonstrate the possibility of using these complexes as redox-switchable NLO chromophores.

The second-order nonlinear optical (NLO) properties of [Ln(hfac)(3)(diglyme)] (hfac = hexafluoroacetylacetonate; diglyme = bis(2-methoxyethyl)ether; Ln = La, Ce, Pr, Sm, Eu, Gd, Er, Lu) complexes have been investigated by a combination of electric-field second harmonic generation (EFISH) and harmonic light scattering (HLS) techniques, providing evidence for the relevant role of f electrons in tuning the second-order NLO response dominated by the octupolar contribution. These lanthanide NLO chromophores allow a clean valuation of the influence of f electrons on the quadratic hyperpolarizability and on its dipolar and octupolar contributions. Molecular quadratic hyperpolarizability values measured by the EFISH method, beta(EFISH), initially increase rapidly with the number of f electrons, the value for the Gd complex being 11 times that of the La complex, whereas this increase is much lower for the last seven f electrons, the beta(EFISH) value of the Lu complex being only 1.2 times that of the Gd complex. The increase of beta(HLS), which is dominated by an octupolar contribution, is much lower along the Ln series. Remarkably, the good beta(HLS) values of these simple systems, well known for their luminescence properties, are reached at no cost of transparency.

New unsymmetrical [N2O2] tetradentate Schiff base complexes of Ni(II), Cu(II), Zn(II), and VO(II) were synthesized by template condensation of the tetradentate precursor 1-phenylbutane-1,3-dione mono-S-methylisothiosemicarbazone with o-hydroxybenzaldehyde or its 5-phenylazo derivative. They were characterized by elemental analysis, IR, UV-vis, electron spin resonance, and NMR spectroscopy, mass spectrometry, and magnetic measurements. The crystal structures of five of them have been determined by X-ray diffraction using, in some cases, synchrotron radiation. These compounds are characterized by a large thermal stability; their decomposition temperatures range from 240 up to 310 degrees C. Complexes with the phenylazo substituent were found to possess a large second-order nonlinear optical (NLO) response, as determined both by measurements of solution-phase direct current electric-field-induced second harmonic generation and by theoretical time-dependent density functional theory (TDDFT) calculations. The molecular hyperpolarizability was found to decrease in the order Zn(II) > Cu(II) > Ni(II) approximately VO(II). The active role of the metal in determining the NLO properties of the complexes was shown through an analysis of their UV-vis spectra, which revealed the presence of metal-to-ligand (in closed-shell complexes) and ligand-to-metal (in open-shell complexes) charge-transfer bands together with intra-ligand charge-transfer transitions. Assignment of the bands was based on the analysis of the TDDFT computed spectra.

Coordination of 4'-(C6H4-p-X)-2,2':6',2''-terpyridines [X = NO2, NBu2, (E)-CH=CH-C6H4-p-NBu2, (E,E)-(CH=CH)2-C6H4-p-NMe2] to Zn(II), Ru(III), and Ir(III) metal centers induces a significant enhancement of the absolute value of the second-order nonlinear optical (NLO) response of the terpyridine, measured by means of both electric field induced second harmonic generation and solvatochromic methods. By varying the nature of the metal center, the enhanced second-order NLO response shifts from positive to negative. Such a shift is controlled by electronic charge-transfer transitions, such as metal-to-ligand or ligand-to-metal transitions, in addition to the intraligand charge transfer. The enhancement generated by coordination is also controlled by the chelation effect and by fine-tuning of the ancillary ligands.

To evidentiate the role of the nature of sulfonate ancillary ligands on the value of the quadratic hyperpolarizability of Zn(II) complexes with stilbazole-like ligands, the second-order nonlinear optical (NLO) properties of [ZnY(2)(4,4'-trans-NC5H4CH=CHC6H4NMe2)2] complexes (Y = CF3SO3, CH3SO3, or p-CH3C6H4SO3) are investigated. By working at relatively high concentrations (>3 x 10(-4) M), the positive effect of the triflate ligand remains unique while, with nonfluorinated sulfonate ligands, the second-order NLO response is comparable to that of the related complexes with acetate or trifluoroacetate as ancillary ligands. However, at dilutions higher than 10(-4) M, all of the sulfonate complexes reach huge quadratic hyperpolarizabilities because of solvolysis with the formation of cationic species such as [ZnY(4,4'-trans-NC5H4CH=CHC6H4NMe2)2]+, characterized by a large second-order NLO response. This view is supported by careful conductivity measurements. The same behavior occurs if 4,4'-trans-NC5H4CH=CHC6H4NMe2 is substituted by 4,4'-trans,trans-NC5H4(CH=CH)2C6H4NMe2.