Search

Electrochemical and analytical techniques were utilized to study Ca electrodeposition in nonaqueous electrolytes. Linear sweep voltammograms obtained at Au and Pt ultramicroelectrodes (UMEs) exhibit an inverse dependence between current density and scan rate, indicative of the presence of a chemical reaction step in a chemical-electrochemical (CE) deposition process. However, the magnitude of change in current density as a function of scan rate is larger at the Au UME than at the Pt UME. COMSOL simulation reveals that the chemical reaction step rate ( k c ) obtained at the Pt UME is ∼10 times faster than that at the Au UME. Field desorption ionization mass spectrometry (MS) suggests that dehydrogenation of the borohydride anions by the metal substrate is the chemical reaction step. Pt is more efficient at abstracting hydride from borohydride ions than Au, leading to larger k c . Raman spectroscopy and electrospray ionization MS data show that Ca 2+ ions are strongly coordinated with tetrahydrofuran and weakly interacting with BH 4 - anions. Electron microscopy shows that the surface morphology of Ca electrodeposition is different between Au and Pt, with Au exhibiting a smooth deposit, while a patchier deposit is seen on Pt.

(BiSe) 1+δ (NbSe 2 ) n heterostructures with n = 1-4 were synthesized using modulated elemental reactants. The BiSe bilayer structure changed from a rectangular basal plane with n = 1 to a square basal plane for n = 2-4. The BiSe in-plane structure was also influenced by small changes in the structure of the precursor, without significantly changing the out-of-plane diffraction pattern or value of the misfit parameter, δ. Density functional theory calculations on isolated BiSe bilayers showed that its lattice is very flexible, which may explain its readiness to adjust shape and size depending on the environment. Correlated with the changes in the BiSe basal plane structure, analysis of scanning transmission electron microscope images revealed that the occurrence of antiphase boundaries, found throughout the n = 1 compound, is dramatically reduced for the n = 2-4 compounds. X-ray photoelectron spectroscopy measurements showed that the Bi 5d 3/2 , 5d 5/2 doublet peaks narrowed toward higher binding energies as n increased from 1 to 2, also consistent with a reduction in the number of antiphase boundaries. Temperature-dependent electrical resistivity and Hall coefficient measurements of nominally stoichiometric samples in conjunction with structural refinements and XPS data suggest a constant amount of interlayer charge transfer independent of n. Constant interlayer charge transfer is surprising given the changes in the BiSe in-plane structure. The structural flexibility of the BiSe layer may be useful in designing multiple constituent heterostructures as an interlayer between structurally dissimilar constituents.

Inorganic isomers ([SnSe]1+δ)m(NbSe2)n([SnSe]1+δ)p(NbSe2)q([SnSe]1+δ)r(NbSe2)s where m, n, p, q, r, and s are integers and m + p + r = n + q + s = 4 were prepared using the modulated elemental reactant technique. This series of all six possible isomers provides an opportunity to study the influence of interface density on properties while maintaining the same unit cell size and composition. As expected, all six compounds were observed to have the same atomic compositions and an almost constant c-axis lattice parameter of ≈4.90(5) nm, with a slight trend in the c-axis lattice parameter correlated with the different number of interfaces in the isomers: two, four and six. The structures of the constituents in the ab-plane were independent of one another, confirming the nonepitaxial relationship between them. The temperature dependent electrical resistivities revealed metallic behavior for all the six compounds. Surprisingly, the electrical resistivity at room temperature decreases with increasing number of interfaces. Hall measurements suggest this results from changes in carrier concentration, which increases with increasing thickness of the thickest SnSe block in the isomer. Carrier mobility scales with the thickness of the thickest NbSe2 block due to increased interfacial scattering as the NbSe2 blocks become thinner. The observed behavior suggests that the two constituents serve different purposes with respect to electrical transport. SnSe acts as a charge donor and NbSe2 acts as the charge transport layer. This separation of function suggests that such heterostructures can be designed to optimize performance through choice of constituent, layer thickness, and layer sequence. A simplistic model, which predicts the properties of the complex isomers from a weighted sum of the properties of building blocks, was developed. A theoretical model is needed to predict the optimal compound for specific properties among the many potential compounds that can be prepared.

Intergrowth compounds of ([SnSe]1+δ)m(NbSe2)n, where 1 ≤ m = n ≤ 20, with the same atomic composition but different c-axis lattice parameters and number of interfaces per volume were synthesized using the modulated elemental reactant technique. A c-axis lattice parameter change of 1.217(6) nm as a function of one unit of m = n was observed. In-plane X-ray diffraction shows an increase in distortion of the rock salt layer as a function of m and a broadening of the NbSe2 reflections as n increases, indicating the presence of different coordination environments for Nb (trigonal prismatic and octahedral) and smaller crystallite size, which were confirmed via scanning transmission electron microscopy investigations. The electrical resistivities of all 12 compounds exhibit metallic temperature dependence and are similar in magnitude as would be expected for isocompositional compounds. Carrier concentration and mobility of the compounds vary within a narrow range of 2-6 × 10(21) cm(-3) and 2-6 cm(2) V(-1) s(-1), respectively. Even at a thickness of 12 nm for the SnSe and NbSe2 blocks, the properties of the intergrowth compounds cannot be explained as composite behavior, due to significant charge transfer between them. Upon being annealed at 500 °C, the higher order m = n compounds were found to convert to the thermodynamically stable phase, the (1,1) compound. This suggests that the capacitive energy of the interfaces stabilizes these intergrowth compounds.