Search

In this study, a novel immobilized TiO2/Ti film with exposed {001} facets was prepared via a facile one-pot hydrothermal route for the degradation of norfloxacin from aqueous media. The effects of various hydrothermal conditions (i.e., solution pH, hydrothermal time (HT) and HF concentration) on the growth of {001} faceted TiO2/Ti film were investigated. The maximum photocatalytic performance of {001} faceted TiO2/Ti film was observed when prepared at pH 2.62, HT of 3 h and at HF concentration of 0.02 M. The as-prepared {001} faceted TiO2/Ti films were fully characterized by field-emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), high resolution transmission electron microscope (HR-TEM), and X-ray photoelectron spectroscopy (XPS). More importantly, the as-prepared {001} faceted TiO2/Ti film exhibited excellent photocatalytic performance toward degradation of norfloxacin in various water matrices (Milli-Q water, tap water, river water and synthetic wastewater). The individual influence of various anions (SO42-, HCO3-, NO3-, Cl-) and cations (K+, Ca2+, Mg2+, Cu2+, Na+, Fe3+) usually present in the real water samples on the photocatalytic performance of as-prepared TiO2/Ti film with exposed {001} facet was investigated. The mechanistic studies revealed that •OH is mainly involved in the photocatalytic degradation of norfloxacin by {001} faceted TiO2/Ti film. In addition, norfloxacin degradation byproducts were investigated, on the basis of which degradation schemes were proposed. [ABSTRACT FROM AUTHOR]

In the present study, a novel TiO2/Ti film with enhanced {001} facets was synthesized by the hydrothermal technique followed by calcination for studying the removal of bezafibrate (BZF), from an aqueous environment. The synthesized photocatalyst was characterized by FE-SEM, XRD, HR-TEM, and PL-technique. The second-order rate constant of •OH with BZF was found to be 5.66 × 109 M-1 s-1. The steady state [•OH] was measured as 1.16 × 10-11 M, on the basis of oxidation of terephthalic acid. The photocatalytic degradation of BZF followed pseudo-first-order kinetics according to the Langmuir-Hinshelwood model (k1 = 2.617 mg L-1 min-1 and k2 = 0.0796 (mg L-1)−1). The effects of concentration and the nature of various additives including inorganic anions (NO3-, NO2-, HCO3-, CO32-, Cl-) and organic species (fulvic acid) and initial solution pHs (2, 4, 6, 9) on photocatalytic degradation of BZF were investigated. It was found that the nature and concentration of studied additives significantly affected the photocatalytic degradation of BZF. The efficiency of the photocatalytic degradation process in terms of electrical energy per order was estimated. Degradation schemes were proposed on the basis of the identified degradation byproducts by ultraperformance liquid chromatography. [ABSTRACT FROM AUTHOR]

In this study, a novel immobilized TiO 2 /Ti film with exposed {001} facets was prepared via a facile one-pot hydrothermal route for the degradation of norfloxacin from aqueous media. The effects of various hydrothermal conditions (i.e., solution pH, hydrothermal time (H T ) and HF concentration) on the growth of {001} faceted TiO 2 /Ti film were investigated. The maximum photocatalytic performance of {001} faceted TiO 2 /Ti film was observed when prepared at pH 2.62, H T of 3 h and at HF concentration of 0.02 M. The as-prepared {001} faceted TiO 2 /Ti films were fully characterized by field-emission scanning electron microscope (FE-SEM), X-ray diffraction (XRD), high resolution transmission electron microscope (HR-TEM), and X-ray photoelectron spectroscopy (XPS). More importantly, the as-prepared {001} faceted TiO 2 /Ti film exhibited excellent photocatalytic performance toward degradation of norfloxacin in various water matrices (Milli-Q water, tap water, river water and synthetic wastewater). The individual influence of various anions (SO 4 2- , HCO 3 - , NO 3 - , Cl - ) and cations (K + , Ca 2+ , Mg 2+ , Cu 2+ , Na + , Fe 3+ ) usually present in the real water samples on the photocatalytic performance of as-prepared TiO 2 /Ti film with exposed {001} facet was investigated. The mechanistic studies revealed that • OH is mainly involved in the photocatalytic degradation of norfloxacin by {001} faceted TiO 2 /Ti film. In addition, norfloxacin degradation byproducts were investigated, on the basis of which degradation schemes were proposed.

In the present study, a novel TiO2/Ti film with enhanced {001} facets was synthesized by the hydrothermal technique followed by calcination for studying the removal of bezafibrate (BZF), from an aqueous environment. The synthesized photocatalyst was characterized by FE-SEM, XRD, HR-TEM, and PL-technique. The second-order rate constant of (•)OH with BZF was found to be 5.66 × 10(9) M(-1) s(-1). The steady state [(•)OH] was measured as 1.16 × 10(-11) M, on the basis of oxidation of terephthalic acid. The photocatalytic degradation of BZF followed pseudo-first-order kinetics according to the Langmuir-Hinshelwood model (k1 = 2.617 mg L(-1) min(-1) and k2 = 0.0796 (mg L(-1))(-1)). The effects of concentration and the nature of various additives including inorganic anions (NO3(-), NO2(-), HCO3(-), CO3(2-), Cl(-)) and organic species (fulvic acid) and initial solution pHs (2, 4, 6, 9) on photocatalytic degradation of BZF were investigated. It was found that the nature and concentration of studied additives significantly affected the photocatalytic degradation of BZF. The efficiency of the photocatalytic degradation process in terms of electrical energy per order was estimated. Degradation schemes were proposed on the basis of the identified degradation byproducts by ultraperformance liquid chromatography.