Search

The current paradigm reads that calcifications characterize the advanced and complex lesions in the atherosclerotic process. To explore the possibility that coronary artery wall calcifications already commence at an early stage of atherosclerosis, a combination of proton beam techniques with a (sub-) micrometer resolution, i.e., micro-proton induced X-ray emission, backward and forward scattering spectroscopy, was applied on human coronary arteries with lesions preceding overt atheromas. The detection limits of phosphorus and calcium in each separate pixel, 0.88 * 0.88 [micro][m.sup.2] in size, were approximately 150 and 80 [micro]/g dry weight, respectively. Calcium distributions of entire coronary artery cross section were obtained, and calcifications were demonstrated at a preatheroma stage of the atherosclerotic process. The size of the microcalcifications varied between 1 and 10 [micro]m. The composition of the microcalcifications was deduced from the calcium-to-phosphorus ratio. In order to quantify this ratio, the thickness of the specific X-ray absorber used for PIXE had to be accurately determined. Also, thick target PIXE calculations were performed and the method was validated. The calcium-to-phosphorus ratios of the microcalcifications were assessed with good accuracy and varied from 1.62 to 2.79, which corresponds with amorphous calcium phosphate.

The problem of mechanical instability and poor barrier properties of relief stamps for microcontact printing (muCP) is addressed by developing new stamp designs. It is shown that the local oxidation of flat PDMS stamps and their subsequent modification with perfluoroalkyl groups is an effective route to solve these problems without compromising intrinsic advantages of the technique which include ease of use and the potential for a high cost efficiency.

The current paradigm reads that calcifications characterize the advanced and complex lesions in the atherosclerotic process. To explore the possibility that coronary artery wall calcifications already commence at an early stage of atherosclerosis, a combination of proton beam techniques with a (sub-) micrometer resolution, i.e., micro-proton induced X-ray emission, backward and forward scattering spectroscopy, was applied on human coronary arteries with lesions preceding overt atheromas. The detection limits of phosphorus and calcium in each separate pixel, 0.88 ∗ 0.88 μm² in size, were approximately 150 and 80 μg/g dry weight, respectively. Calcium distributions of entire coronary artery cross section were obtained, and calcifications were demonstrated at a preatheroma stage of the atherosclerotic process. The size of the microcalcifications varied between 1 and 10 pm. The composition of the microcalcifications was deduced from the calcium-to-phosphorus ratio. In order to quantify this ratio, the thickness of the specific X-ray absorber used for PIXE had to be accurately determined. Also, thick target PIXE calculations were performed and the method was validated. The calcium-to-phosphorus ratios of the microcalcifications were assessed with good accuracy and varied from 1.62 to 2.79, which corresponds with amorphous calcium phosphate. [ABSTRACT FROM AUTHOR]

Self-assembled monolayers were investigated for their suitability as two-dimensional scaffolds for the selective growth of alkanethiol edge structures. Heterostructures with chemical contrast could be grown, whose dimensions were governed by both the initial pattern sizes and the process time. n-Octadecanethiol (ODT) was made to expand from the edges of 16-mercaptohexadecanoic acid (MHDA) monolayer patterns. Likewise, 11-mercaptoundecanol (MUD) was grown on MHDA and on ODT monolayer edges. The results of these experiments are in accordance with the moving boundary model for monolayer spreading. In addition to such surface-bound spreading, a vapor-phase contribution to lateral monolayer growth was identified. MUD was observed to be an excellent ink for creating chemical contrast by means of regioselective deposition from a vapor phase. As a proof of principle, ribbons of 11-mercaptoundecanol with submicrometer widths were grown on pentaerythritol-tetrakis(3-mercaptopropionate) edges, and submicrometer wide gold lines were produced by subsequent wet-chemical etching. [ABSTRACT FROM AUTHOR]

Edge lithographic patterning techniques are based on the utilization of the edges of micrometer-sized template features for the reproduction of submicrometer structures. Edge transfer lithography (ETL) permits local surface modification in a single step by depositing self-assembled monolayers onto a metal substrate selectively along the feature edges of an elastomeric stamp. In this report two stamp designs are described that now allow for the use of alkanethiol inks in ETL and their use as etch resists to reproduce submicrometer structures in gold. Anisotropically modified stamps are shown to combine the potential for very high-resolution patterning with the versatility and simplicity of microcontact printing. [ABSTRACT FROM AUTHOR]

The article describes how a gold surface can be treated with an oxygen plasma to become an effective etch mask. Researches used a novel patterning scheme based upon microcontact printing (uCP) of a reductant ink. In uCP, functional molecules are transferred to a substrate upon contact with an inked, micropatterned and polymeric stamp.

Self-assembled monolayers were investigated for their suitability as two-dimensional scaffolds for the selective growth of alkanethiol edge structures. Heterostructures with chemical contrast could be grown, whose dimensions were governed by both the initial pattern sizes and the process time. n-Octadecanethiol (ODT) was made to expand from the edges of 16-mercaptohexadecanoic acid (MHDA) monolayer patterns. Likewise, 11-mercaptoundecanol (MUD) was grown on MHDA and on ODT monolayer edges. The results of these experiments are in accordance with the moving boundary model for monolayer spreading. In addition to such surface-bound spreading, a vapor-phase contribution to lateral monolayer growth was identified. MUD was observed to be an excellent ink for creating chemical contrast by means of regioselective deposition from a vapor phase. As a proof of principle, ribbons of 11-mercaptoundecanol with submicrometer widths were grown on pentaerythritol-tetrakis(3-mercaptopropionate) edges, and submicrometer wide gold lines were produced by subsequent wet-chemical etching.

Poly(dimethylsiloxane) (PDMS) is the most widely used stamp material in microcontact printing. It has excellent properties with respect to versatility, chemical inertness, and mechanical stability. However, it has an inclination to contaminate printed substrates with low molecular weight siloxane fragments. In this study, it is shown, by a combination of lateral force microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy, that the extent of the PDMS-induced contamination is dependent on the nature of the ink used. The highest degree of contamination was found for relatively polar inks, whereas apolar alkanethiol inks were found to shield the substrate from contamination. This is interpreted in terms of the contaminating species being polar in nature.

Edge lithographic patterning techniques are based on the utilization of the edges of micrometer-sized template features for the reproduction of submicrometer structures. Edge transfer lithography (ETL) permits local surface modification in a single step by depositing self-assembled monolayers onto a metal substrate selectively along the feature edges of an elastomeric stamp. In this report two stamp designs are described that now allow for the use of alkanethiol inks in ETL and their use as etch resists to reproduce submicrometer structures in gold. Anisotropically modified stamps are shown to combine the potential for very high-resolution patterning with the versatility and simplicity of microcontact printing.

Spreading in microcontact printing refers to the process or processes by which the ink molecules end up in the parts of the substrate that are adjacent to the contacted areas but which are not contacted themselves. This has been investigated for different inking concentrations of 16-mercaptohexadecanoic acid (MHDA). Spreading of MHDA takes place with retention of a well-defined demarcation. Feature sizes can be controlled by varying the contact times. Spreading, however, only takes place beyond a certain threshold concentration. For low ink concentrations the edges of stamp features dominate the ink transfer. For these low concentrations the extent of this edge dominance depends strongly on ink concentration rather than on contact time. These observations indicate a dominant role of the stamp surface in the processes of pattern formation and spreading.