Search

Nonideal interaction of sample with the separation device is a difficulty found in chromatographic methods as well as in field-flow fractionation. However, in field-flow fractionation (FFF), greater flexibility in the choice of carrier solution composition is possible, thus reducing the need of a wide choice of surface chemistry when nonideal sample interaction is to be minimized. The use of an ultrafiltration membrane as the surface for the accumulation wall is common practice in flow field-flow fractionation. Typical membranes in use are laminates of a skin membrane onto a backing material such as woven polyester. At this point, only a limited choice of membrane chemistries is available. Many membranes have been developed for protein applications as membranes are widely used in the pharmaceutical industries. While these membranes work well for protein applications, flow field-flow fractionation is applicable to polymeric particulate as well as protein samples. Thus, sample interaction with the membrane surface is possible with nonprotein applications and these interactions can induce significant secondary effects on retention ratio and affect instrumental reliability. Also, the woven texture of membranes may detrimentally affect the FFF separation. For these reasons, the study of flow field-flow fractionation using a flat, smooth surface of controlled chemistry is of relevance. We present here the results of a new, membraneless channel that uses a bare frit as the accumulation wall and that is intended for analysis of micrometer-sized particles only. Selectivity results are comparable to those obtained with the membrane, while relative sample recovery indicates that the best quantitative performance can be obtained without the membrane. Moreover, neither sample immobilization nor losses through the frit occur when operating membraneless. On the other hand, first experimental evidence of a certain level of frit surface activity suggests that optimization of experimental conditions is required.

Clofazimine (CLZ) is an antibiotic with a promising behavior against Gram-positive bacteria; however, the drug is completely insoluble in water and accumulates in fat tissues. We explored nanocarriers, labeled and not labeled with rhodamine, consisting of negatively charged sulfobutylether-β-cyclodextrins for CLZ loading. A new oligomeric carrier was obtained cross-linking βCyD with epichlorohydrin followed by sulfonation in a strongly alkaline aqueous medium. The oligomeric carrier has a MW of 53 kDa and forms small nanoparticles of a few tens of nm. With aqueous solutions containing a 25 mg/mL oligomeric carrier, we loaded up to 0.5 mg/mL of drug. The oligomers exhibited a 10-fold better loading capacity compared to monomers and formed nanoparticles with a size in the 20-60 nm range after drug loading. Circular dichroism confirmed encapsulation of the CLZ in the nanocarriers. All carriers with or without CLZ are not cytotoxic up to 1 μM, while CLZ alone is highly cytotoxic at the same concentration. The drug has IC 50 values below 100 nM against S. epidermidis. The same holds true also for clinical isolates of S. epidermidis, some displaying MDR. So, the selectivity index significantly increased for CLZ/carrier systems compared to the drug alone. Taken all together, our results open new avenues for the clinical application of this antibiotic.

Doxorubicin (DOX) entrapment in porous Fe(III)-trimesate metal organic frameworks (MIL-100(Fe)) nanoparticles was investigated in neutral Tris buffer via UV-vis absorption, circular dichroism (CD), and fluorescence. The binding constants and the absolute spectra of the DOX-MIL-100(Fe) complexes were determined via absorption and fluorescence titrations. A binding model where DOX associates as monomer to the dehydrated Fe3O (OH)(H2O)2 [(C6H3)(CO2)3]2 structural unit in 1:1 stoichiometry, with apparent association constant of (1.1 to 1.8) × 10(4) M(-1), was found to reasonably fit the experimental data. Spectroscopic data indicate that DOX binding occurs via the formation of highly stable coordination bonds between one or both deprotonated hydroxyl groups of the aglycone moiety and coordinatively unsaturated Fe(III) centers. Complete quenching of the DOX fluorescence and remarkable thermal and photochemical stability were observed for DOX incorporated in the MIL-100(Fe) framework.

Very monodisperse water-soluble silica core-surfactant shell nanoparticles (SCSS NPs) doped with a rhodamine B derivative were prepared using micelles of F127 as nanoreactors for the hydrolysis and condensation of the silica precursor tetraethoxysilane (TEOS). The functionalization of the rhodamines with a triethoxysilane group allowed the covalent binding of the fluorophores to the silica core: no leaking of the dye was observed when the NPs were purified either by ultrafiltration (UF) or dialysis. The diameter of the core (d(c) = 10 ± 1 nm) was determined by TEM and subtracted from the hydrodynamic diameter, measured by DLS, (d(H) = 24 nm, PdI = 0.1) to calculate the shell thickness (∼7 nm). The presence of a single population of NPs with a radius compatible with the one measured by DLS after UF was confirmed by AF4-MALS-RI measurements. The concentration of the NPs was measured by MALS-RI. This allowed us to determine the average number of rhodamine molecules per NP (10). The ability of the NPs to host hydrophobic species as cyanines in the SS was confirmed by fluorescence anisotropy measurements. Steady-state and time-resolved fluorescence measurements allowed us to observe the occurrence of a very efficient Förster resonance energy transfer process from the covalently linked rhodamines to the hosted cyanines. In particular, the analysis of the TCSPC data and steady-state measurements revealed that the adsorption of a single cyanine molecule causes an almost complete quenching of the fluorescence of the NP. Thanks to these observations, it was possible to easily determine the concentration of the NPs by fluorescence titration experiments. Results are in good agreement with the concentration values obtained by MALS-RI. Finally, the hosted cyanine molecule could be extracted with (±)-2-octanol, demonstrating the reversibility of the adsorption process.

The impurities present in recombinant protein drugs produced by large-scale refolding processes can not only affect the product safety but also interact with the expressed protein. To relate the impurity profile to conformation and functionality of the protein drug, analytical methods able not to degrade the sample components should be preferred. In this work, an urate oxidase (uricase) drug from Aspergillus flavus expressed in Saccharomyces cerevisiae, and a reagent-grade uricase from Candida sphaerica expressed in Escherichia coli, are analyzed by combining hollow-fiber flow field-flow fractionation with matrix-assisted laser desorption-ionization time-of-flight mass spectrometry (MALDI/TOFMS) and with chemiluminescence enzyme activity assay. Preliminary detection and identification of sample impurities is performed by means of conventional methods such as RP HPLC with electrospray ionization quadrupole-TOF MS and MALDI/TOFMS with SDS PAGE and 2D SDS PAGE. Results show that the recombinant uricase samples obtained from different microorganisms have different impurities and different enzymatic activity and that different uricase oligomers are present in solution.

Capabilities of mass spectrometry for the analysis of intact proteins can be increased through separation methods. Flow field-flow fractionation (FlFFF) is characterized by the particularly "soft" separation mechanism, which is ideally suited to maintain the native structure of intact proteins. This work describes the original on-line coupling between hollow-fiber FlFFF (HF FlFFF), the microcolumn variant of FlFFF, and electrospray ionization/time-of-flight mass spectrometry (ESI/TOFMS) for the analysis and characterization of intact proteins. The results show that the native (or pseudonative) structure of horse heart myoglobin and horseradish peroxidase is maintained. Sample desalting is also observed for horse heart myoglobin. Correlation between the molar mass values independently measured by HF FlFFF retention and ESI/TOFMS allows us to confirm the protein aggregation features of bovine serum albumin and to indicate possible changes in the quaternary structure of human hemoglobin.

This work proposes for the first time the use of hollow-fiber flow field-flow fractionation (HF FlFFF) for improved matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI/TOFMS) of whole bacteria. HF FlFFF has proved to be able to prepurify or fractionate different species of whole bacteria. Sample preparation by HF FlFFF gives improved spectra quality because noncellular components possibly present in the sample can be separated from the cells. When a mixture of two bacteria (Bacillus subtilis and Escherichia coli) is fractionated through HF FlFFF, MALDI/TOFMS analysis of each separated bacterial species preserves the most characteristic ion signals of the species without the presence of characteristic signals of the other species. The main advantages of HF FlFFF for MALDI/TOFMS analysis of whole bacteria are miniaturization, simplicity, and low cost of the fractionator components. This low cost makes disposable usage of the fractionator possible, thus eliminating the risk of run-to-run contamination of spectra due to sample carryover. The low fractionator volume yields bacterial fractionation on the order of a few minutes, which is comparable to MALDI/TOFMS analysis time. The small fractionation volume makes sample dilution low enough so that additional sample concentration steps are not strictly required to preserve MALDI/TOFMS detection.

Characterization of dispersed samples is an outstanding trend in analytical science. Among flow-assisted separation techniques for dispersed samples, size exclusion chromatography, hydrodynamic chromatography, and field-flow fractionation are the most widely applied. With dispersed analytes separated by these techniques, the UV/vis spectrophotometric detectors work as turbidimeters. To directly convert the analytical signal for quantitative analysis, the extinction properties of the dispersed analyte must be known. A new method is proposed to experimentally obtain-by single-run, flow-assisted separation with UV/vis diode-array detectors-the mass-size (or number-size) distribution function of the analytes when a retention-to-size relationship is either theoretically or empirically available for the chosen separation technique. This approach needs neither standards nor reliance on a method to predict the optical properties of the analytes. Theory and original algorithms are presented. Algorithms are then tested to optimize the numerical routines. Accuracy and robustness of the method are evaluated by simulation, and limitations for the application to experimental data are described. Finally, first application to field-flow fractionation shows validity of the method when applied to a few real cases.

Sorting and quantification of deactivated bacteria is an important way of quality control for whole-cell bacterial vaccines. In general, surface features of deactivated bacteria used for whole-cell bacterial vaccines affect the immunoresponse to bacteria-associated antigens. Enumeration of bacteria is also an important process development parameter for these vaccines. Field-flow fractionation (FFF) was previously applied to the separation of bacteria. For the first time, FFF is used for sorting bacteria strains of the same species on the basis of differences in bacterial membrane characteristics. Two FFF techniques, gravitational FFF (GrFFF) and asymmetrical flow FFF (AsFIFFF), are shown to be able to fractionate, distinguish, and quantify different deactivated Escherichia coli strains used for vaccines. E. coli can differ in the presence of fimbriae on the bacterial membrane. Fimbriae affect E. coli pathology and thus the use of E. coli for vaccines. GrFFF and AsFIFFF are able to fractionate fimbriated/ nonfimbriated cells in mixtures of different strains. While GrFFF is characterized by low cost and simplicity, As-FIFFF shows a higher performance in size fractionation with a high-speed separation. Coupled, on-line UV/visible turbidimetry yields the relative numbers of fractionated cells and sample recovery. Scanning electron microscopy and quasi-elastic light scattering are employed as uncorrelated techniques for size and morphology analysis of the E. coli strains.

The effect of particle-wall interaction on retention ratios in sedimentation field-flow fractionation (FFF) is shown to be describable in terms of a semiempirical parameter δ(w) having units of length. A method of experimentally determining the value of this parameter for a given system is presented. It requires the determination of retention ratios for a set of particle standards over a range of field strengths. The value of δ(w) is simply obtained from the slope of a certain straight line plot of the retention data. Once determined, this parameter may be incorporated into the procedure for the determination of particle diameters from measured retention times to take account of the effects of particle-wall interaction. In principle, δ(w) is independent of field strength and is the same for different FFF instruments providing they employ the same carrier liquid and channel wall material. Therefore, δ(w) values have the potential to be universal system constants transferable from one instrument to another.