Search

Escherichia coli is a commonly used platform for the production of heterologous proteins. Extraction and purification of intracellularly expressed recombinant proteins rely on efficient cell disruption. To facilitate downstream processing, controlled autolytic cells have been designed that lyse automatically to release intracellular proteins when triggered with an internal or external signal. In the cases when a weak promoter has to be adopted to control autolysis, cell lysis and product release progress slowly even in the presence of surfactants or other adjuvants. In this study, we report an improved autolytic E. coli strain controlled by a weak promoter with higher efficiency without the use of any facilitating chemical. Cell lysis was initiated upon arabinose-induced expression of T4 lysozyme with N-terminal fusion of amphipathic cell-penetrating peptides via a flexible peptide linker. Furthermore, genes involved in membrane permeability were individually deleted and screened for leaky phenotypes. Deletion of lpp (encoding Braun's lipoprotein) combined with the autolytic system caused 96% cell lysis in 4 h of induction and released 84% or 67% of mCherry or a super large Cas13a fusion protein (160.8 kDa), respectively, in 10 h of induction. This autolytic leaky strain shows great promise for protein recovery and library screening.

A subunit of factor XIII (FXIII-A) contains a unique activation peptide (AP) that protects the catalytic triad and prevents degradation. In plasma, FXIII is activated proteolytically (FXIII-A*) by thrombin and Ca 2+ cleaving AP, while in cytoplasm, it is activated nonproteolytically (FXIII-A°) with increased Ca 2+ concentrations. This study aimed to elucidate the role of individual parts of the FXIII-A AP in protein stability, thrombin activation, and transglutaminase activity. Recombinant FXIII-A AP variants were expressed, and SDS-PAGE was used to monitor thrombin hydrolysis at the AP cleavage sites R37-G38. Transglutaminase activities were assessed by cross-linking lysine mimics to Fbg αC (233-425, glutamine-substrate) and monitoring reactions by mass spectrometry and in-gel fluorescence assays. FXIII-A AP variants, S19P, E23K, and D24V, degraded during purification, indicating their vital role in FXIII-A 2 stability. Mutation of P36 to L36/F36 abolished the proteolytic cleavage of AP and thus prevented activation. FXIII-A N20S and P27L exhibited slower thrombin activation, likely due to the loss of key interdomain H-bonding interactions. Except N20S and P15L/P16L, all activatable FXIII-A* variants (P15L, P16L, S19A, and P27L) showed similar cross-linking activity to WT. By contrast, FXIII-A° P15L, P16L, and P15L/P16L had significantly lower cross-linking activity than FXIII-A° WT, suggesting that loss of these prolines had a greater structural impact. In conclusion, FXIII-A AP residues that play crucial roles in FXIII-A stability, activation, and activity were identified. The interactions between these AP amino acid residues and other domains control the stability and activity of FXIII.

To combat the permanent exposure to potential pathogens every organism relies on an immune system. Important factors in innate immunity are antimicrobial peptides (AMPs) that are structurally highly diverse. Some AMPs are known to belong to the saposin-like proteins (SAPLIPs), a group of polypeptides with a broad functional spectrum. The model organism Dictyostelium discoideum possesses a remarkably large arsenal of potential SAPLIPs, which are termed amoebapore-like peptides (Apls), but the knowledge about these proteins is very limited. Here, we report about the biochemical characterization of AplE1, AplE2, AplK1, and AplK2, which are derived from the two precursor proteins AplE and AplK, thereby resembling prosaposins of vertebrates. We produced these Apls as recombinant polypeptides in Escherichia coli using a self-splicing intein to remove an affinity tag used for purification. All recombinant Apls exhibited pore-forming activity in a pH-dependent manner, as evidenced by liposome depolarization, showing higher activities the more acidic the setting was. Lipid preference was detected for negatively charged phospholipids and in particular for cardiolipin. Antimicrobial activity against various bacteria was found to be inferior in classical microdilution assays. However, all of the Apls studied permeabilized the cytoplasmic membrane of live Bacillus subtilis . Collectively, we assume that the selected Apls interact by their cationic charge with negatively charged bacterial membranes in acidic environments such as phagolysosomes and eventually lyse the target cells by pore formation.

Lactococcus lactis is a crucial food-grade cell factory for secreting valuable peptides and proteins primarily via the Sec-dependent pathway. YidC, a membrane insertase, facilitates protein insertion into the lipid membrane for the translocation. However, the mechanistic details of how YidC affects protein secretion in L. lactis remain elusive. This study investigates the effects of deleting yidC1 / yidC2 on L. lactis phenotypes and protein secretion. Compared to the original strain, deleting yidC2 significantly decreased the relative biomass, electroporation efficiency, and F-ATP activity by 25%, 47%, and 33%, respectively, and weakened growth and stress resistance, whereas deleting yidC1 had a minimal impact. The absence of either yidC1 or yidC2 reduced target proteins secretion. Meanwhile, there is a considerable alteration in the transcription levels of genes involved in the secretion pathway, with secY transcription increasing over 135-fold. Our results provide a theoretical foundation for further improving target protein secretion and investigating the YidC function.

Fungal unspecific peroxygenases (UPOs) are gaining momentum in synthetic chemistry. Of special interest is the UPO from Marasmius rotula ( Mro UPO), which shows an exclusive repertoire of oxyfunctionalizations, including the terminal hydroxylation of alkanes, the α-oxidation of fatty acids and the C-C cleavage of corticosteroids. However, the lack of heterologous expression systems to perform directed evolution has impeded its engineering for practical applications. Here, we introduce a close ortholog of Mro UPO, a UPO gene from Marasmius wettsteinii ( Mwe UPO-1), that has a similar reaction profile to Mro UPO and for which we have set up a directed evolution platform based on tandem-yeast expression. Recombinant Mwe UPO-1 was produced at high titers in the bioreactor (0.7 g/L) and characterized at the biochemical and atomic levels. The conjunction of soaking crystallographic experiments at a resolution up to 1.6 Å together with the analysis of reaction patterns sheds light on the substrate preferences of this promiscuous biocatalyst.

This study aims to develop an efficient chitin-based purification system, leveraging a novel design where the target proteins, superfolding green fluorescent protein (sfGFP) and Thermus antranikianii trehalose synthase (TaTS), fused with a chitin-binding domain (ChBD) from Bacillus circulans WL-12 chitinase A1 and a tobacco etch virus protease (TEVp) cleavage site. This configuration allows for the effective immobilization of the target proteins on chitin beads, facilitating the removal of endogenous proteins. A mutant TEVp, H-TEVS219V-ChBD, fused with the His-tag and ChBD, is employed to cleave the target proteins from the chitin beads specifically. Subsequently, fresh chitin beads are added for adsorption to remove H-TEVS219V-ChBD in the solution, thereby significantly improving the purity of the target protein. Our results confirm that this system can efficiently and specifically purify and recover sfGFP and TaTS, achieving electrophoretic-grade purity exceeding 90%. This system holds significant potential for industrial production and other applications.

Ferulic acid (FA) exhibits antioxidant and anti-inflammatory properties, making it valuable for numerous industrial applications. Traditionally, FA is produced by the alkaline hydrolysis of γ -oryzanol, which is typically associated with wastewater generation. Recently, an increasing demand of natural FA necessitates its green production via enzymatic hydrolysis of γ -oryzanol, a mixture comprising triterpene alcohol ferulates and phytosteryl ferulates. Thus far, γ -oryzanol can be hydrolyzed by only four commercial cholesterol esterases with low yields. Herein, we report a recombinant cholesterol esterase from Mustela putorius furo (MPFCE) for the enzymatic hydrolysis of γ -oryzanol. The enzyme yielded 25.5% FA, which is the highest reported through enzymatic means thus far. The hydrolysis profile revealed that the enhanced yield primarily resulted from the near-complete hydrolysis of phytosteryl ferulates, together with slight hydrolysis of triterpene alcohol ferulates. MPFCE serves as a potential candidate for the enzymatic production of FA through targeted hydrolysis of γ -oryzanol.

Genomic integration of heterologous genes is the preferred approach in industrial fermentation-related strains due to the drawbacks associated with plasmid-mediated microbial fermentation, including additional growth burden, genetic instability, and antibiotic contamination. Synthetic biology and genome editing advancements have made gene integration convenient. Integrated expression is extensively used in the field of biomanufacturing and is anticipated to become the prevailing method for expressing recombinant proteins. Therefore, it is pivotal to strengthen the expression of exogenous genes at the genome level. Here, we systematically optimized the integrated expression system of Escherichia coli from 3 aspects. First, the integration site slmA with the highest expression activity was screened out of 18 sites in the ORI region of the E. coli BL21 (DE3) genome. Second, we characterized 16 endogenous promoters in E. coli and combined them with the T7 promoter. A constitutive promoter, Plpp-T7, exhibited significantly higher expression strength than the T7 promoter, achieving a 3.3-fold increase in expression levels. Finally, to further enhance the T7 expression system, we proceeded with overexpression of T7 RNA polymerase at the chassis cell level. The resulting constitutive efficient integrated expression system (CEIES_Ecoli) showed a 2-fold increase in GFP expression compared to the pET3b recombinant plasmid. Therefore, CEIES_Ecoli was applied to the integrated expression of nitrilase and hyaluronidase, achieving stable and efficient enzyme expression, with enzyme activities of 22.87 and 12,195 U·mL -1 , respectively, comparable to plasmid levels. Overall, CEIES_Ecoli provides a stable and efficient method of gene expression without the need for antibiotics or inducers, making it a robust tool for synthetic biology, enzyme engineering, and related applications.

The production of recombinant proteins has become a focal point in biotechnology, with potential applications in catalysis, therapeutics, and diagnostics. Before their application, these proteins undergo cumbersome downstream processing, including multiple resin-based chromatography steps (ion exchange or affinity-based) to isolate the protein of interest from host cell proteins, which are more abundant. These methods often involve (1) nonspecific binding of host cell proteins onto the resin, (2) a trial and error approach in determining elution conditions for the protein of interest, and (3) complex functionalization of the resin. These processes are also further supplemented with additional processing steps including buffer exchange through dialysis or desalting. Despite the prevalence and need for proteins, challenges persist in optimizing elution conditions and minimizing downstream processing steps, which contribute to the overall cost, impeding their translation into the market. To address these challenges, there has been a growing interest in stimuli-responsive purification systems, which allow for precise control and modulation of the purification process for protein recovery by altering their properties or behavior in response to specific external conditions, such as heat, light, or chemicals. We have developed a light-activated molecular purification (LAMP) system, a stimuli-responsive chromatography technique where the purification of recombinant proteins is triggered by light. We employed a photocleavable protein (PhoCl1) that binds specifically to Ni-NTA resin through a hexa-histidine tag at its N-terminus. We harnessed the ability of PhoCl1 to undergo photocleavage into two fragments for the development of LAMP. To demonstrate LAMP, the protein of interest (POI) is genetically fused to the C-terminus of PhoCl1. The exposure to 405 nm light (1.5 mW cm -2 for 12 h) results in the release of POI into the supernatant. We showcased the potential of LAMP by purifying highly charged green fluorescent proteins and an enzyme, riboflavin kinase. Our custom-built violet light LED setup achieved more than 50% light-induced photocleavage of the fusion constructs, resulting in the release of more than 30% of the POI into the supernatant, with the remainder retained within the resin. All the proteins purified using LAMP were more than 90% pure. Moreover, the comparison of the riboflavin kinase purified through LAMP and the traditional chromatography (Ni-NTA affinity method) revealed no significant changes in the activity levels. These highlight the broad potential of LAMP in providing a facile, yet robust stimuli-responsive protein purification technique, which leverages the potential of light to purify the proteins and overcome the limitations of current conventional chromatography systems.

Ovalbumin (OVA) is a high-quality protein for humans. Modifying microorganisms to produce proteins offers a solution to potential food protein shortages. In this study, OVA was expressed in Saccharomyces cerevisiae . Initially, screening signal peptides led to extracellular OVA reaching 3.4 mg/L using the INU1 signal peptide. Coexpressing Kar2 and PDI increased OVA production to 5.1 mg/L. Optimizing the expression levels of regulators OPI1, INO2, and INO4 expanded the endoplasmic reticulum membrane, raising yield to 5.5 mg/L. Combining both strategies increased OVA production to 6.2 mg/L, 82% higher than control. This strategy also enhanced secretion of other proteins. Finally, fed-batch fermentation in a 3-L bioreactor significantly boosted OVA production to 116.3 mg/L. This study provides insights for the heterologous synthesis of other high-quality proteins for future food applications.

The remarkable material properties of spider silk, such as its high toughness and tensile strength combined with its low density, make it a highly sought-after material with myriad applications. In addition, the biological nature of spider silk makes it a promising, potentially sustainable alternative to many toxic or petrochemical-derived materials. Therefore, interest in the heterologous production of spider silk proteins has greatly increased over the past few decades, making recombinant spider silk an important frontier in biomanufacturing. This has resulted in a diversity of potential host organisms, a large space for sequence design, and a variety of downstream processing techniques and product applications for spider silk production. Here, we highlight advances in each of these technical aspects as well as white spaces therein, still ripe for further investigation and discovery. Additionally, industry landscaping, patent analyses, and interviews with Key Opinion Leaders help define both the research and industry landscapes. In particular, we found that though textiles dominated the early products proposed by companies, the versatile nature of spider silk has opened up possibilities in other industries, such as high-performance materials in automotive applications or biomedical therapies. While continuing enthusiasm has imbued scientists and investors alike, many technical and business considerations still remain unsolved before spider silk can be democratized as a high-performance product. We provide insights and strategies for overcoming these initial hurdles, and we highlight the importance of collaboration between academia, industry, and policy makers. Linking technical considerations to business and market entry strategies highlights the importance of a holistic approach for the effective scale-up and commercial viability of spider silk bioproduction.

Collagen II (COL2) is the major component of cartilage tissue and is widely applied in pharmaceuticals, food, and cosmetics. In this study, COL fragments were extracted from human COL2 for secretory expression in Pichia pastoris . Three variants were successfully secreted by shake flask cultivation with a yield of 73.3-100.7 mg/L. The three COL2 variants were shown to self-assemble into triple-helix at 4 °C and capable of forming higher order assembly of nanofiber and hydrogel. The bioactivities of the COL2 variants were validated, showing that sample 205 exhibited the best performance for inducing fibroblast differentiation and cell migration. Meanwhile, sample 205 and 209 exhibited higher capacity for inducing in vitro blood clotting than commercial mouse COL1. To overexpress sample 205, the expression cassettes were constructed with different promoters and signal peptides, and the fermentation condition was optimized, obtaining a yield of 172 mg/L for sample 205. Fed-batch fermentation was carried out using a 5 L bioreactor, and the secretory protease Pep4 was knocked out to avoid sample degradation, finally obtaining a yield of 3.04 g/L. Here, a bioactive COL2 fragment was successfully identified and can be overexpressed in P. pastoris ; the variant may become a potential biomaterial for skin care.

Self-regeneration is a key function of living systems that needs to be recapitulated in vitro to create a living synthetic cell. A major limiting factor for protein self-regeneration in the PURE cell-free transcription-translation system is its high protein concentration, which far exceeds the system's protein synthesis rate. Here, we were able to drastically reduce the nonribosomal PURE protein concentration up to 97.3% while increasing protein synthesis efficiency. Although crowding agents were not effective in the original PURE formulation, we found that in highly dilute PURE formulations, addition of 6% dextran considerably increased protein synthesis rate and total protein yield. These new PURE formulations will be useful for many cell-free synthetic biology applications, and we estimate that PURE can now support the complete self-regeneration of all 36 nonribosomal proteins, which is a critical step toward the development of a universal biochemical constructor and living synthetic cell.

Fcγ-receptors (FcγRs) including FcγRII (CD32) gene family members are expressed on leukocytes, bind the crystallizable fragment (Fc) region of immunoglobulin G (IgG), and bridge humoral and cellular immunity. FcγRIIA and FcγRIIB have opposing roles, with the former responsible for activation and the latter for inhibition of immune cell signaling and effector functions. The extracellular domains of human and murine FcγRIIs share multiple conserved N- glycosylation sites. Understanding the role(s) of FcγRIIA and FcγRIIB glycosylation in autoimmune diseases is precluded by a lack of effective methods to study disease-associated changes in glycosylation. To address this barrier, we developed a method to assess site-specific glycosylation of human FcγRIIA and FcγRIIB, and the mouse ortholog of human FcγRIIB. Among the receptors, conserved glycosylation sites are compared, with the N144/145 site displaying predominantly complex glycans in recombinant FcγRIIs. Differences in sialylation between recombinant human FcγRIIA H/R134 (H/R131) variants at a nearby N145 N -glycosylation site are reported. Further, a potential human FcγRIIA O -glycosylation site, S179 (S212), is reported in recombinant FcγRIIA. The robust method to assess site-specific glycosylation of FcγRIIs reported here, can be utilized to study the potential role of FcγRII family glycosylation in disease. Data are available via ProteomeXchange with identifier PXD049429.

As a highly toxic mycotoxin, ochratoxin A (OTA) is widely contaminating agricultural products and has various toxicological effects. Bioenzymes for OTA degradation have shown promising potential for detoxification. Other than the efficient amidohydrolase ADH3 previously, two novel amidohydrolases ADH1 and AMD3 were obtained in this study. During Escherichia coli expression, the expressed protein solubility was very low and will limit future industrial application. Here, high copy number integrations were screened, and the amidohydrolases were efficiently secretory expressed by Pichia pastoris GS115. The protein yields from 1.0 L of fermentation supernatant were 53.5 mg for ADH1, 89.15 mg for ADH3, and 79.5 mg for AMD3. The catalytic efficiency ( K cat / K m ) of secretory proteins was 124.95 s -1 mM -1 for ADH3, 123.21 s -1 mM -1 for ADH1, and 371.99 s -1 mM -1 for AMD3. In comparison to E. coli expression, the active protein yields substantially increased 15.78-51.53 times. Meanwhile, two novel amidohydrolases (ADH1 and AMD3) showed much higher activity than ADH3 that produced by secretory expression.

The Gram-positive bacterium Bacillus subtilis is extensively used in the industry for the secretory production of proteins with commercial value. To further improve its performance, this microbe has been the subject of extensive genome engineering efforts, especially the removal of large genomic regions that are dispensable or even counterproductive. Here, we present the genome-reduced B. subtilis strain IIG-Bs-27-39, which was obtained through systematic deletion of mobile genetic elements, as well as genes for extracellular proteases, sporulation, flagella formation, and antibiotic production. Different from previously characterized genome-reduced B. subtilis strains, the IIG-Bs-27-39 strain was still able to grow on minimal media. We used this feature to benchmark strain IIG-Bs-27-39 against its parental strain 168 with respect to heterologous protein production and metabolic parameters during bioreactor cultivation. The IIG-Bs-27-39 strain presented superior secretion of difficult-to-produce staphylococcal antigens, as well as higher specific growth rates and biomass yields. At the metabolic level, changes in byproduct formation and internal amino acid pools were observed, whereas energetic parameters such as the ATP yield, ATP/ADP levels, and adenylate energy charge were comparable between the two strains. Intriguingly, we observed a significant increase in the total cellular NADPH level during all tested conditions and increases in the NAD + and NADP(H) pools during protein production. This indicates that the IIG-Bs-27-39 strain has more energy available for anabolic processes and protein production, thereby providing a link between strain physiology and production performance. On this basis, we conclude that the genome-reduced strain IIG-Bs-27-39 represents an attractive chassis for future biotechnological applications.

Phosphate plays a vital role in spider silk spinning and has been utilized in numerous artificial silk spinning attempts to replicate the remarkable mechanical properties of natural silk fiber. Its application in artificial processes has, however, yielded varying outcomes. It is thus necessary to investigate the origins and mechanisms behind these differences. By using recombinant silk protein SC-ADF3 derived from the garden spider Araneus diadematus , here, we describe its conformational changes under various conditions, elucidating the effect of phosphate on SC-ADF3 silk protein properties and interactions. Our results demonstrate that elevated phosphate levels induce the irreversible conformational conversion of SC-ADF3 from random coils to β-sheet structures, leading to decreased protein solubility over time. Furthermore, exposure of SC-ADF3 to phosphate stiffens already formed structures and reduces the ability to form new interactions. Our findings offer insights into the underlying mechanism through which phosphate-induced β-sheet structures in ADF3-related silk proteins impede fiber formation in the subsequent phases. From a broader perspective, our studies emphasize the significance of silk protein conformation for functional material formation, highlighting that the formation of β-sheet structures at the initial stages of protein assembly will affect the outcome of material forming processes.

The mono(2-hydroxyethyl) terephthalate hydrolase (MHETase) from Ideonella sakaiensis carries out the second step in the enzymatic depolymerization of poly(ethylene terephthalate) (PET) plastic into the monomers terephthalic acid (TPA) and ethylene glycol (EG). Despite its potential industrial and environmental applications, poor recombinant expression of MHETase has been an obstacle to its industrial application. To overcome this barrier, we developed an assay allowing for the medium-throughput quantification of MHETase activity in cell lysates and whole-cell suspensions, which allowed us to screen a library of engineered variants. Using consensus design, we generated several improved variants that exhibit over 10-fold greater whole-cell activity than wild-type (WT) MHETase. This is revealed to be largely due to increased soluble expression, which biochemical and structural analysis indicates is due to improved protein folding.

Escherichia coli , one of the most efficient expression hosts for recombinant proteins, is widely used in chemical, medical, food, and other industries. De novo engineering of gene regulation circuits and cell density-controlled E. coli cell lysis are promising directions for the release of intracellular bioproducts. Here, we developed an E. coli autolytic system, named the quorum sensing-mediated bacterial autolytic (QS-BA) system, by incorporating an acyl-homoserine lactone (AHL)-based YasI/YasR-type quorum sensing circuit from Pseudoalteromonas into E. coli cells. The results showed that the E. coli QS-BA system can release the intracellular bioproducts into the cell culture medium in terms of E. coli cell density, which offers an environmentally-friendly, economical, efficient, and flexible E. coli lysis platform for production of recombinant proteins. The QS-BA system has the potential to serve as an integrated system for the large-scale production of target products in E. coli for medical and industrial applications.

The enzymatic biodegradation of mycotoxins in food and feed has attracted the most interest in recent years. In this paper, the laccase gene from Bacillus swezeyi was cloned and expressed in Escherichia coli BL 21(D3). The sequence analysis indicated that the gene consisted of 1533 bp. The purified B. swezeyi laccase was analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis -12% with an estimated molecular weight of 56.7 kDa. The enzyme is thermo-alkali-tolerant, displaying the optimal degradation of zearalenone (ZEN) and aflatoxin B 1 (AFB 1 ) at pH 8 and 9, with incubation temperatures of 55 and 50 °C, respectively, within 24 h. The degradation potentials of the 50 μg of the enzyme against ZEN (5.0 μg/mL) and AFB 1 (2.5 μg/mL) were 99.60 and 96.73%, respectively, within 24 h. To the best of our knowledge, this is the first study revealing the recombinant production of laccase from B. swezeyi , its biochemical properties, and potential use in ZEN and AFB 1 degradation in vitro and in vivo.

Escherichia coli is often used as a factory to produce recombinant proteins. In many cases, the recombinant protein needs disulfide bonds to fold and function correctly. These proteins are genetically fused to a signal peptide so that they are secreted to the oxidizing environment of the periplasm (where the enzymes required for disulfide bond formation exist). Currently, it is difficult to determine in vivo whether a recombinant protein is efficiently secreted from the cytoplasm and folded in the periplasm or if there is a bottleneck in one of these steps because cellular capacity has been exceeded. To address this problem, we have developed a biosensor that detects cellular stress caused by (1) inefficient secretion of proteins from the cytoplasm and (2) aggregation of proteins in the periplasm. We demonstrate how the fluorescence fingerprint obtained from the biosensor can be used to identify induction conditions that do not exceed the capacity of the cell and therefore do not cause cellular stress. These induction conditions result in more effective biomass and in some cases higher titers of soluble recombinant proteins.

Tyrosinase is capable of oxidizing tyrosine residues in proteins, leading to intermolecular protein cross-linking, which could modify the protein network of food and improve the texture of food. To obtain the recombinant tyrosinase with microbial cell factory instead of isolation tyrosinase from the mushroom Agaricus bisporus , a TYR expression cassette was constructed in this study. The expression cassette was electroporated into Trichoderma reesei Rut-C30 and integrated into its genome, resulting in a recombinant strain C30-TYR. After induction with microcrystalline cellulose for 7 days, recombinant tyrosinase could be successfully expressed and secreted by C30-TYR, corresponding to approximately 2.16 g/L tyrosinase in shake-flask cultures. The recombinant TYR was purified by ammonium sulfate precipitation and gel filtration, and the biological activity of purified TYR was 45.6 U/mL. The purified TYR could catalyze the cross-linking of glycinin, and the emulsion stability index of TYR-treated glycinin emulsion was increased by 30.6% compared with the untreated one. The cross-linking of soy glycinin by TYR resulted in altered properties of oil-in-water emulsions compared to emulsions stabilized by native glycinin. Therefore, cross-linking with this recombinant tyrosinase is a feasible approach to improve the properties of protein-stabilized emulsions and gels.

Despite the considerable interest in the recombinant production of synthetic spider silk fibers that possess mechanical properties similar to those of native spider silks, such as the cost-effectiveness, tunability, and scalability realization, is still lacking. To address this long-standing challenge, we have constructed an artificial spider silk gene using Golden Gate assembly for the recombinant bacterial production of dragline-mimicking silk, incorporating all the essential components: the N-terminal domain, a 33-residue-long major-ampullate-spidroin-inspired segment repeated 16 times, and the C-terminal domain (N16C). This designed silk-like protein was successfully expressed in Escherichia coli , purified, and cast into films from formic acid. We produced uniformly 13 C- 15 N-labeled N16C films and employed solid-state magic-angle spinning nuclear magnetic resonance (NMR) for characterization. Thus, we could demonstrate that our bioengineered silk-like protein self-assembles into a film where, when hydrated, the solvent-exposed layer of the rigid, β-nanocrystalline polyalanine core undergoes a transition to an α-helical structure, gaining mobility to the extent that it fully dissolves in water and transforms into a highly dynamic random coil. This hydration-induced behavior induces chain dynamics in the glycine-rich amorphous soft segments on the microsecond time scale, contributing to the elasticity of the solid material. Our findings not only reveal the presence of structurally and dynamically distinct segments within the film's superstructure but also highlight the complexity of the self-organization responsible for the exceptional mechanical properties observed in proteins that mimic dragline silk.

Fe-S clusters are essential cofactors mediating electron transfer in respiratory and metabolic networks. However, obtaining active [4Fe-4S] proteins with heterologous expression is challenging due to (i) the requirements for [4Fe-4S] cluster assembly, (ii) the O 2 lability of [4Fe-4S] clusters, and (iii) copurification of undesired proteins (e.g., ferredoxins). Here, we established a facile and efficient protocol to express mature [4Fe-4S] proteins in the PURE system under aerobic conditions. An enzyme aconitase and thermophilic ferredoxin were selected as model [4Fe-4S] proteins for functional verification. We first reconstituted the SUF system in vitro via a stepwise manner using the recombinant SUF subunits (SufABCDSE) individually purified from E. coli . Later, the incorporation of recombinant SUF helper proteins into the PURE system enabled mRNA translation-coupled [4Fe-4S] cluster assembly under the O 2 -depleted conditions. To overcome the O 2 lability of [4Fe-4S] Fe-S clusters, an O 2 -scavenging enzyme cascade was incorporated, which begins with formate oxidation by formate dehydrogenase for NADH regeneration. Later, NADH is consumed by flavin reductase for FADH 2 regeneration. Finally, bifunctional flavin reductase, along with catalase, removes O 2 from the reaction while supplying FADH 2 to the SufBC 2 D complex. These amendments enabled a one-pot, two-step synthesis of mature [4Fe-4S] proteins under aerobic conditions, yielding holo-aconitase with a maximum concentration of ∼0.15 mg/mL. This renovated system greatly expands the potential of the PURE system, paving the way for the future reconstruction of redox-active synthetic cells and enhanced cell-free biocatalysis.

Engineered structural proteins, mimicking the structure and function of well-characterized natural proteins, are of great interest for diverse applications due to their outstanding mechanical performance and hierarchical structures. Broad efforts have been devoted to developing novel toolsets of genetically engineered structural proteins to explore advanced protein-based materials. With the rational design and structural optimization of artificially structural proteins and the improved biosynthetic methods, artificial protein assemblies have demonstrated outstanding mechanical performance comparable to those of natural protein materials, showing promising biomedical applications. In this Review, we outline recent advances in the fabrication of high-performance protein materials, highlighting the roles of biosynthesis, structural modification, and assembly in optimizing the materials' properties. The relationship between hierarchical structures and the mechanical performance of these recombinant structural proteins is discussed in detail. We emphasize the biomedical applications of high-performance structural proteins and their assemblies in the fields of high-strength protein fibers and adhesives. Finally, we discuss the trends and perspectives for the development of structural protein-based materials.

Vibrio natriegens is the fastest-growing bacteria, and its doubling time is less than 10 min. At present, the T7 expression system has been introduced into V. natriegens for heterologous protein expression, including the commercial strain V max 1 and the variant VnDX, 2 which is a backup expression chassis of Escherichia coli BL21(DE3). However, the strength of the existing T7 expression system is not optimal for every recombinant protein. The different expression strengths of T7 RNA polymerase (T7 RNAP) can be obtained by changing the promoter and ribosome binding site (RBS) sequences of T7 RNAP at different transcription and translation levels. In this work, we obtained a robust VnDX variant library with the fine-tuning T7 RNAP using the industrially used enzyme glucose dehydrogenase (GDH) as the reporter protein. Among this library, the variant VnDX-tet, whose promoter of T7 RNAP was changed from P lacUV 5 to P tet , showed that the reporter enzyme GDH activity was increased by 109% by the T7 expression system. Similarly, variants with different T7 RNAP translation levels were obtained by changing RBS sequences upstream of T7 RNAP, and the results showed that the variant VnDX-RBS12/pGDH had the highest GDH activity, which increased by 12.6%. The VnDX variant library constructed in this study with different T7 expression strengths provides a choice for expressing various recombinant proteins, greatly expanding the application of V. natriegens .

A need in synthetic biology is the ability to precisely and efficiently make flexible fully designed vectors that addresses challenging cloning strategies of single plasmids that rely on combinatorial co-expression of a multitude of target and bait fusion reporters useful in projects like library screens. For these strategies, the regulatory elements and functional components need to correspond perfectly to project specific sequence elements that facilitate easy exchange of these elements. This requires systematic implementation and building on recent improvements in Golden Gate (GG) that ensures high cloning efficiency for such complex vectors. Currently, this is not addressed in the variety of molecular GG cloning techniques in synthetic biology. Here, we present the bottom-up design and plasmid synthesis to prepare 10 kb functional yeast secrete and display plasmids that uses an optimized version of GG in combination with fluorogen-activating protein reporter technology. This allowed us to demonstrate nanobody/target protein interactions in a single cell, as detected by cell surface retention of secreted target proteins by cognate nanobodies. This validates the GG constructional approach and suggests a new approach for discovering protein interactions. Our GG assembly platform paves the way for vector-based library screening and can be used for other recombinant GG platforms.

Escherichia coli is one of the most widely utilized hosts for recombinant protein production, including that of membrane proteins (MPs). We have recently engineered a specialized E. coli strain for enhanced recombinant MP production, termed SuptoxR. By appropriately co-expressing the effector gene rraA , SuptoxR can suppress the high toxicity, which is frequently observed during the MP-overexpression process, and, at the same time, enhance significantly the cellular accumulation of membrane-incorporated and properly folded recombinant MP. The combination of these two beneficial effects results in dramatically enhanced volumetric yields for various prokaryotic and eukaryotic MPs. Here, we engineered second-generation SuptoxR strains with further improved properties, so that they can achieve even higher levels of recombinant MP production. We searched for naturally occurring RraA variants with similar or improved MP toxicity-suppressing and production-promoting effects to that of the native E. coli RraA of the original SuptoxR strain. We found that the RraA proteins from Proteus mirabilis and Providencia stuartii can be even more potent enhancers of MP productivity than the E. coli RraA. By exploiting these two newly identified RraAs, we constructed two second-generation SuptoxR strains, termed SuptoxR2.1 and SuptoxR2.2, whose MP-production capabilities often surpass those of the original SuptoxR significantly. SuptoxR2.1 and SuptoxR2.2 are expected to become widely useful expression hosts for recombinant MP production in bacteria.

Here, we describe a stress-tolerant, recyclable, and renewable biocatalyst platform based on T7 RNA polymerase-enabled high-density protein display on bacterial spores (TIED). TIED uses high-level T7 RNA polymerase-driven expression of recombinant proteins specifically in sporulating cells to allow spontaneous assembly of recombinant fusion proteins on the Bacillus subtilis spore surface. TIED enables high loading density in the range of 10 6 to 10 7 recombinant enzymes per spore, robust catalytic activity of displayed enzymes comparable to the respective free enzymes, and enhanced kinetic stability of displayed enzymes in methanol and elevated temperatures. Furthermore, we demonstrate TIED enzymes to be not only recyclable but also fully renewable after the loss of activity through induction of germination and sporulation, enabling perpetual regeneration of these immobilized biocatalysts.

The tiny spider makes dragline silk fibers with unbeatable toughness, all under the most innocuous conditions. Scientists have persistently tried to emulate its natural silk spinning process using recombinant proteins with a view toward creating a new wave of smart materials, yet most efforts have fallen short of attaining the native fiber's excellent mechanical properties. One reason for these shortcomings may be that artificial spider silk systems tend to be overly simplified and may not sufficiently take into account the true complexity of the underlying protein sequences and of the multidimensional aspects of the natural self-assembly process that give rise to the hierarchically structured fibers. Here, we discuss recent findings regarding the material constituents of spider dragline silk, including novel spidroin subtypes, nonspidroin proteins, and possible involvement of post-translational modifications, which together suggest a complexity that transcends the two-component MaSp1/MaSp2 system. We subsequently consider insights into the spidroin domain functions, structures, and overall mechanisms for the rapid transition from disordered soluble protein into a highly organized fiber, including the possibility of viewing spider silk self-assembly through a framework relevant to biomolecular condensates. Finally, we consider the concept of "biomimetics" as it applies to artificial spider silk production with a focus on key practical aspects of design and evaluation that may hopefully inform efforts to more closely reproduce the remarkable structure and function of the native silk fiber using artificial methods.

Overexpression of heterologous proteins from plants, bacteria, and human as fusion constructs in cyanobacteria has been documented in the literature. Typically, the heterologous protein "P" of interest is expressed as a fusion with the abundant CpcB β-subunit of phycocyanin (PC), which was placed in the leader sequence position. The working hypothesis for such overexpressions is that CpcB*P fusion proteins somehow accumulate in a soluble and stable form in the cytosol of the cyanobacteria, retaining the activity of the trailing heterologous "P" protein of interest. The present work revealed a substantially different and previously unobvious picture, comprising the following properties of the above-mentioned CpcB*P fusion constructs: (i) the CpcB*P proteins assemble as functional (α,β*P) 3 CpcG heterohexameric discs, where α is the CpcA α-subunit of PC, β*P is the CpcB*P fusion protein, the asterisk denotes fusion, and CpcG is the 28.9 kDa PC disc linker polypeptide CpcG1. (ii) The (α,β*P) 3 CpcG1 complexes covalently bind one open tetrapyrrole bilin co-factor per α-subunit and two bilins per β-subunit. (iii) The (α,β*P) 3 CpcG1 heterohexameric discs are functionally attached to the Synechocystis allophycocyanin (AP) core cylinders and efficiently transfer excitation energy from the assembled (α,β*P) 3 CpcG1 heterohexamer to the PSII reaction center, enhancing the rate of photochemical charge separation and electron transfer activity in this photosystem. (iv) In addition to the human interferon α-2 and tetanus toxin fragment C tested in this work, we have shown that enzymes such as the plant-origin isoprene synthase, β-phellandrene synthase, geranyl diphosphate synthase, and geranyl linalool synthase are also overexpressed, while retaining their catalytic activity in the respective fusion construct configuration. (v) Folding models for the (α,β*P) 3 CpcG1 heterohexameric discs showed the recombinant proteins P to be radially oriented with respect to the (α,β) 3 compact disc. Elucidation of the fusion construct configuration and function will pave the way for the rational design of fusion constructs harboring and overexpressing multiple proteins of scientific and commercial interest.

Pichia pastoris ( P. pastoris ) is the workhorse in the commercial production of many valuable proteins. Traditionally, the regulation of gene expression in P. pastoris is achieved through induction by methanol which is toxic and flammable. The emerging optogenetic technology provides an alternative and cleaner gene regulation method. Based on the photosensitive protein EL222, we designed a novel "one-component" optogenetic system. The highest induction ratio was 79.7-fold under blue light compared to the group under darkness. After switching cells from dark to blue illumination, the system induced expression in just 1 h. Only 2 h after the system was switched back to the darkness from blue illumination, the target gene expression was inactivated 5-fold. The induction intensity of the optogenetic system is positively correlated with the dose and periodicity of blue illumination, and it has good spatial control. These results provide the first credible case of optogenetically induced protein expression in P. pastoris .

The T-cell protein tyrosine phosphatase (TCPTP/PTPN2) targets a broad variety of substrates across different subcellular compartments. In spite of that, the structural basis for the regulation of TCPTP's activity remains elusive. Here, we investigated whether the activity of TCPTP is regulated by a potential allosteric site in a comparable manner to its most similar PTP family member (PTP1B/PTPN1). We determined two crystal structures of TCPTP at 1.7 and 1.9 Å resolutions that include helix α7 at the TCPTP C-terminus. Helix α7 has been functionally characterized in PTP1B and was identified as its allosteric switch. However, its function is unknown in TCPTP. Here, we demonstrate that truncation or deletion of helix α7 reduced the catalytic efficiency of TCPTP by ∼4-fold. Collectively, our data supports an allosteric role of helix α7 in regulation of TCPTP's activity, similar to its function in PTP1B, and highlights that the coordination of helix α7 with the core catalytic domain is essential for the efficient catalytic function of TCPTP.

The G-protein-gated inwardly rectifying potassium channel 4 (Kir3.4) subunit forms functional tetramers. Previous studies have established that phosphatidylinositol 4,5-bisphosphate (PI(4,5)P 2 ) is required for Kir3.4 function. However, the binding preferences of Kir3.4 for the headgroup and acyl chains of phosphorylated phosphatidylinositides (PIPs) and other lipids are not well understood. Here, the interactions between full-length, human Kir3.4 and lipids are characterized using native mass spectrometry (MS) in conjunction with a soluble fluorescent lipid-binding assay. Kir3.4 displays binding preferences for PIPs, and, in some cases, the degree of binding is influenced by the type of acyl chains. The interactions between Kir3.4 and PIPs are weaker in comparison to full-length, human Kir3.2. The binding of PI(4,5)P 2 modified with a fluorophore to Kir3.2 can be enhanced by other lipids, such as phosphatidylcholine. Introduction of S143T, a mutation that enhances Kir3.4 activity, results in an overall reduction in the channel binding PIPs. In contrast, the D223N mutant of Kir3.4 that mimics the sodium-bound state exhibited stronger binding for PI(4,5)P 2 , particularly for those with 18:0-20:4 acyl chains. Taken together, these results provide additional insight into the interaction between Kir3.4 and lipids that are important for channel function.

Catalytic promiscuity is the coincidental ability to catalyze nonbiological reactions in the same active site as the native biological reaction. Several lines of evidence show that catalytic promiscuity plays a role in the evolution of new enzyme functions. Thus, studying catalytic promiscuity can help identify structural features that predispose an enzyme to evolve new functions. This study identifies a potentially preadaptive residue in a promiscuous N -succinylamino acid racemase/ o -succinylbenzoate synthase (NSAR/OSBS) enzyme from Amycolatopsis sp. T-1-60. This enzyme belongs to a branch of the OSBS family which includes many catalytically promiscuous NSAR/OSBS enzymes. R266 is conserved in all members of the NSAR/OSBS subfamily. However, the homologous position is usually hydrophobic in other OSBS subfamilies, whose enzymes lack NSAR activity. The second-shell amino acid R266 is close to the catalytic acid/base K263, but it does not contact the substrate, suggesting that R266 could affect the catalytic mechanism. Mutating R266 to glutamine in Amycolatopsis NSAR/OSBS profoundly reduces NSAR activity but moderately reduces OSBS activity. This is due to a 1000-fold decrease in the rate of proton exchange between the substrate and the general acid/base catalyst K263. This mutation is less deleterious for the OSBS reaction because K263 forms a cation-π interaction with the OSBS substrate and/or the intermediate, rather than acting as a general acid/base catalyst. Together, the data explain how R266 contributes to NSAR reaction specificity and was likely an essential preadaptation for the evolution of NSAR activity.

Green fluorescent protein (GFP)-like fluorescent proteins have been found in more than 120 species. Although the proteins have little sequence identity, Gly31, 33, and 35 are 87, 100, and 95% conserved across all species, respectively. All GFP-like proteins have a β-barrel structure composed of 11 β-sheets, and the 3 conserved glycines are located in the second β-sheet. Molecular dynamics (MD) simulations have shown that mutating one or more of the glycines to alanines most likely does not reduce chromophore formation in correctly folded immature fluorescent proteins. MD and protein characterization of alanine mutants indicate that mutation of the conserved glycines leads to misfolding. Gly31, 33, and 35 are essential to maintain the integrity of the β 1-3 triad that is the last structural element to slot in place in the formation of the canonical fluorescent protein β-barrel. Glycines located in β-sheets may have a similar role in the formation of other non-GFP β-barrels.

Bifunctional enzymes, which contain two domains with opposing enzymatic activities, are widely distributed in bacteria, but the regulatory mechanism(s) that prevent futile cycling are still poorly understood. The recently described bifunctional enzyme, DcpG, exhibits unusual heme properties and is surprisingly able to differentially regulate its two cyclic dimeric guanosine monophosphate (c-di-GMP) metabolic domains in response to heme gaseous ligands. Mutagenesis of heme-edge residues was used to probe the heme pocket and resulted in decreased O 2 dissociation kinetics, identifying roles for these residues in modulating DcpG gas sensing. In addition, the resonance Raman spectra of the DcpG wild type and heme-edge mutants revealed that the mutations alter the heme electrostatic environment, vinyl group conformations, and spin state population. Using small-angle X-ray scattering and negative stain electron microscopy, the heme-edge mutations were demonstrated to cause changes to the protein conformation, which resulted in altered signaling transduction and enzyme kinetics. These findings provide insights into molecular interactions that regulate DcpG gas sensing as well as mechanisms that have evolved to control multidomain bacterial signaling proteins.

A new method to trap catalytic intermediate species was employed with Fe-type nitrile hydratase from Rhodococcus equi TG328-2 ( Re NHase). Re NHase was incubated with substrates in a 23% (w/w) NaCl/H 2 O eutectic system that remained liquid at -20 °C, thereby permitting the observation of transient species that were present at electron paramagnetic resonance (EPR)-detectable levels in samples frozen while in the steady state. Fe III -EPR signals from the resting enzyme were unaffected by the presence of 23% NaCl, and the catalytic activity was ∼55% that in the absence of NaCl at the optimum pH of 7.5. The reaction of Re NHase in the eutectic system at -20 °C with the substrates acetonitrile or benzonitrile induced significant changes in the EPR spectra. A previously unobserved signal with highly rhombic g -values ( g 1 = 2.31) was observed during the steady state but did not persist beyond the exhaustion of the substrate, indicating that it arises from a catalytically competent intermediate. Distinct signals due to product complexes provide a detailed mechanism for product release, the rate-limiting step of the reaction. Assignment of the observed EPR signals was facilitated by density functional theory calculations, which provided candidate structures and g -values for various proposed Re NHase intermediates. Collectively, these results provide new insights into the catalytic mechanism of NHase and offer a new approach for isolating and characterizing EPR-active intermediates in metalloenzymes.

The copper-dependent lytic polysaccharide monooxygenases (LPMOs) are receiving attention because of their role in the degradation of recalcitrant biomass and their intriguing catalytic properties. The fundamentals of LPMO catalysis remain somewhat enigmatic as the LPMO reaction is affected by a multitude of LPMO- and co-substrate-mediated (side) reactions that result in a complex reaction network. We have performed kinetic studies with two LPMOs that are active on soluble substrates, Nc AA9C and Ls AA9A, using various reductants typically employed for LPMO activation. Studies with Nc AA9C under "monooxygenase" conditions showed that the impact of the reductant on catalytic activity is correlated with the hydrogen peroxide-generating ability of the LPMO-reductant combination, supporting the idea that a peroxygenase reaction is taking place. Indeed, the apparent monooxygenase reaction could be inhibited by a competing H 2 O 2 -consuming enzyme. Interestingly, these fungal AA9-type LPMOs were found to have higher oxidase activity than bacterial AA10-type LPMOs. Kinetic analysis of the peroxygenase activity of Nc AA9C on cellopentaose revealed a fast stoichiometric conversion of high amounts of H 2 O 2 to oxidized carbohydrate products. A k cat value of 124 ± 27 s -1 at 4 °C is 20 times higher than a previously described k cat for peroxygenase activity on an insoluble substrate (at 25 °C) and some 4 orders of magnitude higher than typical "monooxygenase" rates. Similar studies with Ls AA9A revealed differences between the two enzymes but confirmed fast and specific peroxygenase activity. These results show that the catalytic site arrangement of LPMOs provides a unique scaffold for highly efficient copper redox catalysis.

Methionine adenosyltransferase (MAT) catalyzes the adenosine 5'-triphosphate (ATP) and l-methionine (l-Met) dependent formation of S -adenosyl-l-methionine (SAM), the principal methyl donor of most biological transmethylation reactions. We carried out in-depth kinetic studies to further understand its mechanism and interaction with a potential regulator, Mat2B. The initial velocity pattern and results of product inhibition by SAM, phosphate, and pyrophosphate, and dead-end inhibition by the l-Met analog cycloleucine (l-cLeu) suggest that Mat2A follows a strictly ordered kinetic mechanism where ATP binds before l-Met and with SAM released prior to random release of phosphate and pyrophosphate. Isothermal titration calorimetry (ITC) showed binding of ATP to Mat2A with a K d of 80 ± 30 μM, which is close to the K m(ATP) of 50 ± 10 μM. In contrast, l-Met or l-cLeu showed no binding to Mat2A in the absence of ATP; however, binding to l-cLeu was observed in the presence of ATP. The ITC results are fully consistent with the product and dead-inhibition results obtained. We also carried out kinetic studies in the presence of the physiological regulator Mat2B. Under conditions where all Mat2A is found in complex with Mat2B, no significant change in the kinetic parameters was observed despite confirmation of a very high binding affinity of Mat2A to Mat2B ( K d of 6 ± 1 nM). Finally, we found that while Mat2A is unstable at low concentrations (<100 nM), rapidly losing activity at 37 °C, it retained full activity for at least 2 h when Mat2B was present at the known 2:1 Mat2A/Mat2B stoichiometry.

Supercharged proteins exhibit high solubility and other desirable properties, but no engineered superpositively charged enzymes have previously been made. Superpositively charged variants of proteins such as green fluorescent protein have been efficiently encapsulated within Archaeoglobus fulgidus thermophilic ferritin (AfFtn). Encapsulation by supramolecular ferritin can yield systems with a variety of sequestered cargo. To advance applications in enzymology and green chemistry, we sought a general method for supercharging an enzyme that retains activity and is compatible with AfFtn encapsulation. The zinc metalloenzyme human carbonic anhydrase II (hCAII) is an attractive encapsulation target based on its hydrolytic activity and physiologic conversion of carbon dioxide to bicarbonate. A computationally designed variant of hCAII contains positively charged residues substituted at 19 sites on the protein's surface, resulting in a shift of the putative net charge from -1 to +21. This designed hCAII(+21) exhibits encapsulation within AfFtn without the need for fusion partners or additional reagents. The hCAII(+21) variant retains esterase activity comparable to the wild type and spontaneously templates the assembly of AfFtn 24mers around itself. The AfFtn-hCAII(+21) host-guest complex exhibits both greater activity and thermal stability when compared to hCAII(+21). Upon immobilization on a solid support, AfFtn-hCAII(+21) retains enzymatic activity and exhibits an enhancement of activity at elevated temperatures.

Protein L affinity chromatography is a useful method for the purification of antibody fragments containing kappa light chains. In affinity chromatography, increasing the binding affinity leads to increased product purity, recovery, and dynamic binding capacity (DBC). In this study, molecular docking and molecular dynamics simulation techniques were used to design the engineered Protein L with higher affinity to the kappa light chain. Each engineered ligand was produced as a recombinant protein and coupled to a solid matrix. The purity, recovery, and DBC of the engineered resins were evaluated and then compared to those of a commercially available resin. The results showed important parameters for engineering more efficient Protein L ligands for affinity chromatography.

Chromosomal integration of exogenous genes is preferred for industrially related fermentation, as plasmid-mediated fermentation leads to extra metabolic burden and genetic instability. Moreover, with the development and advancement of genome engineering and gene editing technologies, inserting genes into chromosomes has become more convenient; integration expression is extensively utilized in microorganisms for industrial bioproduction and expected to become the trend of recombinant protein expression. However, in actual research and application, it is important to enhance the expression of heterologous genes at the host genome level. Herein, we summarized the basic principles and characteristics of genomic integration; furthermore, we highlighted strategies to improve the expression of chromosomal integration of genes and pathways in host strains from three aspects, including chassis cell optimization, regulation of expression elements in gene expression cassettes, optimization of gene dose level and integration sites on chromosomes. Moreover, we reviewed and summarized the relevant studies on the application of integrated expression in the exploration of gene function and the various types of industrial microorganism production. Consequently, this review would serve as a reference for the better application of integrated expression.

Conjugation of biologics with polymers modulates their pharmacokinetics, with polyethylene glycol (PEG) as the gold standard. We compared alternative polymers and two types of cyclooctyne linkers (BCN/DBCO) for bioconjugation of interferon-α2a (IFN-α2a) using 10 kDa polymers including linear mPEG, poly(2-ethyl-2-oxazoline) (PEtOx), and linear polyglycerol (LPG). IFN-α2a was azide functionalized via amber codon expansion and bioorthogonally conjugated to all cyclooctyne linked polymers. Polymer conjugation did not impact IFN-α2a's secondary structure and only marginally reduced IFN-α2a's bioactivity. In comparison to PEtOx, the LPG polymer attached via the less rigid cyclooctyne linker BCN was found to stabilize IFN-α2a against thermal stress. These findings were further detailed by molecular modeling studies which showed a modulation of protein flexibility upon PEtOx conjugation and a reduced amount of protein native contacts as compared to PEG and LPG originated bioconjugates. Polymer interactions with IFN-α2a were further assessed via a limited proteolysis (LIP) assay, which resulted in comparable proteolytic cleavage patterns suggesting weak interactions with the protein's surface. In conclusion, both PEtOx and LPG bioconjugates resulted in a similar biological outcome and may become promising PEG alternatives for bioconjugation.

One attractive feature of the baculovirus-insect cell system (BICS) is the baculoviral genome has a large capacity for genetic cargo. This enables construction of viral vectors designed to accept multigene insertions, which has facilitated efforts to produce recombinant multisubunit protein complexes. However, the large genetic capacity of baculovirus vectors has not yet been exploited for multistep pathway engineering. Therefore, we created PolyBac, which is a novel baculovirus shuttle vector, or bacmid, that can be used for this purpose. PolyBac was designed to accept multiple transgene insertions by three different mechanisms at three different sites within the baculovirus genome. After constructing and characterizing PolyBac, we used it to isolate nine derivatives encoding various combinations of up to eight different protein N -glycosylation pathway functions, or glycogenes. We then used these derivatives, which were designed to progressively extend the endogenous insect cell pathway, to assess PolyBac's utility for protein glycosylation pathway engineering. This assessment was enabled by engineering each derivative to produce a recombinant influenza hemagglutinin (rH5), which was used to probe the impact of each glycoengineered PolyBac derivative on the endogenous insect cell pathway. Genetic analyses of these derivatives confirmed PolyBac can accept large DNA insertions. Biochemical analyses of the rH5 products showed each had distinct N -glycosylation profiles. Finally, the major N -glycan on each rH5 product was the predicted end product of the engineered N -glycosylation pathways encoded by each PolyBac derivative. These results generally indicate that PolyBac has utility for multistep metabolic pathway engineering and directly demonstrate that this new bacmid can be used for customized protein glycosylation pathway engineering in the BICS.

The phototrophic bacterium Rhodopseudomonas palustris is emerging as a promising biotechnological chassis organism, due to its resilience to a range of harsh conditions, a wide metabolic repertoire, and the ability to quickly regenerate ATP using light. However, realization of this promise is impeded by a lack of efficient, rapid methods for genetic modification. Here, we present optimized tools for generating chromosomal insertions and deletions employing electroporation as a means of transformation. Generation of markerless strains can be completed in 12 days, approximately half the time for previous conjugation-based methods. This system was used for overexpression of alternative nitrogenase isozymes with the aim of improving biohydrogen productivity. Insertion of the pucBa promoter upstream of vnf and anf nitrogenase operons drove robust overexpression up to 4000-fold higher than wild-type. Transcript quantification was facilitated by an optimized high-quality RNA extraction protocol employing lysis using detergent and heat. Overexpression resulted in increased nitrogenase protein levels, extending to superior hydrogen productivity in bioreactor studies under nongrowing conditions, where promoter-modified strains better utilized the favorable energy state created by reduced competition from cell division. Robust heterologous expression driven by the pucBa promoter is thus attractive for energy-intensive biosyntheses suited to the capabilities of R. palustris . Development of this genetic modification toolset will accelerate the advancement of R. palustris as a biotechnological chassis organism, and insights into the effects of nitrogenase overexpression will guide future efforts in engineering strains for improved hydrogen production.

Hypoparathyroidism (HP) is a rare disease with clinical manifestations of hypocalcemia and hyperphosphatemia, resulting from deficient or absent parathyroid hormone (PTH) secretion. Conventional treatment for patients with HP involves extensive calcium and vitamin D supplementation. In 2015, PTH1-84 was approved by the United States Food and Drug Administration as an adjunct for HP patients who cannot be well-controlled on conventional treatment. However, PTH1-84 therapy requires a daily injection, leading to poor patient compliance. The purpose of this study was to develop a long-acting PTH1-34 analogue by increasing its affinity to albumin. Three PTH1-34 variants were generated by substituting two of the three lysine (Lys) residues with arginine, reserving a single Lys as the modification site in each sequence. A series of side chains, containing fatty acid, deoxycholic acid, or biotin groups, were synthesized to modify these PTH1-34 variants by using a solid-liquid phase synthesis approach. In vitro bioactivity and albumin affinity tests were used to screen these new PTH1-34 analogues. Finally, Lys27-AAPC was selected from 69 synthesized analogues as a candidate therapeutic compound because it retained potency and exhibited a high albumin-binding capacity. In pharmacodynamic experiments, Lys27-AAPC demonstrated enhanced and prolonged efficacy in serum calcium elevating relative to PTH1-84. Moreover, a lyophilized powder for injection containing Lys27-AAPC was developed for further testing and represented a potential long-acting HP treatment.

Endogenous long-chain metabolites of vitamin E (LCMs) mediate immune functions by targeting 5-lipoxygenase (5-LOX) and increasing the systemic concentrations of resolvin E3, a specialized proresolving lipid mediator. SAR studies on semisynthesized analogues highlight α-amplexichromanol ( 27a ), which allosterically inhibits 5-LOX, being considerably more potent than endogenous LCMs in human primary immune cells and blood. Other enzymes within lipid mediator biosynthesis were not substantially inhibited, except for microsomal prostaglandin E 2 synthase-1. Compound 27a is metabolized by sulfation and β-oxidation in human liver-on-chips and exhibits superior metabolic stability in mice over LCMs. Pharmacokinetic studies show distribution of 27a from plasma to the inflamed peritoneal cavity and lung. In parallel, 5-LOX-derived leukotriene levels decrease, and the inflammatory reaction is suppressed in reconstructed human epidermis, murine peritonitis, and experimental asthma in mice. Our study highlights 27a as an orally active, LCM-inspired drug candidate that limits inflammation with superior potency and metabolic stability to the endogenous lead.

Lactoferrin (LF) is a bioactive glycoprotein in human milk and has positive effects on neonates. The LF knockout mouse model was generated as a mother mouse that provided LF-free milk. The intestinal development of suckling neonates drinking normal milk and LF-free milk was studied. The results showed that the intestinal density, maturity, and barrier integrity of mice drinking LF-free milk were lower than those of mice drinking normal milk. Therefore, the importance of adding lactoferrin to the human formula is considered. Human lactoferrin (HLF), bovine lactoferrin (BLF), and recombinant HLF (RHLF) were used to compare their functional impact on Caco-2 cell lines. Cell proliferation, differentiation, the establishment of the intestinal barrier, and protective effects on lipopolysaccharide injury were detected. Our results showed that RHLF exhibited more similar functions to HLF than BLF and showed the combined advantages of HLF and BLF in promoting the establishment of the intestinal barrier. This study emphasizes the important role of LF in neonatal intestinal development and provides a theoretical basis for the availability of RHLF.