Search

The study of palladium-catalyzed amination of bromobenzene with aromatic and heterocyclic amines, widely used in the synthesis of organic semiconductors, was performed. The best conditions for the coupling of aryl bromides with carbazole, diphenylamine, phenoxazine, phenothiazine, 9,9-dimethyl-9,10-dihydroacridine, and their derivatives have been developed. Based on the results, nine new star-shaped organic semiconductors, exhibiting up to 100% fluorescent quantum yield in the 400-550 nm range, have been synthesized in good yields. The TDDFT calculations of the absorption spectra revealed a good correlation with experimental results and slight solvatochromic effects with a change in the polarity of the solvent.

Functionalization-induced phase transitions in polymer systems in which a postpolymerization reaction drives polymers to organize into colloidal aggregates are a versatile method to create nanoscal...

A nitrogen-containing covalent organic framework obtained from the polymerization of 1,3-dicyanobenzene has been used as a starting material for the synthesis of Fe/N/C catalysts for the oxygen reduction reaction (ORR). In this work we report the effect of the thermal treatments on the nature and catalytic properties of the catalysts obtained after the thermal treatments. After the first thermal treatment, the catalysts obtained contain metallic iron and iron carbide particles, along with a minority fraction of inorganic FeNx sites. After acid leaching and a second thermal treatment, FeNx sites remain in the catalysts, along with a minor fraction of graphite-wrapped Fe3C particles. Both catalysts display high activity for the ORR, with the catalyst subjected to acid leaching and a second thermal treatment, 2HT-1,3DCB, displaying higher ORR activity and a lower production of H2O2. This observation suggests that iron particles, such as Fe3C, display ORR activity but mainly toward the two-electron pathway. On the contrary, FeNx ensembles promote the ORR via the four-electron pathway, that is, via H2O formation.

The bifunctional ligands of isonicotinic acid (Py-4-COOH) and 4-pyrid-4-ylbenzoic acid (Pybz-4-COOH) instead of polypyridines were therefore reacted with (Re(CO)4)3(C3N3S3) (C3N3S3 = cyanurate trianion), resulting in the formation of two trinuclear [(Re(CO)3)3(C3N3S3)(Py-4-COOH)3] (1) and [(Re(CO)3)3(C3N3S3)(Pybz-4-COOH)3] (2), respectively. In the meantime, both complexes 1 and 2 are connected by three bifurcated hydrogen bonds between their carboxylic acid moieties Py-4-COOH and Pybz-4-COOH to form the supramolecular trigonal-prismatic and -antiprismatic structures, respectively. It is noted that complex 1 can further react with copper(II) nitrate upon deprotonation to give nonanuclear [(Re(CO)3)3(C3N3S3)(Py-4-COO)3]2Cu3(H2O)9 (3), where two trinuclear [(Re(CO)3)3(C3N3S3)(Py-4-COO)3] moieties are connected by three penta-coordinate copper(II) ions, each coordinating to two carboxylates and three water molecules, to form the trigonal-prismatic structure. Surprisingly, addition of pyrazine (pz) in the synthetic process of complex 3 resulted in serendipitous isolation of a rare example of octadecanuclear {[(Re(CO)3)3(C3N3S3)(Py-4-COO)3]2Cu3(H2O)6(pz)2}2 (4), which can be regarded as a dimer of complex 3, connected by two bridging pz ligands. Interestingly, both complexes 3 and 4 are heteronuclear molecular Re(I)-Cu(II) boxes, constructed by a complex-as-a-ligand strategy. Furthermore, complexes 1 and 2 can exhibit respective low-energy luminescence at ca. 561 and 534 nm at room temperature upon photoexcitation, and complex 3 is found to display antiferromagnetic coupling of −127.68 and −134.70 cm–1, possibly due to multiple hydrogen bonds inducing significant Cu(II)···Cu(II) coupling.

Herein, we present the first study on the polyaddition reaction of biscarbodiimides with chiral diamines, which focuses on a definite case using optically active trans-4a,8a-decahydroquinoxaline and 1,4-phenylenebis(arylcarbodiimide)s, which readily react with each other under ambient and catalyst-free conditions. The specific reactivity allows for facile access to not only the corresponding chiral polyguanidines under balanced stoichiometry but also their oligomeric analogues under imbalanced stoichiometry via a step-by-step procedure. Spectroscopic, chromatographic, and computational characterization of the novel molecular chains containing arrayed guanidines have revealed their structural, optical, and conformational properties as well as the mechanism of polymerization assisted by molecular association. Their potential use as asymmetric catalysts is also described.

Supramolecular copolymers formed by the noncovalent synthesis of multiple components expand the complexity of functional molecular systems. However, varying the composition and microstructure of copolymers through tuning the interactions between building blocks remains a challenge. Here, we report a remarkable discovery of the temperature-dependent supramolecular copolymerization of the two chiral monomers 4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tribenzamide (S-T) and 4,4′,4″-(benzene-1,3,5-triyl)tribenzamide (S-B). We first demonstrate in the homopolymerization of the two individual monomers that a subtle change from the central triazine to benzene in the chemical structure of the monomers significantly affects the properties of the resulting homopolymers in solution. Homopolymers formed by S-T exhibit enhanced stability in comparison to S-B. More importantly, through a combination of spectroscopic analysis and theoretical simulation, we reveal the complex process of copolymerization: S-T aggregates into homopolymers at elevated temperature, and upon slow cooling S-B gradually intercalates into the copolymers, to finally give copolymers with almost 80% alternating bonds at 10 °C. The formation of the predominantly alternating copolymers is plausibly contributed by preferred heterointeractions between triazine and benzene cores in S-T and S-B, respectively, at lower temperatures. Overall, this work unravels the complexity of a supramolecular copolymerization process where an intermediate heterointeraction (higher than one homointeraction and lower than the other homointeraction) presents and proposes a general method to elucidate the microstructures of copolymers responsive to temperature changes.

The reaction of the hexahydride OsH6(PiPr3)2 with a P,Ge,P-germylene-diphosphine affords an osmium tetrahydride derivative bearing a Ge,P-chelate, which arises from the hydrogenolysis of a P–C(sp3) bond. This Os(IV)–Ge(II) compound is a pioneering example of a bifunctional catalyst based on the coordination of a σ-donor acid, which is active in the dehydrogenation of formic acid to H2 and CO2. The kinetics of the dehydrogenation, the characterization of the resting state of the catalysis, and DFT calculations point out that the hydrogen formation (the fast stage) exclusively occurs on the coordination sphere of the basic metal center, whereas both the metal center and the σ-donor Lewis acid cooperatively participate in the CO2 release (the rate-determining step). During the process, the formate group pivots around the germanium to approach its hydrogen atom to the osmium center, which allows its transfer to the metal and the CO2 release., Financial support was provided by the MICINN of Spain (PID2020-115286GB-I00/AEI/10.13039/501100011033, RED2018-102387-T, and PID2019-104652GB-I00), Gobierno de Aragón (E06_20R and LMP148_18), FEDER, and FSE.

The ring opening of 2α,3α- and 2β,3β-epoxy-5α-androstan-17-one with halide reagents (AlCl3, TMSCl, LiCl, and LiBr) was investigated using imidazolium ionic liquids in the dual role of solvent and catalyst. The application of the ionic liquid was shown to result in an increase in the amount of the unusual diequatorial halohydrins especially at temperatures above 100 °C. With a careful choice of reaction conditions, the latter derivatives could be produced with 43–96% selectivity depending on the nature of the halide ion. Moreover, the usual diaxial products could also be isolated in 70–85% yields by a proper change in the reaction conditions. The reusability of the ionic liquid was demonstrated in both types of reactions. The structures of the products were proved unequivocally by nuclear magnetic resonance (NMR) measurements including two-dimensional (2D) techniques as well as high-resolution mass spectrometry (HRMS). Based on quantum chemical calculations, the effect of the ionic liquid could be explained by the stabilization of the transition state leading to the diequatorial product.

Metal-organic gels (MOGs) are attracting increasing attention for removal of organic dyes from aqueous solution and for catalysis of Si-H insertion reactions. Herein, we report that a reaction of porphyrin derivative 1 with Rh2(OAc)4 generates stable metal-organic gels and subsequent subcritical carbon dioxide drying affords metal-organic aerogels. Owing to their micro- and mesoporosity, the aerogels adsorbed dyes. Moreover, aerogel I catalyzed Si-H insertion reactions to give organosilicon compounds in high yields.

Bond exchange via neighboring group-assisted reactions in dynamic covalent networks results in efficient mechanical relaxation. In Nature, the high reactivity of RNA toward nucleophilic substitution is largely attributed to the formation of a cyclic phosphate ester intermediate via neighboring group participation. We took inspiration from RNA to develop a dynamic covalent network based on β-hydroxyl-mediated transesterifications of hydroxyethyl phosphate triesters. A simple one-step synthetic strategy provided a network containing phosphate triesters with a pendant hydroxyethyl group. 31P solid-state NMR demonstrated that a cyclic phosphate triester is an intermediate in transesterification, leading to dissociative network rearrangement. Significant viscous flow at 60-100 °C makes the material suitable for fast processing via extrusion and compression molding.

Molecular mobility is important for interactions of biofunctional polymers with target molecules. Monomer structures for synthetic biofunctional polymers are usually selected based on their compatibility with polymerization systems, whereas the influence of monomer structures on the interaction with target molecules is hardly considered. In this report, we evaluate the correlation between the monomer structures of glycopolymers and their interactions with concanavalin A (ConA) with respect to the molecular mobility. Two types of glycopolymers bearing mannose are synthesized with acrylamide or acrylate monomers. Despite the similar structures, except for amide or ester bonds in the side chains, the acrylate-type glycopolymers exhibit stronger interaction with ConA both in the isothermal titration calorimetry measurement and in a hemagglutination inhibition assay. Characterization of the acrylate-type glycopolymers suggests that the higher binding constant arises from the higher molecular mobility of mannose units, which results from the rotational freedom of ester bonds in their side chains.

Heterogeneous derivatives of catalysts discovered by Ziegler and Natta are important for the industrial production of polyolefin plastics. However, the interaction between precatalysts, alkylaluminum activators, and oxide supports to form catalytically active materials is poorly understood. This is in contrast to homogeneous or model heterogeneous catalysts that contain resolved molecular structures that relate to activity and selectivity in polymerization reactions. This study describes the reactivity of triisobutylaluminum with high surface area aluminum oxide and a zirconocene precatalyst. Triisobutylaluminum reacts with the zirconocene precatalyst to form hydrides and passivates −OH sites on the alumina surface. The combination of passivated alumina and zirconium hydrides formed in this mixture generates ion pairs that polymerize ethylene., A zirconium precatalyst, alkylaluminum, and oxide support interact to form catalytic sites.

In this contribution, we revisit the neglected and forgotten cationic, air-stable, 18-valence electron, heteroleptic sandwich complex (cycloheptatrienyl)(cyclopentadienyl)manganese, which was reported independently by Fischer and by Pauson about 50 years ago. Using advanced high-power LED photochemical synthesis, an expedient rapid access to the parent complex and to functionalized derivatives with alkyl, carboxymethyl, bromo, and amino substituents was developed. A thorough study of these "tromancenium" salts by a range of spectroscopic techniques (1H/13C/55Mn-NMR, IR, UV-vis, HRMS, XRD, XPS, EPR), cyclic voltammetry (CV), and quantum chemical calculations (DFT) shows that these manganese sandwich complexes are unique metallocenes with quite different chemical and physical properties in comparison to those of isoelectronic cobaltocenium salts or (cycloheptatrienyl)(cyclopentadienyl) sandwich complexes of the early transition metals. Electrochemically, all tromancenium ions undergo a chemically partially reversible oxidation and a chemically irreversible reduction at half-wave or peak potentials that respond to the substituents at the Cp deck. As exemplarily shown for the parent tromancenium ion, the product generated during the irreversible reduction process reverts at least partially to the starting material upon reoxidation. Quantum-chemical calculations of the parent tromancenium salt indicate that metal-ligand bonding is distinctly weaker for the cycloheptatrienyl ligand in comparison to that of the cyclopentadienyl ligand. Both the HOMO and the LUMO are metal and cycloheptatrienyl-ligand centered, indicating that chemical reactions will occur either metal-based or at the seven-membered ring, but not on the cyclopentadienyl ligand. published

The synthesis of poly(methyhydrosiloxane) (PMHS) and N,N′-bis(3-allyl)pyromellitic diimide was optimized for O2/N2 separation. The membrane exhibits excellent mechanical and thermal properties and shows an O2/N2 selectivity of up to 4.44 with an O2 permeability of 31.0 Barrer; compared with polydimethylsiloxane (PDMS) and pure polyimide (PI) membranes, the separation selectivity shows a 107% increase for PDMS, and the permeation shows a 660% increase for pure PI. The obtained results were well above the ones reported on the literature for similar conditions opening the door for the preparation of a stable polysiloxane (PMHS-I) gas separation membrane with extraordinary O2/N2 separation performance.

The isolation of a molybdenum(IV) acetylene (C2H2) complex containing two bioinspired 6-methylpyridine-2-thiolate ligands is reported. The synthesis can be performed either by oxidation of a molybdenum(II) C2H2 complex or by substitution of a coordinated PMe3 by C2H2 on a molybdenum(IV) center. Both C2H2 complexes were characterized by spectroscopic means as well as by single-crystal X-ray diffraction. Furthermore, the reactivity of the coordinated C2H2 was investigated with regard to acetylene hydratase, one of two enzymes that accept C2H2 as a substrate. While the reaction with water resulted in the vinylation of the pyridine-2-thiolate ligands, an intermolecular nucleophilic attack on the coordinated C2H2 with the soft nucleophile PMe3 was observed to give a cationic ethenyl complex. A comparison with the tungsten analogues revealed less tightly bound C2H2 in the molybdenum variant, which, however, shows a higher reactivity toward nucleophiles.

The synthesis of a number of tailored architectures of rhodamine dye-norbornene conjugate monomers and corresponding homopolymers derived from them is described. The impact of the monomer architecture on the mechanochromic, photochromic, and thermochromic properties of rhodamine-modified polynorbornenes is reported. Color changes were caused by the reversible interconversion between the "open" and "closed" spirolactam form of the covalently attached dye. Monomers were synthesized in two principle architectures that varied on: (1) the number of polymerizable norbornene groups tethered to a bifunctional rhodamine dye; (2) the presence of flexible methylene spacers between the dye and the polymerizable norbornene groups. Introduction of norbornene groups on each of the two hydroxy groups of a bifunctional rhodamine resulted in a cross-linked polymer that exhibited better mechanochromic, photochromic, and thermochromic properties compared to the corresponding polymer without cross-links, derived from the derivatization of bifunctional rhodamine with only one norbornene. The introduction of flexible methylene spacers between the two polymerizable norbornenes and the dye molecule resulted in a polymeric framework with rapidly reversible color-changing properties upon mechanical or photostimulation. The ideal monomer molecular structure, whereby (1) attaching norbornene on both sides of the rhodamine dye and (2) methylene spacers between the dye and norbornenes on both sides afforded the nonpareil polymer structure that was capable of thermoreversible mechanochromic and photochromic features, and irreversible thermochromic features. These new materials may find utility as multi-stimuli-responsive soft materials.

JACS Au : an open access journal of the American Chemical Society 1(6), 742-749 (2021). doi:10.1021/jacsau.1c00140, Published by ACS Publications, Washington, DC

Manganese complexes have been considered as a cheap and readily available alternative to commonly used precious metal catalysts in C–C bond coupling reactions. Although high-valent Mn aryl intermediates have been proposed in such reactions, a mechanistic understanding of possible organometallic intermediates in Mn-mediated C–C coupling is still lacking due to their high reactivity. We report the synthesis of stable, isolable Mn(III) aryl complexes obtained by oxidative addition of aryl bromide or aryl chloride. These complexes react with a range of organometallic alkylating or arylating reagents (alkyl and aryl Grignard reagents, MeLi, ZnMe2) to undergo C(sp2)–C(sp3) or C(sp2)–C(sp2) bond coupling, and a preliminary catalytic system could be demonstrated. The reagent scope and yield of the C(sp2)–C(sp3) coupled product can further be increased by addition of TEMPO as an oxidant, generating alkyl radicals.

A series of clickable alpha-azide-omega-alkyne ionic liquid (IL) monomers with an ethylene oxide spacer were developed and applied to the synthesis of 1,2,3-triazolium-based poly(ionic liquid)s (TPILs) with high ionic conductivities via one-step thermal azide-alkyne cycloaddition click chemistry. Subsequently, the number of IL moieties in the resultant TPILs was further increased by N-alkylation of the 1,2,3-triazole-based backbones of the TPILs with a quarternizing reagent. This strategy affords the preparation of TPILs having either one or two 1,2,3-triazolium cations with bis(trifluoromethylsulfonyl)imide anions in a monomer unit. Synthesis of the TPILs was confirmed by H-1 and C-13 NMR spectroscopy and gel permeation chromatography. The effects of the length of the ethylene oxide spacer and the number of IL moieties in the IL monomer unit on the physicochemical properties of the TPILs were characterized by differential scanning calorimetry, thermogravimetric analysis, and impedance spectroscopy. The introduction of a longer ethylene oxide spacer or an increase in the number of IL moieties in the monomer unit resulted in TPILs with lower glass-transition temperatures and higher ionic conductivities. The highest ionic conductivity achieved in this study was 2.0 x 10(-5) S cm(-1) at 30 degrees C. These results suggest that the design of the IL monomer provides the resultant polymer with high chain flexibility and a high IL density, and so it is effective for preparing TPILs with high ionic conductivities.

The successful synthesis of poly(aryl cyanurate) nanofiltration membranes via the interfacial polymerization reaction between cyanuric chloride and 1,1,1-tris(4-hydroxyphenyl)ethane (TPE), atop a polyethersulfone ultrafiltration support, is demonstrated. The use of cyanuric chloride allows for the formation of a polymer that does not contain hydrolysis-susceptible amide bonds that inherently limit the stability of polyamide nanofiltration membranes. In order to achieve a thin defect-free cross-linked film via interfacial polymerization, a sufficient number of each monomer should react. However, the reactivities of the second and third chloride groups of the cyanuric chloride are moderate. Here, this difficulty is overcome by the high functionality and the high reactivity of TPE. The membranes demonstrate a typical nanofiltration behavior, with a molecular weight cutoff of 400 ± 83 g·mol-1 and a permeance of 1.77 ± 0.18 L·m-2 h-1 bar-1. The following retention behavior Na2SO4 (97.1%) > MgSO4 (92.8%) > NaCl (51.3%) > MgCl2 (32.1%) indicates that the membranes have a negative surface charge. The absence of amide bonds in the membranes was expected to result in superior pH stability as compared to polyamide membranes. However, it was found that under extremely acidic conditions (pH = 1), the performance showed a pronounced decline over the course of 2 months. Under extremely alkaline conditions (pH = 13), after 1 month, the performance was lost. After 2 months of exposure to moderate alkaline conditions (pH = 12), the MgSO4 retention decreased by 14% and the permeance increased by 2.5-fold. This degradation was attributed to the hydrolysis of the aryl cyanurate bond that behaves like an ester bond.

Katritzky salts have emerged as effective alkyl radical sources upon metal- or photocatalysis. These are typically prepared from the corresponding triarylpyrylium ions, in turn an important class of photocatalysts for small molecules synthesis and photopolymerization. Here, a flow method for the rapid synthesis of both pyrylium and Katrizky salts in a telescoped fashion is reported. Moreover, several pyrylium salts were tested in the photoinduced RAFT polymerization of vinyl ethers under flow and batch conditions.

While the impact of compositional parameters such as block length and ionic content on the micellization of (polymeric) amphiphiles is widely investigated, the influence of monomer sequence has received far less attention until recently. Here, we report the synthesis of two sequence-controlled polyurethane ionomers (PUIs) prepared via a stepwise coupling-deprotection strategy, and compare their solution association in aqueous-organic mixtures. The two PUIs are highly similar in mass and overall composition, yet differ markedly in the sequence of building blocks. PUI-A2 comprises a polytetrahydrofuran (pTHF) block connected to an alternation of isophorone diamine (IPDA) and dimethylolpropionic acid (DMPA) units that together are also arranged in a blockwise manner. The result is a macromolecular structure with a comparatively hydrophobic tail (pTHF) and a hydrophilic headgroup, which structure is reminiscent of those of traditional surfactants, albeit much larger in size. PUI-S2 instead resembles a bolaamphiphilic architecture with a pTHF midblock connected on either end to a singly charged segment comprising DMPA and IPDA. We detect micellization below a threshold cosolvent volume fraction (Csolv) of 0.4 in aqueous-organic mixtures with tetrahydrofuran (THF), ethanol, and isopropyl alcohol. We use scattering tools to compare the aggregation number (Nagg) and hydrodynamic radius (Rh) of PUI-S2 and PUI-A2 micelles. Irrespective of the solvent composition, we observe in the micellar window of Csolv < 0.4, lower Nagg for PUI-S2 micelles compared to PUI-A2, which we attribute to packing restraints associated with its bolaamphiphilic architecture. The increase in micellar size with increasing Csolv is much more pronounced for PUI-S2 than for PUI-A2. The micellar mass decreases with increasing Csolv for both PUIs; the effect is modest for PUI-S2 compared to PUI-A2 and is not observed in the most apolar cosolvent studied (THF). Upon the approach of the micellization boundary Csolv ≈ 0.4, both types of PUI micelles become less compact in structure, as (in most cases) PUIs are released and as micellar dimensions increase.

The metal-free reduction of a range of phosphine(V) oxides employing oxalyl chloride as an activating agent and hexachlorodisilane as reducing reagent has been achieved under mild reaction conditions. The method was successfully applied to the reduction of industrial waste byproduct triphenylphosphine(V) oxide, closing the phosphorus cycle to cleanly regenerate triphenylphosphine(III). Mechanistic studies and quantum chemical calculations support the attack of the dissociated chloride anion of intermediated phosphonium salt at the silicon of the disilane as the rate-limiting step for deprotection. The exquisite purity of the resultant phosphine(III) ligands after the simple removal of volatiles under reduced pressure circumvents laborious purification prior to metalation and has permitted the facile formation of important transition metal catalysts.

Organoselenium compounds with perspective application as Se precursors for atomic layer deposition have been reviewed. The originally limited portfolio of available Se precursors such as H2Se and diethyl(di)selenide has recently been extended by bis trialkylsilyl)selenides, bis(trialkylstannyl)selenides, cyclic selenides, and tetrakis(N,N-dimethyldithiocarbamate)-selenium. Their structural aspects, property tuning, fundamental properties, and preparations are discussed. It turned out that symmetric four- and six-membered cyclic silyl selenides possess well-balanced reactivity/stability, facile and cost-effective synthesis starting from inexpensive and readily available chlorosilanes, improved resistance toward air and moisture, easy handling, sufficient volatility, thermal resistance, and complete gas-to-solid phase exchange reaction with MoCl5, affording MoSe2 nanostructures. These properties make them the most promising Se precursor developed for atomic layer deposition so far. Jsou představeny organoselenové sloučeniny s perspektivními aplikacemi jako selenové prekurzory pro depozice atomárních vrstev. Nabídka dostupných Se prekurzorů byla rozšířena o bis(trialkylsilyl)selenidy, bis(trialkylstannyl)seleniys, cyklické selenidy a tetrakis(N,N-dimethyldithiokarbamate)-selenium. Jsou diskutovány strukturní aspekty, základní vlastnosti, způsoby přípravy a ladění vlastností sloučenin.

A novel diamine (FAPDA) bearing rigid planar fluorene and amide groups was successfully synthesized. Using such diamine and pyromellitic dianhydride (PMDA), a high-barrier polyimide (FAPPI) was obtained. FAPPI exhibits an outstanding gas barrier. Its water vapor transmission rate (WVTR) and oxygen transmission rate (OTR) are as low as 0.51 g·m–2·day–1 and 0.43 cm3·m–2·day–1, respectively. Additionally, FAPPI shows excellent thermal stability with a coefficient of thermal expansion (CTE) of 5.8 ppm·K–1 and a glass transition temperature (Tg) of 416 °C. Molecular simulations, positron annihilation, and X-ray diffraction were utilized to gain insight on the microstructures for the enhanced barrier properties. Introducing fluorene moieties and amide groups improves the regularity and rigidity of molecular chains and increases interchain interaction of PI, resulting in low free volumes and decreased movement capacity of the chain. The low free volumes of FAPPI restrain the gas diffusivity and solubility. Meanwhile, the decreased chain movement reduces the diffusivity of gases. Consequently, barrier performances of FAPPI are improved. The polyimide possesses widespread application in the microelectronics packaging fields.

Both imidazolium and 1,2,4-triazolium cations are important functional moieties widely incorporated as building blocks in poly(ionic liquid)s (PILs). In a classical model, a PIL usually contains either imidazolium or 1,2,4-triazolium in its repeating unit. Herein, via exploiting the slight reactivity difference of alkyl bromide with imidazole and 1,2,4-triazole at room temperature, we synthesized dual-cationic PIL homopolymers carrying both imidazolium and 1,2,4-triazolium moieties in the same repeating unit, that is, an asymmetrically dicationic unit. We investigated their fundamental properties, for example, thermal stability and solubility, as well as their unique function in forming supramolecular porous membranes via a water-initiated phase-separation and cross-linking process. With such knowledge, we identified a water-based fabricate strategy toward air-stable porous membranes from single-component PILs. This study will enrich the design tools and chemical structure library of PILs and expand their application spectrum.

The coupling agent TESPT (bis-[3-(triethoxysilyl)propyl] tetrasulfide) was modified by substituting polyisoprenyl (PI) carbanions for the ethoxyl groups on silicon for increasing the interaction of rubber with its fillers. The modification was carried out by the reaction of TESPT with polyisoprenyllithium, which had been previously prepared by anionic polymerization of isoprene using butyllithium. The success of the substitution was confirmed by Fourier-transform infrared spectroscopy, and the molecular weight of the modified TESPT (PI-TESPT) was determined from gel permeation chromatography measurements. The effects of tethered PI, as well as of its chain length, on the mechanical and dynamic properties of rubber compounds were examined using a universal testing machine and dynamic mechanical analysis (DMA). In rubber sample preparation, the amount of PI3-TESPT (PI of 2900 g/mol) used in rubber compounding is equal to that of the reference sample with TESPT (STESPT). For SPI-TESPT samples, the amounts of PI6-TESPT (PI of 5500 g/mol) and PI14-TESPT (PI of 13,700 g/mol) used were calculated as molar ethoxyl groups which are nearly equivalent to those of PI3-TESPT. At the same wt % (parts per hundred, phr) of elemental sulfur in rubber compounds, despite the order of cross-linking density being STESPT (sample prepared with TESPT) > SPI3-TESPT > SPI6-TESPT > SPI14-TESPT, the exhibited tensile strength is of the order of SPI3-TESPT > SPI6-TESPT > STESPT ≈ SPI14-TESPT. The better mechanical properties of SPI3-TESPT, as opposed to those of STESPT, could be attributed to the extra reinforcement from the PI–rubber chain linkage and better silica dispersion, as suggested by the mixing torque and Payne effect (ΔG′) measurements. While the dynamic properties of SPI3-TESPT are inferior to those of STESPT, these properties can be improved by adding more elemental sulfur to increase the cross-linking density.

Diketopyrrolopyrroles (DPP) have been recognized as a promising acceptor unit for construction of semiconducting donor-acceptor (D-A) polymers, which are typically flanked by spacers such as thiophene rings via a carbon-carbon single bond formation. It may suffer from a decrease in the coplanarity of the molecules especially when bulky side chains are installed. In this work, the two N atoms in the DPP unit are further fused with C-3 of the two flanking thiophene rings, yielding a p-expanded, very planar fused-ring building block (DPPFu). A novel DPPFu-based D-A copolymer (PBDTT-DPPFu) was successfully synthesized, consisting of a benzo[1,2-b:4,5-b]dithiophene (BDTT) unit as a donor and a DPPFu unit as an acceptor. For comparison, the unfused DPP-based counterpart PBDTT-DPP was also synthesized. Two dodecyl alkyl chains were attached to thiophene rings of DPP moieties to ensure good solubility of the DPPFu-based polymer. The influence of the ring-fusion effect on their structure, photophysical properties, electronic properties, molecular packing, and charge transport properties is investigated. Ring-fusion enhances the intermolecular interactions of PBDTT-DPPFu polymer chains as indicated by density functional theory calculation and analysis of electrostatic potential and van der Waals potential and results in significantly improved molecular packing for both the in-plane and out-of-plane directions as suggested by X-ray measurements. Finally, we correlate the molecular packing to the device performance by fabricating field-effect transistors based on these two polymers. The charge carrier mobility of the ring-fused polymer PBDTT-DPPFu is significantly higher as compared to the PBDTT-DPP polymer without ring-fusion, although PBDTT-DPPFu exhibited a much lower number-average molecular weight of 17 kDa as compared to PBDTT-DPP with a molecular weight of 108 kDa. The results from our comparative study provide a robust way to increase the interchain interaction by ring-fusion-promoted coplanarity. Funding Agencies|Swedish Research CouncilSwedish Research CouncilEuropean Commission [2015-04853, 2016-06146, 2019-04683]; Swedish Research Council FormasSwedish Research CouncilSwedish Research Council Formas; NSFCNational Natural Science Foundation of China (NSFC) [21504006, 21534003, 11272093]; Knut and Alice Wallenberg FoundationKnut & Alice Wallenberg Foundation [2017.0186, 2016.0059]; Swedish Foundation for Strategic ResearchSwedish Foundation for Strategic Research; China Scholarship CouncilChina Scholarship Council [201908440047]; Guangzhou Municipal Science and Technology Bureau [201804010501, 201904010381, 202002030362]; Department of Education of Guangdong ProvinceNational Natural Science Foundation of Guangdong Province [2018GKTSCX041, 2017GKQNCX005]; Department of Science and Technology of Guangdong Province [2016A010103046]; Open Fund of the State Key Laboratory of Luminescent Materials and Devices (South China University of Technology) [2020-skllmd-07]; Natural Science Foundation of Hunan ProvinceNatural Science Foundation of Hunan Province [2018JJ3098]; Office of Science, Office of Basic Energy Sciences, of the U.S. Department of EnergyUnited States Department of Energy (DOE) [DE-AC02-05CH11231]

Readily available aryldimethylsulfonium triflates react with zinc powder under nickel catalysis via the selective cleavage of the sp2-hybridized carbon–sulfur bond to produce salt-free arylzinc triflates under mild conditions. This zincation displays superb chemoselectivity and thus represents a protocol that is complementary or orthogonal to existing methods. The generated arylzinc reagents show both high reactivity and chemoselectivity in palladium-catalyzed and copper-mediated cross-coupling reactions.

We have prepared a series of twelve D-isosorbide-2-alkanoate-5-methacrylate monomers as single regioisomers with different pendant linear C2 to C20 alkanoyl chains by using biocatalytic and chemical acylations. By conventional radical polymerization, these monomers afforded high-molecular weight biobased poly(alkanoyl isosorbide methacrylate)s (PAIMAs). Samples with C2-C12 alkanoyl chains were amorphous with glass transition temperatures from 107 to 54 °C, while C14-C20 chains gave semi-crystalline materials with melting points up to 59 °C. Moreover, PAIMAs with C13-C20 chains formed liquid crystalline mesophases with transition temperatures up to 93 °C. The mesophases were studied by polarized optical microscopy, and rheology showed stepwise changes of the viscosity at the transition temperature. Unexpectedly, a PAIMA prepared from a regioisomeric monomer (C18) showed semi-crystallinity but no liquid crystallinity. Consequently, the properties of the PAIMAs were readily tunable by controlling the phase structure and transitions through the alkanoyl chain length and the regiochemistry to form fully amorphous, semi-crystalline or semi-/liquid crystalline materials. (Less)

The one-pot regioselective and catalytic synthesis of bioactive chromones and flavones was achieved via phosphine-free cyclocarbonylative Sonogashira coupling reactions of 2-iodophenols with aryl alkynes, alkyl alkynes, and dialkynes. The reactions are catalyzed by new dibromidobis(NHC)palladium(II) complexes. The new bridged N,N′-substituted benzimidazolium salts (L1, L2, and L3) and their palladium complexes C1, C2, and C3 were designed, prepared, and fully characterized using different physical and spectroscopic techniques. The molecular structures of complexes C1 and C3 were determined by single-crystal X-ray diffraction analysis. They showed a distorted square planar geometry, where the Pd(II) ion is bonded to the carbon atoms of two cis NHC carbene ligands and two cis bromido anions. These complexes displayed a high catalytic activity in cyclocarbonylative Sonogashira coupling reactions with low catalyst loadings. The regioselectivity of these reactions was controlled by using diethylamine as the base and DMF as the solvent.