Search

Microfabricated multiple-channel glass chips were successfully interfaced to an electrospray ionization mass spectrometer (ESI-MS). The microchip device was fabricated by standard photolithographic, wet chemical etching, and thermal bonding procedures. A high voltage was applied individually from each buffer reservoir for spraying sample sequentially from each channel. With the sampling orifice of the MS grounded, it was found that a liquid flow of 100-200 nL/min was necessary to maintain a stable electrospray. The detection limit of the microchip MS experiment for myoglobin was found to be lower than 6 x [10.sup.-8] M. Samples in 75% methanol were successfully analyzed with good sensitivity, as were aqueous samples. The parallel multiple-channel microchip system allowed ESI-MS analysis of different samples of standard peptides and proteins in one chip.

A series of substituted pentacenes including halogenated, phenylated, silylethynylated and thiolated derivatives are described and the structures, HUMO-LUMO energies and associated gaps are calculated. The results have broad implications for the field of organic molecular electronics where OFET, OLED and other applications have benefited from highly persistent, solution processable pentacene derivatives.

This work presents supramolecular coassembled nucleobase copolymers with transitional morphologies upon pH changes (from 7.4 to 10). Uracil- and adenine-containing copolymers were prepared by RAFT, which allowed us to finely tailor the polymerization degree and the composition. The coassembled formulations prepared in an aqueous buffer at two distinct pH (7.4 and 10) formed spherical morphologies at physiological pH. The increase of the pH induced the apparition of various large, irreversible anisotropic supramolecular architectures. Isothermal titration calorimetry revealed that the coassembly at pH 7.4 was mainly guided by H-bonds between complementary nucleobases, while the experiments conducted at pH 10 showed that the assemblies were mainly driven by hydrophobic interactions. These results highlight that the nature of supramolecular interactions (H-bonds or hydrophobic interactions) has a great influence on the morphology of nucleobase-containing coassemblies when changing the pH. These findings may provide further perspectives in the field of advanced nanomaterials.

MALDI mass spectrometry imaging has gained major interest in the field of chemical imaging. This technique makes it possible to locate tens to hundreds of ionic signals on the sample surface without any a priori. One of the current challenges is still the limited ability to annotate signals in order to convert m / z values into probable chemical structures. At the same time, data obtained by LC-MS/MS have benefited from the development of numerous chemoinformatics tools, in particular molecular networks, for their efficient annotation. For the first time, we present here the combination of MALDI-FT-ICR imaging with molecular networks from MALDI-MS/MS data directly acquired on plant tissue sections. Annotation improvements are demonstrated, paving the way for new annotation pipelines for MALDI imaging.

Macroporous hydrogels have great potential for biomedical applications. Liquid or gel-like pores were created in a photopolymerizable hydrogel by forming water-in-water emulsions upon mixing aqueous solutions of gelatin and a poly(ethylene oxide) (PEO)-based triblock copolymer. The copolymer constituted the continuous matrix, which dominated the mechanical properties of the hydrogel once photopolymerized. The gelatin constituted the dispersed phase, which created macropores in the hydrogel. The microstructures of the porous hydrogel were determined by the volume fraction of the gelatin phase. When volume fractions were close to 50 v%, free-standing hydrogels with interpenetrated morphology can be obtained thanks to the addition of a small amount of xanthan. The hydrogels displayed Young's moduli ranging from 5 to 30 kPa. They have been found to be non-swellable and non-degradable in physiological conditions. Preliminary viability tests with hepatic progenitor cells embedded in monophasic PEO-based hydrogels showed rapid mortality of the cells, whereas encouraging viability was observed in PEO-based triblock copolymer/gelatin macroporous hydrogels. The latter has the potential to be used in cell therapy.

Hydrogels are polymeric networks highly swollen with water. Because of their versatility and properties mimicking biological tissues, they are very interesting for biomedical applications. In this aim, the control of porosity is of crucial importance since it governs the transport properties and influences the fate of cells cultured onto or into the hydrogels. Among the techniques allowing for the elaboration of hydrogels, photopolymerization or photo-cross-linking are probably the most powerful and versatile synthetic routes. This Review aims at giving an overview of the literature dealing with photopolymerized hydrogels for which the generation or characterization of porosity is studied. First, the materials (polymers and photoinitiating systems) used for synthesizing hydrogels are presented. The different ways for generating porosity in the photopolymerized hydrogels are explained, and the characterization techniques allowing adequate study of the porosity are presented. Finally, some applications in the field of controlled release and tissue engineering are reviewed.

Janus nanocylinders exhibit nanometric dimensions, a high aspect ratio, and two faces with different chemistries (Janus character), making them potentially relevant for applications in optics, magnetism, catalysis, surface nanopatterning, or interface stabilization, but they are also very difficult to prepare by conventional strategies. In the present work, Janus nanocylinders were prepared by supramolecular coassembly in water of two different polymers functionalized with complementary assembling units. The originality of our approach consists in combining charge transfer complexation between electron-rich and electron-poor units with hydrogen bonding to (1) drive the supramolecular formation of one-dimensional structures (cylinders), (2) force the two polymer arms on opposite sides of the cylinders independently of their compatibility, resulting in Janus nanoparticles, and (3) detect coassembly through a color change of the solution upon mixing of the functional polymers.

Exposure of male fish to estrogenic substances from wastewater treatment works (WwTWs) results in feminization and reduced reproductive fitness. Nevertheless, self-sustaining populations of roach ( Rutilus rutilus ) inhabit river stretches polluted with estrogenic WwTW effluents. In this study, we examine whether such roach populations have evolved adaptations to tolerate estrogenic pollution by comparing frequency differences in single-nucleotide polymorphisms (SNPs) between populations sampled from rivers receiving either high- or low-level WwTW discharges. SNPs within 36 "candidate" genes, selected for their involvement in estrogenic responses, and 120 SNPs in reference genes were genotyped in 465 roaches. There was no evidence for selection in highly estrogen-dependent candidate genes, including those for the estrogen receptors, aromatases, and vitellogenins. The androgen receptor ( ar ) and cytochrome P450 1A genes were associated with large shifts in allele frequencies between catchments and in individual populations, but there is no clear link to estrogen pollution. Selection at ar in the effluent-dominated River Lee may have resulted from historical contamination with endocrine-disrupting pesticides. Critically, although our results suggest population-specific selection including at genes related to endocrine disruption, there was no strong evidence that the selection resulted from exposure to estrogen pollution.

Cloud droplets contain dynamic and complex pools of highly heterogeneous organic matter, resulting from the dissolution of both water-soluble organic carbon in atmospheric aerosol particles and gas-phase soluble species, and are constantly impacted by chemical, photochemical, and biological transformations. Cloud samples from two summer events, characterized by different air masses and physicochemical properties, were collected at the Puy de Dôme station in France, concentrated on a strata-X solid-phase extraction cartridge and directly infused using electrospray ionization in the negative mode coupled with ultrahigh-resolution mass spectrometry. A significantly higher number (n = 5258) of monoisotopic molecular formulas, assigned to CHO, CHNO, CHSO, and CHNSO, were identified in the cloud sample whose air mass had passed over the highly urbanized Paris region (J1) compared to the cloud sample whose air mass had passed over remote areas (n = 2896; J2). Van Krevelen diagrams revealed that lignins/CRAM-like, aliphatics/proteins-like, and lipids-like compounds were the most abundant classes in both samples. Comparison of our results with previously published data sets on atmospheric aqueous media indicated that the average O/C ratios reported in this work (0.37) are similar to those reported for fog water and for biogenic aerosols but are lower than the values measured for aerosols sampled in the atmosphere and for aerosols produced artificially in environmental chambers.

Homogeneous hydrogels were formed by self-assembly of triblock copolymers via association of small hydrophobic end blocks into micelles bridged by large poly(ethylene oxide) central blocks. A fraction of the end blocks were photo-cross-linkable and could be rapidly cross-linked covalently by in situ UV irradiation. In this manner networks were formed with well-defined chain lengths between homogeneously distributed hybrid micelles that contained both permanent and dynamically cross-linked end blocks. Linear rheology showed a single relaxation mode before in situ irradiation intermediate between those of the individual networks. The presence of transient cross-links decreased the percolation threshold of the network rendered permanent by irradiation and caused a strong increase of the elastic modulus at lower polymer concentrations. Large amplitude oscillation and tensile tests showed significant increase of the fracture strain caused by the dynamic cross-links.

In an attempt to design urea-based Janus nanocylinders through a supramolecular approach, nonsymmetrical bis(urea)s and tris(urea)s decorated by two incompatible polymer arms, namely, poly(styrene) (PS) and poly(isobutylene) (PIB), were synthesized using rather straightforward organic and polymer chemistry techniques. Light scattering experiments revealed that these molecules self-assembled in cyclohexane by cooperative hydrogen bonds. The extent of self-assembly was limited for the bis(urea)s. On the contrary, reasonably anisotropic 1D structures (small nanocylinders) could be obtained with the tris(urea)s (Nagg ∼ 50) which developed six cooperative hydrogen bonds per molecule. (1)H transverse relaxation measurements and NOESY NMR experiments in cyclohexane revealed that perfect Janus nanocylinders with one face consisting of only PS and the other of PIB were not obtained. Nevertheless, phase segregation between the PS and PIB chains occurred to a large extent, resulting in patchy cylinders containing well separated domains of PIB and PS chains. Reasons for this behavior were proposed, paving the way to improve the proposed strategy toward true urea-based supramolecular Janus nanocylinders.

Exposure to environmental estrogens in wastewater treatment works (WwTW) effluents induces feminized responses in male fish, including the development of eggs in male testes. However, the impacts on the offspring of exposed fish are not well understood. In this study, we examined whether roach (Rutilus rutilus) from mothers that had been exposed to an undiluted WwTW effluent from early life to sexual maturity had altered susceptibility to gonadal feminization and an impaired capacity to reproduce. For males from both WwTW effluent exposed mothers and dilution water exposed mothers, effluent exposure for up to 3 years and 9 months induced feminized male gonads, although the intersex condition was relatively mild. There was no difference in the severity of gonadal feminization in roach derived from either WwTW effluent exposed or dilution water exposed mothers. Furthermore, a breeding study revealed that roach with effluent-exposed mothers reproduced with an equal success as roach with mothers exposed to clean water. Roach exposed to the effluent for 3 years in this study were able to reproduce successfully. Our findings provide no evidence for impacts of WwTW effluent exposure on reproduction or gonadal disruption in roach down the female germ line and add to existing evidence that male roach with a mild intersex condition are able to breed competitively.

For the first time, polymersomes were obtained by self-assembly in water of amphiphilic grafted glycopolymers based on dextran polysaccharidic backbone and polymeric liquid crystal grafts (poly(diethylene glycol cholesteryl ether acrylate), PDEGCholA). After measuring the properties of these glycopolymers in term of surfactancy, the influence of their structural parameters on their self-assemblies once dispersed in water was investigated by static and dynamic light scattering and by cryogenic transmission electron microscopy (cryo-TEM). Based on the results, a proper design of Dex-g N -PDEGCholA F leads to hollow vesicular structure formulation known as polymersome.

Gas-phase ions of protonated l-glutathione as native species, [GSH + H](+), and S-nitroso derivative, [GSNO + H](+), have been generated by electrospray ionization and probed via infrared multiple photon dissociation (IRMPD) action spectroscopy. Insight into the conformational landscape is gained from interpretation of the IR spectra aided by high-level theoretical calculations, which enables structural assignment disclosing both the site of protonation and the intramolecular hydrogen-bond network. Calculations yield the low-energy structures of [GSNO + H](+). A admixture of the four most stable ones (SN1, AN1, SN2, and AN2) is apt to account for the experimental IRMPD spectra obtained in both the 1000-2000 and the 3100-3700 cm(-1) spectral ranges. The most stable form of [GSNO + H](+), SN1, protonated at the amino group, presents a syn conformation at the S-N (partial) double bond and all peptidic carbonyls involved in (strong) C═O···H-N hydrogen bonds, so allowing closure of a C5 (β-strand), two C7 (γ-turn), and one C9-membered rings. An appreciable barrier to rotation of 43 kJ mol(-1) about the S-N bond is found to separate SN1 from the analogous anti isomer AN1, which lies only 0.70 kJ mol(-1) higher in free energy. Conformers obtained for [GSH + H](+) are very similar to the [GSNO + H](+) counterparts, indicating that the S-nitrosation motif does not affect significantly the geometry of the peptide. The observed ν(NO) signatures at 1622 and 1690 cm(-1), merged with other absorptions, are revealed by their sensitivity to (15)NO isotope labeling and by comparison with the IRMPD spectrum of native [GSH + H](+), providing a diagnostic probe for the S-nitrosation feature in natural peptides.

Star polymers with dynamic arm exchange are formed in water by self-assembly of amphiphilic diblock copolymers based on poly(ethylene oxide) end capped with a small hydrophobic block. The arm exchange was arrested in situ by photo-cross-linking of the core. The effect of dynamic arm exchange on the osmotic compressibility and viscosity was investigated systematically as a function of the concentration and temperature. The discontinuous liquid-solid transition reported for dense polymeric micelle suspensions was found to be preserved after dynamic arm exchange was arrested in situ. The effect of cross-linking and aggregation number on the liquid-solid transition was investigated.

Steroid estrogens are thought to be the major cause of feminization (intersex) in wild fish. Widely used wastewater treatment technologies are not effective at removing these contaminants to concentrations thought to be required to protect aquatic wildlife. A number of advanced treatment processes have been proposed to reduce the concentrations of estrogens entering the environment. Before investment is made in such processes, it is imperative that we compare their efficacy in terms of removal of steroid estrogens and their feminizing effects with other treatment options. This study assessed both steroid removal and intersex induction in adult and early life stage fish (roach, Rutilus rutilus). Roach were exposed directly to either secondary (activated sludge process (ASP)), tertiary (sand filtrated (SF)), or advanced (chlorine dioxide (ClO(2)), granular activated charcoal (GAC)) treated effluents for six months. Surprisingly, both the advanced GAC and tertiary SF treatments (but not the ClO(2) treatment) significantly removed the intersex induction associated with the ASP effluent; this was not predicted by the steroid estrogen measurements, which were higher in the tertiary SF than either the GAC or the ClO(2). Therefore our study highlights the importance of using both biological and chemical analysis when assessing new treatment technologies.

Studies of peptide fragment ion structures are important to aid in the accurate kinetic modeling and prediction of peptide fragmentation pathways for a given sequence. Peptide b(2)(+) ion structures have been of recent interest. While previously studied b(2)(+) ions that contain only aliphatic or simple aromatic residues are oxazolone structures, the HA b(2)(+) ion consists of both oxazolone and diketopiperazine structures. The structures of a series of histidine-analogue-containing Xxx-Ala b(2)(+) ions were studied by using action infrared multiphoton dissociation (IRMPD) spectroscopy, fragment ion hydrogen-deuterium exchange (HDX), and density functional theory (DFT) calculations to systematically probe the influence of different side chain structural elements on the resulting b(2)(+) ion structures formed. The b(2)(+) ions studied include His-Ala (HA), methylated histidine analogues, including π-methyl-HA and τ-methyl-HA, pyridylalanine (pa) analogues, including 2-(pa)A, 3-(pa)A, and 4-(pa)A, and linear analogues, including diaminobutanoic acid-Ala (DabA) and Lys-Ala (KA). The location and accessibility of the histidine π-nitrogen, or an amino nitrogen on an aliphatic side chain, were seen to be essential for diketopiperazine formation in addition to the more typical oxazolone structure formation, while blocking or removal of the τ-nitrogen did not change the b(2)(+) ion structures formed. Linear histidine analogues, DabA and KA, formed only diketopiperazine structures, suggesting that a steric interaction in the HisAla case may interfere with the complete trans-cis isomerization of the first amide bond that is necessary for diketopiperazine formation.

Infrared multiphoton dissociation (IRMPD) spectroscopy, using a free-electron laser, and ion mobility measurements, using both drift-cell and traveling-wave instruments, were used to investigate the structure of gas-phase peptide (AAHAL + 2H)(2+) ions produced by electrospray ionization. The experimental data from the IRMPD spectra and collisional cross section (Ω) measurements were consistent with the respective infrared spectra and Ω calculated for the lowest-energy peptide ion conformer obtained by extensive molecular dynamics searches and combined density functional theory and ab initio geometry optimizations and energy calculations. Traveling-wave ion mobility measurements were employed to obtain the Ω of charge-reduced peptide cation-radicals, (AAHAL + 2H)(+●), and the c(3), c(4), z(3), and z(4) fragments from electron-transfer dissociation (ETD) of (AAHAL + 2H)(2+). The experimental Ω for the ETD charge-reduced and fragment ions were consistent with the values calculated for fully optimized ion structures and indicated that the ions retained specific hydrogen bonding motifs from the precursor ion. In particular, the Ω for the doubly protonated ions and charge-reduced cation-radicals were nearly identical, indicating negligible unfolding and small secondary structure changes upon electron transfer. The experimental Ω for the (AAHAL + 2H)(+●) cation-radicals were compatible with both zwitterionic and histidine radical structures formed by electron attachment to different sites in the precursor ion, but did not allow their distinction. The best agreement with the experimental Ω was found for ion structures fully optimized with M06-2X/6-31+G(d,p) and using both projection approximation and trajectory methods to calculate the theoretical Ω values., (© 2012 American Chemical Society)

Poly(ethylene oxide) (PEO) end-capped with a hexadecyl group at one (alpha-PEO) or both ends (alpha,omega-PEO) are highly asymmetric diblock or triblock copolymers that form spherical micelles in aqueous solution. alpha,omega-PEO can bridge between two micelles leading to reversible association of the micelles. At a first critical concentration (C(p)), the micelles percolate and a transient network is formed with an elastic modulus determined by the concentration of alpha,omega-PEO. C(p) increases with increasing fraction of alpha-PEO and is insensitive to the temperature. At a second critical concentration (C(c)), a liquid-solid transition occurs. C(c) is independent of the fraction of alpha-PEO and increases with increasing temperature. There are indications that the solid state is formed by nucleation and growth of domains of dynamically arrested micelles. The properties of the transient network are almost the same in the liquid and in the solid state.

Poly(ethylene oxide) (PEO) end capped with an alkyl group is a highly asymmetric diblock copolymer that forms spherical micelles in aqueous solution resembling multiarm star polymers. The effect of varying the length of the alkyl end group on the structure and viscoelasticity was investigated for pure and mixed micelle suspensions. The aggregation number (p) of the micelles increased and the critical association concentration (CAC) decreased with increasing the length of the end group. At high concentrations a discontinuous reversible liquid-solid transition was observed below a critical temperature (Tc) that increased with increasing length of the end group. Mixing end-capped PEO with different alkyl lengths led first to formation of the micelles by polymers with the lowest CAC into which the other polymers were incorporated when the concentration was increased. The viscoelastic properties at high concentrations are the same for pure systems and mixtures with the same average length of the alkyl end group.