Search

Monolithic silica capillary columns for HPLC were prepared from tetramethoxysilane to have smaller sized domains and increased phase ratios as compared to previous materials, and their performance was evaluated. The monolithic silica columns possessed an external porosity of 0.65-0.76 and a total porosity of 0.92-0.95 and showed considerably higher performance and greater retention factors in a reversed-phase mode after chemical modification than columns previously reported. An octadecyisilylated monolithic silica column with the smallest domain size (through-pores of ~1.3 [micro]m and silica skeletons of ~0.9 [micro]m) showed a plate height of less than 5 [micro]m at optimum linear velocities (u) of 2-3 mm/s in 80% acetonitrile for a solute having retention factors of ~1, and ~7 [micro]m at u = 8 mm/s. With a permeability similar to that of a column packed with 5-[micro]m particles, the monolithic silica columns were able to attain column efficiencies comparable to that of particulate columns packed with 2-2.5-[micro]m particles, and showed performance in the 'forbidden region' for the previous columns. The performance of the monolithic column can be compared favorably with that of a particle-packed column when 15 000-30 000 or more theoretical plates are desired at a pressure drop of 20-40 MPa or lower. The increased homogeneity of the co-continuous structures, in addition to the small-sized domains, contributed to the higher performance as compared to previous monolithic silica columns.

This paper describes the use of computational fluid dynamics for the calculation of the flow resistance through computer-generated models resembling silica monoliths. This study was undertaken to determine the effect of skeleton heterogeneity on the flow resistance and, more precisely, to test the hypothesis that increased skeleton heterogeneity decreases the flow resistance. To evaluate the proposed model, 24 real silica monoliths have been prepared using the same method, covering a wide range of skeleton sizes (2.2 [micro]m < [d.sub.s] < 8 [micro]m) and porosities (0.47 < [epsilon] < 0.66). The permeability of these monoliths was determined by pressure drop measurements, and structural information was obtained by image analysis of laser scanning confocal microscopy-generated 3D images of the skeleton structure. The results indicate that the presence of preferential flow paths due to an increased heterogeneity of the flow through pore space reduces the flow resistance of monolithic media. It is also shown that the pore size is hence a much better suited scaling dimension than the skeleton size to reduce the permeability of monolithic columns.

Phase-separation behavior in the sol-gel system of alumina-silica in the presence of poly(ethylene oxide) is investigated. The reduction of Sm(super 3+) to Sm(super 2+) is accomplished in Al2O3-SiO2 macroporous glasses by heat treatment in a reducing atmosphere.

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 em long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated ([C.sub.18]) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/ min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4 0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase ([C.sub.18]) or different phases, [C.sub.18] and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of ~1000 in ~60 min in cases 1 and 2 and in ~30 min in case 3. The three stationary phases, FR, [C.sub.18], and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.

Application of C 18 monolithic silica capillary columns in HPLC coupled to ion trap mass spectrometry detection was studied for probing the metabolome of the model plant Arabidopsis thaliana. It could be shown that the use of a long capillary column is an easy and effective approach to reduce ionization suppression by enhanced chromatographic resolution. Several hundred peaks could be detected using a 90-cm capillary column for LC separation and a noise reduction and automatic peak alignment software, which outperformed manual inspection or commercially available mass spectral deconvolution software.

A continuous macroporous silica gel network was prepared in a fused-silica capillary and evaluated in reversed-phase liquid chromatography. Under pressure-driven conditions, the monolithic silica column derivatized to C(sub 18) phase (100 (mu)m in diameter, 25 cm in length, silica skeleton size of approximately 2.2 (mu)m) produced plate heights of about 23 and 81 (mu)m at 0.5 mm/s with a pressure drop of 0.4 kg/cm(super 2), and at 4.0 mm/s with 3.6 kg/cm(super 2), respectively, in 90% acetonitrile for hexylbenzene with a k value of 0.7. The separation impedance, E, calculated for the present monolithic silica column was much smaller at a low flow rate than those for particle-packed columns, although higher E values were obtained at a higher flow rate. Considerable dependence of column efficiency on the linear velocity of the mobile phase was observed despite the small size of the silica skeletons. A major source of band broadening in the HPLC mode was found in the A term of the van Deemter equation. The performance of the continuous silica capillary column in the electrodriven mode was much better than that in the pressure-driven mode. Plate heights of 7-8 (mu)m were obtained for alkylbenzenes at 0.7-1.3 mm/s, although the electroosmotic flow was slow. In HPLC and CEC mode, the dependency of plate height on k values of the solutes was observed as seen in open tube chromatography presumably due to the contribution of the large through-pores. Since monolithic silica capillary columns can provide high permeability, the pressure-driven operation at a very low pressure can afford a separation speed similar to CEC at a high electric field.

Aerogels have many unique properties such as low density and low thermal conductivity, and, in particular, transparent silica aerogels are attractive for thermal insulating windows. Practical applications of silica aerogels, however, have been limited because of their low mechanical strength, and it is still challenging to synthesize transparent and mechanically strong aerogels. Here, we report colorless transparent melamine–formaldehyde (MF) aerogels prepared via a nonaqueous synthetic strategy. The obtained transparent MF aerogel with a density of 0.18 g cm–3 shows significantly higher mechanical strength and a lower thermal conductivity of ca. 13 mW m–1 K–1 compared to conventional silica aerogels with similar density. [ABSTRACT FROM AUTHOR]

The porous materials designed by a sol-gel process accompanied by phase separation are reviewed using polysiloxane systems as major examples. Their application to monolithic high-performance liquid chromatography columns is described.

Various iron-based polycrystalline monoliths, Fe3O4, iron, and Fe3C, with hierarchicallydistributedpores have been synthesized from ionic precursors using a sol–gelprocess accompanied by phase separation. Propylene oxide acts as aproton scavenger to increase pH moderately and uniformly in a reactionsolution, which leads to homogeneous gelation. On the other hand,poly(acrylamide) works as a phase separation inducer as well as aprecipitation inhibitor. Appropriate choice of iron precursor, solvent,polymer, and epoxide allowed the formation of iron(III)-based xerogelswith cocontinuous macroporous structures. The dried gels were amorphous,whereas heating in air above 300 °C led to the formation of α-Fe2O3. Calcination under an inert condition above400 °C formed Fe3O4, iron, and Fe3C without collapse of macrostructures. Examination has been carriedout using SEM, TG-DTA, FT-IR, Hg intrusion, pH measurement, X-raydiffraction, and N2adsorption–desorption. [ABSTRACT FROM AUTHOR]

Focuses on the structural and chromatographic features of monolithic columns consisting of one piece of an organic polymer or silica with flow-through pores. Limits of particle-packed columns; High-performance chromatographic systems; Types of monolithic columns; Polymer gel columns.

Internal spacing of electrodes is a key point for controlling electron-transfer (ET)-related phenomena. However, their disordered porous structures often prevent the observation of microscopic effects. It hampers the development of modern electrochemical theories. The development of model porous electrodes therefore provides an ideal platform to discover intriguing fundamental principles of electrode processes. We developed a new synthetic strategy for all-oxide monolithic ruthenium dioxide (RuO 2 )/antimony-doped tin oxide (ATO) electrodes with a controlled hierarchically porous structure and oxide-oxide heterojunction. The use of the obtained RuO 2 /ATO electrodes as model electrodes suppressed influences related to different mass diffusion efficiencies between electrodes with heterojunctions of different types. Then, we showed unconventional oxide-oxide heterojunction effects, improving reversible Li + -coupled electron-transfer properties using model electrodes constituted of various nanostructured (nano-) RuO 2 on porous ATO. In addition to the superior electrochemical properties of the nano-RuO 2 /ATO heterojunction, the quasi-two-dimensional (2D) RuO 2 /ATO heterojunction led to improved specific capacity at a high rate and longer cycle life. We anticipate that this oxide-oxide heterojunction effect and developed all-oxide model porous electrodes can provide a path to develop advanced reversible energy storage devices.

Meridional tridentate N-heterocyclic carbene (NHC)-based pincer ligands contribute to a substantial growth in modern organometallic chemistry in both homogeneous catalysis and luminescence materials. Among all NHC-based pincer ligands, the dianionic LX 2 -type CCC-pincer ones constitute the smallest subcategory owing to their limited ligand frameworks suitable for complexation. This work reports a one-pot, high-yield synthesis of a homoleptic anionic all-carbon bis-pincer iridium(III) complex ( 4 ) directly from a bis(aryl)-substituted dipyrido-annulated (dpa Ar2 ) imidazolium salt and [Ir(COD)Cl] 2 via a cascade of deprotonation/C-H activation processes. Both experimental complexation chemistry and computational mechanistic investigation suggest that the large bite angle and π-rich character of the dpa Ar2 NHC are responsible for its facile complexation as a dianionic LX 2 -type CCC-pincer ligand precursor. The all-carbon ligated iridium(III) complex ( 4 ) bearing a π-conjugated ligand scaffold showed remarkably low oxidation potentials, which allows future investigations in its redox chemistry and photophysical properties.

Free-standing electrodes, which are free from additives (binders and conductive agents) and even current collectors, are useful in terms of both application research and fundamental study. Here, we demonstrate the preparation of binder-free monolithic carbon electrodes embracing Si nanoparticles in their well-defined porous scaffolds via the one-pot sol-gel reaction followed by carbonization. The free-standing electrodes with a thickness of 150 μm work out as a high-areal-density anode for Li-ion batteries, delivering up to ca. 7 mA h cm -2 . As the Si content increases, the capacity decay on cycling becomes pronounced, which is likely to associate with the fracturing and pulverization of Si nanoparticles even with the size smaller than 100 nm after long-term cycles. The thermogravimetry-mass spectrometry profile of the cycled electrode corroborates the successive electrolyte decomposition to grow solid electrolyte interphase (SEI) mainly composed of lithium alkylcarbonates, polymeric species, and LiF, rendering the electrode mass nearly double of its original state after 200 cycles. The elemental mapping analysis reveals that LiF is generated inhomogeneously in the monolithic electrodes unlike the other SEI components, resulting in the concentration gradient depending on the distance from a Li counter electrode.

Aerogels have many attractive properties but are usually costly and mechanically brittle, which always limit their practical applications. While many efforts have been made to reinforce the aerogels, most of the reinforcement efforts sacrifice the transparency or superinsulating properties. Here we report superflexible polyvinylpolymethylsiloxane, (CH 2 CH(Si(CH 3 )O 2/2 )) n , aerogels that are facilely prepared from a single precursor vinylmethyldimethoxysilane or vinylmethyldiethoxysilane without organic cross-linkers. The method is based on consecutive processes involving radical polymerization and hydrolytic polycondensation, followed by ultralow-cost, highly scalable, ambient-pressure drying directly from alcohol as a drying medium without any modification or additional solvent exchange. The resulting aerogels and xerogels show a homogeneous, tunable, highly porous, doubly cross-linked nanostructure with the elastic polymethylsiloxane network cross-linked with flexible hydrocarbon chains. An outstanding combination of ultralow cost, high scalability, uniform pore size, high surface area, high transparency, high hydrophobicity, excellent machinability, superflexibility in compression, superflexibility in bending, and superinsulating properties has been achieved in a single aerogel or xerogel. This study represents a significant progress of porous materials and makes the practical applications of transparent flexible aerogel-based superinsulators realistic.

Reactions of chloromethyltrimethoxysilane (CMTMS) and its derived colloidal network polychloromethylsilsesquioxane (PCMSQ) have been investigated to extend the material design strategy toward functionalized and mechanically reinforced aerogels. In a carefully designed sol-gel system, CMTMS has afforded transparent aerogels in the presence of cationic surfactant. The surface chloromethyl groups with polarity and reactivity are shown to be useful for supporting nanostructures, with photoluminescent carbon dots (C-dots) prepared from polyethylenimine and citric acid as an example. Furthermore, since nucleophilic substitution (S N 2) reactions on the surface chloromethyl groups are found to control the equilibrium of formation/dissociation of siloxane bonds, a new gelation strategy triggered by S N 2 reactions in sol-gel has been developed. In the presence of nucleophilic organic species such as polyamines, a hybrid network consisting of PCMSQ cross-linked with a polyamine nucleophile can be prepared to enhance mechanical properties of aerogel.

Room-temperature stable macroporous mayenite electride (C12A7:e - ) has been successfully prepared via a sol-gel method accompanied by phase separation, followed by heat-treatment and reduction processes. The obtained xerogel monoliths possess controllable macrostructure and a porosity of more than 60%, depending on adjusting the amount of poly(ethylene oxide) as a phase separation inducer. Heat-treatment allows the formation of multicrystals Ca 12 Al 14 O 32 Cl 2 and Ca 12 Al 14 O 33 (C12A7), and the porosity increases to 78.67% after being heat-treated at 1100 °C. Further reduction promotes the transformation from Ca 12 Al 14 O 32 Cl 2 or C12A7 to C12A7:e - as well as the conversion from an insulator to a semiconductive electride. The carrier concentration of the electride reaches 3.029 × 10 18 cm -3 after being reduced at 1100 °C under Ar atmosphere, and the porosity still remains 66%. The macrostructure of the resultant mayenite electride before and after heat-treatment and reduction is perfectly preserved, indicating that the obtained macroporous monolithic mayenite electride could be utilized in the electronic components., Competing Interests: The authors declare no competing financial interest.

Transparent, low-density ethenylene-bridged polymethylsiloxane [Ethe-BPMS, O 2/2 (CH 3 )Si-CH═CH-Si(CH 3 )O 2/2 ] aerogels from 1,2-bis(methyldiethoxysilyl)ethene have successfully been synthesized via a sol-gel process. A two-step sol-gel process composed of hydrolysis under acidic conditions and polycondensation under basic conditions in a liquid surfactant produces a homogeneous pore structure based on cross-linked nanosized colloidal particles. Visible-light transmittance of the aerogels varies with the concentration of the base catalyst and reaches as high as 87% (at a wavelength of 550 nm for a 10 mm thick sample). Gelation and aging temperature strongly affect the deformation behavior of the resultant aerogels against uniaxial compression, and the obtained aerogels prepared at 80 °C show high elasticity after being unloaded. This highly resilient behavior is primarily derived from the rigidity of ethenylene groups, which is confirmed by a comparison with other aerogels with similar molecular structures, ethylene-bridged polymethylsiloxane and polymethylsilsesquioxane. Applicability of the addition reaction using a Diels-Alder reaction of benzocyclobutene has also been investigated, revealing that a successful addition takes place on the ethenylene linkings, which is verified using Raman and solid-state NMR spectroscopies. Insights into the effect of molecular structure on mechanical properties and the availability of surface functionalization provided in this study are important for realizing transparent aerogels with the desired functionality.

Multifunctional catalysts are of great interest in catalysis because their multiple types of catalytic or functional groups can cooperatively promote catalytic transformations better than their constituents do individually. Herein we report a new synthetic route involving the surface functionalization of nanoporous silica with a rationally designed and synthesized dihydrosilane (3-aminopropylmethylsilane) that leads to the introduction of catalytically active grafted organoamine as well as single metal atoms and ultrasmall Pd or Ag-doped Pd nanoparticles via on-site reduction of metal ions. The resulting nanomaterials serve as highly effective bifunctional dehydrogenative catalysts for generation of H 2 from formic acid.

Polymethylhydrosiloxane has been grafted on the surface of a hierarchically porous silica monolith using a facile catalytic reaction between Si-H and silanol to anchor the polymer. This easy methodology leads to the functionalization of the surface of a silica monolith, where a large amount of free Si-H bonds remain available for reducing metal ions in solution. Palladium nanoparticles of 15 nm have been synthesized homogeneously inside the mesopores of the monolith without any stabilizers, using a flow of a solution containing Pd 2+ . This monolith was used as column-type fixed bed catalyst for continuous flow hydrogenation of styrene and selective hydrogenation of 3-hexyn-1-ol, in each case without a significant decrease of the catalytic activity after several hours or days. Conversion, selectivity, and stereoselectivity of the alkyne hydrogenation can be tuned by flow rates of hydrogen and the substrate solution, leading to high productivity (1.57 mol g(Pd) -1 h -1 ) of the corresponding cis-alkene.

Transparent, monolithic aerogels with nanosized colloidal skeletons have been obtained from a single precursor of 1,2-bis(methyldiethoxysilyl)ethane (BMDEE) by adopting a liquid surfactant and a two-step process involving strong-acid, followed by strong-base, sol-gel reactions. This precursor BMDEE forms the ethylene-bridged polymethylsiloxane (EBPMS, O 2/2 (CH 3 )Si-CH 2 CH 2 -Si(CH 3 )O 2/2 ) network, in which each silicon has one methyl, two bridging oxygens, and one bridging ethylene, exhibiting an analogous structure to that of the previously reported polymethylsilsesquioxane (PMSQ, CH 3 SiO 3/2 ) aerogels having one methyl and three bridging oxygen atoms. Obtained aerogels consist of fine colloidal skeletons and show high visible-light transparency and a flexible deformation behavior against compression without collapse. Similar to the PMSQ aerogels, a careful tuning of synthetic conditions can produce low-density (0.19 g cm -3 ) and highly transparent (76% at 550 nm, corresponding to 10 mm thick samples) xerogels via ambient pressure drying by solvent evaporation due to their high strength and resilience against compression. Moreover, EBPMS aerogels exhibit higher bending strength and bending strain at break against the three-point bending mode compared to PMSQ aerogels. This improved bendability is presumably derived from the introduced ethylene-bridging parts, suggesting the potential for realizing transparent and bendable aerogels in such polysiloxane materials with organic linking units.

A preceramic polymer route from Ti-based inorganic-organic hybrid networks provides electroconductive N-doped reduced titanium oxides (TinO2n-1) and titanium oxynitrides (TiOxNy) with a monolithic shape as well as well-defined porous structures. This methodology demonstrates an advantageously lower temperature of the crystal phase transition compared to the reduction of TiO2 by carbon or hydrogen. In this study, the effect of calcination conditions on various features of the products has been explored by adopting three different atmospheric conditions and varying the calcination temperature. The detailed crystallographic and elemental analyses disclose the distinguished difference in the phase transition behavior with respect to the calcination atmosphere. The correlation between the crystallization and nitridation behaviors, porous properties, and electric conductivities in the final products is discussed.

Inspired by homogeneous borane catalysts that promote Si-H bond activation, we herein describe an innovative method for surface modification of silica using hydrosilanes as the modification precursor and tris(pentafluorophenyl)borane (B(C6F5)3) as the catalyst. Since the surface modification reaction between surface silanol and hydrosilane is dehydrogenative, progress and termination of the reaction can easily be confirmed by the naked eye. This new metal-free process can be performed at room temperature and requires less than 5 min to complete. Hydrosilanes bearing a range of functional groups, including alcohols and carboxylic acids, have been immobilized by this method. An excellent preservation of delicate functional groups, which are otherwise decomposed in other methods, makes this methodology appealing for versatile applications.

Polymethylsilsesquioxane-cellulose nanofiber (PMSQ-CNF) composite aerogels have been prepared through sol-gel in a solvent containing a small amount of CNFs as suspension. Since these composite aerogels do not show excessive aggregation of PMSQ and CNF, the original PMSQ networks are not disturbed. Composite aerogels with low density (0.020 g cm(-3) at lowest), low thermal conductivity (15 mW m(-1) K(-1)), visible light translucency, bending flexibility, and superhydrophobicity thus have been successfully obtained. In particular, the lowest density and bending flexibility have been achieved with the aid of the physical supporting effect of CNFs, and the lowest thermal conductivity is comparable with the original PMSQ aerogels and standard silica aerogels. The PMSQ-CNF composite aerogels would be a candidate to practical high-performance thermal insulating materials.

Synthesis of class II hybrid silica materials requires the formation of covalent linkage between organic moieties and inorganic frameworks. The requirement that organosilylating agents be present to provide the organic part limits the synthesis of functional inorganic oxides, however, due to the water sensitivity and challenges concerning purification of the silylating agents. Synthesis of hybrid materials with stable molecules such as simple alcohols, rather than with these difficult silylating agents, may therefore provide a path to unprecedented functionality. Herein, we report the novel functionalization of silica with organic alcohols for the first time. Instead of using hydrolyzable organosilylating agents, we used stable organic alcohols with a Zn(II) catalyst to modify the surface of a recently discovered highly reactive macro-mesoporous hydrogen silsesquioxane (HSQ, HSiO1.5) monolith, which was then treated with water with the catalyst to form surface-functionalized silica. These materials were comprehensively characterized with FT-IR, Raman, solid-state NMR, fluorescence spectroscopy, thermal analysis, elemental analysis, scanning electron microscopy, and nitrogen adsorption-desorption measurements. The results obtained from these measurements reveal facile immobilization of organic moieties by dehydrogenative addition onto surface silane (Si-H) at room temperature with high loading and good tolerance of functional groups. The organic moieties can also be retrieved from the monoliths for recycling and reuse, which enables cost-effective and ecological use of the introduced catalytic/reactive surface functionality. Preservation of the reactivity of as-immobilized organic alcohols has been confirmed, moreover, by successfully performing copper-catalyzed azide-alkyne cycloaddition (CuAAC) "click" reactions on the immobilized silica surfaces.

Silver nanoparticles (Ag NPs) have been homogeneously introduced into hierarchically porous monolithic silica columns with well-defined macropores and SBA-15-type hexagonally ordered mesopores by using ethanol as the mild reductant. Within the cylindrical silica mesopores treated with aminopropyl groups as the host, monocrystalline Ag NPs and nanorods are obtained after being treated in silver nitrate/ethanol solution at room temperature for different durations of reducing time. The loading of Ag NPs in the monolith can be increased to 33 wt % by the repetitive treatment, which also led to the formation of polycrystalline Ag nanorods in the mesopores. Although the bare silica column cannot separate aromatic hydrocarbons, good separation of those molecules by noncharged Ag NPs confined in the porous structure of the monolith has been for the first time demonstrated with the Ag NP-embedded silica column. The NP-embedded monolithic silica would be a powerful separation tool for hydrocarbons with different number, position, and configuration of unsaturated bonds.

Monolithic conductive titanium oxides Ti(n)O(2n-1) (n = 2, 3, 4, 6) with well-defined macropores have been successfully prepared as a single phase, via reduction of a macroporous TiO(2) precursor monolith using zirconium getter. Despite substantial removal of oxide ions, all the reduced monoliths retain the macropore properties of the precursor, i.e., uniform pore size distribution and pore volume. Furthermore, compared to commercial porous Ebonex (shaped conductive Ti(n)O(2n-1)), the bulk densities (1.8 g cm(-3)) are half, and the porosities (60%) are about 3 times higher. The obtained Ti(n)O(2n-1) (n = 2, 3, 4, 6) macroporous monoliths could find applications as electrodes for many electrochemical reactions.

Macroporous polymer monoliths based on poly(styrene-co-divinylbenzene) with varied styrene/divinylbenzene ratios have been prepared by organotellurium-mediated living radical polymerization. The well-defined cocontinuous macroporous structure can be obtained by polymerization-induced spinodal decomposition, and the pore structures are controlled by adjusting the starting composition. The separation efficiency of small molecules (alkylbenzenes) in the obtained monoliths has been evaluated in the capillary format by high-performance liquid chromatography (HPLC) under the isocratic reversed-phase mode. Baseline separations of these molecules with a low pressure drop (∼2 MPa) have been achieved because of the well-defined macropores and to the less-heterogeneous cross-linked networks.