Search

Proton-transfer-reaction (PTR) mass spectrometry (MS) is capable of detecting trace-level volatile organic compounds (VOCs) in gaseous samples in real time. Therefore, PTR-MS has become a popular method in many different study areas. Most of the currently reported PTR-MS applications are designed to determine volatile compounds. However, the method might be applicable for nonvolatile organic compound detection. Supercritical fluid chromatography (SFC) has been studied in the last 5 decades. This approach has high separation efficiency and predictable retention behavior, making separation optimization easy. Atmospheric ionization techniques, such as atmospheric chemical ionization (APCI) and electrospray ionization (ESI), are the most studied SFC-MS interfaces. These processes require the addition of makeup solvents to prevent precipitation or crystallization of the solute while depressurizing the mobile phase. In contrast, the PTR process is carried out in a vacuum; supercritical carbon dioxide may release solute into the PTR flow tube without a phase transition as long as it is maintained above a critical temperature. Therefore, this might constitute yet another use for the SFC-MS interface. Caffeine and a few other nonpolar compounds in supercritical carbon dioxide were successfully detected with time-of-flight MS without adding solvent by using preliminarily assembled supercritical flow injection and supercritical fluid extraction (SFE)-PTR interfaces.

Simultaneous ion counting and waveform averaging implemented on a field-programmable gate array compiled with a high-speed digitizer was applied to ultraperformance liquid chromatography-time-of-flight mass spectrometric analysis of sulfa drugs. Ion counting was carried out by a "Peak Detection" (PKD) function that works together with signal averaging (AVG). Sulfadimidine (SDD) and sulfadimethoxine (SDMX) were measured in human serum (HS) model sample matrix. By using simultaneous PKD and AVG acquisition, we observed a unified calibration curve for more than 3 orders of magnitude of sample amounts (0.010-100.0 pmol). The ion count rate for the "practical" sample amounts, such as less than 1 pmol, was below 30%, which is suitable for PKD-based ion counting for quantitative accuracy and excellent peak identification performance. Samples containing 200 fmol or less could not be identified from the AVG waveform. Adding HS treated with acetonitrile severely suppressed the SDMX ion to less than one-half (58.1%). However, a linear response was observed for chromatographic peak area for analytes calculated from PKD waveforms. Also, the mass-resolving power calculated from the peak on the PKD waveform was 24% better than the corresponding AVG waveform, which also improves performance for analyte identification.