Search

The study investigates the formation of Pt nanoparticles within a micro/macroporous hyper-cross-linked polystyrene (HPS) matrix in regard to the direct catalytic oxidation of L-sorbose to 2-keto-L-gulonic acids. It examines the structural characteristics of the nanoparticles at different stages of the reaction using a combination of X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), X-ray diffraction (XRD), and anomalous small-angle X-ray scattering (ASAXS).

Here, we report the structures and properties of biocatalysts based on glucose oxidase (GOx) macromolecules immobilized on the mesoporous zirconia surface with or without magnetic iron oxide nanoparticles (IONPs) in zirconia pores. Properties of these biocatalysts were studied in oxidation of d-glucose to d-gluconic acid at a wide range of pH and temperatures. We demonstrate that the calcination temperature (300, 400, or 600 °C) of zirconia determines its structure, with crystalline materials obtained at 400 and 600 °C. This, in turn, influences the catalytic behavior of immobilized GOx, which was tentatively assigned to the preservation of GOx conformation on the crystalline support surface. IONPs significantly enhance the biocatalyst activity due to synergy with the enzyme. At the same time, neither support porosity nor acidity/basicity shows correlations with the properties of this biocatalyst. The highest relative activity of 98% (of native GOx) at a pH 6-7 and temperature of 40-45 °C was achieved for the biocatalyst based on ZrO 2 calcined at 600 °C and containing IONPs. This process is green as it is characterized by a high atom economy due to the formation of a single product with high selectivity and conversion and minimization of waste due to magnetic separation of the catalyst from an aqueous solution. These and an exceptional stability of this catalyst in 10 consecutive reactions (7% relative activity loss) make it favorable for practical applications., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Nanoparticle (NP)/polymer nanocomposites received considerable attention because of their important applications including catalysis. Metal and metal oxide NPs may impart catalytic properties to polymer nanocomposites, while polymers with a different structure, functionality, and architecture control the NP formation (size, shape, location, composition, etc.) and in this way, govern catalytic properties of nanocomposites. In this review we will discuss the influence of the polymer nanostructure (thin or grafted layers, polymer ordering, polymer nanopores), architecture (branched vs linear), functional groups (coordinating or ionic), specific properties (reducing, stimuli responsive, conductive), etc. on the formation of metal or metal oxide NPs and the catalytic behavior of the nanocomposites. The development of novel and efficient catalysts is crucial for progress in chemical sciences, and this explains a huge number of publications in this area in recent years. Taking into consideration previous review articles on NP/polymer catalysts, we limited this review to a discussion of a narrow temporal scope (2017-April 2019), while embracing a broad subject scope, i.e., considering any polymers and NPs which form catalytic nanocomposites. This gives us a unique view of the field of catalytic polymer nanocomposites and allows understanding of where the field is going.

This paper reports the development of robust Pd- and Ru-containing magnetically recoverable catalysts in a one-pot procedure using commercially available, branched polyethyleneimine (PEI) as capping and reducing agent. For both catalytic metals, ∼3 nm nanoparticles (NPs) are stabilized in the PEI shell of magnetite NPs, whose aggregation allows for prompt magnetic separation. The catalyst properties were studied in a model reaction of 4-nitrophenol hydrogenation to 4-aminophenol with NaBH 4 . A similar catalytic NP size allowed us to decouple the NP size impact on the catalytic performance from other parameters and to follow the influence of the catalytic metal type and amount as well as the PEI amount on the catalytic activity. The best catalytic performances, the 1.2 min -1 rate constant and the 433.2 min -1 turnover frequency, are obtained for the Ru-containing catalyst. This is discussed in terms of stability of Ru hydride facilitating the surface-hydrogen transfer and the presence of Ru 4+ species on the Ru NP surface facilitating the nitro group adsorption, both leading to an increased catalyst efficiency. High catalytic activity as well as the high stability of the catalyst performance in five consecutive catalytic cycles after magnetic separation makes this catalyst promising for nitroarene hydrogenation reactions., Competing Interests: The authors declare no competing financial interest.

Biomass processing to value-added chemicals and biofuels received considerable attention due to the renewable nature of the precursors. Here, we report the development of Ru-containing magnetically recoverable catalysts for cellulose hydrogenolysis to low alcohols, ethylene glycol (EG) and propylene glycol (PG). The catalysts are synthesized by incorporation of magnetite nanoparticles (NPs) in mesoporous silica pores followed by formation of 2 nm Ru NPs. The latter are obtained by thermal decomposition of ruthenium acetylacetonate in the pores. The catalysts showed excellent activities and selectivities at 100% cellulose conversion, exceeding those for the commercial Ru/C. High selectivities as well as activities are attributed to the influence of Fe3O4 on the Ru(0)/Ru(4+) NPs. A facile synthetic protocol, easy magnetic separation, and stability of the catalyst performance after magnetic recovery make these catalysts promising for industrial applications.

The kinetics of D-glucose hydrogenation on the catalyst containing Ru nanoparticles in the matrix of hypercrosslinked polystyrene was studied. Two routes of the hydrogenation reaction were revealed; their rates differ by several digits. The first route includes the interaction of d-glucose with the spilled-over hydrogen supplied by the catalyst; the second one includes classical interaction of the sorbed substrate with incident hydrogen from the reaction medium. A mathematical description of D-glucose conversion and the change of the catalyst activity by the first method of D-glucose hydrogenation were obtained. The most probable scheme of the process flow was suggested. The main kinetic parameters were calculated. The role of hydrogen spillover phenomenon in the kinetics of the processes is discussed.

Here we report the functionalization of monodisperse iron oxide nanoparticles (NPs) with commercially available functional acids containing multiple double bonds such as linolenic (LLA) and linoleic (LEA) acids or pyridine moieties such as 6-methylpyridine-2-carboxylic acid, isonicotinic acid, 3-hydroxypicolinic acid, and 6-(1-piperidinyl)pyridine-3-carboxlic acid (PPCA). Both double bonds and pyridine groups can be reacted with noble metal compounds to form catalytically active species in the exterior of magnetic NPs, thus making them promising magnetically recoverable catalysts. We determined that both LLA and LEA stabilize magnetic iron oxide NPs, allowing the formation of π-complexes with bis(acetonitrile)dichloropalladium(II) in the NP shells. In both cases, this leads to the formation of NP aggregates because of interparticle complexation. In the case of pyridine-containing ligands, only PPCA with two N-containing rings is able to provide NP stabilization and functionalization whereas other pyridine-containing acids did now allow sufficient steric stabilization. The interaction of PPCA-based particles with Pd acetate also leads to aggregation because of interparticle interactions, but the aggregates that are formed are much smaller. Nevertheless, the catalytic properties in the selective hydrogenation of dimethylethynylcarbinol (DMEC) to dimethylvinylcarbinol were the best for the catalyst based on LLA, demonstrating that the NP aggregates in all cases are penetrable for DMEC. Easy magnetic separation of this catalyst from the reaction solution makes it promising as a magnetically recoverable catalyst.