Search

In this work, MoS 2 -based hybrid tubular nanostructures are facilely synthesized via a self-assembly-assisted process and evaluated as a bifunctional electrocatalyst for hydrogen evolution reactions (HERs) and oxygen reduction reactions (ORRs). By simply mixing the reactants under ambient conditions, (NH 4 ) 2 MoS 4 /polydopamine (PDA) hybrid nanospheres are formed. The protonated dopamine is linked to tetrahedral [MoS 4 ] 2- via weak N-H···S and O-H···S interactions, causing the PDA nanospheres merging together and forming nanorods under stirring-induced shear force. Moreover, the oxidative polymerization of dopamine proceeds on the surface of the nanorods, whereas it is prohibited inside the nanorods owing to lack of oxygen, leading to outward diffusion of dopamine and hence cavitation. After annealing, the tubular morphology is perfectly retained, while ultrafine MoS 2 monolayers are formed due to the confinement of the framework. Benefiting from these unique structural features, the MoS 2 /C hybrid nanotubes possess abundant active sites and high surface area, as well as boost electronic and ionic transport, remarkably enhancing their electrocatalytic activities. The onset and half-wave potentials are 0.91 and 0.82 V, respectively, for ORR, close to those of Pt/C. Moreover, low onset potential and small Tafel slope are also observed for HER, demonstrating the potential of the hybrid nanotubes as a promising non-noble metal bifunctional electrocatalyst.

Ultralight and highly elastic reduced graphene oxide (RGO)/lignin-derived carbon (LDC) composite aerogels with aligned micron-sized pores and cell walls are prepared using a facile freeze-drying method. The presence of a small fraction of LDC in the cell walls enhances the interfacial polarization effect while almost maintaining the amount of charge carriers and conductivity of the cell walls, greatly boosting the wave absorption capability of the cell walls. RGO/LDC aerogels also show a greater number of large cell walls with better integrity than RGO aerogels, further improving the multiple reflection ability of the aligned cell walls. Synergistic effects of the multiphase cell walls and the preferred microstructures of the RGO/LDC aerogels lead to their high electromagnetic interference (EMI) shielding effectiveness of 21.3-49.2 dB at an ultralow density of 2.0-8.0 mg/cm 3 . This corresponds to the surface-specific SE (SE divided by density and thickness) up to 53 250 dB·cm 2 /g, which is higher than the values reported for other carbon- and metal-based shields. Furthermore, the critical roles that microstructures play in determining the EMI shielding performance are directly revealed by comparing the shielding performance in directions parallel and normal to cell walls, as well as in an in situ compression process.

Flexible waterborne polyurethane (WPU)/silver nanowire (AgNW) nanocomposites with unidirectionally aligned micrometer-sized pores are fabricated using a facile freeze-drying process, and their dimensions, densities, and AgNW contents are easily controllable. The high-aspect-ratio AgNWs are well-dispersed in the nanocomposite cell walls, giving the nanocomposites good compression strength and excellent electrical conductivity even at very low densities. The large conductivity mismatch between the AgNWs and WPU also induces substantial interfacial polarization that benefits the absorption of electromagnetic (EM) waves, whereas the aligned cell walls promote multireflections of the waves in the porous architectures, further facilitating the absorption. The synergistic actions of the AgNWs, WPU, and unidirectionally aligned pores lead to ultrahigh EM shielding performance. The X-band shielding effectiveness (SE) of the nanocomposites is 64 and 20 dB at the densities of merely 45 and 8 mg/cm 3 , respectively, and ultrahigh surface specific SE of ∼1087 dB cm 3 /(g mm) is achieved with only 0.027 vol % AgNWs, demonstrating that they are promising ultralight, flexible, mechanically robust, high-performance EM shielding materials.

We report one-pot synthesis of Fe(III)-polydopamine (PDA) complex nanospheres, their structures, morphology evolution, and underlying mechanism. The complex nanospheres were synthesized by introducing ferric ions into the reaction mixture used for polymerization of dopamine. It is verified that both the oxidative polymerization of dopamine and Fe(III)-PDA complexation contribute to the "polymerization" process, in which the ferric ions form coordination bonds with both oxygen and nitrogen, as indicated by X-ray absorption fine-structure spectroscopy. In the "polymerization" process, the morphology of the complex nanostructures is gradually transformed from sheetlike to spherical at the feed Fe(III)/dopamine molar ratio of 1/3. The final size of the complex spheres is much smaller than its neat PDA counterpart. At higher feed Fe(III)/dopamine molar ratios, the final morphology of the "polymerization" products is sheetlike. The results suggest that the formation of spherical morphology is likely to be driven by covalent polymerization-induced decrease of hydrophilic functional groups, which causes reself-assembly of the PDA oligomers to reduce surface area. We also demonstrate that this one-pot synthesis route for hybrid nanospheres enables the facile construction of carbonized PDA (C-PDA) nanospheres uniformly embedded with Fe3O4 nanoparticles of only 3-5 nm in size. The C-PDA/Fe3O4 nanospheres exhibit catalytic activity toward oxygen reduction reaction and deliver a stable discharge voltage for over 200 h when utilized as the cathode in a primary Zn-air battery and are also good recyclable catalyst supports.

In this article, a simple self-assembly strategy for fabricating van der Waals heterostructures from isolated two-dimensional atomic crystals is presented. Specifically, dopamine (DOPA), an excellent self-assembly agent and carbon precursor, was adsorbed on exfoliated MoS2 monolayers through electrostatic interaction, and the surface-modified monolayers self-assembled spontaneously into DOPA-intercalated MoS2. The subsequent in situ conversion of DOPA to highly conductive nitrogen-doped graphene (NDG) in the interlayer space of MoS2 led to the formation of a novel NDG/MoS2 nanocomposite with well-defined alternating structure. The NDG/MoS2 was then studied as an anode for lithium-ion batteries (LIBs). The results show that alternating arrangement of NDG and MoS2 triggers synergistic effect between the two components. The kinetics and cycle life of the anode are greatly improved due to the enhanced electron and Li(+) transport as well as the effective immobilization of soluble polysulfide by NDG. A reversible capacity of more than 460 mAh/g could be delivered even at 5 A/g. Moreover, the abundant voids created at the MoS2-NDG interface also accommodate the volume change during cycling and provide additional active sites for Li(+) storage. These endow the NDG/MoS2 heterostructure with low charge-transfer resistance, high sulfur reservation, and structural robustness, rendering it an advanced anode material for LIBs.

In this work, solid, hollow, and porous carbon nanofibers (SNFs, HNFs, and PNFs) were used as hosts to grow MoS2 nanosheets hydrothermally. The results show that the nanosheets on the surface of SNFs and HNFs are comprised of a few grains stacked together, giving direct carbon-MoS2 contact for the first grain and indirect contact for the rest. In contrast, the nanosheets inside of PNFs are of single-grain size and are distributed evenly in the mesopores of PNFs, providing efficient MoS2-carbon contact. Furthermore, the nanosheets grown on the polydopamine-derived carbon surface of HNFs and PNFs have larger interlayer spacing than those grown on polyacrylonitrile-derived carbon surface. As a result, the MoS2 nanosheets in PNFs possess the lowest charge-transfer resistance, the most accessible active sites for lithiation/delithiation, and can effectively buffer the volume variation of MoS2, leading to its best electrochemical performance as a lithium-ion battery anode among the three. The normalized reversible capacity of the MoS2 nanosheets in PNFs is about 1210 mAh g(-1) at 100 mA g(-1), showing the effective utilization of the electrochemical activity of MoS2.

Electrospun polymer nanofibrous mats loaded with ionic liquids (ILs) are promising nonvolatile electrolytes with high ionic conductivity. The large cations of ILs are, however, difficult to diffuse into solid electrodes, making them unappealing for application in some electrochemical devices. To address this issue, a new strategy is used to introduce proton conduction into an IL-based electrolyte. Poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) copolymer is functionalized with sulfonic acid through covalent attachment of taurine. The sulfonic acid-grafted P(VDF-HFP) electrospun mats consist of interconnected nanofibers, leading to remarkable improvement in dimensional stability of the mats. IL-based polymer electrolytes are prepared by immersing the modified mats in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM(+)BF4(-)). It is found that the SO3(-) groups can have Lewis acid-base interactions with the cations (BMIM(+)) of IL to promote the dissociation of ILs, and provide additional proton conduction, resulting in significantly improved ionic conductivity. Using this novel electrolyte, polyaniline-based electrochromic devices show higher transmittance contrast and faster switching behavior. Furthermore, the sulfonic acid-grafted P(VDF-HFP) electrospun mats can also be lithiated, giving additional lithium ion conduction for the IL-based electrolyte, with which Li/LiCoO2 batteries display enhanced C-rate performance.

A new electron acceptor 6-alkylpyrrolo[3,4-d]pyridazine-5,7-dione (PPD) with a very low LUMO level has been synthesized via a challenging inverse electron demand Diels-Alder reaction between thiophene and furan-decorated tetrazine substrates and an electron-deficient 1-alkyl-1H-pyrrole-2,5-dione unit. The PPD monomer has been incorporated into a series of donor-acceptor-type conjugated polymers as electrochromic materials with good optical contrast, fast switching speed, and high coloration efficiency.

In this article, liquid moisture transport behaviors of dual-layer electrospun nanofibrous mats are reported for the first time. The dual-layer mats consist of a thick layer of hydrophilic polyacrylonitrile (PAN) nanofibers with a thin layer of hydrophobic polystyrene (PS) nanofibers with and without interpenetrating nanopores, respectively. The mats are coated with polydopamine (PDOPA) to different extents to tailor the water wettability of the PS layer. It is found that with a large quantity of nanochannels, the porous PS nanofibers exhibit a stronger capillary effect than the solid PS nanofibers. The capillary motion in the porous PS nanofibers can be further enhanced by slight surface modification with PDOPA while retaining the large hydrophobicity difference between the two layers, inducing a strong push-pull effect to transport water from the PS to the PAN layer.

In this work, highly flexible MoS2-based lithium-ion battery anodes composed of disordered thin MoS2 nanoflakes encapsulated in amorphous carbon nanofibrous mats were fabricated for the first time through hydrothermal synthesis of graphene-like MoS2, followed by electrospinning and carbonization. X-ray diffraction as well as scanning and transmission electron microscopic studies show that the as-synthesized MoS2 nanoflakes have a thickness of about 5 nm with an expanded interlayer spacing, and their structure and morphology are well-retained after the electrospinning and carbonization. At relatively low MoS2 contents, the nanoflakes are dispersed and well-embedded in the carbon nanofibers. Consequently, excellent electrochemical performance, including good cyclability and high rate capacity, was achieved with the hybrid nanofibrous mat at the MoS2 content of 47%, which may be attributed to the fine thickness and multilayered structure of the MoS2 sheets with an expanded interlayer spacing, the good charge conduction provided by the high-aspect-ratio carbon nanofibers, and the robustness of the nanofibrous mat.

A novel approach to toughen epoxy resin with lignin, a common waste material from the pulp and paper industry, is presented in this article. First, carboxylic acid-functionalized alkali lignin (AL-COOH) was prepared and subsequently incorporated into anhydride-cured epoxy networks via a one-pot method. The results of mechanical tests show that covalent incorporation of rigid AL-COOH into epoxy networks can significantly toughen the epoxy matrix without deteriorating its tensile strength and modulus. The addition of 1.0 wt % AL-COOH gives increases of 68 and 164% in the critical stress intensity factor (K(IC)) and critical strain energy release rate (G(IC)), respectively, relative to that of neat epoxy. This article opens up the possibility of utilizing low-cost and renewable lignin feedstocks as effective toughening agents for thermoset polymers.

A series of solvent-free ionic liquid (IL)-based polymer electrolytes composed of amorphous and biodegradable poly(propylene carbonate) (PPC) host, LiClO4, and 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM(+)BF4(-)) were prepared and characterized for the first time. FTIR studies reveal that the interaction between PPC chains and imidazolium cations weakens the complexation between PPC chains and Li(+) ions. Thermal analysis (DSC and TGA) results show that the incorporation of BMIM(+)BF4(-) into PPC/LiClO4 remarkably decreases the glass transition temperature and improves the thermal stability of the electrolytes. AC impedance results show that the ionic conductivities of the electrolytes are significantly increased with the increase of BMIM(+)BF4(-) amount, the ambient ionic conductivity of the electrolyte at a PPC/LiClO4/BMIM(+)BF4(-) weight ratio of 1/0.2/3 is 1.5 mS/cm, and the ionic transport behavior follows the Arrhenius equation. Both PPC/LiClO4/BMIM(+)BF4(-) and PPC/BMIM(+)BF4(-) electrolytes were applied in electrochromic devices with polyaniline as the electrochromic layer. The PPC/LiClO4/BMIM(+)BF4(-)-based device exhibits much better electrochromic performance in terms of optical contrast and switching time due to the presence of much smaller cations.

Inspired by the radical scavenging function of melanin-like materials and versatile adhesive ability of mussel-adhesion proteins, dopamine-modified clay (D-clay) was successfully incorporated into polypropylene (PP) using an amine-terminated PP oligomer as the compatibilizer. Although the PP/D-clay nanocomposites exhibit intercalated morphology, the incorporation of D-clay greatly improves the thermo-oxidative stability and UV resistance of PP owing to the strong radical scavenging ability of polydopamine (PDA) and large contact area between PP and the PDA coating on clay mineral. Moreover, the reinforcement effect brought by D-clay is fairly significant at very low clay loadings probably owing to the strong interfacial interactions between the layered silicates and the compatibilizer as well as that between the compatibilizer and the PP matrix. The work demonstrates that D-clay is a type of promising nanofiller for thermoplastics used for outdoor applications since it stabilizes and reinforces the polymers simultaneously.

Clay-based functional hydrogels were facilely prepared via a bioinspired approach. Montmorillonite (clay) was exfoliated into single layers in water and then coated with a thin layer of polydopamine (PDOPA) via in situ polymerization of dopamine under basic aqueous conditions. When a small amount of ferric salt was added into aqueous suspensions of the polydopamine-coated clay (D-clay), D-clay and Fe(3+) ions could rapidly self-assemble into three-dimensional networks through the formation of coordination bonds. Consequently, supramolecular hydrogels were formed at very low D-clay contents. Rheological measurements show that the D-clay/Fe(3+) hydrogels exhibit fairly elastic response in low stain range, and have self-healing capability upon removal of applied large stress. More importantly, the hydrogels can be used as adsorbents to effectively remove Rhodamine 6G (Rh6G), an organic pollutant, from water. UV-vis absorption spectra of the Rh6G-loaded hydrogels show bands related to π-π stacking interactions between the aromatic moieties of PDOPA and Rh6G, confirming the formation of PDOPA/Rh6G complex on the surface of D-clay.

Dopamine-modified clay (D-clay) was successfully dispersed into polyether polyurethane (PU) by solvent blending. It is found that the incorporation of D-clay into PU gives rise to significant improvements in mechanical properties, including initial modulus, tensile strength, and ultimate elongation, at a very low clay loading. The large reinforcement could be attributed to the hydrogen bonds between the hard segments of PU and stiff D-clay layers that lead to more effective interfacial stress transfer between the polymer and D-clay. Besides, the interactions between D-clay and PU are also stronger than those between Cloisite 30B organoclay and the PU chains. Consequently, at a similar clay loading, the PU/D-clay nanocomposite has much higher storage modulus than the PU/organoclay nanocomposite at elevated temperatures.

1D hierarchical tubular MnO(2) nanostructures have been prepared through a facile hydrothermal method using carbon nanofibres (CNFs) as sacrificial template. The morphology of MnO(2) nanostructures can be adjusted by changing the reaction time or annealing process. Polycrystalline MnO(2) nanotubes are formed with a short reaction time (e.g., 10 min) while hierarchical tubular MnO(2) nanostructures composed of assembled nanosheets are obtained at longer reaction times (>45 min). The polycrystalline MnO(2) nanotubes can be further converted to porous nanobelts and sponge-like nanowires by annealing in air. Among all the types of MnO(2) nanostructures prepared, tubular MnO(2) nanostructures composed of assembled nanosheets show optimized charge storage performance when tested as supercapacitor electrodes, for example, delivering an power density of 13.33 kW·kg(-1) and a energy density of 21.1 Wh·kg(-1) with a long cycling life over 3000 cycles, which is mainly related to their features of large specific surface area and optimized charge transfer pathway.

A facile biomimetic method was developed to enhance the interfacial interaction in polymer-layered silicate nanocomposites. By mimicking mussel adhesive proteins, a monolayer of polydopamine was constructed on clay surface by a controllable coating method. The modified clay (D-clay) was incorporated into an epoxy resin, it is found that the strong interfacial interactions brought by the polydopamine benefits not only the dispersion of the D-clay in the epoxy but also the effective interfacial stress transfer, leading to greatly improved thermomechanical properties at very low inorganic loadings. Rheological and infrared spectroscopic studies show that the interfacial interactions between the D-clay and epoxy are dominated by the hydrogen bonds between the catechol-enriched polydopamine and the epoxy.

The electrodes with the hierarchical nanoarchitectures could offer a huge increase in energy storage capacity. However, the ability to achieve such hierarchical architectures on a multiple scale still has remained a great challenge. In this paper, we report a scalable self-assembly strategy to create bioinspired hierarchical structures composed of functionalized graphene sheets to work as anodes of lithium-ion batteries. The resulting electrodes with novel multilevel architectures simultaneously optimize ion transport and capacity, leading to a high performance of reversible capacity of up to 1600 mAh/g, and 1150 mAh/g after 50 cycles. Importantly, the process to fabricate such hierarchical structures is facile, low-cost, green, and scalable, providing a universal approach for the rational design and engineering of electrode materials with enhanced performance, and it may have utility in various applications, including biological scaffold, catalysis, and sensors.

The strong ability of polyhedral oligomeric silsesquioxane (POSS) to aggregate in nonsolvents makes it interesting to study the self-assembly behaviors of polymer-POSS hybrids. Telechelic poly(styrene-ran-sodium styrenesulfonate) with POSS as the end groups was prepared via end-capping of anionic living polystyrene chains with POSS followed by a mild sulfonation. The morphology and association properties of this new amphiphilic hybrid in an aqueous solution were investigated by dynamic and static light scattering, transmission electron microscopy and atomic force microscopy. The studies reveal that the strong aggregation propensity of POSS leads to a low critical micelle concentration and induces the aggregation of micelles. Hollow supermicellar structures can be observed at a low concentration of 1 mg/mL., (© 2011 American Chemical Society)

Hybrid electrochromic materials were readily synthesized via copolymerization of aniline with p-phenylenediamine-functionalized single-walled carbon nanotubes (SWCNTs) in the presence of poly(styrene sulfonate) (PSS) dopant in an aqueous medium. Polyaniline (PANI)-grafted SWCNTs are formed, and they are uniformly dispersed in the PANI/PSS matrix. Impedance analysis shows that the charge-transfer resistances of the hybrids at all states are reduced drastically with increasing SWCNT loading. With 0.8 wt % SWCNTs, the charge-transfer resistances of the hybrid at +1.5 and -1.5 V are only about 20% and 12% of those of PANI/PSS, respectively, which is due to the greatly increased redox reactivity given by the enhanced electron transport in the hybrid and further doping function of the SWCNTs. The remarkable increase in redox reactivity leads to much enhanced electrochromic contrast from 0.34 for PANI to 0.47 for PANI-SWCNT-0.8%.

This paper reports the packing structures of two types of polyhedral oligomeric silsesquioxane (POSS)-imidazolium surfactants with different molecular rigidity in the intergalleries of montmorillonite clay. Wide-angle X-ray scattering (WAXS) and molecular modeling studies suggest that the POSS-imidazolium cations have a bilayer packing structure in clay with the long axes of the molecules largely tilted with respect to the basal plane. Direct evidence for the bilayer structure is provided by transmission electron microscopy (TEM). WAXS and differential scanning calorimetry (DSC) results indicate that the relatively flexible POSS-imidazolium cation is able to form a two-dimensionally ordered structure in the clay intergalleries, while the relatively rigid one exhibits a disordered structure in clay. Furthermore, with reducing surfactant loading, the clay modified with the rigid surfactant exhibits increased interlayer d-spacings probably because the surfactant is able to take more extended conformation at lower loadings. With its low organic content and disordered surfactant packing structure, the clay modified with the rigid surfactant also exhibits excellent thermal and thermo-oxidative stabilities.

Polymer electrolyte is an important component in many multilayer devices such as batteries, fuel cells, and electrochromic devices. The effects of polymer electrolyte solidification on the ionic movement and device performance are presented based on near-infrared (IR) (860-2500 nm) electrochromic (EC) devices using the conducting polymer polyaniline. EC devices using electrolyte with polar polymer host of P(VDF-TrFE) show stable and reversible light modulation up to 65% in gel state and 30% in solid state. This is significantly improved when compared to devices with solidified nonpolar polymer host which retains less than 10% light modulation. Electrochemical impedance combined with in situ light modulation measurement identifies various key characteristics exerted by the electrolyte states on device performance. Gel-state devices are affected by the amount of dissociated ions while ionic movement in the electrolyte bulk and through the electrolyte/EC material interface dictates the light modulation in semisolid devices. For solid-state devices, electronic leakage, ionic dissociation, and interaction with electrochrome molecules have been found to limit the operation.

Polyvinylidene difluoride (PVDF) solutions containing a very low concentration of single-walled carbon nanotubes (SWCNTs) and multiwalled carbon nanotubes (MWCNTs) of similar surface chemistry, respectively, were electrospun, and the nanofibers formed were collected using a modified rotating disk collector. The polymorphic behavior and crystal orientation of the nanofibers were studied using wide-angle X-ray diffraction and infrared spectroscopy, while the nanotube alignment and interfacial interactions in the nanofibers were probed by transmission electron microscopy and Raman spectroscopy. It is shown that the interfacial interaction between the SWCNTs and PVDF and the extensional force experienced by the nanofibers in the electrospinning and collection processes can work synergistically to induce highly oriented beta-form crystallites extensively. In contrast, the MWCNTs could not be well aligned along the nanofiber axis, which leads to a lower degree of crystal orientation.

Water-dispersible polyelectrolyte multilayers (PEM) were obtained by layer-by-layer assembly of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrene sulfonate) (PSS) on water-soluble poly(ethylene glycol)- graft-multiwalled carbon nanotubes (PEG- g-MWNTs), and their structures were investigated using solution (1)H NMR. It was clearly shown that some segments of the adsorbed topmost layers formed in layer-by-layer assembly processes are still highly mobile in aqueous solution, and these segments are totally compensated by subsequent coatings of the oppositely charged layers to form ionically cross-linked polyelectrolyte complexes (PEC) layers; it was demonstrated that the ionization behaviors of the highly mobile segments of the topmost PAH layers are similar to those in solution rather than those in the bulk multilayers at different pH. Furthermore, the similarity among the PEM on substrates and the PEC colloids prepared under similar conditions in solution was supported by solution (1)H NMR results, and the unequal stiochiometry of the cationic group from PAH and the anionic group from PSS in the cores of the PEC colloids in solution was identified from solution (1)H NMR results using PEG as external references. On the basis of these, it is suggested that the PEC layers in PEM formed from coating of the adsorbed topmost PAH layers with PSS solution contain excess PSS, and reversely those formed from coating of the adsorbed topmost PSS layers with PAH solution contain excess PAH. Hence a new description of PEM is put forward that the polyelectrolyte multilayers are composed of alternate layers excess either in PSS or in PAH.

The influence of clay surface modification on the polymorphism behavior of poly(ethylene naphthalate) (PEN)/clay nanocomposites was investigated via in situ Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction. The results show that untreated clay has a heterogeneous nucleating effect on PEN and favors the beta-crystal form, while the surfactant 1-hexadecyl-2,3-dimethylimidazolium (IMC16) has a plasticization effect and tends to enhance the kinetically favored alpha-phase instead. In contrast, the nanocomposite (PEN/IMC16-MMT) formed from IMC16-treated clay (IMC16-MMT) exhibits a strong temperature-dependent polymorphic behavior, with the beta-phase being more favored at 200 degrees C, but the alpha-phase being preferred instead at 180 degrees C. In situ FTIR spectroscopy of PEN/IMC16-MMT reveals an abrupt change in the concentration of alpha- and beta-"crystalline conformers" between the two temperatures during the induction period of crystallization. This is attributed to the hindered formation of stable nuclei at the organoclay surface. In addition, surfactant degradation gives rise to a highly plasticized polymer/organoclay interface. The combination of the hindered heterogeneous nucleation and plasticization effects gives rise to the unique temperature-dependent polymorphism behavior in PEN/IMC16-MMT.

[structure: see text] Tetrahedral precursors of tetra(N-alkyl-3-bromocarbazole-6-yl)silanes (1-3), which were amorphous with T(g) being adjustable by changing the chain length of the N-substitutent, were developed. Fluorene-conjugated glassy compound 4 and hyperbranched polymer 5 were synthesized from the precursors via Suzuki coupling reaction. 4 and 5 emitted blue light efficiently in the condensed state with high quantum efficiencies of 80 (4) and 59% (5) and small fwhm (full width at half-maximum) of 48 (4) and 55 nm (5), indicating that they did not pack into detrimental aggregates in the solid state.