Search

Flexible and stretchable triboelectric nanogenerators (TENGs) have been rapidly advanced owing to the demand for portable and wearable electronic devices that can work under universal or motional circumstances. While versatile materials can be applied in a TENG as dielectric materials, flexible and cost-effective electrodes are crucially important for the output performance of TENGs. Herein, we developed a poly(vinyl alcohol) (PVA) hydrogel TENG doped with a novel two-dimensional material, graphitic carbon nitride (g-C 3 N 4 ), which could act as both a cost-effective flexible electrode and a positive dielectric for TENG with different morphologies. The measured peak-to-peak open-circuit voltage of the TENG reached 80 V at a dopant concentration of 2.7 wt % in single-electrode mode, which is far higher than that of the pristine PVA hydrogel TENG. As a demonstration of the application, the g-C 3 N 4 /PVA hydrogel TENG can be adopted as electronic skin to monitor the movement of the human body. Low-frequency mechanical energy-harvesting devices in different morphologies including discoid flake shape, tube shape, and spiral shape in the single-electrode mode or contact-separation mode have been designed, fabricated, and evaluated. All of these merits of the proposed hydrogel TENG after doping two-dimensional (2D) material g-C 3 N 4 have demonstrated their promising potential for versatile applications in biomechanical energy harvesting and self-powered sensing.

Photochromic materials with rapid color-switching, long color retention times, and rewritability are crucial for meeting the requirements of future rewritable ink-free media. However, these requirements are challenging to satisfy simultaneously due to the inherent constraints among these features. Herein, a novel photochromic nanofiber nonwoven fabric was designed and constructed based on a conjugated organic-inorganic hybrid structure through electrospinning and hot-pressing techniques. The as-prepared fabric can change color in merely 5 s under UV irradiation and can reach saturation within 2 min. In addition, upon the introduction of a potent metal chelator, its color retention time exceeds 14 days under ambient conditions, significantly longer than that of most rewritable materials recently reported (several hours to 5 days). Moreover, the fabric exhibits high writing resolution and can be photoprinted and heat-erased for over 100 cycles while still retaining 96% of its initial reflectivity. Hydrophobic thermoplastic polyurethane provides the fabric with excellent waterproof and antifouling properties, thus preventing the composite from swelling or collecting graffiti due to moisture or dust. This work exploits a competitive approach for designing flexible, rewritable, and superior functional wearables with practical applications.

Synthetic organogels/hydrogels are attracting growing interests due to their potential applications in biomedical fields, organic electronics, and photovoltaics. Photogelation methods for synthesis of organogels/hydrogels have been shown particularly promising because of the high efficiency and simple synthetic procedures. This study synthesized new biodegradable polyhydroxyalkanoates (PHA)-based organogels/hydrogels via UV photo-cross-linking using unsaturated PHA copolymer poly[( R )-3-hydroxyundecanoate- co -( R )-3-hydroxy-10-undecenoate] (PHU10U) with polyethylene glycol dithiol (PDT) as a photo-cross-linker. The PHU10U was synthesized by an engineered Pseudomonas entomophila and characterized via Fourier transform infrared spectroscopy, 1 H nuclear magnetic resonance (NMR), and 13 C NMR. With decreasing the molar ratio of PHU10U to PDT, both the swelling ratio and pore size were decreased. Meanwhile, increasing densities of the gel networks resulted in a higher compressive modulus. Cell cytotoxicity studies based on the CCK-8 assay on both the PHU10U precursor and PHU10U/PDT hydrogels showed that the novel PHA-based biodegradables acting as hydrogels possess good biocompatibility.

A promising new concept is the application of flexible and foldable conductive film or paper for wearable electronics, in which silver nanowires, carbon nanotubes, and graphene are primarily used as conductive materials. However, their insufficient nanostructure contacts lead to poor electrical conductivity and mechanical fracture. Here, we demonstrate a simple and innovative strategy for fabricating a free-standing silver film with inverted pyramids by replicating pyramids on a textured silicon wafer under a hydrothermal reaction. In this unique structure, the inverted pyramids on the film surface can provide sufficient buffer space for a mechanically foldable and unfoldable cushion, and the continuous film ensures an uninterrupted electron transport pathway. As a result, the silver film with inverted pyramids can exhibit extremely high conductivity, with a sheet resistance as low as 2.55 × 10 -3 Ω/sq, corresponding to an electrical conductivity of 4.2 × 10 5 S cm -1 for a 9.2-μm-thick film (67.7% of bulk silver's conductivity). Surprisingly, this film has outstanding mechanical folding stability, with less than a 0.5% deviation from the initial resistance after 35,000 repetitive folding and unfolding cycles when tested at the folding site. The film is free-standing, thin, flexible, foldable, and suitable for cutting and patterned growth, which makes it suitable for wearable electronics, showing a much wider range of applications than substrate-based ones.

A noncleavable paclitaxel (PTX) and N-acetylmuramyl-l-alanyl-d-isoglutamine (MDP) derivative conjugate, 22 (DY-16-43), and its analogues were prepared and characterized as antagonists of NOD2 signaling. This conjugate enhanced the antitumor and antimetastatic efficacy of PTX in Lewis lung carcinoma (LLC) tumor-bearing mice. This work first describes a molecular strategy that enables the sensitization of a chemotherapeutic response via antagonizing NOD2 inflammatory signaling and suggests NOD2 antagonist as potential adjunct in treating non-small-cell lung cancer (NSCLC).