Search

ABSTRACT: The possibility of simultaneous recovery of benzene and metals from the hydrolysis of poly(ethylene terephthalate) (PBT)-based materials such as X-ray films, magnetic tape, and prepaid cards under a steam atmosphere at a temperature of 450 °C was evaluated. The hydrolysis resulted in metal-containing carbonaceous residue and volatile terephthalic acid (TPA). The effects of metals and additives on the recovery process were also investigated. All metals were quantitatively recovered, and silver, maghemite (γ-Fe2O3), and anatase (TiO2) were recovered without any changes in their crystal structures or compositions. In a second step, TPA was decarboxylized in the presence of calcium oxide (CaO) at 700 °C, producing benzene with an average yield of 34% and purity of 76%. Maghemite (γ-Fe2O3) incorporated in magnetic tape and prepaid cards could decarboxylate TPA. Aluminum present in the prepaid cards produced hydrogen by the reaction with steam. However, the presence of metals had no adverse influence on the recovery of benzene-rich oil in the presence of CaO. Therefore, this method can be applied to PET-based materials containing inorganic substances, which cannot be recycled effectively otherwise. [ABSTRACT FROM AUTHOR]

Pyrolysis of cellulose primarily produces 1,6-anhydro-β-d-glucopyranose (levoglucosan), which easily repolymerizes to form coke precursors in the heating zone of a pyrolysis reactor. This hinders the investigation of primary pyrolysis products as well as the elucidation of cellulose pyrolysis mechanisms, particularly because of the significant buildup of coke during slow pyrolysis. The present study discusses the applicability of a pyrolysis-gas chromatography/flame ionization detection (Py-GC/FID) system using naphthalene as the internal standard, with the aim of substantially improving the quantification of pyrolyzates during the slow pyrolysis of cellulose. This method achieved quantification of levoglucosan with a yield that was 14 times higher than that obtained from offline pyrolysis in a simple tube reactor. The high yield recovery of levoglucosan was attributed to the suppression of levoglucosan repolymerization in the Py-GC/FID system, owing to the rapid escape of levoglucosan from the heating zone, low concentration of levoglucosan in the gas phase, and rapid quenching of levoglucosan. Therefore, this method facilitated the improved quantification of primary pyrolysis products during the slow pyrolysis of cellulose, which can be beneficial for understanding the primary pyrolysis reaction mechanisms. This method can potentially be applied to other polymeric materials that produce reactive pyrolyzates., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Aromatic polyimides (PIs) have excellent thermal stability, which makes them difficult to recycle, and an effective way to recycle PIs has not yet been established. In this work, steam pyrolysis of the aromatic PI Kapton was performed to investigate the recovery of useful raw materials. Steam pyrolysis significantly enhanced the gasification of Kapton at 900 °C, resulting in 1963.1 mL g(-1) of a H2 and CO rich gas. Simultaneously, highly porous activated carbon with a high BET surface area was recovered. Steam pyrolysis increased the presence of polar functional groups on the carbon surface. Thus, it was concluded that steam pyrolysis shows great promise as a recycling technique for the recovery of useful synthetic gases and activated carbon from PIs without the need for catalysts and organic solvents.