Search

We have developed a nontoxic method of synthesizing blue-emitting ZnSeTe/ZnSe/ZnS quantum dots (QDs), which can be employed to realize QD-based electroluminescent displays. By introducing excessive metal halides without highly toxic hydrofluoric acid, we achieved a very high photoluminescence quantum yield reaching 94%. Furthermore, for the first time, air-stable ZnSeTe/ZnSe/ZnS QDs were demonstrated by employing simple surface ligand exchange performed both in solution and solid states. Various spectroscopic studies revealed that initial carboxylate ligands could be very effectively replaced by our simple ligand exchange at room temperature. In addition, we significantly broadened the spectral range of QDs by increasing the Te ratio of the core; therefore, green- and red-emitting ZnSeTe/ZnSe/ZnS QDs were demonstrated. The air-stable Zn-based QDs with full color emission developed in our study can be used as superior emitters in displays. [ABSTRACT FROM AUTHOR]

With the growing interest in suppressing greenhouse gas emissions from fossil fuel combustion, the implementation of electrical energy storage devices for efficiently utilizing renewable energy is expanding worldwide. Zn-ion batteries are attractive for energy storage because of their safety, eco-friendliness, high energy density, and low cost. However, their commercialization is hindered by the poor rechargeability of the zinc anode because of Zn dendrite growth and hydrogen evolution. Herein, we present the application of an artificial layer composed of bimodal BaTiO 3 particles on Zn metal to boost the dielectric properties and thus enhance the reversibility of Zn anodes during long-term cycling. The BaTiO 3 layer induces electric polarization under external electric fields, causing the Zn ions to move sequentially toward the Zn anode. Moreover, its mechanical characteristics alleviate the volume changes between the BaTiO 3 layer and Zn metal. Consequently, Zn dendrite growth is effectively inhibited, and the electrochemical performance is significantly improved in Zn|Zn symmetric cells, resulting in a low overvoltage (39 mV) and stable cycling (800 h) at 1 mA cm -2 . Moreover, the Zn-ion full cell using an α-MnO 2 cathode exhibits consistent capacity retention up to 380 cycles. This study demonstrates a new strategy to economically and readily suppress dendrite formation by using bimodal dielectric particles as artificial layers to stabilize metal-based batteries.

Dopamine, which can be electrochemically oxidized to polydopamine on cathode surface, was introduced as an electrolyte additive for high-voltage lithium-ion batteries (LIBs). The addition of 0.1 wt % dopamine to the electrolyte led to the formation of a polydopamine-containing layer on the cathode, thereby resulting in suppression of the oxidative decomposition of the electrolyte during high-voltage operation (up to 4.5 V) of a LiNi1/3Co1/3Mn1/3O2/artificial graphite cell. The addition of dopamine to the electrolyte improved the capacity retention of the cell from 136 to 147 mAh g(-1) after 100 cycles at a rate of 1 C and a cutoff voltage of 4.5 V, while the cycle performance and rate capability with a cutoff voltage of 4.3 V were comparable to those of the cell without dopamine. Further evidence of the positive impact of dopamine on high-voltage LIBs was the lower DC-IRs and AC impedances, as well as the retention of the cathode morphology even after operation at 4.5 V.

A highly adhesive and thermally stable copolyimide (P84) that is soluble in organic solvents is newly applied to silicon (Si) anodes for high energy density lithium-ion batteries. The Si anodes with the P84 binder deliver not only a little higher initial discharge capacity (2392 mAh g(-1)), but also fairly improved Coulombic efficiency (71.2%) compared with the Si anode using conventional polyvinylidene fluoride binder (2148 mAh g(-1) and 61.2%, respectively), even though P84 is reduced irreversibly during the first charging process. This reduction behavior of P84 was systematically confirmed by cyclic voltammetry and Fourier-transform infrared analysis in attenuated total reflection mode of the Si anodes at differently charged voltages. The Si anode with P84 also shows ultrastable long-term cycle performance of 1313 mAh g(-1) after 300 cycles at 1.2 A g(-1) and 25 °C. From the morphological analysis on the basis of scanning electron microscopy and optical images and of the electrode adhesion properties determined by surface and interfacial cutting analysis system and peel tests, it was found that the P84 binder functions well and maintains the mechanical integrity of Si anodes during hundreds of cycles. As a result, when the loading level of the Si anode is increased from 0.2 to 0.6 mg cm(-2), which is a commercially acceptable level, the Si anode could deliver 647 mAh g(-1) until the 300th cycle, which is still two times higher than the theoretical capacity of graphite at 372 mAh g(-1).

Engineering surface morphology as in honeycomb-structured planar films is of great importance for providing new potential application and improved performance in biomedical fields. We demonstrate potential new applications for the uniform biocompatible golf-ball-shaped microparticles that resembles 3D feature of honeycomb-structured film. Dimple size controllable golf-ball-shaped microparticles were fabricated by microfluidic device. Surface dimples not only can act as picoliter beaker but also enhance cell adhesion without any chemical modification of the surface.

We report the fabrication of a flexible and binder-free metal fibril mat-supported Si anode (Si@SFM) by a simple process. The fabricated Si@SFM anode showed a high discharge capacity, ∼3000 mAh g(-1) at a current rate of 300 mA g(-1), and exhibited stable capacity retention, 90% at a 1 C rate (2000 mA g(-1)) after 200 cycles. The rate capability of the electrode was still high even when both the charge and the discharge current rates were markedly increased at the same time (1234 mAh g(-1) for charge-discharge time of ∼12 min). Moreover, owing to its mechanical flexibility, the Si@SFM can be adopted as a key component of flexible lithium-ion batteries (LIBs). After cell packaging, the rechargeable flexible battery under bending stress showed only a little capacity fading (86% of initial capacity) at 1000 mA g(-1) over 150 cycles. These results suggest that the Si@SFM electrode is readily suitable for use in rechargeable flexible LIBs.

Mesoporous silicon nanofibers (m-SiNFs) have been fabricated using a simple and scalable method via electrospinning and reduction with magnesium. The prepared m-SiNFs have a unique structure in which clusters of the primary Si nanoparticles interconnect to form a secondary three-dimensional mesoporous structure. Although only a few nanosized primary Si particles lead to faster electronic and Li(+) ion diffusion compared to tens of nanosized Si, the secondary nanofiber structure (a few micrometers in length) results in the uniform distribution of the nanoparticles, allowing for the easy fabrication of electrodes. Moreover, these m-SiNFs exhibit impressive electrochemical characteristics when used as the anode materials in lithium ion batteries (LIBs). These include a high reversible capacity of 2846.7 mAh g(-1) at a current density of 0.1 A g(-1), a stable capacity retention of 89.4% at a 1 C rate (2 A g(-1)) for 100 cycles, and a rate capability of 1214.0 mAh g(-1) (at 18 C rate for a discharge time of ∼3 min).

We herein report on the large-scale synthesis of ultrathin Bi(2)Te(3) nanoplates and subsequent spark plasma sintering to fabricate n-type nanostructured bulk thermoelectric materials. Bi(2)Te(3) nanoplates were synthesized by the reaction between bismuth thiolate and tri-n-octylphosphine telluride in oleylamine. The thickness of the nanoplates was ~1 nm, which corresponds to a single layer in Bi(2)Te(3) crystals. Bi(2)Te(3) nanostructured bulk materials were prepared by sintering of surfactant-removed Bi(2)Te(3) nanoplates using spark plasma sintering. We found that the grain size and density were strongly dependent on the sintering temperature, and we investigated the effect of the sintering temperature on the thermoelectric properties of the Bi(2)Te(3) nanostructured bulk materials. The electrical conductivities increased with an increase in the sintering temperature, owing to the decreased interface density arising from the grain growth and densification. The Seebeck coefficients roughly decreased with an increase in the sintering temperature. Interestingly, the electron concentrations and mobilities strongly depended on the sintering temperature, suggesting the potential barrier scattering at interfaces and the doping effect of defects and organic residues. The thermal conductivities also increased with an increase in the sintering temperature because of grain growth and densification. The maximum thermoelectric figure-of-merit, ZT, is 0.62 at 400 K, which is one of the highest among the reported values of n-type nanostructured materials based on chemically synthesized nanoparticles. This increase in ZT shows the possibility of the preparation of highly efficient thermoelectric materials by chemical synthesis., (© 2012 American Chemical Society)

Electron scattering at graphene edges is expected to make a crucial contribution to the electron transport in graphene nanodevices by producing quantum interferences. Atomic-scale scanning tunneling microscopy (STM) topographies of different edge structures of monolayer graphene show that the localization of the electronic density of states along the C-C bonds, a property unique to monolayer graphene, results in quantum interference patterns along the graphene carbon bond network, whose shapes depend only on the edge structure and not on the electron energy.

We mapped spatially varying intramolecular electronic structures on a pentacene-gold interface using scanning tunneling spectroscopy. Along with ab initio calculations based on density functional theory, we found that the directional nature of the d orbitals of Au atoms plays an important role in the interaction at the pentacene-gold contact. The gold-induced interface states are broadened and shifted by various pentacene-gold distances determined by the various registries of a pentacene molecule on a gold substrate.