Search

A colloidal approach in a mixture of oleylamine and 1-octadecene is employed to perform a phosphine-free synthesis of p-type copper(I) selenide nanocrystals. The highly conductive films of the obtained nonstoichiometric copper-deficient [Cu.sub.2-x]Se nanocrystals which exhibited high absorption coefficient in the near-infrared region could be used as hole-injection layers in optoelectronic devices.

We propose here a new colloidal approach for the synthesis of both all-inorganic and hybrid organic-inorganic lead halide perovskite nanocrystals (NCs). The main limitation of the protocols that are currently in use, such as the hot injection and the ligand-assisted reprecipitation routes, is that they employ PbX2 (X = Cl, Br, or I) salts as both lead and halide precursors. This imposes restrictions on being able to precisely tune the amount of reaction species and, consequently, on being able to regulate the composition of the final NCs. In order to overcome this issue, we show here that benzoyl halides can be efficiently used as halide sources to be injected in a solution of metal cations (mainly in the form of metal carboxylates) for the synthesis of APbX[sub 3] NCs (in which A = Cs+, CH3NH3+, or CH(NH[sub 2])[sub 2]+). In this way, it is possible to independently tune the amount of both cations and halide precursors in the synthesis. The APbX3 NCs that were prepared with our protocol show excellent optical properties, such as high photoluminescence quantum yields, low amplified spontaneous emission thresholds, and enhanced stability in air. It is noteworthy that CsPbI3 NCs, which crystallize in the cubic α phase, are stable in air for weeks without any postsynthesis treatment. The improved properties of our CsPbX3 perovskite NCs can be ascribed to the formation of lead halide terminated surfaces, in which Cs cations are replaced by alkylammonium ions. [ABSTRACT FROM AUTHOR]

ConspectusLayered metal halide perovskites represent a natural quantum well system for charge carriers that provides rich physics, and the organic encapsulation of the inorganic metal halide layers not only increases their stability in devices but also provides an immense freedom to design their functionality. Intriguingly, these organic moieties strongly impact the optical, electrical, and mechanical properties, not only through their dielectric, elastic, and chemical properties but also because of induced mechanical distortions in the inorganic lattice. This tunability makes two-dimensional layered perovskites (2DLPs) highly attractive as light emitters. Common consensus is that exciton-phonon coupling plays an important role in radiative recombination. For bulk and some two-dimensional (2D) materials, the band edge emission broadening can be described by the classic models for polar inorganic semiconductors, while for the temperature dependence of the self-trapped exciton emission, an analysis developed for color centers has been successfully applied. For many 2DLPs these approaches do not work because of the complexity of their vibrational spectra. However, their emission is still strongly determined by phonons, and therefore, an adequate understanding of the electron-phonon coupling needs to be developed.With polarized and angle-resolved Raman spectroscopy studies on single 2DLP flakes based on different ammonium molecules as organic cations, in 2020 we revealed very rich phonon spectra in the low-frequency regime. Although the phonon bands at low frequency can generally be attributed to the vibrations of the inorganic lattice, we found very different responses by only changing the type of organic cations. In addition, the intensity of the different phonon modes depended strongly on the angle of the linearly polarized excitation beam with respect to the in-plane axes of the octahedron lattice. In 2022, we mapped this angular dependence of the phonon modes, which allowed identification of the directionality of the different lattice vibrations. By correlating the phonon spectra with the temperature-dependent emission for a set of 2DLPs that featured very different self-trapped exciton (STE) emission, we demonstrated that the exciton relaxation cannot be related to coupling with a single (longitudinal-optical) phonon band and that several phonon bands should be involved in the emission process. To gain insights into the exciton-phonon coupling effects on the band edge emission, we performed both angle-resolved polarized emission and Raman spectroscopy on single 2D lead iodide perovskite microcrystals. These experiments revealed the impact of the organic cations on the linear polarization of the emission and corroborated that multiple phonon bands should be involved in the radiative recombination process. Analysis of the temperature-dependent line width broadening of the band edge emission showed that for many systems, the behavior cannot be described by assuming the involvement of only one phonon mode in the electron-phonon coupling process. Our studies revealed a wealth of highly directional low-frequency phonons in 2DLPs from which several bands are involved in the emission process, which leads to diverse optical and vibrational properties depending on the type of organic cation in the material.

Polaritons can be generated by tuning the optical transitions of a light emitter to the resonances of a photonic cavity. We show that a dye-doped cavity generates resonant tunneling polaritons with Epsilon-Near-Zero (ENZ) effective permittivity. We studied the polariton spectral dispersion in dye-doped metal-dielectric-metal (MDM) cavities as a function of the in-plane ( k || ) and out-of-plane ( k ⊥ ) components of the incident wavevector. The dependence on k || was investigated through ellipsometry, revealing the ENZ modes. The k ⊥ dependence was measured by varying the cavity thickness under normal incidence using a Surface Force Apparatus (SFA). Both methods revealed a large Rabi splitting well exceeding 100 meV. The SFA-based investigation highlighted the collective nature of strong coupling by producing a splitting proportional to the square root of the involved photons. This study demonstrates the possibility of generating ENZ polaritons and introduces the SFA as a powerful tool for the characterization of strong light-matter interactions.

Cs 4 PbBr 6 (0D) nanocrystals at room temperature have both been reported as nonemissive and green-emissive systems in conflicting reports, with no consensus regarding both the origin of the green emission and the emission quenching mechanism. Here, via ab initio molecular dynamics (AIMD) simulations and temperature-dependent photoluminescence (PL) spectroscopy, we show that the PL in these 0D metal halides is thermally quenched well below 300 K via strong electron-phonon coupling. To unravel the source of green emission reported for bulk 0D systems, we further study two previously suggested candidate green emitters: (i) a Br vacancy, which we demonstrate to present a strong thermal emission quenching at room temperature; (ii) an impurity, based on octahedral connectivity, that succeeds in suppressing nonradiative quenching via a reduced electron-phonon coupling in the corner-shared lead bromide octahedral network. These findings contribute to unveiling the mechanism behind the temperature-dependent PL in lead halide materials of different dimensionality.

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Halide double perovskites are an interesting alternative to Pb-containing counterparts as active materials in optoelectronic devices. Low-dimensional double perovskites are fabricated by introducing large organic cations, resulting in organic/inorganic architectures with one or more inorganic octahedra layers separated by organic cations. Here, we synthesized layered double perovskites based on 3D Cs 2 AgBiBr 6 , consisting of double (2L) or single (1L) inorganic octahedra layers, using ammonium cations of different sizes and chemical structures. Temperature-dependent Raman spectroscopy revealed phase transition signatures in both inorganic lattice and organic moieties by detecting variations in their vibrational modes. Changes in the conformational arrangement of the organic cations to an ordered state coincided with a phase transition in the 1L systems with the shortest ammonium moieties. Significant changes of photoluminescence intensity observed around the transition temperature suggest that optical properties may be affected by the octahedral tilts emerging at the phase transition.

Lead-halide perovskite nanocrystals are a promising material in optical devices due to their high photoluminescence (PL) quantum yield, excellent color purity, and low stimulated emission threshold. However, one problem is the stability of the nanocrystal films under different environmental conditions and under high temperatures. The latter is particularly relevant for device fabrication if further processes that require elevated temperatures are needed after the deposition of the nanocrystal film. In this work, we study the impact of a thin oxide layer of Al 2 O 3 on the light emission properties of thin nanocrystal films. We find that nanocrystals passivated with quaternary ammonium bromide ligands maintain their advantageous optical properties in alumina-coated films and do not suffer from degradation at temperatures up to 100 °C. This is manifested by conservation of the PL peak position and line width, PL decay dynamics, and low threshold for amplified spontaneous emission. The PL remains stable for up to 100 h at a temperature of 80 °C, and the ASE intensity decreases by less than 30% under constant pumping at high fluence for 1 h. Our approach outlines that the combination of tailored surface chemistry with additional protective coating of the nanocrystal film is a feasible approach to obtain stable emission at elevated temperatures and under extended operational time scales., Competing Interests: The authors declare no competing financial interest.

The vibrational modes in organic/inorganic layered perovskites are of fundamental importance for their optoelectronic properties. The hierarchical architecture of the Ruddlesden-Popper phase of these materials allows for distinct directionality of the vibrational modes with respect to the main axes of the pseudocubic lattice in the octahedral plane. Here, we study the directionality of the fundamental phonon modes in single exfoliated Ruddlesden-Popper perovskite flakes with polarized Raman spectroscopy at ultralow frequencies. A wealth of Raman bands is distinguished in the range from 15 to 150 cm -1 (2-15 meV), whose features depend on the organic cation species, on temperature, and on the direction of the linear polarization of the incident light. By controlling the angle of the linear polarization of the excitation laser with respect to the in-plane axes of the octahedral layer, we gain detailed information on the symmetry of the vibrational modes. The choice of two different organic moieties, phenethylammonium (PEA) and butylammonium (BA), allows us to discern the influence of the linker molecules, evidencing strong anisotropy of the vibrations for the (PEA) 2 PbBr 4 samples. Temperature-dependent Raman measurements reveal that the broad phonon bands observed at room temperature consist of a series of sharp modes and that such mode splitting strongly differs for the different organic moieties and vibrational bands. Softer molecules such as BA result in lower vibrational frequencies and splitting into fewer modes, while more rigid molecules such as PEA lead to higher frequency oscillations and larger number of Raman peaks at low temperature. Interestingly, in distinct bands the number of peaks in the Raman bands is doubled for the rigid PEA compared to the soft BA linkers. Our work shows that the coupling to specific vibrational modes can be controlled by the incident light polarization and choice of the organic moiety, which could be exploited for tailoring exciton-phonon interaction, and for optical switching of the optoelectronic properties of such 2D layered materials.

The photoluminescence (PL), color purity, and stability of lead halide perovskite nanocrystals depend critically on surface passivation. We present a study on the temperature-dependent PL and PL decay dynamics of lead bromide perovskite nanocrystals characterized by different types of A cations, surface ligands, and nanocrystal sizes. Throughout, we observe a single emission peak from cryogenic to ambient temperature. The PL decay dynamics are dominated by surface passivation, and a postsynthesis ligand exchange with a quaternary ammonium bromide (QAB) results in more stable passivation over a larger temperature range. The PL intensity is highest from 50 to 250 K, which indicates that ligand binding competes with the thermal energy at ambient temperature. Despite the favorable PL dynamics of nanocrystals passivated with QAB ligands (monoexponential PL decay over a large temperature range, increased PL intensity and stability), surface passivation still needs to be improved to achieve maximum emission intensity in nanocrystal films.

Two-dimensional colloidal halide perovskite nanocrystals are promising materials for light-emitting applications. Recent studies have focused on nanoplatelets that are able to self-assemble and transform on solid substrates. However, the mechanism behind the process and the atomic arrangement of their assemblies remain unclear. Here, we present a detailed analysis of the transformation of self-assembled stacks of CsPbBr 3 nanoplatelets in solution over a period of a few months by using ex situ transmission electron microscopy and surface analysis. We demonstrate that the transformation mechanism can be understood as oriented attachment, proceeding through the following steps: (i) desorption of the ligands from the surfaces of the particles, causing the seamless atomic merging of nanoplatelet stacks into nanobelts; (ii) merging of neighboring nanobelts that form more extended nanoplates; and (iii) attachment of nanobelts and nanoplates, forming objects with an atomic structure that resembles a mosaic made of broken nanotiles. We reveal that aged nanobelts and nanoplates, which are mainly stabilized by amine/ammonium ions, link through a bilayer of CsBr, with the atomic columns of neighboring perovskite lattices shifted by a half-unit-cell, forming Ruddlesden-Popper planar faults. We also show, via in situ monitoring of the nanocrystal photoluminescence combined with transmission electron microscopy analysis, that the transformation is temperature driven and that it can take place within tens of minutes in solution and in spin-coated films. Understanding this process gives crucial information for the design and fabrication of perovskite materials, where control over the type and density of defects is desired, stimulating the development of perovskite nanocrystal structures with tailored electronic properties.

Colloidal nanocrystals are a promising fluorescent class of materials whose spontaneous emission features can be tuned over a broad spectral range via their composition, geometry, and size. However, toward embedding nanocrystal films in elaborated device geometries, one significant drawback is the sensitivity of their emission properties on further fabrication processes like lithography, metal or oxide deposition, etc. In this work, we demonstrate how bright-emitting and robust thin films can be obtained by combining nanocrystal deposition from solutions via spin coating with subsequent atomic layer deposition of alumina. For the resulting composite films, the layer thickness can be controlled on the nanoscale and their refractive index can be finely tuned by the amount of deposited alumina. Ellipsometry is used to measure the real and imaginary part of the dielectric permittivity, which gives direct access to the wavelength dependent refractive index and absorbance of the film. Detailed analysis of the photophysics of thin films of core-shell nanocrystals with different shapes and different shell thicknesses allows to correlate the behavior of the photoluminescence and of the decay lifetime to the changes in the nonradiative rate that are induced by the alumina deposition. We show that the photoemission properties of such composite films are stable in wavelength and intensity over several months and that the photoluminescence completely recovers from heating processes up to 240 °C. The latter is particularly interesting since it demonstrates robustness to the typical heat treatment that is needed in several process steps like resist-based lithography and deposition by thermal or electron beam evaporation of metals or oxides.

The enhancement of the photophysical response of fluorophores is a crucial factor for photonic and optoelectronic technologies that involve fluorophores as gain media. Recent advances in the development of an extreme light propagation regime, called epsilon-near-zero (ENZ), provide a promising approach in this respect. In this work, we design metal/dielectric nanocavities to be resonant with the absorption and emission bands of the employed fluorophores. Using CsPbBr 3 perovskite nanocrystal films as light emitters, we study the spontaneous emission and decay rate enhancement induced by a specifically tailored double-epsilon-near-zero (double ENZ) structure. We experimentally demonstrate the existence of two ENZ wavelengths, by directly measuring their dielectric permittivity via ellipsometric analysis. The double ENZ nature of this plasmonic nanocavity has been exploited to achieve both surface plasmon enhanced absorption (SPEA) and surface plasmon coupled emission (SPCE), inducing a significant enhancement of both the spontaneous emission and the decay rate of the perovskite nanocrystal film that is placed on top of the nanocavity. Finally, we discuss the possibility of tailoring the two ENZ wavelengths of this structure within the visible spectrum simply by finely designing the thickness of the two dielectric layers, which enables resonance matching with a broad variety of dyes. Our device design is appealing for many practical applications, ranging from sensing to low threshold amplified spontaneous emission, since we achieve a strong PL enhancement with structures that allow for straightforward fluorophore deposition on a planar surface that keeps the fluorophores exposed and accessible., Competing Interests: The authors declare no competing financial interest., (Copyright © 2018 American Chemical Society.)

We propose here a new colloidal approach for the synthesis of both all-inorganic and hybrid organic-inorganic lead halide perovskite nanocrystals (NCs). The main limitation of the protocols that are currently in use, such as the hot injection and the ligand-assisted reprecipitation routes, is that they employ PbX 2 (X = Cl, Br, or I) salts as both lead and halide precursors. This imposes restrictions on being able to precisely tune the amount of reaction species and, consequently, on being able to regulate the composition of the final NCs. In order to overcome this issue, we show here that benzoyl halides can be efficiently used as halide sources to be injected in a solution of metal cations (mainly in the form of metal carboxylates) for the synthesis of APbX 3 NCs (in which A = Cs + , CH 3 NH 3 + , or CH(NH 2 ) 2 + ). In this way, it is possible to independently tune the amount of both cations and halide precursors in the synthesis. The APbX 3 NCs that were prepared with our protocol show excellent optical properties, such as high photoluminescence quantum yields, low amplified spontaneous emission thresholds, and enhanced stability in air. It is noteworthy that CsPbI 3 NCs, which crystallize in the cubic α phase, are stable in air for weeks without any postsynthesis treatment. The improved properties of our CsPbX 3 perovskite NCs can be ascribed to the formation of lead halide terminated surfaces, in which Cs cations are replaced by alkylammonium ions.

The surface ligands on colloidal nanocrystals (NCs) play an important role in the performance of NC-based optoelectronic devices such as photovoltaic cells, photodetectors, and light-emitting diodes (LEDs). On one hand, the NC emission depends critically on the passivation of the surface to minimize trap states that can provide nonradiative recombination channels. On the other hand, the electrical properties of NC films are dominated by the ligands that constitute the barriers for charge transport from one NC to its neighbor. Therefore, surface modifications via ligand exchange have been employed to improve the conductance of NC films. However, in LEDs, such surface modifications are more critical because of their possible detrimental effects on the emission properties. In this work, we study the role of surface ligand modifications on the optical and electrical properties of CdSe/CdS dot-in-rods (DiRs) in films and investigate their performance in all-solution-processed LEDs. The DiR films maintain high photoluminescence quantum yield, around 40-50%, and their electroluminescence in the LED preserves the excellent color purity of the photoluminescence. In the LEDs, the ligand exchange boosted the luminance, reaching a fourfold increase from 2200 cd/m 2 for native surfactants to 8500 cd/m 2 for the exchanged aminoethanethiol (AET) ligands. Moreover, the efficiency roll-off, operational stability, and shelf life are significantly improved, and the external quantum efficiency is modestly increased from 5.1 to 5.4%. We relate these improvements to the increased conductivity of the emissive layer and to the better charge balance of the electrically injected carriers. In this respect, we performed ultraviolet photoelectron spectroscopy (UPS) to obtain a deeper insight into the band alignment of the LED structure. The UPS data confirm similar flat-band offsets of the emitting layer to the electron- and hole-transport layers in the case of AET ligands, which translates to more symmetric barriers for charge injection of electrons and holes. Furthermore, the change in solubility of the NCs induced by the ligand exchange allows for a layer-by-layer deposition process of the DiR films, which yields excellent homogeneity and good thickness control and enables the fabrication of all the LED layers (except for cathode and anode) by spin-coating.

Lead halide perovskite nanocrystals are an emerging class of materials that have gained wide interest due to their facile color tuning and high photoluminescence quantum yield. However, the lack of techniques to translate the high performance of nanocrystals into solid films restricts the successful exploitation of such materials in optoelectronics applications. Here, we report a heat-up and large-scale synthesis of quantum-confined, blue-emitting CsPbBr 3 nanoplatelets (NPLs) that self-assemble into stacked lamellar structures. Spin-coated films fabricated from these NPLs show a stable blue emission with a photoluminescence quantum yield (PLQY) of 25%. The morphology and the optoelectronic properties of such films can be dramatically modified by UV-light irradiation under ambient conditions at a high power, which transforms the self-assembled stacks of NPLs into much larger structures, such as square-shaped disks and nanobelts. The emission from the transformed thin films falls within the green spectral region with a record PLQY of 65%, and they manifest an amplified spontaneous emission with a sharp line width of 4 nm at full-width at half-maximum under femtosecond-pulsed excitation. The transformed films show stable photocurrents with a responsivity of up to 15 mA/W and response times of tens of milliseconds and are robust under treatment with different solvents. We exploit their insolubility in ethanol to fabricate green-emitting, all-solution-processed light-emitting diodes with an external quantum efficiency of 1.1% and a luminance of 590 Cd/m 2 .

We discuss the photoluminescence (PL) of quantum-confined CsPbBr 3 colloidal nanocrystals of two different shapes (nanowires and nanoplatelets) at different concentrations in solution and in solid-state films. Upon increasing the nanocrystal concentration in solution, a constant drop in photoluminescence quantum yield is observed, accompanied by a significant PL red shift. This effect is reversible, and the original PL can be restored by diluting to the original concentration. We show that this effect can be in part attributed to self-absorption and partly to aggregation. In particular, for nanoplatelets, where the aggregation is mostly irreversible, while the self-absorption effect is reversible, the two contributions can be well separated. Finally, when dry solid-state films are prepared, the emission band is shifted into the green spectral region, close to the bulk CsPbBr 3 band gap, thus preventing blue emission from such films.

CsPbBr 3 nanocrystals passivated with short molecular ligands and deposited on a substrate were annealed from room temperature to 400 °C in inert atmosphere. Chemical, structural, and morphological transformations were monitored in situ and ex situ by different techniques, while optoelectronic properties of the film were also assessed. Annealing at 100 °C resulted in a 1 order of magnitude increase in photocurrent and photoresponse as a result of partial sintering of the NCs and residual solvent evaporation. Beyond 150 °C the original orthorhombic NCs were partially transformed into tetragonal CsPb 2 Br 5 crystals, due to the desorption of weakly bound propionic acid ligands. The photocurrent increased moderately until 300 °C although the photoresponse became slower as a result of the formation of surface trap states. Eventually, annealing beyond 350 °C removed the strongly bound butylamine ligands and reversed the transition to the original orthorhombic phase, with a loss of photocurrent due to the numerous defects induced by the stripping of the passivating butylamine., Competing Interests: The authors declare no competing financial interest.

We report a low-temperature colloidal synthesis of single-layer, five-atom-thick, β-In 2 Se 3 nanosheets with lateral sizes tunable from ∼300 to ∼900 nm, using short aminonitriles (dicyandiamide or cyanamide) as shape controlling agents. The phase and the monolayer nature of the nanosheets were ascertained by analyzing the intensity ratio between two diffraction peaks from two-dimensional slabs of the various phases, determined by diffraction simulations. These findings were further backed-up by comparing and fitting the experimental X-ray diffraction pattern with Debye formula simulated patterns and with side-view high-resolution transmission electron microscopy imaging and simulation. The β-In 2 Se 3 nanosheets were found to be indirect band gap semiconductors (E g = 1.55 eV), and single nanosheet photodetectors demonstrated high photoresponsivity and fast response times.

Amyloid β (Aβ) peptides are the main constituents of Alzheimer's amyloid plaques in the brain. Here we report how the unique microfluidic flows exerted by droplets sitting on superhydrophobic surfaces can influence the aggregation mechanisms of several Aβ fragments by boosting their fibril self-assembly. Aβ(25-35), Aβ(1-40), and Aβ(12-28) were dried both on flat hydrophilic surfaces (contact angle (CA) = 37.3°) and on nanostructured superhydrophobic ones (CA = 175.8°). By embedding nanoroughened surfaces on top of highly X-ray transparent Si3N4 membranes, it was possible to probe the solid residues by raster-scan synchrotron radiation X-ray microdiffraction (μXRD). As compared to residues obtained on flat Si3N4 membranes, a general enhancement of fibrillar material was detected for all Aβ fragments dried on superhydrophobic surfaces, with a particular emphasis on the shorter ones. Indeed, both Aβ(25-35) and Aβ(12-28) showed a marked crystalline cross-β phase with varying fiber textures. The homogeneous evaporation rate provided by these nanostructured supports, and the possibility to use transparent membranes, can open a wide range of in situ X-ray and spectroscopic characterizations of amyloidal peptides involved in neurodegenerative diseases and for the fabrication of amyloid-based nanodevices.

Top-down fabrication of electron-beam lithography (EBL)-defined metallic nanostructures is a successful route to obtain extremely high electromagnetic field enhancement via plasmonic effects in well-defined regions. To this aim, various geometries have been introduced such as disks, triangles, dimers, rings, self-similar lenses, and more. In particular, metallic dimers are highly efficient for surface-enhanced Raman spectroscopy (SERS), and their decoupling from the substrate in a three-dimensional design has proven to further improve their performance. However, the large fabrication time and cost has hindered EBL-defined structures from playing a role in practical applications. Here we present three-dimensional nanostar dimer devices that can be recycled via maskless metal etching and deposition processes, due to conservation of the nanostructure pattern in the 3D geometry of the underlying Si substrate. Furthermore, our 3D-nanostar-dimer-in-ring structures (3D-NSDiRs) incorporate several advantageous aspects for SERS by enhancing the performance of plasmonic dimers via an external ring cavity, by efficient decoupling from the substrate through an elevated 3D design, and by bimetallic AuAg layers that exploit the increased performance of Ag while maintaining the biocompatibility of Au. We demonstrate SERS detection on rhodamine and adenine at extremely low density up to the limit of few molecules and analyze the field enhancement of the 3D-NSDiRs with respect to the exciting wavelength and metal composition.

CdS nanocrystals (NCs) synthesized by colloidal chemistry methods have been intensively studied for various applications. However, little attention has been paid to the interaction between the oxygen molecules present in air and the NC surface, which has a strong influence on the electrical properties of NC films. Here, we discuss the effect of oxygen adsorption at the NC surface on the photoconductivity of CdS NC films that were treated by propyltrichlorosilane, which is known to replace the native ligands at the NC surface with chloride ions. The photocurrent-voltage (PIV) characteristics of NC@Cl films recorded under oxygen atmosphere reveal a significant reduction in the photocurrent, as compared to those recorded under argon or vacuum. We demonstrate that this reduction can be related to adsorbed oxygen ions that effectively passivate the NC surface. This passivation reduces the free electron concentration and thereby reduces the photocurrent. Furthermore, we have investigated the light intensity dependence of the photocurrent dynamics of our devices in argon and in oxygen. These measurements confirm that the adsorption of oxygen is a photo-assisted process. Eventually, the potential of using our devices as oxygen sensors is assessed. A remarkable sensitivity of 35 is obtained at room temperature for 10% (concentration) oxygen flow, which is at least one order of magnitude higher than the results reported in the literature. Our work clarifies the mechanism of the photoconductivity reduction in CdS NC films upon oxygen adsorption and opens up opportunities of exploring such devices for gas sensing applications.

Here we are presenting a comparative analysis of conformational changes of two amyloid β peptides, Aβ(25-35) and Aβ(1-42), in the presence and absence of a phospholipid system, namely, POPC/POPS (1-palmitoyl-2-oleoylphospatidylcholine/palmitoyl-2-oleoylphospatidylserine), through Raman spectroscopy, synchrotron radiation micro Fourier-transform infrared spectroscopy, and micro X-ray diffraction. Ringlike samples were obtained from the evaporation of pure and mixed solutions of the proteins together with the POPC/POPS system on highly hydrophilic substrates. The results confirm the presence of a α-helical to β-sheet transition from the internal rim of the ringlike samples to the external one in the pure Aβ(25-35) residual, probably due to the convective flow inside the droplets sitting on highly hydrophilic substrates enhancing the local concentration of the peptide at the external edge of the dried drop. In contrast, the presence of POPC/POPS lipids in the peptide does not result in α-helical structures and introduces the presence of antiparallel β-sheet material together with parallel β-sheet structures and possible β-turns. As a control, Aβ(1-42) peptide was also tested and shows β-sheet conformations independently from the presence of the lipid system. The μXRD analysis further confirmed these conclusions, showing how the absence of the phospholipid system induces in the Aβ(25-35) a probable composite α/β material while its coexistence with the peptide leads to a not oriented β-sheet conformation. These results open interesting scenarios on the study of conformational changes of Aβ peptides and could help, with further investigations, to better clarify the role of enzymes and alternative lipid systems involved in the amyloidosis process of Aβ fragments.

In this Letter we report patterning of colloidal nanocrystal films that combines direct e-beam (electron beam) writing with cation exchange. The e-beam irradiation causes cross-linking of the ligand molecules present at the nanocrystal surface, and the cross-linked molecules act as a mask for further processing. Consequently, in the following step of cation exchange, which is performed by directly dipping the substrate in a solution containing the new cations, the regions that have not been exposed to the electron beam are chemically transformed, while the exposed ones remain unchanged. This selective protection allows the design of patterns that are formed by chemically different nanocrystals, yet in a homogeneous nanocrystal film. Spatially resolved compositional analysis by energy-dispersive X-ray spectroscopy (EDS) corroborates that the selective exchange occurs only in the nonirradiated regions. We demonstrate the utility of this lithography approach by fabricating conductive wires and luminescent patterns in CdSe/CdS nanocrystal films by converting nonirradiated regions to Cu2-xSe/Cu2-xS. Furthermore, we show that X-ray irradiation too can lead to protection from cation exchange.

Charge transport across metal-semiconductor interfaces at the nanoscale is a crucial issue in nanoelectronics. Chains of semiconductor nanorods linked by Au particles represent an ideal model system in this respect, because the metal-semiconductor interface is an intrinsic feature of the nanosystem and does not manifest solely as the contact to the macroscopic external electrodes. Here we investigate charge transport mechanisms in all-inorganic hybrid metal-semiconductor networks fabricated via self-assembly in solution, in which CdSe nanorods were linked to each other by Au nanoparticles. Thermal annealing of our devices changed the morphology of the networks and resulted in the removal of small Au domains that were present on the lateral nanorod facets, and in ripening of the Au nanoparticles in the nanorod junctions with more homogeneous metal-semiconductor interfaces. In such thermally annealed devices the voltage dependence of the current at room temperature can be well described by a Schottky barrier lowering at a metal semiconductor contact under reverse bias, if the spherical shape of the gold nanoparticles is considered. In this case the natural logarithm of the current does not follow the square-root dependence of the voltage as in the bulk, but that of V(2/3). From our fitting with this model we extract the effective permittivity that agrees well with theoretical predictions for the permittivity near the surface of CdSe nanorods. Furthermore, the annealing improved the network conductance at cryogenic temperatures, which could be related to the reduction of the number of trap states.

Great control over size, shape and optical properties is now possible in colloidal Cd-based nanocrystals, which has paved the way for many fundamental studies and applications. One popular example of such class of nanocrystals is represented by CdSe(spherical core)/CdS(rod shell) nanorods. These can be nearly monodisperse in size and shape and have strong and stable photoluminescence that is tunable in the visible range (mainly by varying the size of the CdSe core). The corresponding Zn-based core/shell nanorods would be good candidates for tunable emission in the blue-UV region. However, while the synthesis of ZnS nanocrystals with elongated shapes has been demonstrated based on the oriented-attachment mechanism, elongated ZnS shells are difficult to fabricate because the more common cubic phase of ZnS has a highly symmetric crystal structure. We report here a procedure based on a sequence of two cation exchange reactions, namely, Cd(2+)⇒Cu(+) and then Cu(+)⇒Zn(2+), by which we transform colloidal CdSe(core)/CdS(shell) nanorods first into into Cu(2)Se/Cu(2)S nanorods, which are then converted into blue-UV fluorescent ZnSe(core)/ZnS(shell) nanorods. The procedure transfers the morphological and structural information of the initial Cd-based nanorods to the Zn-based nanorods. Therefore, the final nanoparticles are made by a ZnSe dot embedded in a rod-shaped shell of wurtzite ZnS. Since in the starting Cd-based nanorods the size of the CdSe core and the length of the CdS shell can be well controlled, the same holds for the final Zn-based rods. In the second step of the exchange reaction (Cu(+)⇒Zn(2+)), a large excess of Zn(2+) ions added over the Cu(+) ions present in the Cu(2)Se/Cu(2)S nanorods is the key requisite to obtain bright, band-edge emission (with quantum yields approaching 15%) with narrow line widths (approaching 75 meV). In these ZnSe/ZnS nanorods, photogenerated carriers appear to be more confined in the core region compared to their parent CdSe/CdS nanorods.

We report on photoconduction and optical properties of aligned assemblies of core-shell CdSe/CdS nanorods prepared by a seeded growth approach. We fabricate oriented layers of nanorods by drop casting the nanorods from a solution on substrates with prepatterned, micrometer-spaced electrodes and obtain nanorod alignment due to the coffee stain effect. The photoconductivity of the nanorod layers can be improved significantly by an annealing process under vacuum conditions. The spectral response of the photocurrent shows distinct features that can be assigned to the electronic level structure of the core-shell nanorods and that relate well to the spectra obtained by absorption measurements. We study assemblies of nanorods oriented parallel and perpendicular to the applied electric field by the combined use of photocurrent and photoluminescence spectroscopy. We obtain consistent results which show that charge carrier separation and transport are more efficient for nanorods oriented parallel to the electric field. We also investigate the light polarization sensitivity of the photocurrent for the oriented nanorod layers and observe higher conductivity in the case of perpendicular polarization with respect to the long axis of the nanorods.