Search

Herein, we systematically examined how composition influenced the properties of vinyl addition polynorbornene anion exchange membranes (AEMs) prepared from 5 -n -hexyl-2-norbornene and 5-(4-bromobutyl)-2-norbornene. Copolymerization kinetics revealed that 5 -n -hexyl-2-norbornene is consumed faster than 5-(4-bromobutyl)-2-norbornene, leading to a portion of the chain being richer in bromoalkyl groups. The alkyl halide pendants can then be converted to either trimethylammonium or tetrakis(dialkylamino)phosphonium cations through straightforward substitution with trimethylamine or a tris(dialkylamino)phosphazene. A series of cationic ammonium polymers were synthesized first, where conductivity and water uptake increased as a function of increasing ionic content in the polymer. The optimized copolymer had a hydroxide conductivity of 95 ± 6 mS/cm at 80 °C. The living polymerization of the two monomers catalyzed by a cationic tert -butylphosphine palladium catalyst also enabled precise changes in the molecular weight while keeping the functional group concentration constant. Molecular weight did not have a significant impact on hydroxide conductivity over the range of ∼60-190 kg/mol ( M n ). The optimized tetraaminophosphonium AEM had the highest conductivity for any tetraaminophosphonium polymer to date (70 ± 3 mS/cm at 80 °C). Clear phase separation and larger domains were observed for the phosphonium-based AEM compared to the ammonium at an identical composition, which is attributed to the larger occupied volume of the phosphorus cation. Fuel cell studies with the two membranes resulted in peak power densities of 1.59 and 0.79 W/cm 2 for the ammonium and tetraaminophosphonium membrane electrode assemblies, respectively. The ammonium-based membrane was more water permeable as evidenced by water limiting current studies, which likely contributed to the improved performance., Competing Interests: The authors declare the following competing financial interest(s): A provisional patent has also been filed on this work., (© 2024 The Authors. Published by American Chemical Society.)

The alkaline earth stannates are touted for their wide band gaps and the highest room-temperature electron mobilities among all of the perovskite oxides. CaSnO 3 has the highest measured band gap in this family and is thus a particularly promising ultrawide band gap semiconductor. However, discouraging results from previous theoretical studies and failed doping attempts had described this material as "undopable". Here we redeem CaSnO 3 using hybrid molecular beam epitaxy, which provides an adsorption-controlled growth for the phase-pure, epitaxial, and stoichiometric CaSnO 3 films. By introducing lanthanum (La) as an n-type dopant, we demonstrate the robust and predictable doping of CaSnO 3 with free electron concentrations, n 3D , from 3.3 × 10 19 cm -3 to 1.6 × 10 20 cm -3 . The films exhibit a maximum room-temperature mobility of 42 cm 2 V -1 s -1 at n 3D = 3.3 × 10 19 cm -3 . Despite having a comparable radius as the host ion, La expands the lattice parameter. Using density functional calculations, this effect is attributed to the energy gain by lowering the conduction band upon volume expansion. Finally, we exploit robust doping by fabricating CaSnO 3 -based field-effect transistors. The transistors show promise for CaSnO 3 's high-voltage capabilities by exhibiting low off-state leakage below 2 × 10 -5 mA/mm at a drain-source voltage of 100 V and on-off ratios exceeding 10 6 . This work serves as a starting point for future studies on the semiconducting properties of CaSnO 3 and many devices that could benefit from CaSnO 3 's exceptionally wide band gap.

Cation exchange is becoming extensively used for nanocrystal (NC) doping in order to produce NCs with unique optical and electronic properties. However, despite its ever-increasing use, the relationships between the cation exchange process, its doped NC products, and the resulting NC photophysics are not well characterized. For example, similar doping procedures on NCs with the same chemical compositions have resulted in quite different photophysics. Through a detailed single molecule investigation of a postsynthesis Ag + doping of CdSe NCs, a number of species were identified within a single doped NC sample, suggesting the differences in the optical properties of the various synthesis methods are due to the varied contributions of each species. Electrostatic force microscopy (EFM), electron energy loss spectroscopy (EELS) mapping, and single molecule photoluminescence (PL) studies were used to identify four possible species resulting from the Ag + -CdSe cation exchange doping process. The heterogeneity of these samples shows the difficulty in controlling a postsynthesis cation exchange method to produce homogeneous samples needed for use in any potential application. Additionally, the heterogeneity in the doped samples demonstrates that significant care must be taken in describing the ensemble or average characteristics of the sample., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst-support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies.

ConspectusThe rich physics permeating the phase diagrams of quantum materials have commanded the attention of the solid-state chemistry, materials science, and condensed-matter physics communities, sparking immense research into quantum phase transitions including superconducting, ferroic, and charge-order transitions. Many of these transitions occur at low temperatures and involve electronic, magnetic, or lattice order, which emerges on the atomic to mesoscopic scales. The complex interplay of these states and the heterogeneity that arises due to competition and intertwining of phases, however, is not fully understood and requires probes that capture ordering over multiple length scales down to the local atomic symmetries. Advances in scanning transmission electron microscopy (STEM) have enabled atomic-resolution imaging as well as mapping of functional picometer-scale atomic displacements inside materials. In this Account, we discuss our group's work to expand the reach of atomic-resolution STEM to cryogenic temperatures (cryo-STEM) to study quantum materials with focus on charge-ordered systems.Charge-ordered phases, in which electrons as well as the atomic lattice form periodic patterns that lift the translational symmetries of the crystal, are not only intertwined with superconductivity but also underlie other exotic electronic phenomena such as colossal magnetoresistance and metal-insulator transitions. The periodic lattice distortions (PLDs) modulate the positions of the crystal's nuclei, which can be readily probed by electron microscopy. In a set of examples, we demonstrate cryo-STEM as a powerful technique for probing local order, nanometer-scale heterogeneities, and topological defects in charge-ordered manganites and in transition metal dichalcogenide charge density wave (CDW) systems.With the nearly commensurate-to-commensurate CDW transition upon cooling in 1T-TaS 2 , we show that nanoscale lattice textures in CDW phases can be revealed through direct imaging. These early atomic-resolution results, however, also highlighted the need for improvements in cryo-STEM imaging, which led to a push to advance data collection and analysis for direct spatial mapping and quantification of PLDs. By introducing an image registration algorithm developed specifically to accommodate fast, low signal-to-noise image acquisitions of crystalline lattices, we address previous limitations due to sample drift in cryo-STEM experiments. This has enabled subangstrom cryo-STEM imaging with sufficient signal-to-noise to reveal the low temperature structure of 1T'-TaTe 2 . Furthermore, it allows mapping and quantification of PLD atomic displacements in the charge-ordered manganites Bi 0.35 Sr 0.18 Ca 0.47 MnO 3 and Nd 0.5 Sr 0.5 MnO 3 with picometer precision at ∼95 K to resolve not only distinct ordered phases (i.e., site- and bond-centered charge order) but also their nanoscale coexistence within the same sample.Atomic-resolution cryo-STEM opens new opportunities for understanding the microscopic underpinnings of quantum phases. In this Account, we focus on spatial mapping of lattice degrees of freedom in phases that are present at temperatures down to liquid nitrogen. Further advances in instrumentation are needed to expand the temperature range and to also enable atomic-resolution measurements that rely on weaker signals such as electron energy loss spectroscopy (EELS) for probing of electronic structure or 4D-STEM approaches to map electric and magnetic fields.

Incorporating magnetism into two-dimensional (2D) van der Waals (vdW) heterostructures is crucial for the development of functional electronic and magnetic devices. Here, we show that Nb 3 X 8 (X = Cl, Br) is a family of 2D layered trimerized kagomé magnets that are paramagnetic at high temperatures and undergo a first-order phase transition on cooling to a singlet magnetic state. X-ray diffraction shows that a rearrangement of the vdW stacking accompanies the magnetic transition, with high- and low-temperature phases consistent with scanning transmission electron microscopy images of the end members α-Nb 3 Cl 8 and β-Nb 3 Br 8 . The temperature of this transition is systematically varied across the solid solution Nb 3 Cl 8- x Br x ( x = 0-8), with x = 6 having transitions near room temperature. The solid solution also varies the optical properties, which are further modulated by the phase transition. As such, they provide a platform on which to understand and exploit the interplay between dimensionality, magnetism, and optoelectronic behavior in vdW materials.

Interfaces between complex oxides constitute a unique playground for two-dimensional electron systems (2DESs), where superconductivity and magnetism can arise from combinations of bulk insulators. The 2DES at the LaAlO 3 /SrTiO 3 interface is one of the most studied in this regard, and its origin is determined by the polar field in LaAlO 3 as well as by the presence of point defects, like oxygen vacancies and intermixed cations. These defects usually reside in the conduction channel and are responsible for a decrease of the electronic mobility. In this work, we use an amorphous WO 3 overlayer to obtain a high-mobility 2DES in WO 3 /LaAlO 3 /SrTiO 3 heterostructures. The studied system shows a sharp insulator-to-metal transition as a function of both LaAlO 3 and WO 3 layer thickness. Low-temperature magnetotransport reveals a strong magnetoresistance reaching 900% at 10 T and 1.5 K, the presence of multiple conduction channels with carrier mobility up to 80 000 cm 2 V -1 s -1 , and quantum oscillations of conductance.

Epitaxially connected assemblies of nanocrystals (NCs) present an interesting new class of nanomaterial in which confinement of charge carriers is intermediate between that of a quantum dot and a quantum well. Despite impressive advances in the formation of high-fidelity assemblies, predicted collective properties have not yet emerged. A critical knowledge gap toward realizing these properties is the current lack of understanding of and control over the formation of epitaxial interdot bonds connecting the NCs within the assemblies. In this work we demonstrate successive ionic layer absorption and reaction (SILAR) to enhance the interdot bonding within the NC assembly. SILAR treatment improved the fraction of interdot bonds from 82% to 91% and increased their width from 3.1 to 4.0 nm. Absorption spectra and charge transport measurements indicate that the effect of postassembly growth on quantum confinement in this system depends on the composition of the SILAR shell material. Increased NC film conductance following SILAR processing indicates that building and strengthening interdot bonds lead to increased electronic coupling and doping in the assemblies. The postassembly film growth detailed here presents an opportunity to repair structural defects and to tailor the balance of quantum confinement and interdot coupling in epitaxially connected NC assemblies.

Decades of research focused on size and shape control of iron oxide nanoparticles have led to methods of synthesis that afford excellent control over physical size and shape but comparatively poor control over magnetic properties. Popular synthesis methods based on thermal decomposition of organometallic precursors in the absence of oxygen have yielded particles with mixed iron oxide phases, crystal defects, and poorer than expected magnetic properties, including the existence of a thick "magnetically dead layer" experimentally evidenced by a magnetic diameter significantly smaller than the physical diameter. Here, we show how single-crystalline iron oxide nanoparticles with few defects and similar physical and magetic diameter distributions can be obtained by introducing molecular oxygen as one of the reactive species in the thermal decomposition synthesis. This is achieved without the need for any postsynthesis oxidation or thermal annealing. These results address a significant challenge in the synthesis of nanoparticles with predictable magnetic properties and could lead to advances in applications of magnetic nanoparticles.

Incorporating oxides with radically different physical and chemical properties into heterostructures offers tantalizing possibilities to derive new functions and structures. Recently, we have fabricated freestanding 2D oxide membranes using the water-soluble perovskite Sr 3 Al 2 O 6 as a sacrificial buffer layer. Here, with atomic-resolution spectroscopic imaging, we observe that direct growth of oxide thin films on Sr 3 Al 2 O 6 can cause complete phase transformation of the buffer layer, rendering it water-insoluble. More importantly, we demonstrate that an ultrathin SrTiO 3 layer can be employed as an effective barrier to preserve Sr 3 Al 2 O 6 during subsequent growth, thus allowing its integration in a wider range of oxide heterostructures.

Stimuli-responsive materials have attracted great interest in catalysis, sensing, and drug delivery applications and are typically constituted by soft components. We present a one-pot synthetic method for a type of inorganic silica-based shape change material that is responsive to water vapor exposure. After the wetting treatment, the cross-sectional shape of aminated mesoporous silica nanoparticles (MSNs) with hexagonal pore lattice changed from hexagonal to six-angle-star, accompanied by the loss of periodic mesostructural order. Nitrogen sorption measurements suggested that the wetting treatment induced a shrinkage of mesopores resulting in a broad size distribution and decreased mesopore volume. Solid-state (29)Si nuclear magnetic resonance (NMR) spectroscopy of samples after wetting treatment displayed a higher degree of silica condensation, indicating that the shape change was associated with the formation of more siloxane bonds within the silica matrix. On the basis of material characterization results, a mechanism for the observed anisotropic shrinkage is suggested based on a buckling deformation induced by capillary forces in the presence of a threshold amount of water vapor available beyond a humidity of about 50%. The work presented here may open a path toward novel stimuli-responsive materials based on inorganic components.

We demonstrate that the atomic boundary conditions of simple binary oxides can be used to impart dramatic changes of state. By changing the substrate surface termination of LaAlO3 (001) from AlO2 to LaO, the room-temperature sheet conductance of anatase TiO2 films are increased by over 3 orders of magnitude, transforming the intrinsic insulating state to a high mobility metallic state, while maintaining excellent optical transparency.