Search

Crystalline riboflavin (vitamin B 2 ) performs an important biological role as an optically functional material in the tapetum lucidum of certain animals, notably lemurs and cats. The tapetum lucidum is a reflecting layer behind the retina, which serves to enhance photon capture and vision in low-light settings. Motivated by the aim of rationalizing its biological role, and given that the structure of biogenic solid-state riboflavin remains unknown, we have used a range of experimental and computational techniques to determine the solid-state structure of synthetic riboflavin. Our multitechnique approach included microcrystal XRD, powder XRD, three-dimensional electron diffraction (3D-ED), high-resolution solid-state 13 C NMR spectroscopy, and dispersion-augmented density functional theory (DFT-D) calculations. Although an independent report of the crystal structure of riboflavin was published recently, our structural investigations reported herein provide a different interpretation of the intermolecular hydrogen-bonding arrangement in this material, supported by all the experimental and computational approaches utilized in our study. We also discuss, more generally, potential pitfalls that may arise in applying DFT-D geometry optimization as a bridging step between structure solution and Rietveld refinement in the structure determination of hydrogen-bonded materials from powder XRD data. Finally, we report experimental and computational values for the refractive index of riboflavin, with implications for its optical function., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Small molecule structures and their applications rely on good knowledge of their atomic arrangements. However, the crystal structures of these compounds and materials, which are often composed of fine crystalline domains, cannot be determined with single-crystal X-ray diffraction. Three-dimensional electron diffraction (3D ED) is already becoming a reliable method for the structure analysis of submicrometer-sized organic materials. The reduction of electron beam damage is essential for successful structure determination and often prevents the analysis of organic materials at room temperature, not to mention high temperature studies. In this work, we apply advanced 3D ED methods at different temperatures enabling the accurate structure determination of two phases of Pigment Orange 34 (C 34 H 28 N 8 O 2 Cl 2 ), a biphenyl pyrazolone pigment that has been industrially produced for more than 80 years and used for plastics application. The crystal structure of the high-temperature phase, which can be formed during plastic coloration, was determined at 220 °C. For the first time, we were able to observe a reversible phase transition in an industrial organic pigment in the solid state, even with atomic resolution, despite crystallites being submicrometer in size. By localizing hydrogen atoms, we were even able to detect the tautomeric state of the molecules at different temperatures. This demonstrates that precise, fast, and low-dose 3D ED measurements enable high-temperature studies the door for general in situ studies of nanocrystalline materials at the atomic level.

We report on a nonoxidative topochemical route for the synthesis of a novel indate-based oxyfluoride, LaBaInO 3 F 2 , using a low-temperature reaction of Ruddlesden-Popper-type LaBaInO 4 with polyvinylidene difluoride as a fluorinating agent. The reaction involves the replacement of oxide ions with fluoride ions as well as the insertion of fluoride ions into the interstitial sites. From the characterization via powder X-ray diffraction (PXRD) and Rietveld analysis as well as automated electron diffraction tomography (ADT), it is deduced that the fluorination results in a symmetry lowering from I 4 /mmm (139) to monoclinic C 2 /c (15) with an expansion perpendicular to the perovskite layers and a strong tilting of the octahedra in the ab plane. Disorder of the anions on the apical and interstitial sites seems to be favored. The most stable configuration for the anion ordering is estimated based on an evaluation of bond distances from the ADT measurements via bond valence sums (BVSs). The observed disordering of the anions in the oxyfluoride results in changes in the optical properties and thus shows that the topochemical anion modification can present a viable route to alter the optical properties. Partial densities of states (PDOSs) obtained from ab initio density functional theory (DFT) calculations reveal a bandgap modification upon fluoride-ion introduction which originates from the presence of the oxide anions on the interstitial sites. The photocatalytic performance of the oxide and oxyfluoride shows that both materials are photocatalytically active for hydrogen (H 2 ) evolution.

To access porous metal phosphonates, a new V-shaped, rigid, and sterically demanding diphosphonic acid, namely 3,6-diphosphono-9 H -carbazole (H 4 L), was designed and employed in a high-throughput investigation. Screening of different metal salts and subsequent optimization studies resulted in the isolation of two porous metal phosphonates [Cu 2 (H 2 O) 2 (L)]·2H 2 O ( CAU-37 ) and [Zn 6.75 (H 2 O) 1.5 (HL) 2.5 (L) 1.5 ]·8H 2 O ( CAU-57 ). Structure determination was accomplished by electron diffraction and the dehydration behavior of CAU-37 was followed in situ. A rare case of intralayer water de-/adsorption in CAU-37 was found which leads to a cell volume change of 11.9%. Rod-shaped inorganic building units (IBUs) are connected to layers and structural flexibility is due to "accordion-like" structural changes within the layers. In contrast, in CAU-57 a layered IBU is found, which usually results in the formation of dense structures. Due to the shape and rigidity of the linker, the interconnection of the IBUs results in the formation of pores. Water sorption measurements in combination with powder X-ray diffraction data confirmed the reversibility under structural retention.

Thermal decomposition is a promising route for the synthesis of metal oxide nanoparticles because size and morphology can be tuned by minute control of the reaction variables. We synthesized CoO nanooctahedra with diameters of ∼48 nm and a narrow size distribution. Full control over nanoparticle size and morphology could be obtained by controlling the reaction time, surfactant ratio, and reactant concentrations. We show that the particle size does not increase monotonically with time or surfactant concentration but passes through minima or maxima. We unravel the critical role of the surfactants in nucleation and growth and rationalize the observed experimental trends in accordance with simulation experiments. The as-synthesized CoO nanooctahedra exhibit superior electrocatalytic activity with long-term stability during oxygen evolution. The morphology of the CoO particles controls the electrocatalytic reaction through the distinct surface sites involved in the oxygen evolution reaction.

A large amount of zeolite structures are still not synthetically available or not available in the form of aluminosilicate currently. Despite significant progress in the development of predictive concepts for zeolite synthesis, accessing some of these new materials is still challenging. One example is the IWR structure as well. Despite successful synthesis of Ge-based IWR zeolites, direct synthesis of aluminosilicate IWR zeolite is still not successful. In this report we show how a suitable organic structure directing agent (OSDA), through modeling of an OSDA/zeolite cage interaction, could access directly the aluminum-containing IWR structure (denoted as COE-6), which might allow access to new classes of materials and thus open opportunities in valuable chemical applications. The experimental results reveal that the COE-6 zeolites with a SiO 2 /Al 2 O 3 ratio as low as 30 could be obtained. Very interestingly, the COE-6 zeolite has much higher hydrothermal and thermal stabilities than those of the conventional Ge-Al-IWR zeolite. In methanol-to-propylene (MTP) reaction, the COE-6 zeolite exhibits excellent selectivity for propylene, offering a potential catalyst for MTP reaction in the future.

Controlling the morphology of noble-metal nanoparticles is mandatory to tune specific properties such as catalytic and optical behavior. Heterodimers consisting of two noble metals have been synthesized, so far mostly in aqueous media using selective surfactants or chemical etching strategies. We report a facile synthesis for Au@Pd and Pd@Au heterodimer nanoparticles (NPs) with morphologies ranging from segregated domains (heteroparticles) to core-shell structures by applying a seed-mediated growth process with Au and Pd seed nanoparticles in 1-octadecene (ODE), which is a high-boiling organic solvent. The as-synthesized oleylamine (OAm) functionalized Au NPs led to the formation of OAm-Au@Pd heteroparticles with a "windmill" morphology, having an Au core and Pd "blades". The multiply twinned structure of the Au seed particles (⌀ ≈ 9-11 nm) is associated with a reduced barrier for heterogeneous nucleation. This leads to island growth of bimetallic Au@Pd heteroparticles with less-regular morphologies. The reaction process can be controlled by tuning the surface chemistry with organic ligands. Functionalization of Au NPs (Ø ≈ 9-11 nm) with 1-octadecanethiol (ODT) led to the formation of ODT-Au@Pd NPs with a closed Pd shell through a strong ligand-metal binding, which is accompanied by a redistribution of the electron density. Experiments with varied Pd content revealed surface epitaxial growth of Pd on Au. For OAm-Pd and ODT-Pd seed particles, faceted, Au-rich domain NPs and impeded core-shell NPs were obtained, respectively. This is related to the high surface energy of the small Pd seed particles (⌀ ≈ 5-7 nm). The metal distribution of all bimetallic NPs was analyzed by extended (aberration-corrected) transmission electron microscopy (HR-TEM, HAADF-STEM, EDX mapping, ED). The Au and Pd NPs, as well as the ODT-Au@Pd and OAm-Pd@Au heteroparticles, catalyze the reduction of 4-nitrophenol to 4-aminophenol with borohydride. The catalytic activity is dictated by the particle structure. OAm-Au@Pd heteroparticles with faceted Au domains had the highest activity because of a mixed Au-Pd surface structure, while ODT-Au@Pd NPs, where the active Au core is covered by a Pd shell, had the lowest activity.

Blue-colored molybdenum oxide nitrides of the Mo 2 (O,N,□) 5 type were synthesized by direct nitridation of commercially available molybdenum trioxide with a mixture of gaseous ammonia and oxygen. Chemical composition, crystal structure, and stability of the obtained and hitherto unknown compounds are studied extensively. The average oxidation state of +5 for molybdenum is proven by Mo K near-edge X-ray absorption spectroscopy; the magnetic behavior is in agreement with compounds exhibiting Mo V O 6 units. The new materials are stable up to ∼773 K in an inert gas atmosphere. At higher temperatures, decomposition is observed. X-ray and neutron powder diffraction, electron diffraction, and high-resolution transmission electron microscopy reveal the structure to be related to VNb 9 O 24.9 -type phases, however, with severe disorder hampering full structure determination. Still, the results demonstrate the possibility of a future synthesis of the potential binary oxide Mo 2 O 5 . On the basis of these findings, a tentative suggestion on the crystal structure of the potential compound Mo 2 O 5 , backed by electronic-structure and phonon calculations from first principles, is given.

The absorption of commonly used ferrous iron salts from intestinal segments at neutral to slightly alkaline pH is low, mainly because soluble ferrous iron is easily oxidized to poorly soluble ferric iron and because ferrous iron, but not ferric iron, is carried by the divalent metal transporter DMT-1. Moreover, ferrous iron frequently causes gastrointestinal side effects. Iron hydroxide nanoparticles with neutral and hydrophilic carbohydrate shells are alternatively used to ferrous salts. In these formulations gastrointestinal side effects are rare because hundreds of ferric iron atoms are safely packed in nanoscaled cores surrounded by the solubilizing shell; nevertheless, iron bioavailability is even worse compared to ferrous salts. In this study the cell uptake of iron hydroxide and iron oxide nanoparticles (FeONP) with negatively charged shells of different chemical types and sizes was compared to the uptake of those with neutral hydrophilic shells, ferrous sulfate and ferric chloride. The nanoparticle uptake was measured in Caco-2 cells with the iron detecting ferrozine method and visualized by transmission electron microscopy. The toxicity was evaluated using the MTT assay. For nanoparticles with a negatively charged shell the iron uptake was about 40 times higher compared to those with neutral hydrophilic carbohydrate shell or ferric chloride and in the same range as ferrous sulfate. However, in contrast to ferrous sulfate, nanoparticles with negatively charged shells showed no toxicity. Two different uptake mechanisms were proposed: diffusion for hydroxide nanoparticles with neutral hydrophilic shell and adsorptive endocytosis for nanoparticles with negatively charged shells. It needs to be determined whether iron hydroxide nanoparticles with negatively charged shells also show improved bioavailability in iron-deficient patients compared to iron hydroxide nanoparticles with a neutral hydrophilic shell, which exist in the market today.

Understanding how solids form is a challenging task, and few strategies allow for elucidation of reaction pathways that are useful for designing the synthesis of solids. Here, we report a powerful solution-mediated approach for formation of nanocrystals of the thermoelectrically promising FeSb(2) that uses activated metal nanoparticles as precursors. The small particle size of the reactants ensures minimum diffusion paths, low activation barriers, and low reaction temperatures, thereby eliminating solid-solid diffusion as the rate-limiting step in conventional bulk-scale solid-state synthesis. A time- and temperature-dependent study of formation of nanoparticular FeSb(2) by X-ray powder diffraction and iron-57 Mössbauer spectroscopy showed the incipient formation of the binary phase in the temperature range of 200-250 °C.

The preparation of nanoengineered materials with controlled nanostructures, for example, with an anisotropic phase segregated structure or a regular periodicity rather than with a broad range of interparticle distances, has remained a synthetic challenge for intermetallics. Artificially structured materials, including multilayers, amorphous alloys, quasicrystals, metastable crystalline alloys, or granular metals, are mostly prepared using physical gas phase procedures. We report a novel, powerful solution-mediated approach for the formation of nanoparticular binary antimonides based on presynthesized antimony nanoparticles. The transition metal antimonides M-Sb (M = Co, Ni, Cu(2), Zn) were obtained with sizes ranging from 20 and 60 nm. Through careful control of the reaction conditions, single-phase nanoparticular antimonides were synthesized. The nanophases were investigated by powder X-ray diffraction and (high resolution) electron microscopy. The approach is based on activated metal nanoparticles as precursors for the synthesis of the intermetallic compounds. X-ray powder diffraction studies of reaction intermediates allowed monitoring of the reaction kinetics. The small particle size of the reactants ensures short diffusion paths, low activation barriers, and low reaction temperatures, thereby eliminating solid-solid diffusion as the rate-limiting step in conventional bulk-scale solid-state synthesis., (© 2011 American Chemical Society)

In this study, electrostatic self-assembly of different polystyrene sulfonates and a set of tetravalent cationic porphyrins is investigated. It is shown that association of linear polystyrene sulfonates of different molar masses yields finite size nanoscale assemblies that are stable in aqueous solution. Aggregates are compared to the ones of cylindrical brushes, revealing that both form assemblies in the 100 nm range with the charge ratio (molar ratio of porphyrin charges to polyelectrolyte charges) being determining, while the morphology of the resulting network-like assemblies is different for both polyelectrolyte architectures. For the smallest 8k polystyrene sulfonate, in addition, stoichiometric conditions differ. The influence of the molecular porphyrin structure was investigated by comparing meso-tetrakis(4-(trimethyl-ammonium)phenyl)porphyrin (TAPP) with its Cu(II) and Zn(II) loaded analogues and meso-tetrakis(4-N-methylpyridinium)porphyrin (TMPyP), revealing differences in stacking tendency and geometry. Additionally, the TMPyP accumulates more in the inside of the brush than the other porphyrins, likely due to the different position of its charged groups. The supramolecular nanostructures formed were characterized by UV-vis spectroscopy, light scattering, atomic force microscopy, cryo transmission electron microscopy, and small-angle neutron scattering. Results may build a valuable basis for the use of polyelectrolyte-porphyrin assemblies in medicine, catalysis, or energy conversion., (© 2011 American Chemical Society)

In nature, mineralization of hard tissues occurs due to the synergistic effect of components present in the organic matrix of these tissues, with templating and catalytic effects. In Suberites domuncula, a well-studied example of the class of demosponges, silica formation is mediated and templated by an axial proteinaceous filament with silicatein-α, one of the main components. But so far, the effect of other organic constituents from the proteinaceous filament on the catalytic effect of silicatein-α has not been studied in detail. Here we describe the synthesis of core-shell TiO(2)@SiO(2) and TiO(2)@ZrO(2) nanofibers via grafting of silicatein-α onto a TiO(2) nanowire backbone followed by a coassembly of silintaphin-1 through its specifically interacting domains. We show for the first time a linker-free, one-step funtionalization of metal oxides with silicatein-α using glutamate tag. In the presence of silintaphin-1 silicatein-α facilitates the formation of a dense layer of SiO(2) or ZrO(2) on the TiO(2)@protein backbone template. The immobilization of silicatein-α onto TiO(2) probes was characterized by atomic force microscopy (AFM), optical light microscopy, and high-resolution transmission electron microscopy (HRTEM). The coassembly of silicatein-α and silintaphin-1 may contribute to biomimetic approaches that pursue a controlled formation of patterned biosilica-based biomaterials.

A discotic polycyclic aromatic hydrocarbon, hexa-peri-hexabenzocoronene, was oriented by slow cooling from the isotropic phase on a water surface as a film. For melt processing at low temperatures, an HBC derivative with long swallow-tailed alkyl side chains was chosen. The supramolecular organization in the resulting thin layer was investigated by electron microscopy. In high-resolution mode, the structural study showed large domains in which the columnar structures were oriented uniaxially with an edge-on arrangement of the hydrophobic molecules. The length of the stacks exceeded several hundred nanometers without obvious defects. The small-area analysis by TEM allowed the direct visualization of individual packed molecules. Electron diffraction revealed a high in-plane order of the columnar superstructures in which the discs were tilted by ca. 40° with respect to the stacking direction. This is the first example of a discotic system melt processed on the water surface yielding a pronounced order.

A major drawback in the application of layered chalcogenide nanoparticles/tubes is their inertness to chemical and biological modification and functionalization. Their potential use in composite materials might be greatly enhanced by improving the chalcogenide/matrix interface bonding. A novel modification strategy for layered chalcogenide nanoparticles based on the chalcophilic affinity of metals and the chelating terpyridine is reported. The terpyridine anchor group can be conjugated to fluorescent tags or hydrophilic/hydrophobic groups that confer solubility in various solvents to the otherwise insoluble chalcogenide nanoparticles. The functionalized particles are characterized using TEM/HRTEM, optical and vibrational spectroscopy, and confocal laser scanning microscopy.

Metal and metal oxide nanocrystals have sparked great interest due to their excellent catalytic, magnetic, and electronic properties. Particularly, the integration of metallic nanocrystals and one-dimensional (1D) electronically conducting carbons to form metal-carbon hybrids can lead to enhanced physical and chemical properties or even the creation of new properties with respect to single component materials. However, direct access to thermally stable and structurally ordered 1D metal-carbon hybrids remains a primary challenge. We report an in situ fabrication of Co(3)O(4) or Pt nanocrystals incorporated into 1D nanoporous carbons (NPCs) via an organometallic precursor-controlled thermolysis approach. The AB(2)-type (one diene and two dienophile) 3,4-bis(4-dodecynylphenyl)-substituted cyclopentadienone and its relevant cobalt or platinum complex are first impregnated into the nanochannels of AAO (anodic alumina oxide) membranes. The intermolecular Diels-Alder reaction of these precursor molecules affords the formation of cobalt or platinum functionalized polyphenylene skeletons. Subsequent thermolysis transforms the polyphenylene backbones into 1D nanoporous carbonaceous frameworks, while the metallic moieties are reduced into Co or Pt nanocrystals, respectively. After removal of the AAO template, 1D NPCs/Co(3)O(4) or NPCs/Pt are obtained, for which structural characterizations reveal that high-quality Co(3)O(4) or Pt nanocrystals are distributed homogeneously within carbon frameworks. These unique 1D metal-carbon hybrids exhibit a promising potential in electrochemical energy storage. NPCs/Co(3)O(4) is evaluated as an electrode material in a supercapacitor, for which Co(3)O(4) nanocrystals contribute an exceptionally high gravimetric capacitance value of 1066 F g(-1). NPCs/Pt is applied as an electrocatalyst showing excellent catalytic efficiency toward methanol oxidation in comparison to commercial E-TEK (Pt/C) catalyst.

Engineering materials with specific physical properties have recently focused on the effect of nanoscopic inhomogeneities at the 10 nm scale. Such features are expected to scatter medium- and long-wavelength phonons thereby lowering the thermal conductivity of the system. Low thermal conductivity is a prerequisite for effective thermoelectric materials, and the challenge is to limit the transport of heat by phonons, without simultaneously decreasing charge transport. A solution-phase technique was devised for synthesis of thermoelectric "Zn(4)Sb(3)" nanocrystals as a precursor for phase segregation into ZnSb and a new Zn-Sb intermetallic phase, Zn(1+delta)Sb, in a peritectoid reaction. Our approach uses activated metal nanoparticles as precursors for the synthesis of this intermetallic compound. The small particle size of the reactants ensures minimum diffusion paths, low activation barriers, and low reaction temperatures, thereby eliminating solid-solid diffusion as the rate-limiting step in conventional bulk-scale solid-state synthesis. Both phases were identified and structurally characterized by automated electron diffraction tomography combined with precession electron diffraction. An ab initio structure solution based on electron diffraction data revealed two different phases. The new pseudo-hexagonal phase, Zn(1+delta)Sb, was identified and classified within the structural diversity of the Zn-Sb phase diagram.

The association of poly(ethylene oxide-b-methacrylic acid) and poly(amidoamine) dendrimers was examined by dynamic light scattering and small angle neutron scattering. With increasing amounts of the G4 dendrimer as the counterion, the size of the assemblies increases until it reaches a hydrodynamic radius of about 70 nm. The structure is consistent with poly(methyl methacrylate) (PMAA) chains closely aggregating with the dendrimers at low dendrimer amounts and volume-filling PMAA blocks at higher dendrimer contents. Similar behavior was observed for G4 and G2 dendrimers, while smaller G0 molecules showed an opposite dependence. The results represent an example of finite size assemblies formed by "electrostatic self-assembly" that are stable in aqueous solution and represent equilibrium structures, the structure and size of which can be tuned through the building units, loading ratio, and pH.

An automated synthesis protocol has been developed for the preparation of oligo(p-benzamide)s on solid support using a commercial peptide synthesizer employing a variation of standard Fmoc chemistry. Bis(trichloromethyl carbonate) in NMP was used to activate the aromatic carboxylic acids for acylation of secondary aromatic amines on solid support. N-Protected hepta(p-benzamide) was automatically prepared on solid support and manually converted to a solid supported block co-oligomer by attaching a poly(ethylene glycol) chain. Cleavage from the support could be achieved with minimal loss of the p-methoxybenzyl N-protective group. While the N-protected block co-oligomer was molecularly dissolved in nonpolar organic solvents, the N-deprotected block co-oligomer adopted a rod-coil conformation and showed strong aggregation as evidenced by gel permeation chromatography and transmission electron microscopy. Rigid rodlike aggregates could be observed in chloroform, toluene, as well as water.

Functionalized, monocrystalline rutile TiO2 nanorods were prepared from TiCl4 in aqueous solution under acidic conditions in the presence of dopamine, followed by aging and hydrothermal treatment at 150 degrees C. The surface-bound organic ligand controls the morphology as well as the crystallinity and the phase selection of TiO2. The presence of monocrystalline rutile TiO2 was confirmed by X-ray powder diffraction and HRTEM investigations. The as-prepared nanorods are soluble in water at pH <3. The surface functionalization was analyzed by IR and 1H NMR, confirming the presence of dopamine on the surface. The surface amine groups can be tailored further with functional molecules such as dyes. Confocal laser scanning microscopy (CLSM) was used to characterize the binding of the fluorescent dye 4-chloro-7-nitrobenzofurazan (NBD) to the functionalized surface of the TiO2 nanorods.

The crystalline to liquid crystalline (Cr-LC) phase transition in thin films of zone-cast hexa-peri-hexabenzocoronene sixfold substituted with dodecyl side chains (HBC-C12H25) has been studied in detail using grazing incidence X-ray diffraction (GID), electron diffraction (ED), and variable angle spectroscopic ellipsometry (VASE), When heating the material, a first minor transition is observed around 42 degrees C. This change is attributed to alterations of the crystalline alkyl chain packing, which only slightly changes the electronic properties of the material. At higher temperatures of about 90 degrees C, but still significantly below the previously reported transition temperature in bulk, the Cr-LC transition is observed. An accompanying large increase in optical anisotropy is compatible with the X-ray data, showing a transition from the as-cast herringbone-like crystalline state to a highly ordered discotic hexagonal columnar LC phase. The structural transition has the macroscopic effect of increasing the film thickness. The high structural order of the as-cast low-temperature phase is only partly recovered after cooling, and the phase transition exhibits a large hysteresis. From the ellipsometry data, the dielectric tensor of HBC-C12H25 was refined to unprecedented detail.

Novel naphthalocyanine (Nc) nanotubes with special wall structures were fabricated by a template method using Nc molecules as building blocks. Thermal stabilization of the ordered columnar structures of the tetrakis(tert-butyl)naphthalocyanine (Ni-BNc) molecules, induced from the pi-pi interactions in the nanoscale channels of an alumina template, resulted in Nc nanotubes with walls consisting of well-ordered Nc molecular disks. Further thermal treatment of Ni-BNc at 600 degrees C produced carbonized Nc nanotubes containing ordered columnar, graphitic wall structures with the graphene disks arranged perpendicular to the tube axis. These nanotubes may be useful for extending the application of Nc molecules for nanodevice fabrication.

We report on the preparation and structural characterization of CdSe nanocrystals, which are covered by a multishell structure from CdS and ZnS. By using the newly developed successive ion layer adhesion and reaction (SILAR) technique, we could gradually change the shell composition from CdS to ZnS in the radial direction. Because of the stepwise adjustment of the lattice parameters in the radial direction, the resulting nanocrystals show a high crystallinity and are almost perfectly spherical, as was investigated by X-ray diffraction and electron microscopy. Also, due to the radial increase of the respective valence- and conduction-band offsets, the nanocrystals are well electronically passivated. This leads to a high fluorescence quantum yield of 70-85% for the amine terminated multishell particles in organic solvents and a quantum yield of up to 50% for mercapto propionic acid-covered particles in water. Finally, we present experimental results that substantiate the superior photochemical and colloidal stability of the multishell particles.