Search

Point defect chemistry strongly affects the fundamental properties of materials and has a decisive impact on device performance. The Group-V dopant is prominent acceptor species with high hole concentration in CdTe; however, its local atomic structure is still not clear owing to difficulties in definitive measurements and discrepancies between experimental observations and theoretical models. Herein, we report on direct observation of the local structure for the As dopant in CdTe single crystals by the X-ray fluorescence holography (XFH) technique, which is a powerful tool to visualize three-dimensional atomic configurations around a specific element. The XFH result shows the As substituting on both Cd (As Cd ) and Te (As Te ) sites. Although As Te has been well known as a shallow acceptor, As Cd has not attracted much attention and been discussed so far. Our results provide new insights into point defects by expanding the experimental XFH study in combination with theoretical first-principles studies in II-VI semiconductors.

We report the first synthesis of solvent-free pentacene fluids at room temperature together with observation of singlet fission (SF). Three pentacenes with different number of ethylene glycol (EG) side chains ( n ) were employed (denoted as (EG) n -Pc-(EG) n : n = 2, 3, and 4). The morphologies of these pentacenes largely depend on the lengths of EG chains ( n ). (EG) 3 -Pc-(EG) 3 and (EG) 4 -Pc-(EG) 4 indicate fluid compounds at room temperature, whereas (EG) 2 -Pc-(EG) 2 is a solid compound. Microscopic clustering with short-range interactions between pentacene chromophores was confirmed in X-ray diffraction profiles of solvent-free fluids. Such a structural trend is an important origin of SF and consistent with the steady-state spectroscopic results. To one's surprise, femtosecond transient absorption spectroscopy demonstrated that SF occurred in thin films prepared from solvent-free fluids of (EG) 3 -Pc-(EG) 3 and (EG) 4 -Pc-(EG) 4 in spite of such excessive EG chains.

Research on tin-lead (SnPb) perovskite solar cells (PSCs) has gained popularity in recent years because of their low band gap, which could be applied to tandem solar cells. However, most of the work is based on inverted PSCs using PEDOT:PSS as the hole-transport layer as normal-structure PSCs show lower efficiency. In this work, the reason behind the low efficiency of normal-structure SnPb PSCs is elucidated and surface passivation has been tested as a method to overcome the problem. In the case of normal PSCs, at the interface between the titania layer and SnPb perovskite, there are many carrier traps observed originating from Ti-O-Sn bonds. In order to avoid the direct contact between titania and the SnPb perovskite layer, the titania surface is passivated with carboxylic acid C 60 resulting in an efficiency increase from 5.14 to 7.91%. This will provide a direction of enhancing the efficiency of the normal-structure SnPb PSCs through heterojunction engineering.

Lead-free tin perovskite solar cells (PSCs) show the most promise to replace the more toxic lead-based perovskite solar cells. However, the efficiency is significantly less than that of lead-based PSCs as a result of low open-circuit voltage. This is due to the tendency of Sn 2+ to oxidize into Sn 4+ in the presence of air together with the formation of defects and traps caused by the fast crystallization of tin perovskite materials. Here, post-treatment of the tin perovskite layer with edamine Lewis base to suppress the recombination reaction in tin halide PSCs results in efficiencies higher than 10%, which is the highest reported efficiency to date for pure tin halide PSCs. The X-ray photoelectron spectroscopy data suggest that the recombination reaction originates from the nonstoichiometric Sn:I ratio rather than the Sn 4+ :Sn 2+ ratio. The amine group in edamine bonded the undercoordinated tin, passivating the dangling bonds and defects, resulting in suppressed charge carrier recombination.

In the composition of Q 0.1 (FA 0.75 MA 0.25 ) 0.9 SnI 3 , Q is replaced with Na + , K + , Cs + , ethylammonium + (EA + ), and butylammonium + (BA + ), respectively, and the relationship between actually measured lattice strain and photovoltaic performances is discussed. The lattice strain evaluated by the Williamson-hall plot of X-ray diffraction data decreased as the tolerance factor was close to one. The efficiency of the Sn-perovskite solar cell was enhanced as the lattice strain decreased. Among them, EA 0.1 (FA 0.75 MA 0.25 ) 0.9 SnI 3 having lowest lattice strain gave the best result of 5.41%. Because the carrier mobility increased with a decrease in the lattice strain, these lattice strains would disturb carrier mobility and decrease the solar cell efficiency. Finally, the results that the efficiency of the SnGe-perovskite solar cells was gradually enhanced from 6.42 to 7.60% during storage, was explained by the lattice strain relaxation during the storage.

Frequently observed high V oc loss in tin-lead mixed perovskite solar cells is considered to be one of the serious bottle-necks in spite of the high attainable Jsc due to wide wavelength photon harvesting. An amicable solution to minimize the V oc loss up to 0.50 V has been demonstrated by introducing an n-type interface with spike structure between the absorber and electron transport layer inspired by highly efficient Cu(In,Ga)Se 2 solar cells. Introduction of a conduction band offset of ∼0.15 eV with a thin phenyl-C61-butyric acid methyl ester layer (∼25 nm) on the top of perovskite absorber resulted into improved V oc of 0.75 V leading to best power conversion efficiency of 17.6%. This enhancement is attributed to the facile charge flow at the interface owing to the reduction of interfacial traps and carrier recombination with spike structure as evidenced by time-resolved photoluminescence, nanosecond transient absorption, and electrochemical impedance spectroscopy measurements.

It is expected that single-walled carbon nanotubes (SWCNTs) have high thermal conductivity along the tube axis and that the thermal conductivities depend on their structure, such as length, diameter, chirality ( n , m ), and so forth. Although many experimental measurements of the thermal conductivity have been reported, the SWCNT structure was not characterized sufficiently. In particular, the chirality was not assigned, and it was not confirmed whether SWCNT was isolated or not (bundled with multiplicate SWCNTs). Therefore, measured values widely vary (10 1 to 10 4 W/(m·K)) so far. Here, we measured the thermal conductivity of chirality-assigned SWCNTs, which were individually suspended, by using photoluminescence (PL) imaging spectroscopy. The temperature distribution along the tube axis was obtained, and the temperature dependence of the thermal conductivity was measured in a wide-temperature range (from 350 to 1000 K). For (9, 8) SWCNTs with 10-12 μm in length, the thermal conductivity was 1166 ± 243 W/(m·K) at 400 K. The proposed PL imaging spectroscopy enables to measure the thermal conductivity of SWCNTs with high precision and without any contacts, and it is an effective method in the temperature distribution measurements of nanomaterials., Competing Interests: The authors declare no competing financial interest.

Lead-based perovskite solar cells have gained ground in recent years, showing efficiency as high as 20%, which is on par with that of silicon solar cells. However, the toxicity of lead makes it a nonideal candidate for use in solar cells. Alternatively, tin-based perovskites have been proposed because of their nontoxic nature and abundance. Unfortunately, these solar cells suffer from low efficiency and stability. Here, we propose a new type of perovskite material based on mixed tin and germanium. The material showed a band gap around 1.4-1.5 eV as measured from photoacoustic spectroscopy, which is ideal from the perspective of solar cells. In a solar cell device with inverted planar structure, pure tin perovskite solar cell showed a moderate efficiency of 3.31%. With 5% doping of germanium into the perovskite, the efficiency improved up to 4.48% (6.90% after 72 h) when measured in air without encapsulation.

Photoexcited electron injection dynamics from CsPbI 3 quantum dots (QDs) to wide gap metal oxides are studied by transient absorption spectroscopy. Experimental results show under a low excitation intensity that ∼99% of the photoexcited electrons in CsPbI 3 QDs can be injected into TiO 2 with a size-dependent rate ranging from 1.30 × 10 10 to 2.10 × 10 10 s -1 , which is also ∼2.5 times faster than that in the case of ZnO. A demonstration QD-sensitized solar cell based on a CsPbI 3 /TiO 2 electrode is fabricated that delivers a power conversion efficiency of 5%.

Organic-inorganic hybrid perovskite solar cells have demonstrated unprecedented high power conversion efficiencies in the past few years. Now, the universal instability of the perovskites has become the main barrier for this kind of solar cells to realize commercialization. This situation can be even worse for those tin-based perovskites, especially for CsSnI 3 , because upon exposure to ambient atmosphere the desired black orthorhombic phase CsSnI 3 would promptly lose single crystallinity and degrade to the inactive yellow phase, followed by irreversible oxidation into metallic Cs 2 SnI 6 . By alloying CsSnI 3 with CsPbI 3 , we herein report the synthesis of alloyed perovskite quantum dot (QD), CsSn 1-x Pb x I 3 , which not only can be phase-stable for months in purified colloidal solution but also remains intact even directly exposed to ambient air, far superior to both of its parent CsSnI 3 and CsPbI 3 QDs. Ultrafast transient absorption spectroscopy studies reveal that the photoexcited electrons in the alloyed QDs can be injected into TiO 2 nanocrystals at a fast rate of 1.12 × 10 11 s -1 , which enables a high photocurrent generation in solar cells.

Perovskite quantum dots (QDs) as a new type of colloidal nanocrystals have gained significant attention for both fundamental research and commercial applications owing to their appealing optoelectronic properties and excellent chemical processability. For their wide range of potential applications, synthesizing colloidal QDs with high crystal quality is of crucial importance. However, like most common QD systems such as CdSe and PbS, those reported perovskite QDs still suffer from a certain density of trapping defects, giving rise to detrimental nonradiative recombination centers and thus quenching luminescence. In this paper, we show that a high room-temperature photoluminescence quantum yield of up to 100% can be obtained in CsPbI 3 perovskite QDs, signifying the achievement of almost complete elimination of the trapping defects. This is realized with our improved synthetic protocol that involves introducing organolead compound trioctylphosphine-PbI 2 (TOP-PbI 2 ) as the reactive precursor, which also leads to a significantly improved stability for the resulting CsPbI 3 QD solutions. Ultrafast kinetic analysis with time-resolved transient absorption spectroscopy evidence the negligible electron or hole-trapping pathways in our QDs, which explains such a high quantum efficiency. We expect the successful synthesis of the "ideal" perovskite QDs will exert profound influence on their applications to both QD-based light-harvesting and -emitting devices.

We report photovoltaic performances of all-solid state Sn/Pb halide-based perovskite solar cells. The cell has the following composition: F-doped SnO2 layered glass/compact titania layer/porous titania layer/CH3NH3SnxPb(1-x)I3/regioregular poly(3-hexylthiophene-2,5-diyl). Sn halide perovskite itself did not show photovoltaic properties. Photovoltaic properties were observed when PbI2 was added in SnI2. The best performance was obtained by using CH3NH3Sn0.5Pb0.5I3 perovskite. 4.18% efficiency with open circuit voltage 0.42 V, fill factor 0.50, and short circuit current 20.04 mA/cm(2) are reported. The edge of the incident photon to current efficiency curve reached 1060 nm, which was 260 nm red-shifted compared with that of CH3NH3PbI3 perovskite solar cells.

Optically actuated shape recovery materials receive much interest because of their great ability to control the creation of mechanical motion remotely and precisely. An infrared (IR) triggered actuator based on shape recovery was fabricated using polyurethane (TPU) incorporated by sulfonated reduced graphene oxide (SRGO)/sulfonated carbon nanotube (SCNT) hybrid nanofillers. Interconnected SRGO/SCNT hybrid nanofillers at a low weight loading of 1% dispersed in TPU showed good IR absorption and improved the crystallization of soft segments for a large shape deformation. The output force, energy density and recovery time of IR-triggered actuators were dependent on weight ratios of SRGO to SCNT (SRGO:SCNT). TPU nanocomposites filled by a hybrid nanofiller with SRGO:SCNT of 3:1 showed the maximum IR-actuated stress recovery of lifting a 107.6 g weight up 4.7 cm in 18 s. The stress recovery delivered a high energy density of 0.63 J/g and shape recovery force up to 1.2 MPa due to high thermal conductivity (1.473 W/mK) and Young's modulus of 23.4 MPa. Results indicate that a trade-off between the stiffness and efficient heat transfer controlled by synergistic effect between SRGO and SCNT is critical for high mechanical power output of IR-triggered actuators. IR-actuated shape recovery of SRGO/SCNT/TPU nanocomposites combining high energy density and output forces can be further developed for advanced optomechanical systems.

G protein-coupled receptor (GPCR) kinases (GRKs) were discovered by virtue of their ability to phosphorylate activated GPCRs. They constitute a branch of the AGC kinase superfamily, but their mechanism of activation is largely unknown. To initiate a study of GRK2 activation, we sought to identify sites on GRK2 remote from the active site that are involved in interactions with their substrate receptors. Using the atomic structure of GRK2 in complex with Gbetagamma as a guide, we predicted that residues on the surface of the kinase domain that face the cell membrane would interact with the intracellular loops and carboxyl-terminal tail of the GPCR. Our study focused on two regions: the kinase large lobe and an extension of the kinase domain known as the C-tail. Residues in the GRK2 large lobe whose side chains are solvent exposed and facing the membrane were targeted for mutagenesis. Residues in the C-tail of GRK2, although not ordered in the crystal structure, were also targeted because this region has been implicated in receptor binding and in the regulation of AGC kinase activity. Four substitutions out of 20, all within or adjacent to the C-tail, resulted in significant deficiencies in the ability of the enzyme to phosphorylate two different GPCRS: rhodopsin, and the beta(2)-adrenergic receptor. The mutant exhibiting the most dramatic impairment, V477D, also showed significant defects in phosphorylation of nonreceptor substrates. Interestingly, Michaelis-Menten kinetics suggested that V477D had a 12-fold lower k(cat), but no changes in K(M), suggesting a defect in acquisition or stabilization of the closed state of the kinase domain. V477D was also resistant to activation by agonist-treated beta(2)AR. Therefore, Val477 and other residues in the C-tail are expected to play a role in the activation of GRK2 by GPCRs.

Au/zeolite catalysts prepared with a deposition-precipitation method were characterized with quick XAFS (QXAFS) in combination with IR. The data were correlated with the catalytic performance in the CO-O(2) reaction conducted at 273 K. On the basis of the XANES analysis of Au loaded on H-Y, the deposited Au(2)O(3) was observed at the initial stage. The transformation of Au(2)O(3) to form metal Au clusters was observed at 473 K in a H(2) atmosphere. The fact was supported by the IR measurement of adsorbed CO and the subsequent reaction with O(2). Detailed clustering process of Au supported catalysts could be directly followed by EXAFS analysis. The growth of metal Au proceeded via the formation of a Au(55) cluster at 473 K. Then it agglomerated to give metal Au with diameter of 2 nm at 723 K. The addition of H(2) was effective to retard the sintering of Au clusters. A similar phenomenon was observed over Au loaded on USY zeolite. In marked contrast to the H-Y and USY supports, significantly agglomerated Au particles generated on Na-Y zeolite, indicating the importance of the presence of acid sites in keeping the Au clusters with highly dispersed form. The performance of 5 wt % Au loaded on H-Y and USY in the CO-O(2) reaction was remarkably sensitive to the pretreatment temperature and the gas atmosphere. The catalyst pretreated with hydrogen showed a two-spike pattern with respect to the pretreatment temperature. Namely, the optimum activity was observed after the pretreatment at 373 and 723 K, where the temperatures corresponded to the generation of Au(2)O(3) and metal Au clusters with 2 nm diameter as evidenced by QXAFS analysis, respectively. The reason for enhancement of the activity of Au/H-Y by the addition of H(2) in the pretreatment step could be attributed to the formation of metal Au with appropriate size. In contrast to the H-Y and USY support, Au loaded on Na-Y prepared under the same condition was almost inactive in the reaction due to the formation of aggregated metal Au.

Three kinds of copolymers of N-isopropylacrylamide (NIPAM) with the same conformational transition temperature and varying transition endotherms were synthesized with N-acryloylpyrrolidine (APr), N,N-dimethylacrylamide (DMAM), and N-isopropylmethacrylamide (NIPMAM) as the comonomers. Two dodecyl groups were incorporated into the termini of these copolymers as an anchor for the fixation to a liposomal membrane. Egg yolk phosphatidylcholine liposomes having these copolymers were prepared and their temperature-sensitive contents release and association properties were investigated. While these copolymer exhibited a conformational transition at ca. 40 degrees C, DeltaH for the transition increased in the order of poly(APr-co-NIPAM) < poly(DMAM-co-NIPAM) < poly(NIPMAM-co-NIPAM). The liposomes containing poly(NIPMAM-co-NIPAM) showed a drastic release enhancement of entrapped calcein above the transition temperature, whereas the liposomes with poly(DMAM-co-NIPAM) and those with poly(APr-co-NIPAM) exhibited moderate and slight enhancement of calcein release above that temperature, respectively. On the contrary, the liposomes containing poly(APr-co-NIPAM) showed significant aggregation above the transition temperature, but the aggregation was hardly observed for the liposomes having poly(NIPMAM-co-NIPAM), indicating that poly(APr-co-NIPAM) more efficiently made the liposome surface hydrophobic. Thus, we concluded that the copolymer with a large DeltaH is suitable for obtaining functional liposomes with a temperature-sensitive contents release property, whereas the copolymer with a small DeltaH is appropriate for preparing functional liposomes with a temperature-sensitive surface property.

The inhibitory effects of C-2 epimeric isomers of (-)-epigallocatechin-3-O-gallate (EGCG) and two O-methylated EGCG derivatives, (-)-epigallocatechin-3-O-(3-O-methyl)gallate (EGCG3''Me) and (-)-epigallocatechin-3-O-(4-O-methyl)gallate (EGCG4''Me), against oxazolone-induced type IV allergy in male mice were investigated. These compounds exhibited strong antiallergic effects by percutaneous administration at a dose of 0.13 mg/ear. The inhibition rates of (-)-gallocatechin-3-O-gallate (GCG), (-)-gallocatechin-3-O-(3-O-methyl)gallate (GCG3''Me), and (-)-gallocatechin-3-O-(4-O-methyl)gallate (GCG4''Me) on mouse type IV allergy were 52.1, 53.3, and 54.8%, respectively. However, the antiallergic effects were weaker than those of their corresponding original tea catechins (2R,3R type). The inhibition rates of those were 88.0, 73.2, and 77.6%, respectively. For all of the catechins tested, oral administration at a dose of 50 mg/kg body weight significantly suppressed the allergic symptoms. The inhibitory rates varied from 24.0 to 60.6%. No significant differences were observed between the effects of the epimers (2S,3R type) and their corresponding original catechins (2R,3R type). The antiallergic effects of tea catechins and their C-2 epimers observed in this study were dose-dependent. These results suggest that C-2 epimers of tea catechins, which are produced during heat processing at high temperatures, could be disadvantageous for the antiallergic effects on type IV allergy., (Copyright 2004 American Chemical Society)

As a part of synthetic studies on MMP (matrix metalloproteinase)/ADAM (a disintegrin and metalloproteinase) inhibitors, we have preliminarily communicated that azasugar-based compound 1a exhibited a potential inhibitory activity on some metalloprotease-catalyzed proteolytic reactions. To find promising candidates for the topical treatment of psoriasis, we investigated stability in aqueous solution of compound 1a and its derivative 1b and then optimized the P1' substuent (2-5). In the present study, we synthesized novel derivatives of compound 1a and evaluated their inhibitory activity toward MMP-1, -3, and -9, TACE, and HB-EGF shedding, from a viewpoint of versatility of azasugars as a functional scaffold. As a result, it was found that compound 1b demonstrated desirable inhibitory activity as an antipsoriatic agent, and some of the derivatives showed selective inhibitory activity. In addition, it was found that compound 1b exhibited a significant therapeutic effect on a mouse TPA-induced epidermal hyperplasia model. Therefore, compound 1b could become a promising candidate as a practical antipsoriatic agent.

A novel potentiometric method for evaluation of peroxyl radical scavenging activity of flavonoids and plant extracts was developed. The oxidation of potassium iodide (KI) was performed in acetonitrilephosphate buffer (1:1) containing antioxidant using 2,2'-azobis(2-amidinopropane) dihydrochloride as a peroxyl radical generator. The amount of iodine released from KI during a 20-min free radical oxidation was determined quantitatively using an automatic potentiometric titrator with sodium thiosulfate. The radical scavenging activity of the sample was expressed as the inhibition ratio for iodine release of the control group mediated by the radical. The results obtained from some authentic polyphenols correlated well with those of previous reports. This is a simple, time-saving method requiring less than 30 min and is useful in assessing the radical scavenging activity of antioxidants in plant extracts. We describe the radical scavenging activities of various flavonoids including 21 kinds of tea catechins and vegetable extracts by this method.

Phosphonamide-based inhibitors were synthesized and evaluated for the inhibitory activities against the shedding of epidermal growth factors, amphiregulin and heparin-binding EGF-like growth factor, that would participate in the development of psoriasis. All compounds exhibited excellent inhibitory activities for these EGF sheddings; however, they also inhibited matrix metalloproteinases (MMPs). To avoid adverse effects reported by the clinical development of MMP inhibitors, the antedrug concept was introduced. Among the phosphonamide inhibitors, the 2,2,2-trifluoroethyl ester 8d and 2,2-difluoroethyl ester 8c showed rapid decomposition in human plasma, which is an essential property for the antedrug. Topical applications of these compounds significantly suppressed TPA-induced epidermal hyperplasia in murin skin, a model of psoriasis. These results suggested that the phosphonamide-based inhibitors have a therapeutic potential for the treatment of psoriasis as an antedrug application.

A series of phosphonamide-based hydroxamate derivatives were synthesized, and the inhibitory activities were evaluated against various metalloproteinases in order to clarify its selectivity profile. Among the four diastereomeric isomers resulting from the chirality at the C-3 and P atoms, the compound with a (R,R)-configuration both at the C-3 position and the phosphorus atom was found to be potently active, while the other diastereomeric isomers were almost inactive. A number of (R,R)-compounds synthesized here exhibited broad spectrum activities with nanomolar K(i) values against MMP-1, -3, -9, and TACE and also showed nanomolar IC(50) values against HB-EGF shedding in a cell-based inhibition assay. The modeling study using X-ray structure of MMP-3 suggested the possible binding mode of the phosphonamide-based inhibitors.

The inhibitory effects of tea catechins, the O-methylated derivatives of (-)-epigallocatechin-3-O-gallate (EGCG), and the polyphenol extracts from tea leaves (Camellia sinensis L.) on oxazolone-induced type IV allergy in male ICR mice were investigated. Four major tea catechins and two O-methylated derivatives, (-)-epigallocatechin-3-O-(3-O-methyl)gallate (EGCG3' 'Me) and (-)-epigallocatechin-3-O-(4-O-methyl)gallate (EGCG4' 'Me), showed significant inhibitory effects on mouse type IV allergy after a percutaneous administration at a dose of 0.13 mg/ear. Among tea catechins, the compounds including galloyl moieties, such as EGCG and (-)-epicatechin-3-O-gallate (ECG), showed the strongest inhibitory activities on mouse type IV allergy. The inhibitory activities of EGCG3' 'Me and EGCG4' 'Me were higher than that of EGCG at a dose of 0.05 mg/ear. Polyphenol extract from tea leaves of Benihomare cultivar, which includes EGCG3' 'Me, strongly inhibited mouse type IV allergy after percutaneous administration in comparison with that from Yabukita cultivar, which does not include EGCG3' 'Me, at doses of 0.05 and 0.13 mg/ear. EGCG3' 'Me is thought to contribute, at least in part, to the inhibitory ability of Benihomare tea leaves on mouse type IV allergy. EGCG and the polyphenol extracts from Benihomare and Yabukita tea leaves also inhibited mouse type IV allergy by oral administration at 1 h before the sensitization and at 1 h before the challenge with oxazolone. Therefore, daily intake of tea drinks could have potential to prevent type IV allergy.

Two catechin derivatives (C-1 and C-2) with potent antiallergic activity were isolated from Taiwanese oolong tea by HPLC techniques. From NMR and FAB-MS analyses, the structures of C-1 and C-2 were elucidated as (-)-epigallocatechin 3-O-(3-O-methyl)gallate and (-)-epigallocatechin 3-O-(4-O-methyl)gallate, respectively. The oolong tea leaves contained 0.34% (dry weight) C-1 and 0.20% C-2. Traces of C-2 were detected in only 1 of 15 varieties of green tea tested. C-1 was detected in 13 of 15 green tea varieties; C-1 was most concentrated in tea cultivars classified as Assam hybrids (0. 50-0.82% of dry weight). Quantitative analyses of green tea, oolong tea, and black tea manufactured from same batches of tea leaves showed that neither catechin derivative was produced during the fermentation process. Oral doses of C-1 and C-2 (5-50 mg/kg) significantly inhibited type I allergic (anaphylactic) reactions in mice sensitized with ovalbumin and Freund's incomplete adjuvant. These inhibitory effects exceeded that of the major tea catechin, (-)-epigallocatechin 3-O-gallate, which has known antiallergic properties.

In order to clarify the real ligand structure of L-selectin proposed by Rosen et al., we first synthesized 6-sulfated sLe(x) hexasaccharide ceramide 1, 6'-sulfated sLe(x) hexasaccharide ceramide 2, and 6,6'-disulfated sLe(x) hexasaccharide ceramide 3 and examined their binding avidities for L-selectin. As a result, we found that the 6'-sulfated sLe(x) hexasaccharide ceramides 1-3 have similar binding avidities to L-selectin and their binding to L-selectin appeared somewhat stronger than that of sLe(x). For P-selectin, the sulfated sLe(x) derivatives 1-3 showed a similar avidity to sLe(x). On the other hand, 6-sulfated sLe(x) 2 was recognized to E-selectin and the binding avidity was apparently weak as compared to that of sLe(x) hexasaccharide ceramide. Surprisingly, 6'-sulfated and 6,6'-disulfated sLe(x)s 1 and 3 did not bind to E-selectin at all. We constructed the E-selectin-sLe(x) complex model and investigated the binding mode. Namely, the galactose 6'-position was directed toward the negatively charged residues, Glu80 and Asp100. Our results with E-selectin indicate that the replacement of 6'-OH position from anionic charged group to cationic charged one, e.g., amino groups, could have a marked affect on E-selectin recognition. These results could provide useful information for the drug design of selectin blockers.

As a part of our studies of selectin blockers, we prepared 1-(2-tetradecylhexadecyl)-3'-O-sulfo Le(X) 1 and 1-(2-tetradecylhexadecyl) sLe(X) 2 and examined their inhibitory activities against natural ligand (sLe(X)) binding to E-, P-, and L-selectins. Compounds 1 and 2 were 2 times more potent than the sLe(X) tetrasaccharide toward E-selectin binding and up to 4 times more potent than sLe(X) toward P- and L-selectin binding. Interestingly, compound 1 provided dose-dependent protective effects against an immunoglobulin E-mediated skin reaction in mouse ears. This protective effect was associated with diminished tissue accumulation of neutrophils in the ear (as assessed by myeloperoxidase). These findings indicate that the modification of sLe(X) or 3'-O-sulfo Le(X) with a "branched anchor", a 2-tetradecylhexadecyl group, is useful in the design of a more potent selectin blocker, which has broad inhibitory activities toward all selectins.

As part of our studies of selectin blockers, we prepared 1-deoxy-3'-O-sulfo LeX analogs (1-3), 1-deoxy-3'-O-phosphono LeX analogs (4), and 1-deoxy sLeX analogs (5-7), and examined their inhibitory activities against natural ligand (sLeX) binding to E-selectin, P-selectin, and L-selectin. The 1-deoxy sLeX 5 was up to 20 times more potent an inhibitor than the sLeX tetrasaccharide toward P- and L-selectin binding. This indicates that the modification of the 1 or 2 position of sLeX is useful in the design of a more potent selectin blocker.

A method for the high-sensitivity detection of oligosaccharides by electrospray ionization mass spectrometry (ESI-MS) is reported. The method involves the chemical derivatization with 4-aminobenzoic acid 2-(diethylamino)-ethyl ester (ABDEAE). This derivative, which contains a 2-(diethylamino)ethyl group, having a high proton affinity, enhances the ionization efficiency of analytes in the positive ESI mode. Experiments using maltohexaose as a model oligosaccharide revealed that derivatization with ABDEAE gave a remarkably large increase in molecular ion abundance. Using a mixture of acetonitrile, 2-methoxyethanol, 2-propanol, and water (1:1:1:1 v/v/v/v) as solvent for ESI, ABDEAE-derivatized maltohexaose could be detected at a level of 10 fmol. This represents a 5000-fold improvement in sensitivity over underivatized maltohexaose. ESI tandem mass spectrometry of the ABDEAE-derivatized maltohexaose provides structural information at the low-picomole level. In this spectrum, 1,5X' and 0,2A" series of sequence ions, arising from ring cleavage, were observed as the predominant ions.

The integrin alpha v beta 3 binds promiscuously to cell-adhesive proteins: vitronectin, fibronectin, and several others containing the RGD motif. We have explored molecular recognition by alpha v beta 3 through selection of ligands from large random libraries of peptides displayed on phage. Ligands bound by alpha beta 3 consisted primarily of RGD peptides; however, these peptides showed considerable heterogeneity with respect to the identities of amino acids flanking RGD. The tolerance of alpha v beta 3 for RGD peptides of diverse composition is consistent with its role in vivo as a versatile receptor for RGD-containing extracellular matrix proteins. Peptide ligands for alpha v beta 3 also included a novel binding sequence, identical to a tetrapeptide found in vitronectin, which is a candidate for a synergistic site in this adhesive protein that may act in concert with RGD to promote molecular recognition.

Eight sperm-activating peptides containing a novel amino acid were isolated from the egg jelly of the sea urchin Tripneustes gratilla. Accurate mass measurement of the peptide in FAB mass spectrometry showed that the mass of the novel amino acid residue was 224.978. On the basis of the isotopic ion distribution and the degree of unsaturation, the mass value indicated that the elemental composition of the amino acid residue was C9H8O1N1Br1, suggesting that the novel amino acid was bromophenylalanine. Proton NMR spectroscopy, amino acid analysis, and RP-HPLC with three synthetic isomers of bromophenylalanine demonstrated that o-bromophenylalanine was the novel amino acid. Derivatization of the amino acid with Marfey's reagent, (1-fluoro-2,4-dinitrophen-5-yl)-L-alanine amide (FDAA), further indicated that the amino acid was the L-isomer. In other sperm-activating peptides isolated from the egg jelly of the sea urchin, both m- and p-bromophenylalanines were discovered. The presence of m-bromophenylalanine has not been previously reported in natural products, while p-bromophenylalanine is found in theonellamide F, an antifungal bicyclic peptide from a marine sponge.

Structural modifications of the calcium antagonist fostedil (KB-944) and their coronary vasodilator activity are described. Amidophosphonates 4a-m, lactam amidophosphonates 7a-1, and diamide dilactam 10 were prepared, and their coronary vasodilator activity was assessed in dogs. Many compounds exhibited coronary vasodilator activity superior to that of fostedil. Among them, the 2-oxopyrrolidine derivative 7a was the most effective compound. Its action as a coronary vasodilator was 3 and 2 times more potent than that of fostedil and diltiazem hydrochloride, respectively.

A series of 2-(2-pyridinyl)benzimidazoles was synthesized and evaluated for antiinflammatory activity by the carrageenan-induced rat paw edema assay. Among several active derivatives, 2-(5-ethylpyridin-2-yl)benzimidazole (6) was selected for further study. A comparison of compound 6 with phenylbutazone and tiaramide revealed that 6 possesses stronger activity in acute inflammatory models possibly with slightly less gastrointestinal irritation than both phenylbutazone and tiaramide.

Structural modification and the coronary vasodilator activity of the calcium antagonist fostedil (KB-944) are described. Elimination of the bezothiazole ring or replacement of the benzothiazole ring of fostedil with other hetero rings leads to a decrease in vasodilator activity. Change of the distance from the aromatic ring to the phosphorus of fostedil causes a decrease in the activity. The present study indicates that the presence of an aromatic ring substituted thiazole ring and the presence of phosphonate at an appropriate distance from the thiazole ring are important for the coronary vasodilator action of fostedil.

A series of 4-(benzothiazol-2-yl)benzylphosphonic acid dialkyl ester derivatives were synthesized and evaluated for coronary vasodilatory activity by Langendorff's method in the isolated guinea pig heart. Many of the phosphonic acid dialkyl esters exhibited vasodilatory activity and calcium antagonism comparable with those of diltiazem hydrochloride, whereas phosphonic acid 1b and its nonphosphonated precursor 7a were inactive. These results indicate the necessity of the diethoxyphosphinyl moiety for vasodilatory activity. Substitution of the benzothiazole ring with a variety of substituents did not significantly enhance the activity of the unsubstituted compound. Compound 10b (KB-944) was chosen for detailed pharmacological evaluation.