Search

Several series of molecular dynamics (MD) runs are performed to simulate the melting transition of bimetallic cuboctahedral nanoparticles of gold-palladium at different relative concentrations to explore their structural properties before, in and after the transition. The melting transition temperature has a strong dependence on the relative concentrations of the atomic species and the melting of the surface below [T.sub.m] is consistent with studies of the interaction of a TEM electron beam with Au and Au-Pd nanoparticles.

Pt-Au bimetallic nanoparticles are synthesized by the polyol method and stabilized with poly(vinylpyrrolidone), modifying the temperature of synthesis. It was observed that at lower temperatures no bimetallic nanoparticles were detected but as the temperature increased bimetallic nanoparticles started to appear, commonly obtaining core-shell nanoparticles, always covered by the polymer.

An atomic force microscopy (AFM) can isolate individual peptide-wrapped single-walled carbon nanotubes (SWNTs) possibly connected end-to-end long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions was observed in the AFM and transmission electron microscopy images.

Electrochemical oxygen reduction reaction (ORR) catalysts that have both high activities and long-term stabilities are needed for proton-exchange membrane fuel cells (PEMFCs) and metal-air batteries. Two-dimensional (2D) materials based on graphene have shown high catalytic activities, however, carbon-based materials result in significant catalyst degradation due to carbon oxidation that occurs at high electrochemical potentials. Here, we introduce the synthesis and electrochemical performance of metallic 2D nanoframes which represent a new approach to translate 2D materials into unsupported (carbon-free) electrocatalysts that have both significantly higher ORR catalytic activities and stabilities compared with conventional Pt/carbon electrocatalysts. Metallic Ni-Pt 2D nanoframes were synthesized by controlled thermal treatments of Pt-decorated Ni(OH) 2 nanosheets. The nanoframes consist of a hierarchical 2D framework composed of a highly catalytically active Pt-Ni alloy phase with an interconnected solid and pore network that results in three-dimensional molecular accessibility. The inclusion of Ni within the Pt structure resulted in significantly smaller Pt lattice distances compared to those of Pt nanoparticles. On the basis of its unique local and extended structure, the ORR specific activity of Ni-Pt 2D nanoframes (5.8 mA cm Pt -2 ) was an order of magnitude higher than Pt/carbon. In addition, accelerated stability testing at elevated potentials up to 1.3 V RHE showed that the metallic Ni-Pt nanoframes exhibit significantly improved stability compared with Pt/carbon catalysts. The nanoarchitecture and local structure of metallic 2D nanoframes results in high combined specific activity and elevated potential stability. Analysis of the ORR electrochemical reaction kinetics on the Ni-Pt nanoframes supports that at low overpotentials the first electron transfer is the rate-determining step, and the reaction proceeds via a four electron reduction process. The ability to create metallic 2D structures with 3D molecular accessibility opens up new opportunities for the design of high activity and stability carbon-free catalyst nanoarchitectures for numerous electrocatalytic and catalytic applications.

Ultrathin transition metal dichalcogenides (TMDCs) of Mo and W show great potential for digital electronics and optoelectronic applications. Whereas early studies were limited to mechanically exfoliated flakes, the large-area synthesis of 2D TMDCs has now been realized by chemical vapor deposition (CVD) based on a sulfurization reaction. The optoelectronic properties of CVD grown monolayer MoS2 have been intensively investigated, but the influence of stoichiometry on the electrical and optical properties has been largely overlooked. Here we systematically vary the stoichiometry of monolayer MoS2 during CVD via controlled sulfurization and investigate the associated changes in photoluminescence and electrical properties. X-ray photoelectron spectroscopy is employed to measure relative variations in stoichiometry and the persistence of MoOx species. As MoS2-δ is reduced (increasing δ), the field-effect mobility of monolayer transistors increases while the photoluminescence yield becomes nonuniform. Devices fabricated from monolayers with the lowest sulfur content have negligible hysteresis and a threshold voltage of ∼ 0 V. We conclude that the electrical and optical properties of monolayer MoS2 crystals can be tuned via stoichiometry engineering to meet the requirements of various applications.

Determination of the total structure of molecular nanocrystals is an outstanding experimental challenge that has been met, in only a few cases, by single-crystal X-ray diffraction. Described here is an alternative approach that is of most general applicability and does not require the fabrication of a single crystal. The method is based on rapid, time-resolved nanobeam electron diffraction (NBD) combined with high-angle annular dark field scanning/transmission electron microscopy (HAADF-STEM) images in a probe corrected STEM microscope, operated at reduced voltages. The results are compared with theoretical simulations of images and diffraction patterns obtained from atomistic structural models derived through first-principles density functional theory (DFT) calculations. The method is demonstrated by application to determination of the structure of the Au 144 (SCH 2 CH 2 Ph) 60 cluster.

Bimetallic nanoparticles present different properties than their monometallic counterparts, opening a wide range of possibilities for different applications. PtPd nanoparticles have raised interest for their many applications in fuel cells, ethanol and methanol oxidation reactions, hydrogen storage, etc. However, the cost of Pt makes it unpractical to use in big quantities; therefore, one of the big challenges is to synthesize very small catalysts in order to maximize the efficiency in their use. In this work, we synthesized polyhedral PtPd core-shell nanoparticles under 20 nm and characterized them by Cs-corrected scanning transmission electron microscopy. This technique allowed us to probe the structure at the atomic level of these nanoparticles revealing new structural information. We determined the structure of the three main polyhedral morphologies obtained in the synthesis: octahedral, decahedral and triangular plates. Decahedral PtPd core-shell nanoparticles are novel morphologies for this system. Morphology and defects present in the nanoparticles are shown and discussed.

Graphene oxide nanoribbons (GONRs) are wide bandgap semiconductors that can be reduced to metallic graphene nanoribbons. The transformation of GONRs from their semiconductive to the metallic state by annealing has attracted significant interest due to its simplicity. However, the detailed process by which GONRs transform from wide-bandgap semiconductors to semimetals with a near zero bandgap is unclear. As a result, precise control of the bandgap between these two states is not currently achievable. Here, we quantitatively examine the removal of oxygen-containing groups and changes in the bandgap during thermal annealing of GONRs. X-ray photoelectron spectroscopy measurements show the progressive removal of oxygen-containing functional groups. Aberration-corrected scanning transmission electron microscopy reveals that initially small graphene regions in GONRs become large stacked graphitic layers during thermal annealing. These structural and chemical changes are correlated with progressive changes in the electrochemical bandgap, monitored by cyclic voltammetry. These results show that small changes in the thermal annealing temperature result in significant changes to the bandgap and chemical composition of GONRs and provide a straightforward method for tuning the bandgap in oxidized graphene structures.

The stability of decahedral shaped nanoparticles depends upon size. Ino and Marks introduced new mechanisms for the stabilization of decahedra nanoparticles which involves the faceting and the formation of surfaces different of {111}. These mechanisms have relevance for small size nanoparticles; however, they do not explain, thoroughly, how decahedral particles can grow up to 300 nm or more. Here, we report new mechanisms that help stabilize very large decahedral. With the use of aberration corrected scanning transmission electron microscopy, we observed the formation of high index facets, determined to be of the {511} family, on all five sides of the particles. Surface dislocations strings are also observed. In addition, surface reconstruction of the {001} surfaces can also be observed in two different orientation: with hexagonal strings along the [110] and along the [410] directions.

Long multi-branched gold nanoparticles have been synthesized in a very high yield through a facile synthesis combining two different capping agents. The stability of these materials with the time has been tested and their characterization have been performed by diverse advanced electron microscopy techniques, paying special attention to aberration corrected transmission electron microscopy in order to unambiguously analyze the surface structure of the branches and provide insights for the formation of stellated gold nanoparticles.