27 results on '"Jing, Qingshen"'
Search Results
2. Fully Printed Organic–Inorganic Nanocomposites for Flexible Thermoelectric Applications
- Author
-
Ou, Canlin, Sangle, Abhijeet L., Datta, Anuja, Jing, Qingshen, Busolo, Tommaso, Chalklen, Thomas, Narayan, Vijay, and Kar-Narayan, Sohini
- Subjects
energy harvesting ,thermoelectric nanocomposite ,solvothermal synthesis ,poly(3,4-ethylenedioxythiophene) polystyrene sulfonate ,Research Article ,aerosol jet printing - Abstract
Thermoelectric materials, capable of interconverting heat and electricity, are attractive for applications in thermal energy harvesting as a means to power wireless sensors, wearable devices, and portable electronics. However, traditional inorganic thermoelectric materials pose significant challenges due to high cost, toxicity, scarcity, and brittleness, particularly when it comes to applications requiring flexibility. Here, we investigate organic–inorganic nanocomposites that have been developed from bespoke inks which are printed via an aerosol jet printing method onto flexible substrates. For this purpose, a novel in situ aerosol mixing method has been developed to ensure uniform distribution of Bi2Te3/Sb2Te3 nanocrystals, fabricated by a scalable solvothermal synthesis method, within a poly(3,4-ethylenedioxythiophene) polystyrene sulfonate matrix. The thermoelectric properties of the resulting printed nanocomposite structures have been evaluated as a function of composition, and the power factor was found to be maximum (∼30 μW/mK2) for a nominal loading fraction of 85 wt % Sb2Te3 nanoflakes. Importantly, the printed nanocomposites were found to be stable and robust upon repeated flexing to curvatures up to 300 m–1, making these hybrid materials particularly suitable for flexible thermoelectric applications.
- Published
- 2018
3. In Situ Quantitative Study of Nanoscale Triboelectrificationand Patterning.
- Author
-
Zhou, Yu Sheng, Liu, Ying, Zhu, Guang, Lin, Zong-Hong, Pan, Caofeng, Jing, Qingshen, and Wang, Zhong Lin
- Published
- 2013
- Full Text
- View/download PDF
4. Segmentally Structured Disk Triboelectric Nanogeneratorfor Harvesting Rotational Mechanical Energy.
- Author
-
Lin, Long, Wang, Sihong, Xie, Yannan, Jing, Qingshen, Niu, Simiao, Hu, Youfan, and Wang, Zhong Lin
- Published
- 2013
- Full Text
- View/download PDF
5. Sliding-Triboelectric Nanogenerators Based on In-PlaneCharge-Separation Mechanism.
- Author
-
Wang, Sihong, Lin, Long, Xie, Yannan, Jing, Qingshen, Niu, Simiao, and Wang, Zhong Lin
- Published
- 2013
- Full Text
- View/download PDF
6. Linear-Grating Triboelectric Generator Based on SlidingElectrification.
- Author
-
Zhu, Guang, Chen, Jun, Liu, Ying, Bai, Peng, Zhou, Yu Sheng, Jing, Qingshen, Pan, Caofeng, and Wang, Zhong Lin
- Published
- 2013
- Full Text
- View/download PDF
7. Toward Large-Scale EnergyHarvesting by a Nanoparticle-EnhancedTriboelectric Nanogenerator.
- Author
-
Zhu, Guang, Lin, Zong-Hong, Jing, Qingshen, Bai, Peng, Pan, Caofeng, Yang, Ya, Zhou, Yusheng, and Wang, Zhong Lin
- Published
- 2013
- Full Text
- View/download PDF
8. Networks of triboelectric nanogenerators for harvesting water wave energy: a potential approach toward blue energy.
- Author
-
Chen J, Yang J, Li Z, Fan X, Zi Y, Jing Q, Guo H, Wen Z, Pradel KC, Niu S, and Wang ZL
- Abstract
With 70% of the earth's surface covered with water, wave energy is abundant and has the potential to be one of the most environmentally benign forms of electric energy. However, owing to lack of effective technology, water wave energy harvesting is almost unexplored as an energy source. Here, we report a network design made of triboelectric nanogenerators (TENGs) for large-scale harvesting of kinetic water energy. Relying on surface charging effect between the conventional polymers and very thin layer of metal as electrodes for each TENG, the TENG networks (TENG-NW) that naturally float on the water surface convert the slow, random, and high-force oscillatory wave energy into electricity. On the basis of the measured output of a single TENG, the TENG-NW is expected to give an average power output of 1.15 MW from 1 km(2) surface area. Given the compelling features, such as being lightweight, extremely cost-effective, environmentally friendly, easily implemented, and capable of floating on the water surface, the TENG-NW renders an innovative and effective approach toward large-scale blue energy harvesting from the ocean.
- Published
- 2015
- Full Text
- View/download PDF
9. Personalized keystroke dynamics for self-powered human--machine interfacing.
- Author
-
Chen J, Zhu G, Yang J, Jing Q, Bai P, Yang W, Qi X, Su Y, and Wang ZL
- Subjects
- Biometry, Equipment Design, Fingers, Humans, Movement, Artificial Intelligence, Computers, Electrical Equipment and Supplies, Mechanical Phenomena
- Abstract
The computer keyboard is one of the most common, reliable, accessible, and effective tools used for human--machine interfacing and information exchange. Although keyboards have been used for hundreds of years for advancing human civilization, studying human behavior by keystroke dynamics using smart keyboards remains a great challenge. Here we report a self-powered, non-mechanical-punching keyboard enabled by contact electrification between human fingers and keys, which converts mechanical stimuli applied to the keyboard into local electronic signals without applying an external power. The intelligent keyboard (IKB) can not only sensitively trigger a wireless alarm system once gentle finger tapping occurs but also trace and record typed content by detecting both the dynamic time intervals between and during the inputting of letters and the force used for each typing action. Such features hold promise for its use as a smart security system that can realize detection, alert, recording, and identification. Moreover, the IKB is able to identify personal characteristics from different individuals, assisted by the behavioral biometric of keystroke dynamics. Furthermore, the IKB can effectively harness typing motions for electricity to charge commercial electronics at arbitrary typing speeds greater than 100 characters per min. Given the above features, the IKB can be potentially applied not only to self-powered electronics but also to artificial intelligence, cyber security, and computer or network access control.
- Published
- 2015
- Full Text
- View/download PDF
10. Harvesting broadband kinetic impact energy from mechanical triggering/vibration and water waves.
- Author
-
Wen X, Yang W, Jing Q, and Wang ZL
- Abstract
We invented a triboelectric nanogenerator (TENG) that is based on a wavy-structured Cu-Kapton-Cu film sandwiched between two flat nanostructured PTFE films for harvesting energy due to mechanical vibration/impacting/compressing using the triboelectrification effect. This structure design allows the TENG to be self-restorable after impact without the use of extra springs and converts direct impact into lateral sliding, which is proved to be a much more efficient friction mode for energy harvesting. The working mechanism has been elaborated using the capacitor model and finite-element simulation. Vibrational energy from 5 to 500 Hz has been harvested, and the generator's resonance frequency was determined to be ∼100 Hz at a broad full width at half-maximum of over 100 Hz, producing an open-circuit voltage of up to 72 V, a short-circuit current of up to 32 μA, and a peak power density of 0.4 W/m(2). Most importantly, the wavy structure of the TENG can be easily packaged for harvesting the impact energy from water waves, clearly establishing the principle for ocean wave energy harvesting. Considering the advantages of TENGs, such as cost-effectiveness, light weight, and easy scalability, this approach might open the possibility for obtaining green and sustainable energy from the ocean using nanostructured materials. Lastly, different ways of agitating water were studied to trigger the packaged TENG. By analyzing the output signals and their corresponding fast Fourier transform spectra, three ways of agitation were evidently distinguished from each other, demonstrating the potential of the TENG for hydrological analysis.
- Published
- 2014
- Full Text
- View/download PDF
11. Harvesting water wave energy by asymmetric screening of electrostatic charges on a nanostructured hydrophobic thin-film surface.
- Author
-
Zhu G, Su Y, Bai P, Chen J, Jing Q, Yang W, and Wang ZL
- Abstract
Energy harvesting from ambient water motions is a desirable but underexplored solution to on-site energy demand for self-powered electronics. Here we report a liquid-solid electrification-enabled generator based on a fluorinated ethylene propylene thin film, below which an array of electrodes are fabricated. The surface of the thin film is charged first due to the water-solid contact electrification. Aligned nanowires created on the thin film make it hydrophobic and also increase the surface area. Then the asymmetric screening to the surface charges by the waving water during emerging and submerging processes causes the free electrons on the electrodes to flow through an external load, resulting in power generation. The generator produces sufficient output power for driving an array of small electronics during direct interaction with water bodies, including surface waves and falling drops. Polymer-nanowire-based surface modification increases the contact area at the liquid-solid interface, leading to enhanced surface charging density and thus electric output at an efficiency of 7.7%. Our planar-structured generator features an all-in-one design without separate and movable components for capturing and transmitting mechanical energy. It has extremely lightweight and small volume, making it a portable, flexible, and convenient power solution that can be applied on the ocean/river surface, at coastal/offshore areas, and even in rainy places. Considering the demonstrated scalability, it can also be possibly used in large-scale energy generation if layers of planar sheets are connected into a network.
- Published
- 2014
- Full Text
- View/download PDF
12. Self-powered, ultrasensitive, flexible tactile sensors based on contact electrification.
- Author
-
Zhu G, Yang WQ, Zhang T, Jing Q, Chen J, Zhou YS, Bai P, and Wang ZL
- Subjects
- Humans, Nanowires, Pressure, User-Computer Interface
- Abstract
Tactile/touch sensing is essential in developing human-machine interfacing and electronic skins for areas such as automation, security, and medical care. Here, we report a self-powered triboelectric sensor based on flexible thin-film materials. It relies on contact electrification to generate a voltage signal in response to a physical contact without using an external power supply. Enabled by the unique sensing mechanism and surface modification by polymer-nanowires, the triboelectric sensor shows an exceptional pressure sensitivity of 44 mV/Pa (0.09% Pa(-1)) and a maximum touch sensitivity of 1.1 V/Pa (2.3% Pa(-1)) in the extremely low-pressure region (<0.15 KPa). Through integration of the sensor with a signal-processing circuit, a complete tactile sensing system is further developed. Diverse applications of the system are demonstrated, explicitly indicating a variety of immediate uses in human-electronics interface, automatic control, surveillance, remote operation, and security systems.
- Published
- 2014
- Full Text
- View/download PDF
13. Triboelectrification based motion sensor for human-machine interfacing.
- Author
-
Yang W, Chen J, Wen X, Jing Q, Yang J, Su Y, Zhu G, Wu W, and Wang ZL
- Subjects
- Electricity, Electrodes, Humans, Joints physiology, Signal-To-Noise Ratio, Motion, Nanotechnology instrumentation
- Abstract
We present triboelectrification based, flexible, reusable, and skin-friendly dry biopotential electrode arrays as motion sensors for tracking muscle motion and human-machine interfacing (HMI). The independently addressable, self-powered sensor arrays have been utilized to record the electric output signals as a mapping figure to accurately identify the degrees of freedom as well as directions and magnitude of muscle motions. A fast Fourier transform (FFT) technique was employed to analyse the frequency spectra of the obtained electric signals and thus to determine the motion angular velocities. Moreover, the motion sensor arrays produced a short-circuit current density up to 10.71 mA/m(2), and an open-circuit voltage as high as 42.6 V with a remarkable signal-to-noise ratio up to 1000, which enables the devices as sensors to accurately record and transform the motions of the human joints, such as elbow, knee, heel, and even fingers, and thus renders it a superior and unique invention in the field of HMI.
- Published
- 2014
- Full Text
- View/download PDF
14. Triboelectric sensor for self-powered tracking of object motion inside tubing.
- Author
-
Su Y, Zhu G, Yang W, Yang J, Chen J, Jing Q, Wu Z, Jiang Y, and Wang ZL
- Abstract
We report a self-powered, single-electrode-based triboelectric sensor (SE-TES) array for detecting object motion inside of a plastic tube. This innovative, cost-effective, simple-designed SE-TES consists of thin-film-based ring-shaped Cu electrodes and a polytetrafluoroethylene (PTFE) tube. On the basis of the coupling effect between triboelectrification and electrostatic induction, the sensor generates electric output signals in response to mechanical motion of an object (such as a ball) passing through the electrodes. An array of Cu electrodes linearly aligned along the tube enables the detection of location and speed of the moving steel ball inside. The signal-to-noise ratio of this fabricated device reached 5.3 × 10(3). Furthermore, we demonstrated real-time monitoring and mapping of the motion characteristics of the steel ball inside the tube by using a seven-unit array of electrode channels arranged along the tube. Triggered by the output current signal, LED bulbs were utilized as real-time indicators of the position of a rolling ball. In addition, the SE-TES also shows the capability of detecting blockage in a water pipe. This work demonstrates potentially widespread applications of the triboelectric sensor in a self-powered tracking system, blockage detection, flow control, and logistics monitoring.
- Published
- 2014
- Full Text
- View/download PDF
15. Case-encapsulated triboelectric nanogenerator for harvesting energy from reciprocating sliding motion.
- Author
-
Jing Q, Zhu G, Bai P, Xie Y, Chen J, Han RP, and Wang ZL
- Subjects
- Capsules, Electric Conductivity, Finite Element Analysis, Humans, Movement, Nanoparticles, Polytetrafluoroethylene chemistry, Electric Power Supplies, Motion, Nanotechnology instrumentation
- Abstract
Reciprocating motion is a widely existing form of mechanical motion in natural environment. In this work we reported a case-encapsulated triboelectric nanogenerator (cTENG) based on sliding electrification to convert reciprocating motion into electric energy. Patterned with multiple sets of grating electrodes and lubricated with polytetrafluoroethylene (PTFE) nanoparticles, the cTENG exported an average effective output power of 12.2 mW over 140 kΩ external load at a sliding velocity of 1 m/s, in corresponding to a power density of 1.36 W/m(2). The sliding motion can be induced by direct-applied forces as well as inertia forces, enabling the applicability of the cTENG in addressing ambient vibration motions that feature large amplitude and low frequency. The cTENG was demonstrated to effectively harvest energy from human body motions and wavy water surface, indicating promising prospects of the cTENG in applications such as portable and stand-alone self-powered electronics.
- Published
- 2014
- Full Text
- View/download PDF
16. Triboelectric nanogenerator built on suspended 3D spiral structure as vibration and positioning sensor and wave energy harvester.
- Author
-
Hu Y, Yang J, Jing Q, Niu S, Wu W, and Wang ZL
- Abstract
An unstable mechanical structure that can self-balance when perturbed is a superior choice for vibration energy harvesting and vibration detection. In this work, a suspended 3D spiral structure is integrated with a triboelectric nanogenerator (TENG) for energy harvesting and sensor applications. The newly designed vertical contact-separation mode TENG has a wide working bandwidth of 30 Hz in low-frequency range with a maximum output power density of 2.76 W/m(2) on a load of 6 MΩ. The position of an in-plane vibration source was identified by placing TENGs at multiple positions as multichannel, self-powered active sensors, and the location of the vibration source was determined with an error less than 6%. The magnitude of the vibration is also measured by the output voltage and current signal of the TENG. By integrating the TENG inside a buoy ball, wave energy harvesting at water surface has been demonstrated and used for lighting illumination light, which shows great potential applications in marine science and environmental/infrastructure monitoring.
- Published
- 2013
- Full Text
- View/download PDF
17. Human skin based triboelectric nanogenerators for harvesting biomechanical energy and as self-powered active tactile sensor system.
- Author
-
Yang Y, Zhang H, Lin ZH, Zhou YS, Jing Q, Su Y, Yang J, Chen J, Hu C, and Wang ZL
- Subjects
- Humans, Bioelectric Energy Sources, Biosensing Techniques, Nanotechnology, Skin, Touch
- Abstract
We report human skin based triboelectric nanogenerators (TENG) that can either harvest biomechanical energy or be utilized as a self-powered tactile sensor system for touch pad technology. We constructed a TENG utilizing the contact/separation between an area of human skin and a polydimethylsiloxane (PDMS) film with a surface of micropyramid structures, which was attached to an ITO electrode that was grounded across a loading resistor. The fabricated TENG delivers an open-circuit voltage up to -1000 V, a short-circuit current density of 8 mA/m(2), and a power density of 500 mW/m(2) on a load of 100 MΩ, which can be used to directly drive tens of green light-emitting diodes. The working mechanism of the TENG is based on the charge transfer between the ITO electrode and ground via modulating the separation distance between the tribo-charged skin patch and PDMS film. Furthermore, the TENG has been used in designing an independently addressed matrix for tracking the location and pressure of human touch. The fabricated matrix has demonstrated its self-powered and high-resolution tactile sensing capabilities by recording the output voltage signals as a mapping figure, where the detection sensitivity of the pressure is about 0.29 ± 0.02 V/kPa and each pixel can have a size of 3 mm × 3 mm. The TENGs may have potential applications in human-machine interfacing, micro/nano-electromechanical systems, and touch pad technology.
- Published
- 2013
- Full Text
- View/download PDF
18. Rotary triboelectric nanogenerator based on a hybridized mechanism for harvesting wind energy.
- Author
-
Xie Y, Wang S, Lin L, Jing Q, Lin ZH, Niu S, Wu Z, and Wang ZL
- Abstract
Harvesting mechanical energy is becoming increasingly important for its availability and abundance in our living environment. Triboelectric nanogenerator (TENG) is a simple, cost-effective, and highly efficient approach for generating electricity from mechanical energies in a wide range of forms. Here, we developed a TENG designed for harvesting tiny-scale wind energy available in our normal living environment using conventional materials. The energy harvester is based on a rotary driven mechanical deformation of multiple plate-based TENGs. The operation mechanism is a hybridization of the contact-sliding-separation-contact processes by using the triboelectrification and electrostatic induction effects. With the introduction of polymer nanowires on surfaces, the rotary TENG delivers an open-circuit voltage of 250 V and a short-circuit current of 0.25 mA, corresponding to a maximum power density of ~39 W/m(2) at a wind speed of ~15 m/s, which is capable of directly driving hundreds of electronic devices such as commercial light-emitting diodes (LEDs), or rapidly charging capacitors. The rotary TENG was also applied as a self-powered sensor for measuring wind speed. This work represents a significant progress in the practical application of the TENG and its great potential in the future wind power technology. This technology can also be extended for harvesting energy from ocean current, making nanotechnology reaching our daily life a possibility in the near future.
- Published
- 2013
- Full Text
- View/download PDF
19. Single-electrode-based sliding triboelectric nanogenerator for self-powered displacement vector sensor system.
- Author
-
Yang Y, Zhang H, Chen J, Jing Q, Zhou YS, Wen X, and Wang ZL
- Abstract
We report a single-electrode-based sliding-mode triboelectric nanogenerator (TENG) that not only can harvest mechanical energy but also is a self-powered displacement vector sensor system for touching pad technology. By utilizing the relative sliding between an electrodeless polytetrafluoroethylene (PTFE) patch with surface-etched nanoparticles and an Al electrode that is grounded, the fabricated TENG can produce an open-circuit voltage up to 1100 V, a short-circuit current density of 6 mA/m(2), and a maximum power density of 350 mW/m(2) on a load of 100 MΩ, which can be used to instantaneously drive 100 green-light-emitting diodes (LEDs). The working mechanism of the TENG is based on the charge transfer between the Al electrode and the ground by modulating the relative sliding distance between the tribo-charged PTFE patch and the Al plate. Grating of linear rows on the Al electrode enables the detection of the sliding speed of the PTFE patch along one direction. Moreover, we demonstrated that 16 Al electrode channels arranged along four directions were used to monitor the displacement (the direction and the location) of the PTFE patch at the center, where the output voltage signals in the 16 channels were recorded in real-time to form a mapping figure. The advantage of this design is that it only requires the bottom Al electrode to be grounded and the top PTFE patch needs no electrical contact, which is beneficial for energy harvesting in automobile rotation mode and touch pad applications.
- Published
- 2013
- Full Text
- View/download PDF
20. Cylindrical rotating triboelectric nanogenerator.
- Author
-
Bai P, Zhu G, Liu Y, Chen J, Jing Q, Yang W, Ma J, Zhang G, and Wang ZL
- Subjects
- Equipment Design, Equipment Failure Analysis, Motion, Particle Size, Rotation, Electric Power Supplies, Micro-Electrical-Mechanical Systems instrumentation, Nanostructures chemistry, Nanostructures ultrastructure, Nanotechnology instrumentation, Transducers
- Abstract
We demonstrate a cylindrical rotating triboelectric nanogenerator (TENG) based on sliding electrification for harvesting mechanical energy from rotational motion. The rotating TENG is based on a core-shell structure that is made of distinctly different triboelectric materials with alternative strip structures on the surface. The charge transfer is strengthened with the formation of polymer nanoparticles on surfaces. During coaxial rotation, a contact-induced electrification and the relative sliding between the contact surfaces of the core and the shell result in an "in-plane" lateral polarization, which drives the flow of electrons in the external load. A power density of 36.9 W/m(2) (short-circuit current of 90 μA and open-circuit voltage of 410 V) has been achieved by a rotating TENG with 8 strip units at a linear rotational velocity of 1.33 m/s (a rotation rate of 1000 r/min). The output can be further enhanced by integrating more strip units and/or applying larger linear rotational velocity. This rotating TENG can be used as a direct power source to drive small electronics, such as LED bulbs. This study proves the possibility to harvest mechanical energy by TENGs from rotational motion, demonstrating its potential for harvesting the flow energy of air or water for applications such as self-powered environmental sensors and wildlife tracking devices.
- Published
- 2013
- Full Text
- View/download PDF
21. Segmentally structured disk triboelectric nanogenerator for harvesting rotational mechanical energy.
- Author
-
Lin L, Wang S, Xie Y, Jing Q, Niu S, Hu Y, and Wang ZL
- Abstract
We introduce an innovative design of a disk triboelectric nanogenerator (TENG) with segmental structures for harvesting rotational mechanical energy. Based on a cyclic in-plane charge separation between the segments that have distinct triboelectric polarities, the disk TENG generates electricity with unique characteristics, which have been studied by conjunction of experimental results with finite element calculations. The role played by the segmentation number is studied for maximizing output. A distinct relationship between the rotation speed and the electrical output has been thoroughly investigated, which not only shows power enhancement at high speed but also illuminates its potential application as a self-powered angular speed sensor. Owing to the nonintermittent and ultrafast rotation-induced charge transfer, the disk TENG has been demonstrated as an efficient power source for instantaneously or even continuously driving electronic devices and/or charging an energy storage unit. This work presents a novel working mode of TENGs and opens up many potential applications of nanogenerators for harvesting even large-scale energy.
- Published
- 2013
- Full Text
- View/download PDF
22. In situ quantitative study of nanoscale triboelectrification and patterning.
- Author
-
Zhou YS, Liu Y, Zhu G, Lin ZH, Pan C, Jing Q, and Wang ZL
- Abstract
By combining contact-mode atomic force microscopy (AFM) and scanning Kevin probe microscopy (SKPM), we demonstrated an in situ method for quantitative characterization of the triboelectrification process at the nanoscale. We systematically characterized the triboelectric charge distribution, multifriction effect on charge transfer, as well as subsequent charge diffusion on the dielectric surface: (i) the SiO2 surface can be either positively or negatively charged through triboelectric process using Si-based AFM probes with and without Pt coating, respectively; (ii) the triboelectric charges accumulated from multifriction and eventually reached to saturated concentrations of (-150 ± 8) μC/m(2) and (105 ± 6) μC/m(2), respectively; (iii) the charge diffusion coefficients on SiO2 surface were measured to be (1.10 ± 0.03) × 10(-15) m(2)/s for the positive charge and (0.19 ± 0.01) × 10(-15) m(2)/s for the negative charges. These quantifications will facilitate a fundamental understanding about the triboelectric and de-electrification process, which is important for designing high performance triboelectric nanogenerators. In addition, we demonstrated a technique for nanopatterning of surface charges without assistance of external electric field, which has a promising potential application for directed self-assembly of charged nanostructures for nanoelectronic devices.
- Published
- 2013
- Full Text
- View/download PDF
23. Sliding-triboelectric nanogenerators based on in-plane charge-separation mechanism.
- Author
-
Wang S, Lin L, Xie Y, Jing Q, Niu S, and Wang ZL
- Subjects
- Electrons, Nanowires chemistry, Nylons chemistry, Polytetrafluoroethylene chemistry, Nanotechnology instrumentation
- Abstract
Aiming at harvesting ambient mechanical energy for self-powered systems, triboelectric nanogenerators (TENGs) have been recently developed as a highly efficient, cost-effective and robust approach to generate electricity from mechanical movements and vibrations on the basis of the coupling between triboelectrification and electrostatic induction. However, all of the previously demonstrated TENGs are based on vertical separation of triboelectric-charged planes, which requires sophisticated device structures to ensure enough resilience for the charge separation, otherwise there is no output current. In this paper, we demonstrated a newly designed TENG based on an in-plane charge separation process using the relative sliding between two contacting surfaces. Using Polyamide 6,6 (Nylon) and polytetrafluoroethylene (PTFE) films with surface etched nanowires, the two polymers at the opposite ends of the triboelectric series, the newly invented TENG produces an open-circuit voltage up to ~1300 V and a short-circuit current density of 4.1 mA/m(2) with a peak power density of 5.3 W/m(2), which can be used as a direct power source for instantaneously driving hundreds of serially connected light-emitting diodes (LEDs). The working principle and the relationships between electrical outputs and the sliding motion are fully elaborated and systematically studied, providing a new mode of TENGs with diverse applications. Compared to the existing vertical-touching based TENGs, this planar-sliding TENG has a high efficiency, easy fabrication, and suitability for many types of mechanical triggering. Furthermore, with the relationship between the electrical output and the sliding motion being calibrated, the sliding-based TENG could potentially be used as a self-powered displacement/speed/acceleration sensor.
- Published
- 2013
- Full Text
- View/download PDF
24. Integrated multilayered triboelectric nanogenerator for harvesting biomechanical energy from human motions.
- Author
-
Bai P, Zhu G, Lin ZH, Jing Q, Chen J, Zhang G, Ma J, and Wang ZL
- Subjects
- Energy Transfer physiology, Equipment Design, Equipment Failure Analysis, Humans, Bioelectric Energy Sources, Micro-Electrical-Mechanical Systems instrumentation, Movement physiology, Nanotechnology instrumentation, Transducers
- Abstract
We demonstrate a new flexible multilayered triboelectric nanogenerator (TENG) with extremely low cost, simple structure, small size (3.8 cm×3.8 cm×0.95 cm) and lightweight (7 g) by innovatively integrating five layers of units on a single flexible substrate. Owing to the unique structure and nanopore-based surface modification on the metal surface, the instantaneous short-circuit current (Isc) and the open-circuit voltage (Voc) could reach 0.66 mA and 215 V with an instantaneous maximum power density of 9.8 mW/cm2 and 10.24 mW/cm3. This is the first 3D integrated TENG for enhancing the output power. Triggered by press from normal walking, the TENG attached onto a shoe pad was able to instantaneously drive multiple commercial LED bulbs. With the flexible structure, the TENG can be further integrated into clothes or even attached onto human body without introducing sensible obstruction and discomfort to human motions. The novel design of TENG demonstrated here can be applied to potentially achieve self-powered portable electronics.
- Published
- 2013
- Full Text
- View/download PDF
25. Toward large-scale energy harvesting by a nanoparticle-enhanced triboelectric nanogenerator.
- Author
-
Zhu G, Lin ZH, Jing Q, Bai P, Pan C, Yang Y, Zhou Y, and Wang ZL
- Abstract
This article describes a simple, cost-effective, and scalable approach to fabricate a triboelectric nanogenerator (NG) with ultrahigh electric output. Triggered by commonly available ambient mechanical energy such as human footfalls, a NG with size smaller than a human palm can generate maximum short-circuit current of 2 mA, delivering instantaneous power output of 1.2 W to external load. The power output corresponds to an area power density of 313 W/m(2) and a volume power density of 54,268 W/m(3) at an open-circuit voltage of ~1200 V. An energy conversion efficiency of 14.9% has been achieved. The power was capable of instantaneously lighting up as many as 600 multicolor commercial LED bulbs. The record high power output for the NG is attributed to optimized structure, proper materials selection and nanoscale surface modification. This work demonstrated the practicability of using NG to harvest large-scale mechanical energy, such as footsteps, rolling wheels, wind power, and ocean waves.
- Published
- 2013
- Full Text
- View/download PDF
26. Self-powered magnetic sensor based on a triboelectric nanogenerator.
- Author
-
Yang Y, Lin L, Zhang Y, Jing Q, Hou TC, and Wang ZL
- Subjects
- Equipment Design, Equipment Failure Analysis, Magnetic Fields, Radiation Dosage, Electric Power Supplies, Magnets, Nanotechnology instrumentation, Radiometry instrumentation, Transducers
- Abstract
Magnetic sensors are usually based on the Hall effect or a magnetoresistive sensing mechanism. Here we demonstrate that a nanogenerator can serve as a sensor for detecting the variation of the time-dependent magnetic field. The output voltage of the sensor was found to exponentially increase with increasing magnetic field. The detection sensitivities for the change and the changing rate of magnetic field are about 0.0363 ± 0.0004 ln(mV)/G and 0.0497 ± 0.0006 ln(mV)/(G/s), respectively. The response time and reset time of the sensor are about 0.13 and 0.34 s, respectively. The fabricated sensor has a detection resolution of about 3 G and can work under low frequencies (<0.4 Hz).
- Published
- 2012
- Full Text
- View/download PDF
27. Thermoelectric nanogenerators based on single Sb-doped ZnO micro/nanobelts.
- Author
-
Yang Y, Pradel KC, Jing Q, Wu JM, Zhang F, Zhou Y, Zhang Y, and Wang ZL
- Subjects
- Equipment Design, Equipment Failure Analysis, Hot Temperature, Materials Testing, Nanostructures ultrastructure, Particle Size, Antimony chemistry, Electric Power Supplies, Nanostructures chemistry, Nanotechnology instrumentation, Thermography instrumentation, Transducers, Zinc Oxide chemistry
- Abstract
We demonstrate a thermoelectric nanogenerator (NG) made from a single Sb-doped ZnO micro/nanobelt that generates an output power of about 1.94 nW under a temperature difference of 30 K between the two electrodes. A single Sb-doped ZnO microbelt was bonded at its ends on a glass substrate as a NG, which can give an output voltage of 10 mV and an output current of 194 nA. The single Sb-doped ZnO microbelt shows a Seebeck coefficient of about -350 μV/K and a high power factor of about 3.2 × 10(-4) W/mK(2). The fabricated NG demonstrated its potential to work as a self-powered temperature sensor with a reset time of about 9 s.
- Published
- 2012
- Full Text
- View/download PDF
Catalog
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.