Search

Oxidative bursts from plants play significant roles in plant disease defense and signal transduction; however, it has not hitherto been investigated on individual living plant cells. In this article, we fabricated a novel sensitive electrochemical sensor based on electrochemical deposition of Pt nanoparticles on the surface of carbon fiber microdisk electrodes via a nanopores containing polymer matrix, Nation. The numerous hydrophilic nanochannels in the Nation clusters coated on the electrode surface served as the molecular template for the deposition and dispersion of Pt, which resulted in the uniform construction of small Pt nanoparticles. The novel sensor displayed a high sensitivity for detection of [H.sub.2][O.sub.2] with a detection limit of 5.0 x [10.sup.-9] M. With the use of this microelectrochemical sensor, the oxidative burst from individual living plant protoplasts have been real-time monitored for the first time. The results showed that oxidative burst from single protoplasts triggered by a pathogen analogue were characterized by quanta release with a large nmnber of 'transient oxidative microburst' events, and protoplasts from the transgenic plants biologically displayed better disease-resistance and showed a distinguished elevation and longer-lasting oxidative burst. 10.1021/ac901300b

A novel microfluidic device has been developed for onchip transport, location, and quantal release monitoring of single cells. The microfluidic device consists of a plate of PDMS containing channels for introducing cells and stimulants and a glass substrate into which a cell microchamber was etched. The two tightly reversibly sealed plates can be separated for respective cleaning, which significantly extends the lifetime of the microchip that is frequently clogged in cell analysis experiments. Using hydraulic pressure, single cells were transported and located on the microfluidc chip. After location of a single PC12 cell on the microfluidic chip, the cell was stimulated by nicotine that was also introduced through the microchannels, and the quantum release of dopamine from the cell was amperometricly detected with our designed carbon fiber microelectrode. The results have demonstrated the convenience and efficiency of using the microfluidic chip for monitoring of quantal release from single cells and have offered a facile method for the analysis of single cells on microfluidic devices.

Microelectrode voltammetry has been considered to be a powerful technique for single biological cell analysis and brain research. In this paper, we have developed a simple method to get highly sensitive carbon fiber nanoelectrodes (CFNE) modified by single-walled carbon nanotubes (SWNTs) on the basis of our previous work. The electrochemical behavior of SWNTs/CFNE was characterized by potassium ferricyanide, dopamine (DA), epinephrine (E), and norepinephrine (NE) using cyclic voltammetry (CV). Compared with CFNE, SWNTs/CFNE has a much larger available internal surface area per external geometric area, which is supported by SEM images. The modified electrodes show very high sensitivity and favorable electrochemical behavior toward these neurotransmitters. The peak current increases lineary with the concentration of DA, E, and NE in the range of 1.0 x [10.sup.-7] -1.0 x [10.sup.-4], 3.0 x [10.sup.-7] -1.0 x [10.sup.-4], and 5.0 x [10.sup.-7] -1.0 x [10.sup.-4]M, respectively. The CV detection limits (S/N=3) of DA, E, and NE is 7.7 x [10.sup.-9], 3.8 x [10.sup-8] x 4.2 x [10.sup.-8]M, respectively. The modified electrode exhibited almost the same electrochemical behavior after 15 days, indicating that SWNTs/CFNE is pretty stable and has good reproducibility.

In electrophoresis, the migration velocity is used for sizing DNA and proteins or for distinguishing molecules based on charge and hydrodynamic radius. Many protein and DNA assays relevant to disease diagnosis are based on such separations. However, standard protocols are not only slow (minutes to hours) but also insensitive (many molecules in a detectable band). We successfully demonstrated a high-throughput imaging approach that allows determination of the individual electrophoretic mobilities of many molecules at a time. Each measurement only requires a few milliseconds to complete. This opens up the possibility of screening single copies of DNA or proteins within single biological cells for disease markers without performing polymerase chain reaction or other biological amplification. The purpose is not to separate the DNA molecules but to identify each one on the basis of the measured electrophoretic mobility. We developed three different procedures to measure the individual molecular mobilities. The results correlate well with capillary electrophoresis (CE) experiments for the same samples (2-49 kb dsDNA) under identical separation conditions. The implication is that any electrophoresis protocols from slab gels to CE should be adaptable to single-molecule screening for disease diagnosis.

A new and facile method has been developed for the fabrication of low-noise carbon fiber microelectrodes (CFMEs) and carbon fiber nanoelectrodes (CFNEs). The carbon fiber was flame-fuse sealed in the tip of the glass capillary. The CFMEs were made by cutting the protruding carbon fiber to the desired length, and the CFNEs were achieved by etching the protruding carbon on the flame to form a nanometer-scale tip. The tip of CFNEs can be controlled within the range from 100 to 300 nm. Thus, no epoxy wax was involved in the CFMEs and CFNEs. The experimental results of inspecting CFMEs and CFNEs by scanning electron microscopy demonstrated that the surface of the electrodes and the glass/fiber interface are very smooth. Therefore, the noise caused by the glass/ fiber of these electrodes is much lower than that of the electrodes fabricated conventionally. The electrodes were characterized by ferricyanide, catecholamine (dopamine,-DA), norepinephrine (NE), and epinephrine (E)) and 5-hydroxytryptamine (5-HT) neurotransmitters using CV, LSV, DPV, and FSCV. The results showed that the CFMEs and CFNEs have very excellent electrochemical behavior and high sensitivity. The CV and DPV detection limits of DA, NE, and E are 7.6 x [10.sup.-8], 7.0 x [10.sup.-8], and 5.0 x [10.sup.-8] mol/L, and the DPV detection limits of DA, NE, and E are 4.0 x [10.sup.-8], 1.0 x [10.sup.-7], and 2.2 x [10.sup.-7] mol/L, respectively. This experiment offers a new and facile method for the fabrication of CFMEs and CFNEs of very high sensitivity and low noise.

Traditional methods for the detection of pathogenic bacteria are time-consuming, less efficient, and sensitive, which affects infection control and bungles illness. Therefore, developing a method to remedy these problems is very important in the clinic to diagnose the pathogenic diseases and guide the rational use of antibiotics. Here, microfluidic electrochemical integrated sensor (MEIS) has been investigated, functionally for rapid, efficient separation and sensitive detection of pathogenic bacteria. Three-dimensional macroporous PDMS and Au nanotube-based electrode are successfully assembled into the modeling microchip, playing the functions of "3D chaotic flow separator" and "electrochemical detector," respectively. The 3D chaotic flow separator enhances the turbulence of the fluid, achieving an excellent bacteria capture efficiency. Meanwhile, the electrochemical detector provides a quantitative signal through enzyme-linked immunoelectrochemistry with improved sensitivity. The microfluidic electrochemical integrated sensor could successfully isolate Candida albicans ( C. albicans ) in the range of 30-3,000,000 CFU in the saliva matrix with over 95% capture efficiency and sensitively detect C. albicans in 1 h in oral saliva samples. The integrated device demonstrates great potential in the diagnosis of oral candidiasis and is also applicable in the detection of other pathogenic bacteria.

Effective acquirement of highly pure circulating tumor cells (CTCs) is very important for CTC-related research. However, it is a great challenge since abundant white blood cells (WBCs) are always co-collected with CTCs because of nonspecific bonding or low depletion rate of WBCs in various CTC isolation platforms. Herein, we designed a three-dimensional (3D) conductive scaffold microchip for highly effective capture and electrochemical release of CTCs with high purity. The conductive 3D scaffold was prepared by dense immobilization of gold nanotubes (Au NTs) on porous polydimethylsiloxane and was functionalized with a CTC-specific biomolecule facilitated by a Au-S bond before embedding into a microfluidic device. The spatially distributed 3D macroporous structure compelled cells to change migration from linear to chaotic and the densely covered Au NTs enhanced the topographic interaction between cells and the substrate, thus synergistically improving the CTC capture efficiency. The Au NT-coated 3D scaffold had good electrical conductivity and the Au-S bond was breakable by voltage exposure so that captured CTCs could be specifically released by electrochemical stimulation while nonspecifically bonded WBCs were not responsive to this process, facilitating recovery of CTCs with high purity. The 3D conductive scaffold microchip was successfully applied to obtain highly pure CTCs from cancer patients' blood, benefiting the downstream analysis of CTCs.

Polar phosphorylated metabolites are involved in a variety of biological processes and play vital roles in energetic metabolism, cofactor regeneration, and nucleic acid synthesis. However, it is often challenging to interrogate polar phosphorylated metabolites and compounds from biological samples. Liquid chromatography-mass spectrometry (LC/MS) now plays a central role in metabolomic studies. However, LC/MS-based approaches have been hampered by the issues of the low ionization efficiencies, low in vivo concentrations, and less chemical stability of polar phosphorylated metabolites. In this work, we synthesized paired reagents of light and heavy isotopomers, 2-(diazomethyl)phenyl)(9-methyl-1,3,4,9-tetrahydro-2H-pyrido[3,4-b]indol-2-yl)methanone (DMPI) and d 3 -(2-(diazomethyl)phenyl)(9-methyl-1,3,4,9-tetrahydro-2H-pyrido[3,4-b]indol-2-yl)methanone ( d 3 -DMPI). The paired reagents of DMPI and d 3 -DMPI carry diazo groups that can efficiently and selectively react with the phosphate group on polar phosphorylated metabolites under mild conditions. As a proof of concept, we found that the transfer of the indole heterocycle group from DMPI/ d 3 -DMPI to ribonucleotides led to the significant increase of ionization efficiencies of ribonucleotides during LC/MS analysis. The detection sensitivities of these ribonucleotides increased by 25-1137-fold upon DMPI tagging with the limits of detection (LODs) being between 7 and 150 amol. With the developed method, we achieved the determination of all the 12 ribonucleotides from a single mammalian cell and from a single stamen of Arabidopsis thaliana . The method provides a valuable tool to investigate the dynamic changes of polar phosphorylated metabolites in a single cell under particular conditions.

A catalytic asymmetric umpolung cross-Mannich reaction of cyclic ketimines is realized. This protocol provides an efficient methodology for the facile synthesis of chiral vicinal tetrasubstituted diamines in high yields with excellent chemo-, regio-, diastereo-, and enantioselectivities using cinchona-derived bifunctional organocatalysts (85-98% yield, up to >20:1 dr, and >99% ee).

Current strategies for in vitro isolation of circulating tumor cells (CTCs) fail to detect extremely rare CTCs heterogeneously distributed in blood. It is possible to devise methods for in vivo capture of CTCs based on processing almost all of the blood in the human body to improve detection sensitivity, but the complicated manipulation, biosafety concerns, and limited capture efficiency of conventional detection strategies prohibit their implementation in the clinic. Herein, we present a flexible three-dimensional (3-D) CTC-Net probe for intravascular collection of CTCs. The CTC-Net, consisting of a 3-D elastic scaffold with an interconnected, spatially distributed network accommodates a large quantity of immobilized antibodies and provides an enhanced substrate-cell contact frequency, which results in an enhanced capture efficiency and effective detection of heterogeneous CTCs. The as-prepared CTC-Net can be readily compressed and injected into blood vessels and fully unfolded to form a 3-D "fishing-net" structure for capture of the CTCs, and then retracted for imaging and downstream gene analysis of the captured CTCs. Significant advantages for the CTC-Net over currently available in vitro and in vivo procedures are demonstrated for detection of extremely rare CTCs from wild-type rats and successful capture of CTCs and CTC clusters before metastasis in the case of tumor-bearing rats. Our research demonstrates for the first time the use of a 3-D scaffold CTC-Net probe for in vivo capture of CTCs. The method shows exceptional performance for cell capture, which is readily implemented and holds great potential in the clinic for early diagnosis of cancer.

Glutamate (Glu) is a critical neurotransmitter for neuronal communication in the nervous system. In vivo studies have shown that the concentration of Glu is reduced within the brains of those afflicted with Alzheimer's disease (AD), which is also associated with the accumulation of pathogenic amyloid-beta (Aβ). However, the effects of Aβ peptides on the level of Glu release, as well as how Aβ-mediated Glu fluctuation is initiated, remain largely unknown. Here, we fabricated a Glu electrochemical biosensor and in situ quantitatively monitored the release of Glu from a single varicosity of Aβ 1-42 -insulted hippocampal neurons. We found that before the depletion of Glu after 300 min of treatment with Aβ 1-42 , a short-duration (30 min) incubation with Aβ 1-42 caused a dramatic increase in vesicular Glu release compared to that of a control. Further investigation demonstrated that the density of vesicular glutamate transporter 1 (VGLUT1), which is responsible for transport of Glu into synaptic vesicles, also displayed a significant elevation and then dramatic depletion with the extension of the time of treatment with Aβ 1-42 . These results indicate that at the early stage of AD, Aβ 1-42 induces excessive Glu release, which may overstimulate the N -methyl-d-aspartic acid (NMDA) receptor, resulting in excitotoxicity and damage to neurons. In this work, the amount of Glu released together with its fluctuations under Aβ 1-42 oligomers toxicity conditions was monitored for the first time, and such monitoring could provide direct and new insights for current research on Aβ 1-42 -induced abnormalities in neurotransmitter release and neuron functions.

Stretchable electrochemical (EC) sensors have broad prospects in real-time monitoring of living cells and tissues owing to their excellent elasticity and deformability. However, the redox reaction products and cell secretions are easily adsorbed on the electrode, resulting in sensor fouling and passivation. Herein, we developed a stretchable and photocatalytically renewable EC sensor based on Au nanotubes (NTs) and TiO 2 nanowires (NWs) sandwich nanonetworks. The external Au NTs are used for EC sensing, and internal TiO 2 NWs provide photocatalytic performance to degrade contaminants, which endows the sensor with excellent EC performance, high photocatalytic activity, and favorable mechanical tensile property. This allows highly sensitive recycling monitoring of NO released from endothelial cells and 5-HT released from mast cells under their stretching states in real time, therefore providing a promising tool to unravel elastic and mechanically sensitive cells, tissues, and organs.

Electrochemiluminescence (ECL) detection has attracted increasing attention as a promising analytical approach. A considerable number of studies showed that ECL intensity can be definitely improved by resonance energy transfer (RET), while the RET efficiency is strongly dependent on the distance between exited donors and acceptors. Herein we disclose for the first time a highly enhanced RET strategy to promote the energy transfer efficiency by coencapsulating the donor ([Ru(bpy) 3 ] 2+ )/acceptor (CdTe quantum dots, CdTe QDs) pairs into a silica nanosphere. Plenty of [Ru(bpy) 3 ] 2+ and CdTe QDs closely packed inside a single nanosphere greatly shortens the electron-transfer path and increases the RET probability, therefore significantly enhancing the luminous efficiency. Further combining with molecularly imprinting technique, we develop a novel ECL sensor for ultrasensitive and highly selective detection of target molecules. Proof of concept experiments showed that extremely low detection limits of subfg/mL (S/N = 3) with broad linear ranges (fg/mL to ng/mL) could be obtained for detection of two kinds of mycotoxins (α-ergocryptine and ochratoxin A) that are recognized as potential health hazards at very low concentrations. This strategy combining enhanced RET system and molecularly imprinting technique, represents a versatile ECL platform toward low-cost, rapid, ultrasensitive, and highly selective detection of target molecules in diverse applications.

Current achievements on electrochemical monitoring of cells are often gained on two-dimensional (2D) substrates, which fail in mimicking the cellular environments and accurately reproducing the cellular functions within a three-dimensional (3D) tissue. In this regard, 3D scaffold concurrently integrated with the function of cell culture and electrochemical sensing is conceivably a promising platform to monitor cells in real time under their in vivo-like 3D microenvironments. However, it is particularly challenging to construct such a multifunctional scaffold platform. Herein, we developed a 3-aminophenylboronic acid (APBA) functionalized graphene foam (GF) network, which combines the biomimetic property of APBA with the mechanical and electrochemical properties of GF. Hence, the GF network can serve as a 3D scaffold to culture cells for a long period with high viability and simultaneously as an electrode for highly sensitive electrochemical sensing. This allows monitoring of gaseous messengers H 2 S released from the cells cultured on the 3D scaffold in real time. This work represents considerable progress in fabricating 3D cell culture scaffold with electrochemical properties, thereby facilitating future studies of physiologically relevant processes.

Tumor metastasis is attributed to circulating tumor cells (CTC) or CTC clusters. Many strategies have hitherto been designed to isolate CTCs, but there are few methods that can capture and gently release CTC clusters as efficient as single CTCs. Herein, we developed a three-dimensional (3D) scaffold chip with thermosensitive coating for high-efficiency capture and release of individual and cluster CTCs. The 3D scaffold chip successfully combines the specific recognition and physically obstructed effect of 3D scaffold structure to significantly improve cell clusters capture efficiency. Thermosensitive gelatin hydrogel uniformly coated on the scaffold dissolves at 37 °C quickly, and the captured cells are gently released from chip with high viability. Notably, this platform was applied to isolate CTCs from cancer patients' blood samples. This allows global DNA and RNA methylation analysis of collected single CTC and CTC clusters, indicating the great potential of this platform in cancer diagnosis and downstream analysis at the molecular level.

The pyrolysis of a block copolymer thin film, the free surface of which was in contact with air or a capping layer of SiO 2 , produced four carbon nanostructures. Thin films of a diblock copolymer having perpendicularly oriented lamellar nanodomains served as carbon and nitrogen precursors. Before pyrolysis, the lamellar nanodomains were cross-linked with UV irradiation under nitrogen gas (UVIN). Without a capping layer, pyrolysis caused a structural transformation from lamellar nanodomains to short carbon nanowires or to dropletlike nanocarbons in a row via Rayleigh instability, depending on the duration of pyrolysis. When capped with a layer of SiO 2 followed by pyrolysis, the lamellar nanodomains were converted to pod-like, spaghetti-like, or long worm-like carbon nanostructures. These carbon nanostructures were driven by controlling the surface or interface tension and the residual yield of solid carbonaceous species.

An ultrasensitive and highly efficient assay for real-time monitoring of nitric oxide (NO) at single-cell level based on a reduced graphene oxide (RGO) and iron-porphyrin-functionalized graphene (FGPCs) field-effect transistor (FET) biosensor is reported. A layer-to-layer assembly of RGO and FGPCs on a prefabricated FET sensor surface through π-π stacking interaction allowed superior electrical conductivity caused by RGO, and highly catalytic specificity induced by metalloporphyrin, ensuring the ultrasensitive and highly specific detection of NO. The results demonstrated that the RGO/FGPCs FET biosensor was capable of real-time monitoring of NO in the range from 1 pM to 100 nM with the limit of detection as low as 1 pM in phosphate-buffered saline (PBS) and 10 pM in the cell medium, respectively. Moreover, the developed biosensor could be used for real-time monitoring of NO released from human umbilical vein endothelial cells (HUVECs) at single-cell level. Along with its miniaturized sizes, ultrasensitive characteristics, and fast response, the FET biosensor is promising as a new platform for potential biological and diagnostic applications.

Effective isolation of circulating tumor cells (CTCs) has great significance for cancer research but is highly challenged. Here, we developed a microchip embedded with a three-dimensional (3D) PDMS scaffold by a quadratic-sacrificing template method for high-efficiency capture of CTCs. The microchip was gifted with a 3D interconnected macroporous structure, strong toughness, and excellent flexibility and transparency, enabling fast isolation and convenient observation of CTCs. Especially, 3D scaffold chip perfectly integrates the two main strategies currently used for enhancement of cell capture efficiency. Spatially distributed 3D scaffold compels cells undergoing chaotic or vortex migration in the channel, and the spatially distributed nanorough skeleton offers ample binding sites, which synergistically and significantly improve CTCs capture efficiency. Our results showed that 1-118 CTCs/mL were identified from 14 cancer patients' blood and 5 out of these cancer patients showed 1-14 CTC clusters/mL. This work demonstrates for the first time the development of microchip with transparent interconnected 3D scaffold for isolation of CTCs and CTC clusters, which may promote in-depth analysis of CTCs.

Isolation of single circulating tumor cells (CTCs) from patients is a very challenging technique that may promote the process of individualized antitumor therapies. However, there exist few systems capable of highly efficient capture and release of single CTCs with high viability for downstream analysis and culture. Herein, we designed a near-infrared (NIR) light-responsive substrate for highly efficient immunocapture and biocompatible site-release of CTCs by a combination of the photothermal effect of gold nanorods (GNRs) and a thermoresponsive hydrogel. The substrate was fabricated by imprinting target cancer cells on a GNR-pre-embedded gelatin hydrogel. Micro/nanostructures generated by cell imprinting produce artificial receptors for cancer cells to improve capture efficiency. Temperature-responsive gelatin dissolves rapidly at 37 °C; this allows bulk recovery of captured CTCs at physiological temperature or site-specific release of single CTCs by NIR-mediated photothermal activation of embedded GNRs. Furthermore, the system has been applied to capture, individually release, and genetically analyze CTCs from the whole blood of cancer patients. The multifunctional NIR-responsive platform demonstrates excellent performance in capture and site-release of CTCs with high viability, which provides a robust and versatile means toward individualized antitumor therapies and also shows promising potential for dynamically manipulating cell-substrate interactions in vitro.

The field-effect transistor (FET) biosensor has attracted extensive attentions, due to its unique features in detecting various biomolecules with high sensitivity and selectivity. However, currently used FET biosensors obtaining from expensive and elaborate micro/nanofabrication are always disposable because the analyte cannot be efficiently removed after detection. In this work, we established a photocatalysis-induced renewable graphene-FET (G-FET) biosensor for protein detection, by layer-to-layer assembling reduced graphene oxide (RGO) and RGO-encapsulated TiO2 composites to form a sandwiching RGO@TiO2 structure on a prefabricated FET sensor surface. After immobilization of anti-D-Dimer on the graphene surface, sensitive detection of D-Dimer was achieved with the detection limits of 10 pg/mL in PBS and 100 pg/mL in serum, respectively. Notably, renewal of the FET biosensor for recycling measurements was significantly realized by photocatalytically cleaning the substances on the graphene surface. This work demonstrates for the first time the development and application of photocatalytically renewable G-FET biosensor, paving a new way for G-FET sensor toward a plethora of diverse applications.

Biosensors always suffer from passivation that prevents their reutilization. To address this issue, photocatalytically renewable sensors composed of semiconductor photocatalysts and sensing materials have emerged recently. In this work, we developed a robust and versatile method to construct different kinds of renewable biosensors consisting of ZnO nanorods and nanostructured Au. Via a facile and efficient photochemical reduction, various nanostructured Au was obtained successfully on ZnO nanorods. As-prepared sensors concurrently possess excellent sensing capability and desirable photocatalytic cleaning performance. Experimental results demonstrate that dendritic Au/ZnO composite has the strongest surface-enhanced Raman scattering (SERS) enhancement, and dense Au nanoparticles (NPs)/ZnO composite has the highest electrochemical activity, which was successfully used for electrochemical detection of NO release from cells. Furthermore, both of the SERS and electrochemical sensors can be regenerated efficiently for renewable applications via photodegrading adsorbed probe molecules and biomolecules. Our strategy provides an efficient and versatile method to construct various kinds of highly sensitive renewable sensors and might expand the application of the photocatalytically renewable sensor in the biosensing area.

DNA methylation (5-methylcytosine, 5-mC) is the best characterized epigenetic mark that has regulatory roles in diverse biological processes. Recent investigation of RNA modifications also raises the possible functions of RNA adenine and cytosine methylations on gene regulation in the form of "RNA epigenetics." Previous studies demonstrated global DNA hypomethylation in tumor tissues compared to healthy controls. However, DNA and RNA methylation in circulating tumor cells (CTCs) that are derived from tumors are still a mystery due to the lack of proper analytical methods. In this respect, here we established an effective CTCs capture system conjugated with a combined strategy of sample preparation for the captured CTCs lysis, nucleic acids digestion, and nucleosides extraction in one tube. The resulting nucleosides were then further analyzed by liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS). With the developed method, we are able to detect DNA and RNA methylation (5-methyl-2'-deoxycytidine, 5-methylcytidine, and N(6)-methyladenosine) in a single cell. We then further successfully determined DNA and RNA methylation in CTCs from lung cancer patients. Our results demonstrated, for the first time, a significant decrease of DNA methylation (5-methyl-2'-deoxycytidine) and increase of RNA adenine and cytosine methylations (N(6)-methyladenosine and 5-methylcytidine) in CTCs compared with whole blood cells. The discovery of DNA hypomethylation and RNA hypermethylation in CTCs in the current study together with previous reports of global DNA hypomethylation in tumor tissues suggest that nucleic acid modifications play important roles in the formation and development of cancer cells. This work constitutes the first step for the investigation of DNA and RNA methylation in CTCs, which may facilitate uncovering the metastasis mechanism of cancers in the future.

Isolation of rare, pure, and viable circulating tumor cells (CTCs) provides a significant insight in early cancer diagnosis, and release of captured CTCs without damage for ex vivo culture may offer an opportunity for personalized cancer therapy. In this work, we described a biotin-triggered decomposable immunomagnetic system, in which peptide-tagged antibody designed by chemical conjugation was specifically immobilized on engineered protein-coated magnetic beads. The interaction between peptide and engineered protein can be reversibly destroyed by biotin treatment, making capture and release of CTCs possible. Furthermore, the peptide could mediate multiple antibodies' coimmobilization on engineered protein-coated magnetic beads, by which capture efficiency for CTCs was obviously improved. Quantitative results showed that 70% of captured cells could be released by biotin addition, and 85% of released cells remained viable. In addition, 79% of cancer cells spiked in human whole blood were captured and could also be successfully released for culture. Finally, immunomagnetic beads simultaneously loaded with anti-EpCAM, anti-HER2, and anti-EGFR were successfully applied to isolate and detect CTCs in 17 cancer patients' peripheral blood samples, and 2-215 CTCs were identified with high purity. These results suggest that our method is reliable and has great potential in CTC detection for CTC-based molecular profiling, diagnosis, and therapy.

Axons are very sensitive to molecular gradients and can discriminate extremely small differences in gradient steepness. Microfluidic devices capable of generating chemical gradients and adjusting their steepness could be used to quantify the sensitivity of axonal response. Here, we present a versatile and robust microfluidic device that can generate substrate-bound molecular gradients with evenly varying steepness on a single chip to precisely quantify axonal response. In this device, two solutions are perfused into a central channel via two inlets while partially flowing into two peripheral channels through interconnecting grooves, which gradually decrease the fluid velocity along the central channel. Molecular gradients with evenly and gradually decreased steepness can therefore be generated with a high resolution that is less than 0.05%/mm. In addition, the overall distribution range and resolution of the gradient steepness can be highly and flexibly controlled by adjusting various parameters of the device. Using this device, we quantified the hippocampal axonal response to substrate-bound laminin and ephrin-A5 gradients with varying steepnesses. Our results provided more detailed information on how and to what extent different steepnesses guide hippocampal neuron development during the initial outgrowth. Furthermore, our results show that axons can sensitively respond to very shallow laminin and ephrin-A5 gradients, which could effectively initiate biased differentiation of hippocampal neurons in the steepness range investigated in this study.

Early detection and isolation of circulating tumor cells (CTCs) can provide helpful information for diagnosis, and functional readouts of CTCs can give deep insight into tumor biology. In this work, we presented a new strategy for simple isolation and release of CTCs using engineered nanobioprobes. The nanobioprobes were constructed by Ca(2+)-assisted layer-by-layer assembly of alginate onto the surface of fluorescent-magnetic nanospheres, followed by immobilization of biotin-labeled anti-EpCAM. As-prepared anti-EpCAM-functionalized nanobioprobes were characterized with integrated features of anti-EpCAM-directed specific recognition, fluorescent magnetic-driven cell capture, and EDTA-assisted cell release, which can specifically recognize 10(2) SK-BR-3 cells spiked in 1 mL of lysed blood or human whole blood samples with 89% and 86% capture efficiency, respectively. Our proof-of-concept experiments demonstrated that 65% of captured SK-BR-3 cells were released after EDTA treatment, and nearly 70% of released SK-BR-3 cells kept their viability, which may facilitate molecular profiling and functional readouts of CTCs.

Over the past decades, various microfluidic devices have been developed to investigate the role of the molecular gradient in axonal development; however, there are very few devices providing quantitative information about the response of axons to molecular gradients with different slopes. Here, we propose a novel laminar-based microfluidic device enabling simultaneous generation of multiple gradients with gradually changed slope on a single chip. This device, with two asymmetrically designed peripheral channels and opposite flow direction, could generate gradients with gradually changed slope in the center channel, enabling us to investigate simultaneously the response of axons to multiple slope gradients with the same batch of neurons. We quantitatively investigated the response of axon growth rate and growth direction to substrate-bound laminin gradients with different slopes using this single-layer chip. Furthermore, we compartmented this gradient generation chip and a cell culture chip by a porous membrane to investigate quantitatively the response of axon growth rate to the gradient of soluble factor netrin-1. The results suggested that contacting with a molecular gradient would effectively accelerate neurites growth and enhance axonal formation, and the axon guidance ratio obviously increased with the increase of gradient slope in a proper range. The capability of generating a molecular gradient with continuously variable slopes on a single chip would open up opportunities for obtaining quantitative information about the sensitivity of axons and other types of cells in response to gradients of various proteins.

Electrochemical techniques based on ultramicroelectrodes (UMEs) play a significant role in real-time monitoring of chemical messengers' release from single cells. Conversely, precise monitoring of cells in vitro strongly depends on the adequate construction of cellular physiological microenvironment. In this paper, we developed a multilayer microdevice which integrated high aspect ratio poly(dimethylsiloxane) (PDMS) microfluidic device for long-term automated perfusion culture of cells without shear stress and an independently addressable microelectrodes array (IAMEA) for electrochemical monitoring of the cultured cells in real time. Novel design using high aspect ratio between circular "moat" and ring-shaped micropillar array surrounding cell culture chamber combined with automated "circular-centre" and "bottom-up" perfusion model successfully provided continuous fresh medium and a stable and uniform microenvironment for cells. Two weeks automated culture of human umbilical endothelial cell line (ECV304) and neuronal differentiation of rat pheochromocytoma (PC12) cells have been realized using this device. Furthermore, the quantal release of dopamine from individual PC12 cells during their culture or propagation process was amperometrically monitored in real time. The multifunctional microdevice developed in this paper integrated cellular microenvironment construction and real-time monitoring of cells during their physiological process, and would possibly provide a versatile platform for cell-based biomedical analysis.

Carbon fiber nanoelectrodes (tip diameter = ca. 100 nm) have been first used to monitor real-time dopamine release from single living vesicles of single rat pheochromocytoma (PC12) cells. The experiments show that active and inactive release sites exist on the surface of cells, and the spatial distributions have been differentiated even in the same active release zone. It is first demonstrated that multiple vesicles can sequentially release dopamine at the same site of the cell surface, which possibly plays the main role in the dopamine release from PC12 cells.