Search

Hundreds of different fast-growing Salix hybrids have been developed mainly for energy crops. In this paper, we studied water extracts from the bark of 15 willow hybrids and species as potential antimicrobial additives. Treatment of ground bark in water under mild conditions extracted 12-25% of the dry material. Preparative high-performance liquid chromatography is proven here as a fast and highly efficient tool in the small-scale recovery of raffinose from Salix bark crude extracts for structural elucidation. Less than half of the dissolved material was assigned by chromatographic (gas chromatography and liquid chromatography) and spectroscopic (mass spectrometry and nuclear magnetic resonance spectroscopy) techniques for low-molecular-weight compounds, including mono- and oligosaccharides (sucrose, raffinose, and stachyose) and aromatic phytochemicals (triandrin, catechin, salicin, and picein). The composition of the extracts varied greatly depending on the hybrid or species and the harvesting season. This information generated new scientific knowledge on the variation in the content and composition of the extracts between Salix hybrids and harvesting season depending on the desired molecule. The extracts showed high antibacterial activity on Staphylococcus aureus with a minimal inhibitory concentration (MIC) of 0.6-0.8 mg/mL; however, no inhibition was observed against Escherichia coli , Enterococcus faecalis, and Salmonella typhimurium . MIC of triandrin (i.e., 1.25 mg/mL) is reported for the first time. Although antibacterial triandrin and (+)-catechin were present in extracts, clear correlation between the antibacterial effect and the chemical composition was not established, which indicates that antibacterial activity of the extracts mainly originates from some not yet elucidated substances. Aquatic toxicity and mutagenicity assessments showed the safe usage of Salix water extracts as possible antibacterial additives.

The current work studies the reductive catalytic depolymerization (RCD) of lignin from a novel semi-industrial process. The aim was to obtain aromatic mono-, di-, tri-, and tetramers for further valorization. The substrate and products were characterized by multiple analytical methods, including high pressure size-exclusion chromatography (HPSEC), gas chromatography-mass spectrometry, GC-flame ionization detector (FID), GC-FID/thermal conductivity detector (TCD), and NMR. The RCD was studied by exploring the influence of different parameters, such as lignin solubility, reaction time, hydrogen pressure, reaction temperature, pH, type and loading of the catalyst, as well as type and composition of the organic/aqueous solvent. The results show that an elevated temperature, a redox catalyst, and a hydrogen atmosphere are essential for the depolymerization and stability of the products, while the reaction medium also plays an important role. The highest obtained mono- to tetramers yield was 98% and mono- to dimers yield over 85% in the liquid phase products. The reaction mechanisms influenced the structure of the aliphatic chain in the monomers, but left the phenolic structure along with the methoxy groups largely unaltered. The current work contributes to the development and debottlenecking of the novel and sustainable overall process, which utilizes efficiently all the fractions of wood, in line with the principles of green engineering and chemistry., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

Hydrodeoxygenation (HDO) of isoeugenol (IE) was investigated using bimetallic iridium-rhenium and platinum-rhenium catalysts supported on alumina in the temperature and pressure ranges of 200-250 °C and 17-40 bar in nonpolar dodecane as a solvent. The main parameters were catalyst type, hydrogen pressure, and initial concentration. Nearly quantitative yield of the desired product, propylcyclohexane (PCH), at complete conversion in 240 min was obtained with Ir-Re/Al 2 O 3 prepared by the deposition-precipitation method using 0.1 mol/L IE initial concentration. High iridium dispersion together with a modification effect of rhenium provided in situ formation of the IrRe active component with reproducible catalytic activity for selective HDO of IE to PCH. The reaction rate was shown to increase with the increasing initial IE concentration promoting also HDO and giving a higher liquid phase mass balance. Increasing hydrogen pressure benefits the PCH yield., Competing Interests: The authors declare no competing financial interest.

Water-soluble O-acetyl galactoglucomannan (GGM) is a softwood-derived polysaccharide, which can be extracted on an industrial scale from wood or mechanical pulping waters and now is available in kilogram scale for research and development of value-added products. To develop applications of GGM, information is needed on its stability in acidic conditions. The kinetics of acid hydrolysis of GGM was studied at temperatures up to 90 degrees C in the pH range of 1-3. Molar mass and molar mass distribution were determined using size exclusion chromatography with multiangle laser light scattering and refractive index detection. The molar mass of GGM decreased considerably with treatment time at temperatures above 70 degrees C and pH below 2. The molar mass distribution broadened with hydrolysis time. A first-order kinetic model was found to match the acid hydrolysis. The reaction rate constants at various pH values and temperatures were calculated on the basis of the first-order kinetic model. Furthermore, the activation energy, E, was obtained from the Arrhenius plot. The activation energy E was 150 kJ mol (-1) for acid hydrolysis of spruce GGM. The apparent rate constant during acid hydrolysis increased by a factor of 10 with a decrease in pH by 1 unit, regardless of temperature. In addition, gas chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry were applied to study the released GGM monomers and oligomers.

The antioxidant potency and the radical scavenging capacity of superoxide and peroxyl radicals were assessed for 13 hydrophilic knotwood extracts of commercially important wood species, or fractions thereof, as well as for five pure wood-derived lignans and the flavonoid taxifolin. The chemical composition of the knotwood extracts was determined by gas chromatography combined with mass spectrometry. Most of the investigated wood species were rich in hydrophilic extractives (10-20% of the dry wood) with one or a few compounds dominating in each extract. All extracts had a high antioxidative potency and/or radical scavenging capacity as compared to the well-known antioxidants Trolox and butylated hydroxyanisole. The pure wood-derived lignans and taxifolin also had a high antioxidative potency and/or radical scavenging capacity. However, the antioxidant potency and/or radical scavenging capacity of several of the hydrophilic knotwood extracts were higher than that of the dominating compounds in pure form.