Search

Polycrystalline samples and single crystals of four members of the new complex boride series Ti3−xRu5−yIryB2+x (0 ≤ x ≤ 1 and 1 < y < 3) were synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere. The new silvery phases were structurally characterized by powder and single-crystal X-ray diffraction as well as energy- and wavelength-dispersive X-ray spectroscopy analyses. They crystallize with the tetragonal Ti3Co5B2 structure type in space group P4/mbm (No. 127). Tetragonal prisms of Ru/Ir atoms are filled with titanium in the boron-poorest phase (Ti3Ru2.9Ir2.1B2). Gradual substitution of titanium by boron then results in the successive filling of this site by a Ti/B mixture en route to the complete boron occupation, leading to the boron-richest phase (Ti2Ru2.8Ir2.2B3). Furthermore, both ruthenium and iridium share two sites in these structures, but a clear Ru/Ir site preference is found. First-principles density functional theory calculations (Vienna ab initio simulation package) on appropriate structural models (using a supercell approach) have provided more evidence on the stability of the boron-richest and -poorest phases, and the calculated lattice parameters corroborate very well with the experimentally found ones. Linear muffin-tin orbital atomic sphere approximation calculations further supported these findings through crystal orbital Hamilton population bonding analyses, which also show that the Ru/Ir−B and Ru/Ir−Ti heteroatomic interactions are mainly responsible for the structural stability of these compounds. Furthermore, some stable and unstable phases of this complex series could be predicted using the rigid-band model. According to the density of states analyses, all phases should be metallic conductors, as was expected from these metal-rich borides. [ABSTRACT FROM AUTHOR]

Polycrystalline samples and single crystals of the complex boride Ti9Fe2Ru18B8 were synthesized by arc-melting the elements and characterized by single-crystal X-ray diffraction and energy-dispersive X-ray analysis. Ti9Fe2Ru18B8 is a new substitutional variant of the Zn11Rh18B8 structure type, space group P4/mbm (No. 127), whose remarkable feature is that it contains one-dimensional chains of dumbbells of magnetically active Fe atoms, which form "ladders" along the c axis. The Fe-Fe distance within a dumbbell is 2.489(2) Å, and the Fe2-Fe2 distance between two dumbbells is 2.968(1) Å; in contrast, the chains are well-separated from each other by distances of at least 11.217(2) Å. According to the results of tight-binding electronic structure calculations, Ru-B and Ti-Ru contacts are responsible for the structural robustness, while Fe-Fe interactions influence the magnetic behavior, According to magnetization measurements, Ti9Fe2Ru18B8 orders ferromagnetically between 10 and 200 K. A model for ferromagnetism in this ladder-based structure identifies ferromagnetic coupling among neighboring spin-triplet Fe2 dimers along the c axis as the origin of the magnetic behavior. [ABSTRACT FROM AUTHOR]

The metal borides, Hf 2 MOs 5 B 2 (M = Mn, Fe, Co), which are the first Os-rich quaternary variants of the prolific Ti 3 Co 5 B 2 structure type, were investigated computationally and experimentally. In their crystal structures, osmium builds a network of prisms, in which the other elements are located. The magnetic M elements are found in face-connected Os 8 square prisms leading to M-chains with intra- and interchain distances of about 3.0 and 6.5 Å, respectively. Density functional theory (DFT) showed that magnetic ordering is hugely favored for M = Mn and Fe but only slightly favored for M = Co. Experimental investigations then confirmed and extended the DFT predictions as a metamagnetic behavior was found for the M = Mn and Fe phases, whereby the antiferromagnetic interactions ( T N = 19 and 90 K) found at low magnetic fields change to ferromagnetic at higher fields. A very broad transition ( T N = 45 K) is found for M = Co, suggesting spin-glass behavior for this phase. For M = Fe, a hard-magnet hysteresis at 5 K is found with a 40 kA/m coercivity, and even at room temperature, a significant hysteresis is found. This study paves the way for the discovery of Os-based magnets in this structure type and other intermetallics.

The complex metal-rich boride Ti 5- x Fe 1- y Os 6+ x+y B 6 (0 < x , y < 1), crystallizing in a new structure type (space group Cmcm , no. 63), was prepared by arc-melting. The new structure contains both isolated boron atoms and zigzag boron chains (B-B distance of 1.74 Å), a rare combination among metal-rich borides. In addition, the structure also contains Fe-chains running parallel to the B-chains. Unlike in previously reported structures, these Fe-chains are offset from each other and arranged in a triangular manner with intrachain and interchain distances of 2.98 and 6.69 Å, respectively. Density functional theory (DFT) calculations predict preferred ferromagnetic interactions within each chain but only small energy differences for different magnetic interactions between them, suggesting a potentially weak long-range order. This new structure offers the opportunity to study new configurations and interactions of magnetic elements for the design of magnetic materials.

Designing new rare-earth-free (REF) permanent magnetic materials (PMM) to replace the high performing but critically restrained rare-earth-based PMM remains a great challenge to the scientific community. Here, we report on the rational design of new REF PMM, Hf 2 M Ir 5 B 2 ( M = Fe, Mn) via a theory-experiment combined approach. Density functional theory (DFT) predicted strong interchain M - M spin-exchange coupling and large magnetocrystalline anisotropy energies ( E MAE ) for the new compounds, suggesting potential intrinsic PMM properties. Subsequent experimental bulk syntheses and magnetic characterizations established the highest ordering temperature ( T C ∼ 900 K) for Hf 2 FeIr 5 B 2 and the highest intrinsic coercivity ( H C ) value for Hf 2 MnIr 5 B 2 ( H C = 62.1 kA/m) reported to date for Ti 3 Co 5 B 2 -type compounds. Importantly, at room temperature both phases show significant coercivities due to intrinsic factors only, hinting at their huge potential to create REF PMM by improving extrinsic factors such as controlling the microstructure and the domain orientation.

Among van der Waals (vdW) layered ferromagnets, Fe 3 GeTe 2 (FGT) is an excellent candidate material to form FGT/heavy metal heterostructures for studying the effect of spin-orbit torques (SOT). Its metallicity, strong perpendicular magnetic anisotropy built in the single atomic layers, relatively high Curie temperature ( T c ∼ 225 K), and electrostatic gate tunability offer a tantalizing possibility of achieving the ultimate high SOT limit in monolayer all-vdW nanodevices. In this study, we fabricate heterostructures of FGT/Pt with 5 nm of Pt sputtered onto the atomically flat surface of ∼15-23 nm exfoliated FGT flakes. The spin current generated in Pt exerts a damping-like SOT on FGT magnetization. At ∼2.5 × 10 11 A/m 2 current density, SOT causes the FGT magnetization to switch, which is detected by the anomalous Hall effect of FGT. To quantify the SOT effect, we measure the second harmonic Hall responses as the applied magnetic field rotates the FGT magnetization in the plane. Our analysis shows that the SOT efficiency is comparable with that of the best heterostructures containing three-dimensional (3D) ferromagnetic metals and much larger than that of heterostructures containing 3D ferrimagnetic insulators. Such large efficiency is attributed to the atomically flat FGT/Pt interface, which demonstrates the great potential of exploiting vdW heterostructures for highly efficient spintronic nanodevices.

Materials "design" is increasingly gaining importance in the solid-state materials community in general and in the field of magnetic materials in particular. Density functional theory (DFT) predicted the competition between ferromagnetic (FM) and antiferromagnetic (AFM) ground states in a ruthenium-rich Ti 3 Co 5 B 2 -type boride (Hf 2 MnRu 5 B 2 ) for the first time. Vienna ab initio simulation package (VASP) total energy calculations indicated that the FM model was marginally more stable than one of the AFM models (AFM1), indicating very weak interactions between magnetic 1D Mn chains that can be easily perturbated by external means (magnetic field or composition). The predicted phase was then synthesized by arc-melting and characterized as Hf 2 Mn 1-x Ru 5+x B 2 (x = 0.27). Vibrating-scanning magnetometry shows an AFM ground state with T N ≈ 20 K under low magnetic field (0.005 T). At moderate-to-higher fields, AFM ordering vanishes while FM ordering emerges with a Curie temperature of 115 K. These experimental outcomes confirm the weak nature of the interchain interactions, as predicted by DFT calculations.

Two different boron layers, flat (graphene-like) and puckered (phosphorene-like), found in the crystal structure of Mo 2 B 4 show drastically different activities for hydrogen evolution, according to Gibbs free energy calculations of H-adsorption on Mo 2 B 4 . The graphene-like B layer is highly active, whereas the phosphorene-like B layer performs very poorly for hydrogen evolution. A new Sn-flux synthesis permits the rapid single-phase synthesis of Mo 2 B 4 , and electrochemical analyses show that it is one of the best hydrogen evolution reaction active bulk materials with good long-term cycle stability under acidic conditions. Mo 2 B 4 compensates its smaller density of active sites if compared with highly active bulk MoB 2 (which contains only the more active graphene-like boron layers) by a 5-times increase of its surface area.

We report the electrochemical intercalation-extraction of aluminum (Al) in the layered TiS 2 and spinel-based cubic Cu 0.31 Ti 2 S 4 as the potential cathode materials for rechargeable Al-ion batteries. The electrochemical characterizations demonstrate the feasibility of reversible Al intercalation in both titanium sulfides with layered TiS 2 showing better properties. The crystallographic study sheds light on the possible Al intercalation sites in the titanium sulfides, while the results from galvanostatic intermittent titration indicate that the low Al 3+ diffusion coefficients in the sulfide crystal structures are the primary obstacle to facile Al intercalation-extraction.

Na 2 Au 3 Al, the first experimentally prepared compound in the ternary Na-Au-Al system, crystallizes in the cubic crystal system with space group P4 1 32 (a = 771.42(2) pm). It can be described as a P-centered ternary ordered variant of the F-centered Laves phase MgCu 2 and is isostructural to Mo 3 Al 2 C. A phase width was found for the series Na 2 Au 4-x Al x allowing a successive substitution of Au by Al. The primitive structure forms for x ≥ 0.5. Na 2 Au 3 Al is diamagnetic at room temperature but metallic in nature, as seen from susceptibility and electrical resistivity measurements. Band structure calculations and X-ray photoelectron spectroscopy confirm the metallic nature of the title compound as states are found at the Fermi level of the DOS, along with its "auride" character. 23 Na and 27 Al solid-state-NMR investigations show the existence of both a disordered (x = 0.5 and 0.75) and a fully ordered (x = 1.0) representative within this series. Both COHP and Bader charge analyses suggest the presence of strong Au-Al interactions forming an anionic [Au 3 Al] δ- network, with the Na cations occupying the cavities.

The new quaternary boride series FeRh 6-n Ru n B 3 (n = 1-5) was synthesized by arc melting and characterized by powder and single-crystal X-ray diffraction (XRD), energy-dispersive X-ray analysis, and superconducting quantum interference device magnetometry. Single-crystal structure refinement showed the distribution of the iron atoms in two of three possible crystallographic 4d metal sites in the structure (Th 7 Fe 3 -type, space group P6 3 mc). Rietveld refinements of the powder XRD data indicated single-phase synthesis of all the members. A linear decrease of the lattice parameters and the unit cell volume with increasing Ru content was found, indicating Vegard's behavior. Susceptibility measurements show decreasing Curie temperature and magnetic moment (μ a ) recorded at 5 T with increasing Ru content from T 5T ) recorded at 5 T with increasing Ru content from T C = 295 K and μ a 5T = 3.35 μ B ) to T 5 RuB 3 ) to T C = 205 K and μ a 5T = 0.70 μ B (FeRhRu 5 B 3 ). The measured coercivities lie between 1.0 and 2.2 kA/m indicating soft to semihard magnetic materials.

The intermetallic compound EuAu3Al2 has been prepared by reaction of the elements in tantalum ampules. The structure was refined from single-crystal data, indicating that the title compound crystallizes in the orthorhombic crystal system (a = 1310.36(4), b = 547.87(1), c = 681.26(2) pm) with space group Pnma (wR2 = 0.0266, 1038 F(2) values, 35 parameters) and is isostructural to SrAu3Al2 (LT-SrZn5 type). Full ordering of the gold and aluminum atoms was observed. Theoretical calculations confirm that the title compound can be described as a polar intermetallic phase containing a polyanionic [Au3Al2](δ-) network featuring interconnected strands of edge-sharing [AlAu4] tetrahedra. Magnetic measurements and (151)Eu Mössbauer spectroscopic investigations confirmed the divalent character of the europium atoms. Ferromagnetic ordering below TC = 16.5(1) K was observed. Heat capacity measurements showed a λ-type anomaly at T = 15.7(1) K, in line with the ordering temperature from the susceptibility measurements. The magnetocaloric properties of EuAu3Al2 were determined, and a magnetic entropy of ΔSM = -4.8 J kg(-1) K(-1) for a field change of 0 to 50 kOe was determined. Band structure calculations found that the f-bands of Eu present at the Fermi level of non-spin-polarized calculations are responsible for the ferromagnetic ordering in this phase, whereas COHP chemical bonding coupled with Bader charge analysis confirmed the description of the structure as covalently bonded polyanionic [Au3Al2](δ-) network interacting ionically with Eu(δ+).

Spin-frustrated chains of Cr3 triangles are found in the new metal boride TiCrIr2B2 by synergistic experimental and theoretical investigations. Although magnetic ordering is found at 275 K, competing ferro- and anti-ferromagnetic interactions coupled with spin frustration induce a rather small total magnetic moment (0.05 μB at 5 T), and density functional theory (DFT) calculations propose a canted, nonlinear magnetic ground-state ordering in the new phase. TiCrIr2B2 crystallizes in the hexagonal Ti1+xOs2-xRuB2 structure type (space group P6̅2m, No. 189, Pearson symbol hP18). The structure contains trigonal planar B4 boron fragments with B-B distances of 1.76(3) Å alternating along the c-direction with Cr3 triangles with intra- and intertriangle Cr-Cr distances of 2.642(9) and 3.185(1) Å, respectively. Magnetization measurements of TiCrIr2B2 reveal ferrimagnetic behavior and a large, negative Weiss constant of -750 K. DFT calculations demonstrate a strong site preference of Cr for the triangle sites, as well as magnetic frustration due to indirect anti-ferromagnetic interactions within the Cr3 triangles.

Ba3Pt4Al4 was prepared from the elements in niobium ampules and crystallizes in an orthorhombic structure, space group Cmcm (oP44, a = 1073.07(3), b = 812.30(3), c = 1182.69(3) pm) isopointal to the Zintl phase A2Zn5As4 (A = K, Rb). The structure features strands of distorted [Pt4Al4] heterocubane-like units connected by condensation over Pt/Al edges. These are arranged in a hexagonal rod packing by further condensation over Pt and Al atoms with the barium atoms located inside cavities of the [Pt4Al4](δ-) framework. Structural relaxation confirmed the electronic stability of the new phase, while band structure calculations indicate metallic behavior. Crystal orbital Hamilton bonding analysis coupled with Bader effective charge analysis suggest a polar intermetallic phase in which strong Al-Pt covalent bonds are present, while a significant electron transfer from Ba to the [Pt4Al4](δ-) network is found. By X-ray photoelectron spectroscopy measurements the Pt 4f5/2 and 4f7/2 energies for Ba3Pt4Al4 were found in the range of those of elemental Pt due to the electron transfer of Ba, while PtAl and PtAl2 show a pronounced shift toward a more cationic platinum state. (27)Al magic-angle spinning NMR investigations verified the two independent crystallographic Al sites with differently distorted tetrahedrally coordinated [AlPt4] units. Peak assignments could be made based on both geometrical considerations and in relation to electric field gradient calculations.

Analysis of the electronic density of states of the hypothetical ternary double-perovskite-like phases "Sc2T6B (T = Ir, Pd, Ni)" reveals the presence of deep and large pseudogaps between 61 and 68 valence electrons (VE) as well as a strong peak at 69 VEs. Subsequently, crystal orbital Hamilton population (COHP) bonding analysis shows that the heteroatomic T-B and Sc-T interactions are optimized in Sc2Ir6B (63 VE) but not in "Sc2Pd6B (69 VE)" and "Sc2Ni6B (69 VE)", thus indicating less stability for these VE-richer phases. These findings point out the possibility of discovering new double-perovskite-like borides through chemical substitution and lead to the study of the Sc2Ir6-xPdxB and Sc2Ir6-xNixB (x = 0-6; VE = 63-69) series, for which powder samples and single crystals were synthesized by arc melting the elements. Superstructure reflections were observed in the powder diffractograms of Sc2Ir6-xPdxB and Sc2Ir6-xNixB for x = 0-5 and VE = 63-68, thereby showing that these phases crystallize in the double-perovskite-like Ti2Rh6B-type structure (space group Fm3̅m, Z = 4). Single-crystal and Rietveld refinement results confirm and extend these findings because Pd (or Ni) is found to mix exclusively with Ir in all quaternary compositions. For x = 6, no superstructure reflections were observed, in accordance with the theoretical expectation for the 69 VE phases.

Members of the solid solution series of CeRu(1-x)Ni(x)Al can be obtained directly by arc melting of the elements. The presented compounds with 0.1 ≤ x ≤ 0.85 crystallize in the orthorhombic space group Pnma (No. 62) in the LaNiAl structure type, while for 0.9 ≤ x ≤ 1, the hexagonal ZrNiAl-type structure is found. The orthorhombic members exhibit an anomaly in the trend of the lattice parameters as well as an interesting behavior of the magnetic susceptibility, suggesting that the cerium cations exhibit no local moment. Besides the mixed-valent nature of the cerium cations, valence fluctuations along with a change in the cerium oxidation state depending on the nickel content have been found. The oxidation state has been determined from the magnetic data and additionally by XANES. Density functional theory calculations have identified the shortest Ce-Ru interaction as decisive for the stability of the orthorhombic solid solution.

Single-phase polycrystalline samples of the compounds MRh(6)B(3) (M = Fe, Co) as well as single crystals of CoRh(6)B(3) have been synthesized by arc-melting the elements under a purified argon atmosphere in a water-cooled copper crucible. The characterization of the new phases was achieved by using single-crystal and powder X-ray diffraction as well as EDX measurements. The two phases are isotypic and crystallize in the hexagonal Th(7)Fe(3) structure type (space group P6(3)mc, no. 186, Z = 2). In this structure, the magnetically active atoms (Fe, Co) are preferentially found on only one of the three available rhodium sites, and together with rhodium they build a three-dimensional network of interconnected (Rh/M)(3) triangles. Magnetic properties investigations show that both phases order ferromagnetically below Curie temperatures of 240 K (for FeRh(6)B(3)) and 150 K (for CoRh(6)B(3)). First-principles DFT calculations correctly reproduce not only the lattice parameters but also the ground state magnetic ordering in the two phases. These calculations also show that the long-range magnetic ordering in both phases occurs via indirect ferromagnetic coupling between the iron atoms mediated by rhodium. This magnetic structural model also predicts the saturation magnetizations to be 4.02 μ(B) for FeRh(6)B(3) (3.60 μ(B) found experimentally) and 2.75 μ(B) for CoRh(6)B(3). Furthermore, both phases are predicted to be metallic conductors as expected for these intermetallic borides.

Polycrystalline samples and single crystals of four members of the new complex boride series Ti(3-x)Ru(5-y)Ir(y)B(2+x) (0 ≤ x ≤ 1 and 1 < y < 3) were synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere. The new silvery phases were structurally characterized by powder and single-crystal X-ray diffraction as well as energy- and wavelength-dispersive X-ray spectroscopy analyses. They crystallize with the tetragonal Ti(3)Co(5)B(2) structure type in space group P4/mbm (No. 127). Tetragonal prisms of Ru/Ir atoms are filled with titanium in the boron-poorest phase (Ti(3)Ru(2.9)Ir(2.1)B(2)). Gradual substitution of titanium by boron then results in the successive filling of this site by a Ti/B mixture en route to the complete boron occupation, leading to the boron-richest phase (Ti(2)Ru(2.8)Ir(2.2)B(3)). Furthermore, both ruthenium and iridium share two sites in these structures, but a clear Ru/Ir site preference is found. First-principles density functional theory calculations (Vienna ab initio simulation package) on appropriate structural models (using a supercell approach) have provided more evidence on the stability of the boron-richest and -poorest phases, and the calculated lattice parameters corroborate very well with the experimentally found ones. Linear muffin-tin orbital atomic sphere approximation calculations further supported these findings through crystal orbital Hamilton population bonding analyses, which also show that the Ru/Ir-B and Ru/Ir-Ti heteroatomic interactions are mainly responsible for the structural stability of these compounds. Furthermore, some stable and unstable phases of this complex series could be predicted using the rigid-band model. According to the density of states analyses, all phases should be metallic conductors, as was expected from these metal-rich borides.

Polycrystalline samples and single crystals of the complex boride Ti9Fe2Ru18B8 were synthesized by arc-melting the elements and characterized by single-crystal X-ray diffraction and energy-dispersive X-ray analysis. Ti9Fe2Ru18B8 is a new substitutional variant of the Zn11Rh18B8 structure type, space group P4/mbm (No. 127), whose remarkable feature is that it contains one-dimensional chains of dumbbells of magnetically active Fe atoms, which form "ladders" along the c axis. The Fe-Fe distance within a dumbbell is 2.489(2) A, and the Fe2-Fe2 distance between two dumbbells is 2.968(1) A; in contrast, the chains are well-separated from each other by distances of at least 11.217(2) A. According to the results of tight-binding electronic structure calculations, Ru-B and Ti-Ru contacts are responsible for the structural robustness, while Fe-Fe interactions influence the magnetic behavior. According to magnetization measurements, Ti9Fe2Ru18B8 orders ferromagnetically between 10 and approximately 200 K. A model for ferromagnetism in this ladder-based structure identifies ferromagnetic coupling among neighboring spin-triplet Fe2 dimers along the c axis as the origin of the magnetic behavior.