Search

The self-assembly of micellar structures from diblock polymers that contain hydrophilic and hydrophobic domains has been of great interest for the encapsulation of drugs and other hydrophobic molecules. While most commercially used surfactants are derived from hydrocarbon sources, there have been recent efforts to replace these with biodegradable, nontoxic, biologically synthesized alternatives. Previous examples have primarily examined naturally occurring self-assembling proteins, such as silk and elastin-like sequences. Herein, we describe a new series of fusion proteins that have been developed to self-assemble spontaneously into stable micelles that are 27 nm in diameter after enzymatic cleavage of a solubilizing protein tag. The sequences of the proteins are based on a human intrinsically disordered protein, which has been appended with a hydrophobic segment. The micelles were found to form across a broad range of pH, ionic strength, and temperature conditions, with critical micelle concentration (CMC) values in the low micromolar range, 3 orders of magnitude lower than the CMC of commonly used surfactant sodium dodecyl sulfate (SDS). The reported micelles were found to solubilize hydrophobic metal complexes and organic molecules, suggesting their potential suitability for catalysis and drug delivery applications. Furthermore, the inherent flexibility in the design of these protein sequences enables the encoding of additional functionalities for many future applications. Overall, this work represents a new biomolecular alternative to traditional surfactants that are based on nonrenewable and poorly biodegradable hydrocarbon sources.

Vesicle formation in a series of amphiphilic sequence-defined polypeptoid block co-polymers comprising a phosphonated hydrophilic block and an amorphous hydrophobic block, poly- N-(2-ethyl)hexylglycine- block-poly- N-phosphonomethylglycine (pNeh- b-pNpm), is studied. The hydrophobic/hydrophilic block ratio was varied keeping the total chain length of the co-polymers constant. A new approach for characterizing the vesicle membrane morphology based on low-dose cryogenic electron microscopy (cryo-EM) is described. The individual low-dose micrographs cannot be interpreted directly due to low signal-to-noise ratio. Sorting and averaging techniques, developed in the context of protein structure determination, were thus applied to vesicle micrographs. Molecular dynamic simulations of the vesicles were used to establish the relationship between membrane morphology and averaged cryo-EM images. This approach enables resolution of the local thickness of the hydrophobic membrane core at the 1 nm length scale. The thickness of the hydrophobic core of the pNeh- b-pNpm membranes increases linearly with the length of the hydrophobic block.

Current approaches to nanoscale therapeutic delivery rely on the attachment of a drug of interest to a nanomaterial scaffold that is capable of releasing the drug selectively in a tumor environment. One class of nanocarriers receiving significant attention is protein nanomaterials, which are biodegradable and homogeneous in morphology and can be equipped with multiple functional handles for drug attachment. Although most protein-based nanocarriers are spherical in morphology, recent research has revealed that nonspherical nanomaterials may have favorable tumor uptake in comparison to their spherical counterparts. It is therefore important to expand the number of nonspherical protein-based nanocarriers that are available. Herein, we report the development of a self-assembling nanoscale disk derived from a double arginine mutant of recombinantly expressed tobacco mosaic virus coat protein (RR-TMV). RR-TMV disks display highly stable double-disk assembly states. These RR-TMV disks were functionalized with the chemotherapy drug doxorubicin (DOX) and further modified with polyethylene glycol (PEG) for improved solubility. RR-TMV DOX-PEG displayed cytotoxic properties similar to those of DOX alone when incubated with U87MG glioblastoma cells, but unmodified RR-TMV did not cause any cytotoxicity. The RR-TMV disk assembly represents a promising protein-based nanomaterial for applications in drug delivery.

Polymers that conduct protons in the hydrated state are of crucial importance in a wide variety of clean energy applications such as hydrogen fuel cells and artificial photosynthesis. Phosphonated and sulfonated polymers are known to conduct protons at low water content. In this paper, we report on the synthesis phosphonated peptoid diblock copolymers, poly- N -(2-ethyl)hexylglycine- block -poly- N -phosphonomethylglycine (pNeh- b -pNpm), with volume fractions of pNpm (ϕ Npm ) values ranging from 0.13 to 0.44 and dispersity ( Đ ) ≤ 1.0003. The morphologies of the dry block copolypeptoids were determined by transmission electron microscopy and in both the dry and hydrated states by synchrotron small-angle X-ray scattering. Dry samples with ϕ Npm > 0.13 exhibited a lamellar morphology. Upon hydration, the lowest molecular weight sample transitioned to a hexagonally packed cylinder morphology, while the others maintained their dry morphologies. Water uptake of all of the ordered samples was 8.1 ± 1.1 water molecules per phosphonate group. In spite of this, the proton conductivity of the ordered pNeh- b -pNpm copolymers ranged from 0.002 to 0.008 S/cm. We demonstrate that proton conductivity is maximized in high molecular weight, symmetric pNeh- b -pNpm copolymers.

Hydrated membranes with cocontinuous hydrophilic and hydrophobic phases are needed to transport protons in hydrogen fuel cells. Herein we study the water uptake and proton conductivity of a model fuel cell membrane comprising a triblock copolymer, polystyrenesulfonate-block-polyethylene-block-polystyrenesulfonate (S-SES), as a function of water activity in both humid air and liquid water. We demonstrate that the water uptake and proton conductivity of S-SES membranes equilibrated in liquid water are fundamentally different from values obtained when they were equilibrated in humid air. The morphological underpinnings of our observations were determined by synchrotron small-angle X-ray scattering and cryogenic scanning transmission electron microscopy. A discontinuous increase in conductivity when nearly saturated humid air is replaced with liquid water coincides with the emergence of heterogeneity in the hydrated channels: a water-rich layer is sandwiched between two polymer-rich brushes. While the possibility of obtaining heterogeneous hydrated channels in polymer electrolyte membranes has been discussed extensively, to our knowledge, this is the first time that direct evidence for the formation of water-rich subdomains is presented.

This is a study of morphology, water uptake, and proton conductivity of a sulfonated polystyrene-block-polyethylene (PSS-PE) copolymer equilibrated in humid air with controlled relative humidity (RH), and in liquid water. Extrapolation of the domain size, water uptake, and conductivity obtained in humid air to RH = 100% allowed for an accurate comparison between the properties of PSS-PE hydrated in saturated vapor and in liquid water. We demonstrate that extrapolations of domain size and water uptake on samples equilibrated in humid air are consistent with measurements on samples equilibrated in liquid water. Small (5%) differences in proton conductivity were found in samples equilibrated in humid air and liquid water. We argue that differences in transport coefficients in disordered heterogeneous systems, particularly small differences, present no paradox whatsoever. Schroeder's Paradox, wherein properties of polymers measured in saturated water vapor are different from those obtained in liquid water, is thus not observed in the PSS-PE sample.

Despite increasing demands to employ amphiphilic micelles as nanocarriers and nanoreactors, it remains a significant challenge to simultaneously reduce the particle size and enhance the particle stability. Complementary to covalent chemical bonding and attractive intermolecular interactions, entropic repulsion can be incorporated by rational design in the headgroup of an amphiphile to generate small micelles with enhanced stability. A new family of amphiphilic peptide-polymer conjugates is presented where the hydrophilic headgroup is composed of a 3-helix coiled coil with poly(ethylene glycol) attached to the exterior of the helix bundle. When micelles form, the PEG chains are confined in close proximity and are compressed to act as a spring to generate lateral pressure. The formation of 3-helix bundles determines the location and the directionalities of the force vector of each PEG elastic spring so as to slow down amphiphile desorption. Since each component of the amphiphile can be readily tailored, these micelles provide numerous opportunities to meet current demands for organic nanocarriers with tunable stability in life science and energy science. Furthermore, present studies open new avenues to use energy arising from entropic polymer chain deformation to self-assemble energetically stable, single nanoscopic objects, much like repulsion that stabilizes bulk assemblies of colloidal particles.

One of the factors hindering the development of technologies that rely on the use of proton-conducting polyelectrolyte membranes is the lack of control over the membrane morphology on the nanoscale. Of particular importance is the rearrangement and clustering of acidic groups, which may seriously degrade the electrical properties. Although electron microscopy is capable of imaging the morphology of the clusters, images of unmodified membranes with sufficient quality to discriminate between different proposed cluster morphology models have not been presented. Here we show the first determination of the cluster size distribution in a model polymer electrolyte membrane from electron micrographs of individual acidic clusters. Imaging of the sulfur-rich clusters by dark-field microscopy was facilitated by the spontaneous formation of thin, cluster-containing layers on the top and bottom surfaces of free-standing films with a thickness of ~35 nm., (© 2011 American Chemical Society)

Energy-filtered transmission electron microscopy (EFTEM) was used to determine the distribution of lithium ions in solid polymer electrolytes for lithium batteries. The electrolytes of interest are mixtures of bis(trifluoromethane)sulfonimide lithium salt and symmetric poly(styrene-block-ethylene oxide) copolymers (SEO). In contrast to current solid and liquid electrolytes, the conductivity of SEO/salt mixtures increases with increasing molecular weight of the copolymers. EFTEM results show that the salt is increasingly localized in the middle of the poly(ethylene oxide) (PEO) lamellae as the molecular weight of the copolymers is increased. Calculations of the inhomogeneous local stress field in block copolymer microdomains, modeled using self-consistent field theory, provide a quantitative explanation for this observation. These stresses, which increase with increasing molecular weight, interfere with the ability of PEO chains to coordinate with lithium cations near the walls of the PEO channels where ion mobility is expected to be low.

We establish a new systematic methodology for controlling the water retention of polymer electrolyte membranes. Block copolymer membranes comprising hydrophilic phases with widths ranging from 2 to 5 nm become wetter as the temperature of the surrounding air is increased at constant relative humidity. The widths of the moist hydrophilic phases were measured by cryogenic electron microscopy experiments performed on humid membranes. Simple calculations suggest that capillary condensation is important at these length scales. The correlation between moisture content and proton conductivity of the membranes is demonstrated.