Search

Modulating the migration of interfacial carriers in heterojunctions is critical for driving the signal response of high-performance optical biosensors. In this study, a polarity-switchable photoelectrochemical (PEC) and nanozyme-enabled colorimetric dual-modal biosensor is designed to modulate the interfacial carrier migration of the zeolitic imidazolate framework (ZIF)-based heterojunction by exploiting stem-loop DNA and the CRISPR/Cas12a system. Specifically, ZIF-hemin (ZIF-Hemin) is assembled at the CdSe/NH 2 -rGO interface via stem-loop DNA to form a ZIF-based heterojunction. Stem-loop DNA with a reinforcing rib effect enhances binding and accelerates the interfacial carrier migration of the heterojunction. In the presence of the target Cry1Ab, the CRISPR/Cas12a system is activated to shear the ZIF-based heterojunction, resulting in the disintegration of the heterojunction and the disappearance of interfacial carrier migration. At this point, ZIF-Hemin is released from the CdSe/NH 2 -rGO interface, with the photocurrent switching from the anode to the cathode. Meanwhile, due to its rich accessible active sites, the released ZIF-Hemin nanosheet shows high peroxidase-like catalytic activity and generates colorimetric signals. The dual-modal biosensor demonstrates excellent performance in selectivity and sensitivity, with low detection limits of 0.05 pg mL -1 (PEC) and 0.4 pg mL -1 (colorimetric). This work provides a general strategy to improve the performance of optical biosensors by modulating the migration of interfacial carriers in heterojunctions.

Enamel adhesion is acknowledged as durable; however, achieving long-lasting dentin adhesion remains a formidable challenge due to degradation of exposed collagen matrix after acid-etching of dentin. The idea of developing an enamel-like adhesion interface holds great promise in achieving enduring dentin adhesion. In this study, we constructed an enamel-like adhesion interface using a rapid remineralization strategy comprising an acidic primer and a rapid remineralization medium. Specifically, the acidic primer of 10-methacryloyloxydecyl dihydrogen phosphate (MDP) and epigallocatechin-3-gallate (EGCG) nanocomplex (MDP@EGCG primer) was utilized to partially demineralize dentin within 30 s, and the MDP@EGCG nanocomplex showed a strong interaction with exposed collagen, enhancing collagen remineralization properties. Then, the rapid remineralization medium containing polyaspartate (Pasp) stabilized amorphous calcium and phosphorus nanoclusters (rapid Pasp-CaP) was applied to modified dentin collagen for 1 min, which caused rapid collagen remineralization within a clinically acceptable time frame. This strategy successfully generated an inorganic rough and porous adhesive interface resembling etched enamel, fundamentally addressed issues of collagen exposure, and achieved durable dentin adhesion in vitro and in vivo while also ensuring user-friendliness. It exhibited potential in prolonging the lifespan of adhesive restorations in clinical settings. In addition, it holds significant promise in the fields of caries and dentin sensitivity treatment and collagen-based tissue engineering scaffolds.

High levels of antibiotic accumulation and the difficulty of degradation can have serious consequences for the environment and, therefore, require urgent attention. To solve this problem, a synergistic Er and Cd ion-codoped Bi 4 O 5 Br 2 photocatalyst was proposed. The degradation rate of sulfamethoxazole (SMX) by Er/Cd-Bi 4 O 5 Br 2 was eight times higher than that of pure Bi 4 O 5 Br 2 , exceeding that of single Er-doped or Cd-doped Bi 4 O 5 Br 2 , which was attributed to the ability of Er/Cd-Bi 4 O 5 Br 2 to generate a variety of free radicals. Experimental results and theoretical calculations suggested a possible mechanism for the improved photocatalytic degradation rate. The reduction of the band gap can facilitate the production of electron-hole pairs, which play a significant role in the production of reactive radicals. Furthermore, an optimal stabilized structure of the ErCd-Bi 4 O 5 Br 2 dopant system was identified based on the formation energy formulas of different ligand configurations. These findings offer promising potential for the degradation of broad-spectrum antibiotics and provide valuable insights for the design and modification of photocatalytic materials.

The electrochemical detection of biosensors is largely governed by the changes in physical properties of redox probes, which are susceptible to electrode substrate effects, inhibiting sensor sensitivity. In this work, a light-driven electrochemical biosensor based on a hybrid nanoantenna was developed for the sensitive detection of fumonisin B1 (FB1). The hybrid nanoantenna sensing interface was constructed by coupling CdSe quantum dots (QDs)-DNA nanowire and graphdiyne oxide composites loaded with methylene blue and gold nanorods (GDYO-MB-Au NRs) using a tetrahedral DNA nanostructure, which acted as a light-driven unit and an amplification unit, respectively. The hybrid nanoantenna with light-driven properties facilitated the alteration in the chemical properties of MB at the sensing interface; that is, MB was degraded under light illumination. The stripping of the CdSe QDs-DNA nanowire triggered by the binding of FB1 could degrade the light-driven capability, thereby improving the electrochemical signal through depressing MB degradation. Taking advantage of the photodegradation of MB by the hybrid nanoantenna, the developed biosensor reduced the background signal and increased the detection sensitivity. The developed biosensor exhibited a linear detection range from 0.5 fg mL -1 to 10 pg mL -1 and a detection limit down to 0.45 fg mL -1 . This strategy shows great promise for the fabrication of highly sensitive electrochemical biosensors.

Tissue-engineered heart valve (TEHV) has emerged as a prospective alternative to conventional valve prostheses. The decellularized heart valve (DHV) represents a promising TEHV scaffold that preserves the natural three-dimensional structure and retains essential biological activity. However, the limited mechanical strength, fast degradation, poor hemocompatibility, and lack of endothelialization of DHV restrict its clinical use, which is necessary for ensuring its long-term durability. Herein, we used oxidized chondroitin sulfate (ChS), one of the main components of the extracellular matrix with various biological activities, to cross-link DHV to overcome the above problems. In addition, the ChS-adipic dihydrazide was used to react with residual aldehyde groups, thus preventing potential calcification. The results indicated notable enhancements in mechanical properties and resilience against elastase and collagenase degradation in vitro as well as the ability to withstand extended periods of storage without compromising the structural integrity of valve scaffolds. Additionally, the newly cross-linked valves exhibited favorable hemocompatibility in vitro and in vivo , thereby demonstrating exceptional biocompatibility. Furthermore, the scaffolds exhibited traits of gradual degradation and resistance to calcification through a rat subcutaneous implantation model. In the rat abdominal aorta implantation model, the scaffolds demonstrated favorable endothelialization, commendable patency, and a diminished pro-inflammatory response. As a result, the newly constructed DHV scaffold offers a compelling alternative to traditional valve prostheses, which potentially advances the field of TEHV.

Comprehending the charge transfer mechanism at the semiconductor interfaces is crucial for enhancing the electronic and optical performance of sensing devices. Yet, relying solely on single signal acquisition methods at the interface hinders a comprehensive understanding of the charge transfer under optical excitation. Herein, we present an integrated photoelectrochemical surface-enhanced Raman spectroscopy (PEC-SERS) platform based on quantum dots/metal-organic framework (CdTe/Yb-TCPP) nanocomposites for investigating the charge transfer mechanism under photoexcitation in multiple dimensions. This integrated platform allows simultaneous PEC and SERS measurements with a 532 nm laser. The obtained photocurrent and Raman spectra of the CdTe/Yb-TCPP nanocomposites are simultaneously influenced by variable bias voltages, and the correlation between them enables us to predict the charge transfer pathway. Moreover, we integrate gold nanorods (Au NRs) into the PEC-SERS system by using magnetic separation and DNA biometrics to construct a biosensor for patulin detection. This biosensor demonstrates the voltage-driven ON/OFF switching of PEC and SERS signals, a phenomenon attributed to the plasmon resonance effect of Au NRs at different voltages, thereby influencing charge transfer. The detection of patulin in apples verified the applicability of the biosensor. The study offers an efficient approach to understanding semiconductor-metal interfaces and presents a new avenue for designing high-performance biosensors.

The process of producing cell-cultured meat involves utilizing a significant amount of culture medium, including fetal bovine serum (FBS), which represents a considerable portion of production expense while also raising environmental and safety concerns. This study demonstrated that supplementation with Auxenochlorella pyrenoidosa protein extract (APE) under low-serum conditions substantially increased Carassius auratus muscle (CAM) cell proliferation and heightened the expression of Myf5 compared to the absence of APE. An integrated intracellular metabolomics and proteomics analysis revealed a total of 13 and 67 differentially expressed metabolites and proteins, respectively, after supplementation with APE in the medium containing 5%FBS, modulating specific metabolism and signaling pathways, which explained the application of APE for passage cell culture under low-serum conditions. Further analysis revealed that the bioactive factors in the APE were protein components. Moreover, CAM cells cultured in reconstructed serum-free media containing APE, l-ascorbic acid, insulin, transferrin, selenium, and ethanolamine exhibited significantly accelerated growth in a scale-up culture. These findings suggest a promising alternative to FBS for fish muscle cell culture that can help reduce production costs and environmental impact in the production of cultured meat.

In the pursuit of combating multidrug-resistant bacteria, antimicrobial peptides (AMPs) have emerged as promising agents; however, their application in clinical settings still presents challenges. Specifically, the exploration of crucial structural parameters that influence the antibacterial spectrum of AMPs and the subsequent development of tailored variants with either broad- or narrow-spectrum characteristics to address diverse clinical therapeutic needs has been overlooked. This study focused on investigating the effects of amino acid sites and hydrophobicity on the peptide's antibacterial spectrum through Ala scanning and fixed-point hydrophobic amino acid substitution techniques. The findings revealed that specific amino acid sites played a pivotal role in determining the antibacterial spectrum of AMPs and confirmed that broadening the spectrum could be achieved only by increasing hydrophobicity at certain positions. In conclusion, this research provided a theoretical basis for future precise regulation of an antimicrobial peptide's spectrum by emphasizing the intricate balance between amino acid sites and hydrophobicity.

The introduction of complex biosynthetic pathways into the hosts' chromosomes is gaining attention with the development of synthetic biology. While CRISPR-Cas9 has been widely employed for gene knock-in, the process of multigene insertion remains cumbersome due to laborious and empirical gene cloning procedures. To address this, we devised a standardized iterative genome editing system for Escherichia coli , harnessing the power of CRISPR-Cas9 and MetClo assembly. This comprehensive toolkit comprises two fundamental elements based on the Golden Gate standard for modular assembly of sgRNA or CRISPR arrays and donor DNAs. We achieved a gene insertion efficiency of up to 100%, targeting a single locus. Expression of tracrRNA using a strong promoter enhances multiplex genomic insertion efficiency to 7.3%, compared with 0.76% when a native promoter is used. To demonstrate the robust capabilities of this genome editing toolbox, we successfully integrated 5-10 genes from the coenzyme B 12 biosynthetic pathway ranging from 5.3 to 8 Kb in length into the chromosome of E. coli chassis cells, resulting in 14 antibiotic-free, plasmid-free producers. Following an extensive screening process involving genes from diverse sources, cistronic design modifications, and chromosome repositioning, we obtained a recombinant strain yielding 1.49 mg L -1 coenzyme B 12 , the highest known titer achieved by using E. coli as the producer. Illuminating its user-friendliness, this genome editing system is an exceedingly versatile tool for expediently integrating complex biosynthetic pathway genes into hosts' genomes, thus facilitating pathway optimization for chemical production.

The Janus interface, comprising multiple functional heterointerfaces with contrasting functionalities within a single interface, has recently garnered widespread research interest. Herein, a Janus biosensing interface is obtained via wavelength-resolved laser illumination. Deoxyribonucleic acid bridges the electrochemical probe of methylene blue (MB) and plasmonic gold nanoparticles (AuNPs), achieving a sensitive detection performance. MB shows differential electrochemical signals under front ( I 532front ) and back ( I 650back ) laser illumination at 532 and 650 nm, respectively, owing to the selective wavelength-resolved effect. Thus, the presence of a wavelength-resolved laser enabled the design of a biosensing interface with Janus properties. The change in the distance between MB and AuNPs induced by aflatoxin B1 (AFB1) indicates that a sensitive response of the Janus biosensing interface can be achieved. A ratiometric strategy is introduced to describe the electrochemical signals of the I 532front and I 650back for improved robustness. The obtained linear range is 0.0005-50 ng mL -1 , with a detection limit of 0.175 pg mL -1 . Our study demonstrated that the wavelength-resolved Janus interface enables an electrochemical biosensor with excellent sensitivity. This finding provides an efficient approach for improving biosensor performance.

The intestinal barrier is critical for maintaining intestinal homeostasis, and its dysfunction is associated with various diseases. Recent findings have revealed the multifunctional role of intestinal alkaline phosphatase (IAP) in diverse biological processes, including gut health maintenance and function. This review summarizes the protective effects of IAP on intestinal barrier integrity, encompassing the physical, chemical, microbial, and immune barriers. We discuss the results and insights from in vitro, animal model, and clinical studies as well as the available evidence regarding the impact of diet on IAP activity and expression. IAP can also be used as an indicator to assess intestinal-barrier-related diseases. Further research into the mechanisms of action and long-term health effects of IAP in maintaining overall intestinal health is essential for its future use as a dietary supplement or functional component in medical foods.

Reversible electrochromic supercapacitors (ESCs) have attracted considerable interest as visual display screens. The use of ESCs in combination with a photoelectrochemical (PEC) biosensor promises to improve the detection efficiency. Herein, a visual PEC biosensor is developed by introducing a circuit module between a PEC-sensing platform (PSP) and a reversible ESC for Cry1Ab protein detection. In PSP, a type II MgTi 2 O 5 /CdSe heterojunction effectively drives charge separation by their cross-matched band gap structures, generating an amplified photocurrent. Next, the circuit module is designed to connect the PSP and ESC, realizing the signal conversion from photocurrent to voltage. ESC, as a visual display screen, produces reversible color changes with different voltages. As the concentration of Cry1Ab increases, the photocurrent decreases due to the specific binding between the aptamer and Cry1Ab in PSP, while the color of the reversible ESC changes from green to blue. To improve the integrity of the device, a portable PEC biosensor is further constructed via three-dimensional printing for dual-modal Cry1Ab protein detection, thus collecting both PEC and visual signals. The linear ranges are 0.3-3000 ng mL -1 for PEC mode and 1-1000 ng mL -1 for visual mode. This work presents a portable, efficient, sensitive, and visualized detection system, providing an important reference for practical visualization applications.

Parkinson's disease (PD) is a progressive neurodegenerative disorder causing the loss of dopaminergic neurons in the substantia nigra and the drastic depletion of dopamine (DA) in the striatum; thus, DA can act as a marker for PD diagnosis and therapeutic evaluation. However, detecting DA in the brain is not easy because of its low concentration and difficulty in sampling. In this work, we report the fabrication of a covalent organic framework (COF)-modified carbon fiber microelectrode (cCFE) that enables the real-time detection of DA in the mouse brain thanks to the outstanding antibiofouling and antichemical fouling ability, excellent analytical selectivity, and sensitivity offered by the COF modification. In particular, the COF can inhibit the polymerization of DA on the electrode (namely, chemical fouling) by spatially confining the molecular conformation and electrochemical oxidation of DA. The cCFE can stably and continuously work in the mouse brain to detect DA and monitor the variation of its concentration. Furthermore, it was combined with levodopa administration to devise a closed-loop feedback mode for PD diagnosis and therapy, in which the cCFE real-time monitors the concentration of DA in the PD model mouse brain to instruct the dose and injection time of levodopa, allowing a customized medication to improve therapeutic efficacy and meanwhile avoid adverse side effects. This work demonstrates the fascinating properties of a COF in fabricating electrochemical sensors for in vivo bioanalysis. We believe that the COF with structural tunability and diversity will offer enormous promise for selective detection of neurotransmitters in the brain.

Aflatoxin B1 (AFB1) contamination has received considerable attention for the serious harm it causes and its wide distribution. Hence, its efficient monitoring is of great importance. Herein, a space-confined electrochemical aptasensor for AFB1 detection is developed using a conductive hydrogel. Plasmonic gold nanoparticles (AuNPs) and methylene blue-embedded double-stranded DNA (MB-dsDNA) were integrated into the conductive Au-hydrogel by ultraviolet (UV) polymerization. Specific recognition of AFB1 by the aptamer released MB from MB-dsDNA in the matrix. The free DNA migrated to the outer layer due to electrostatic repulsion during the Au-hydrogel formation. The electrochemical aptasensor based on this Au-hydrogel offered a twofold enlarged oxidation current of MB ( I MB ) compared with that recorded in the homogeneous solution for AFB1 detection. Upon light illumination, this I MB was further enlarged by the local surface plasmon resonance (LSPR) of the AuNPs. Ultimately, the Au-hydrogel-based electrochemical aptasensor provided a detection limit of 0.0008 ng mL -1 and a linear range of 0.001-1000 ng mL -1 under illumination for AFB1 detection. The Au-hydrogel allowed for space-confined aptasensing, favorable conductivity, and LSPR enhancement for better sensitivity. It significantly enhanced the applicability of the electrochemical aptasensor by avoiding complicated electrode fabrication and signal loss in a bulk homogeneous solution.

Ability to stimulate antimicrobial immunity has proven to be a useful therapeutic strategy in treating infections, especially in the face of increasing antibiotic resistance. Natural antimicrobial peptides (AMPs) exhibiting immunomodulatory functions normally encompass complex activities, which make it difficult to optimize their therapeutic benefits. Here, a chemotactic motif was harnessed as a template to design a series of AMPs with immunostimulatory activities plus bacteria-killing activities ("AMP plus"). An amphipathic peptide (( Ph HA hP H) n ) was employed to improve the antimicrobial impact and expand the therapeutic potential of the chemotactic motif that lacked obvious bacteria-killing properties. A total of 18 peptides were designed and evaluated for their structure-activity relationships. Among the designed, KWH 2 (1) potently killed bacteria and exhibited a narrow antimicrobial spectrum against Gram-negative bacteria and (2) activated macrophages (i.e., inducing Ca 2+ influx, cell migration, and reactive oxygen species production) as a macrophage chemoattractant. Membrane permeabilization is the major antimicrobial mechanism of KWH 2 . Furthermore, the mouse subcutaneous abscess model supported the dual immunomodulatory and antimicrobial potential of KWH 2 in vivo. The above results confirmed the efficiency of KWH 2 in treating bacterial infection and provided a viable approach to develop immunomodulatory antimicrobial materials with desired properties.

Cells penetrating molecules in living systems hold promise of capturing and eliminating threats and damage that can plan intracellular fate promptly. However, it remains challenging to construct cell penetration systems that are physiologically stable with predictable self-assembly behavior and well-defined mechanisms. In this study, we develop a core-shell nanoparticle using a hyaluronic acid (HA)-coated protein transduction domain (PTD) derived from the human immunodeficiency virus (HIV). This nanoparticle can encapsulate pathogens, transporting the PTD into macrophages via lipid rafts. PTD forms hydrogen bonds with the components of the membrane through TAT, which has a high density of positive charges and reduces the degree of membrane order through Tryptophan (Trp)-zipper binding to the acyl tails of phospholipid molecules. HA-encapsulated PTD increases the resistance to trypsin and proteinase K, thereby penetrating macrophages and eliminating intracellular infections. Interestingly, the nonagglutination mechanism of PTD against pathogens ensures the safe operation of the cellular system. Importantly, PTD can activate the critical pathway of antiferroptosis in macrophages against pathogen infection. The nanoparticles developed in this study demonstrate safety and efficacy against Gram-negative and Gram-positive pathogens in three animal models. Overall, this work highlights the effectiveness of the PTD nanoparticle in encapsulating pathogens and provides a paradigm for transduction systems-anti-intracellular infection therapy.

A tert -butyl hydroperoxide-promoted oxidative annulation reaction of isatins with 2-(trimethylsilyl)aryl triflates for the convenient synthesis of acridone derivatives has been established. Mechanistic investigation suggested that the reaction may proceed via consecutive Baeyer-Villiger-type rearrangement followed by an intermolecular cyclization. This synthetic approach offers several advantages, including broad substrate scope, good functional group tolerance, and simplicity of operation. Additionally, successful late-stage modification of the obtained compounds was achieved, expanding the application potential of this methodology in organic synthesis.

Host defense peptides (HDPs) are primary components of the innate immune system with diverse biological functions, such as antibacterial ability and immunomodulatory function. HDPs are produced and released by immune and epithelial cells against microbial invasion, which are widely distributed in humans, animals, plants, and microbes. Notably, there are great differences in endogenous HDP distribution and expression in humans and animals. Moreover, HDP expression could be regulated by exogenous substances, such as nutrients, and different physiological statuses in health and disease. In this review, we systematically assessed the regulation of expression and mechanism of endogenous HDPs from nutrition and disease perspectives, providing a basis to identify the specificity and regularity of HDP expression. Furthermore, the regulation mechanism of HDP expression was summarized systematically, and the differences in the regulation between nutrients and diseases were explored. From this review, we provide novel ideas targeted the immune regulation of HDPs for protecting host health in nutrition and practical and effective new ideas using the immune regulation theory for further research on protecting host health from pathogenic infection and excessive immunity diseases under the global challenge of the antibiotic-abuse-induced series of problems, including food security and microbial resistance.

A robust solid electrolyte interface (SEI) is crucial to widen the electrochemical stability window of the electrolyte and enable sustainably stable electrode reactions in aqueous Zn ion batteries. Different from the SEI in nonaqueous electrolytes, it is of great importance to form a functional and stable SEI due to parasitic reactions with water in aqueous Zn ion batteries. However, the concrete SEI formation in aqueous electrolytes has been elusive so far. Here, we regulate and unravel the decomposition mechanisms of organic Zn salts at the Zn anode-electrolyte interface in the widely studied zinc triflate-based aqueous electrolytes. By introducing a buffering adsorption layer with an optimal concentration of acetate anions, the uncontrollable decomposition of organic zinc triflate salt is greatly inhibited on Zn anodes, resulting in a stable interface. The average Coulombic efficiency of the Zn anode thus can reach as high as 99.95% and stable cycling for 4200 h. With the cooperation of buffering adsorption layers, the tetraethyl ammonium trifluoromethanesulfonate additive as the decomposition promoter could further regulate the decomposition of triflate anions for the formation of robust SEI layers for Zn anodes in electrolytes with a dilute salt concentration. Zn-polyaniline (PANI) full cells demonstrate stable cycling with controlled N/P ratios in such electrolytes. This work proposes an insightful perspective on rational regulation of the decomposition pathway of electrolyte components by forming a stable electrode-electrolyte interface for improved electrochemical performance of aqueous Zn ion batteries.

Uniform and compact Zn deposition-dissolution is essential to achieve high Coulombic efficiency and long lifespan for Zn anodes. More attention has been commonly focused on the suppression of macroscopic Zn dendrites in the previous reports. The rational control of the microstructure of Zn deposition to prevent the intrinsic volume expansion and pulverization of Zn metal so as to stabilize Zn anodes is less discussed. Herein, we construct a three-dimensional topological Zn deposition at the nanoscale through an in situ electrochemical process in the optimal hybrid aqueous electrolyte. The topological electrode structure can efficiently accommodate microscopic strain and volume variation and thus largely preserve the macroscopic integrity and electrical contact of Zn anodes, leading to enhanced reversibility and stability. With the unique topological structure of Zn deposition, the Coulombic efficiency of Zn anodes could reach >99.9% with excellent cycling over 1182 h at 2 mA cm -2 and 2 mA h cm -2 (Zn utilization: 11.4%). The evolution of "dead" Zn during repeated cycling is first investigated using a homemade semiquantitative analysis method to determine the critical "short slab" for aqueous Zn batteries under the practical application. This work provides an insightful method to regulate the microscopic morphology of Zn deposition for high-performance Zn batteries.

Controllable modulation of a response mode is extremely attracting to fabricate biosensor with programmable analytical performances. Here, we reported a proof-of-concept ratiometric photoelectrochemical (PEC) immunoassay of Cry1Ab protein based on the signal transduction regulation at the sensing interface. A sandwich-type PEC structure was designed so that gold nanorods sensitized quantum dots to fix primary antibody (Au NRs/QDs-Ab 1 ) and methylene blue sensitized QDs to combine a second antibody (MB/QDs-Ab 2 ), which served as photoelectric substrate and signal amplifier, respectively. Unlike common recognition element, such a sandwich-type PEC structure allowed for the in situ generation of two specific response signals. For analysis, Cry1Ab captured by Au NRs/QDs-Ab 1 led to a decreased photocurrent ( I Cry1Ab ), while the subsequently anchored MB/QDs-Ab 2 produced another photocurrent ( I MB ). Noteworthy, by taking advantage of the different energy band gaps of QDs, varying locations of CdTe and CdSe QDs could realize different signal transduction strategies (i.e., Mode 1 and Mode 2). Investigations on data analysis of I Cry1Ab and I MB via different routes demonstrated the superior analytical performances of ratiometry (Mode 1). Consequently, the ratiometric PEC immunosensor offered a linear range of 0.01-100 ng mL -1 with a detection limit of 1.4 pg mL -1 . This work provides an efficient strategy for in situ collection of multiple photocurrents to design ratiometric PEC sensors.

Given the substantial π-electron delocalization observed in 4- N,N -dimethylamino-4 ' - N' -methyl-stilbazolium tosylate (DAST), a high third-order nonlinear optical response can be expected that might manifest itself in various ways for potential applications. To probe the possibility and assess its potential, all-organic DAST-polymethyl methacrylate (PMMA) composite films were prepared by a simple solution casting method, and their nonlinear absorption performances were measured by an open-aperture Z-scan system. The results reveal that under irradiation by a 380 fs laser pulse at 520 nm or a 6 ns laser pulse at 532 nm, the DAST-PMMA composite films with a DAST concentration of 0.125 wt % exhibit similar giant optical limiting (OL) responses with OL threshold of 7.84 or 0.37 GW cm -2 , both superior to those of most organic and inorganic OL materials measured under similar conditions. These all-organic composite films show high flexibility, and interestingly, their OL responses can remain stable even after exposure to air for 3 months. The superior OL behaviors of such materials in the femtosecond and nanosecond regimes are attributed to the two-photon absorption and the combination of two-photon absorption and excited-state absorption, respectively. The simple preparation, high flexibility, giant OL responses, and excellent environmental stability suggest that such novel all-organic composite films hold great potential for applications in flexible OL devices.

This study investigated the effects of oleanolic acid (OA) on hepatic lipid metabolism and gut-liver axis homeostasis in an obesity-related non-alcoholic fatty liver disease (NAFLD) nutritional animal model and explored possible molecular mechanisms behind its effects. The results revealed that OA ameliorated the development of metabolic disorders, insulin resistance, and hepatic steatosis in obese rats. Meanwhile, OA restored high-fat-diet (HFD)-induced intestinal barrier dysfunction and endotoxin-mediated induction of toll-like-receptor-4-related pathways, subsequently inhibiting endotoxemia and systemic inflammation and balancing the homeostasis of the gut-liver axis. OA also reshaped the composition of the gut microbiota of HFD-fed rats by reducing the Firmicutes/Bacteroidetes ratio and increasing the abundance of butyrate-producing bacteria. Our results support the applicability of OA as a treatment for obesity-related NAFLD through its anti-inflammatory, antioxidant, and prebiotic integration responses mediated by the gut-liver axis.

With the increasing volume of cardiovascular surgeries and the rising adoption rate of new methodologies that serve as a bridge to cardiac transplantation and that require multiple surgical interventions, the formation of postoperative intrapericardial adhesions has become a challenging problem that limits future surgical procedures, causes serious complications, and increases medical costs. To prevent this pathology, we developed a nanotechnology-based self-healing drug delivery hydrogel barrier composed of silicate nanodisks and polyethylene glycol with the ability to coat the epicardial surface of the heart without friction and locally deliver dexamethasone, an anti-inflammatory drug. After the fabrication of the hydrogel, mechanical characterization and responses to shear, strain, and recovery were analyzed, confirming its shear-thinning and self-healing properties. This behavior allowed its facile injection (5.75 ± 0.15 to 22.01 ± 0.95 N) and subsequent mechanical recovery. The encapsulation of dexamethasone within the hydrogel system was confirmed by 1 H NMR, and controlled release for 5 days was observed. In vitro , limited cellular adhesion to the hydrogel surface was achieved, and its anti-inflammatory properties were confirmed, as downregulation of ICAM-1 and VCAM-1 was observed in TNF-α activated endothelial cells. In vivo , 1 week after administration of the hydrogel to a rabbit model of intrapericardial injury, superior efficacy was observed when compared to a commercial adhesion barrier, as histological and immunohistochemical examination revealed reduced adhesion formation and minimal immune infiltration of CD3+ lymphocytes and CD68+ macrophages, as well as NF-κβ downregulation. We presented a novel nanostructured drug delivery hydrogel system with unique mechanical and biological properties that act synergistically to prevent cellular infiltration while providing local immunomodulation to protect the intrapericardial space after a surgical intervention.

Uncontrollable electrochemical deposition of Li 2 S has negative impacts on the electrochemical performance of lithium-sulfur batteries, but the relationship between the deposition and the surface defects is rarely reported. Herein, ab initio molecular dynamics (AIMD) and density functional theory (DFT) approaches are used to study the Li 2 S deposition behaviors on pristine and defected graphene substrates, including pyridinic N (PDN) doped and single vacancy (SV), as well as the interfacial characteristics, in that such defects could improve the polarity of the graphene material, which plays a vital role in the cathode. The result shows that due to the constraint of molecular vibration, Li 2 S molecules tend to form stable adsorption with PDN atoms and SV defects, followed by the nucleation of Li 2 S clusters on these sites. Moreover, the clusters are more likely to grow near these sites following a spherical pattern, while a lamellar pattern is favorable on pristine graphene substrates. It is also discovered that PDN atoms and SV defects provide atomic-level pathways for the electronic transfer within the Li 2 S-electrode interface, further improving the electrochemical performance of the Li-S battery. It is found for the first time that surface defects also have strong impacts on the deposition pattern of Li 2 S and provide electronic pathways simultaneously. Our work demonstrated the interior relationship between the surface defects in carbon substrates and the stability of Li 2 S precipitates, which is of high significance to understand the electrochemical kinetics and design Li-S battery with long cycle life.

We present herein rPTMDetermine, an adaptive and fully automated methodology for validation of the identification of rarely occurring post-translational modifications (PTMs), using a semisupervised approach with a linear discriminant analysis (LDA) algorithm. With this strategy, verification is enhanced through similarity scoring of tandem mass spectrometry (MS/MS) comparisons between modified peptides and their unmodified analogues. We applied rPTMDetermine to (1) perform fully automated validation steps for modified peptides identified from an in silico database and (2) retrieve potential yet-to-be-identified modified peptides from raw data (that had been missed through conventional database searches). In part (1), 99 of 125 3-nitrotyrosyl-containing (nitrated) peptides obtained from a ProteinPilot search were validated and localized. Twenty nitrated peptides were falsely assigned because of incorrect monoisotopic peak assignments, leading to erroneous identification of deamidation and nitration. Five additional nitrated peptides were, however, validated after performing nonmonoisotopic peak correction. In part (2), an additional 236 unique nitrated peptides were retrieved and localized, containing 113 previously unreported nitration sites; 25 endogenous nitrated peptides with novel sites were selected and verified by comparison with synthetic analogues. In summary, we identified and confidently validated 296 unique nitrated peptides-collectively representing the largest number of endogenously identified 3-nitrotyrosyl-containing peptides from the cerebral cortex proteome of a Macaca fascicularis model of stroke. Furthermore, we harnessed the rPTMDetermine strategy to complement conventional database searching and enhance the confidence of assigning rarely occurring PTMs, while recovering many missed peptides. In a final demonstration, we successfully extended the application of rPTMDetermine to peptides featuring tryptophan oxidation.

The label-free assay has drawn extensive attention because it does not require a labeling step and enables direct interaction and signal transduction between the sensing unit and target analytes. Herein, we demonstrate a proof-of-principle concept of a label-free and visualized nanoplasmonic strategy for silver ions sensing, where only Ti 3 C 2 MXenes are employed by exploring their excellent adsorption affinity and reductive property toward metal ions. Ag + was adsorbed onto the surface of Ti 3 C 2 MXene nanosheets, followed by the Ti 3 C 2 MXenes mediated in situ silver nanoparticles (Ag NPs) generation without adding any extra stabilizing or reducing agent. The excellent localized surface plasmon resonances at a particular wavelength provide Ag NPs the capability for colorimetric assay with a detection limit of 0.615 μM. With the assistance of a smartphone, RGB analysis exhibited visualized results consistent with the results measured on a UV-vis spectrometer, promising a budget, simple-operating on-site detection. Moreover, the detection of Ag + in real samples was achieved with satisfactory results meeting the analysis demand for the Drinking Water Standards of the World Health Organization (WHO) and the United States Environmental Protection Agency (U.S. EPA). These results reveal that Ti 3 C 2 MXenes possess great potential in building convenient label-free colorimetry nanoplatforms and may evoke more inspirations to explore strategies for the direct sensing of analytes.

The instability and insolubility of perovskite quantum dots in aqueous solution prohibit applications in polar solvents. As a highly toxic gas pollutant and also an endogenous gaseous signaling molecule existing in a variety of physiological processes, hydrogen sulfide (H 2 S), with high selectivity and high specificity, detection is of great significance. In this study, a simple device has been designed to separate H 2 S from aqueous solution and CsPbBr 3 quantum dots (CsPbBr 3 QDs) have been used as the detection probe to develop a novel fluorescent sensor for rapid H 2 S detection. The addition of hydrogen sulfide to the phosphoric acid solution results in the escape of H 2 S from the aqueous sample and hence it passing into the n -hexane solution containing CsPbBr 3 QDs, resulting in the quenching of the fluorescence of CsPbBr 3 QDs. The fluorescence intensity of the system has a linear relationship with the concentration of H 2 S in the range of 0-100 μM with the detection limit of 0.18 μM. The proposed system has been applied to detection of H 2 S in rat brain microdialysate with satisfying results. The potential mechanism regarding the quenching of fluorescence from CsPbBr 3 QDs by H 2 S has been studied as well.

Cooperite, or platinum sulfide (PtS), is a rare mineral that generally exists as microscale, irregularly shaped crystallites. The presence of impurities, in both naturally occurring and synthesized samples, has hindered the study of its optical properties in the past. In this work, we prepare large-scale, uniform PtS films in bulk to two-dimensional form through the thermally assisted conversion method. An abnormal trend is observed in linear spectral studies whereby the optical bandgap narrows as the film thickness decreases. A model based on the continuous distribution of carriers in real space, which can be regarded as a quantum well normal to the plane, is used to describe the thickness-dependent carrier recombination phenomenon. In the nonlinear optical measurements, PtS exhibits ultrafast saturable absorption and self-defocusing properties in the visible region, which are dominated by the resonant electronic nonlinearities.

Advances in cardiovascular materials have brought us improved artificial vessels with larger diameters for reducing adverse responses that drive acute thrombosis and the associated complications. Nonetheless, the challenge is still considerable when applying these materials in small-diameter blood vessels. Here we report the biomimetic design of an acellular small-diameter vascular graft with specifically lamellar nanotopography on the luminal surface via a modified freeze-cast technique. The experimental findings verify that the well-designed nanolamellar structure is able to inhibit the adherence and activation of platelets, induce oriented growth of endothelial cells, and eventually remodel a neovessel to maintain long-term patency in vivo . Furthermore, the results of numerical simulations in physically mimetic conditions reveal that the regularly lamellar nanopattern can manipulate blood flow to reduce the flow disturbance compared with random topography. Our current work not only creates a freeze-cast small-diameter vascular graft that employs topographic architecture to direct the vascular cell fates for revasculature but also rekindles confidence in biophysical cues for modulating in situ tissue regeneration.

Many studies have shown that fluorosis due to long-term fluoride intake has damaging effects on the heart. However, the mechanisms underlying cardiac fluorosis have not been illuminated in detail. We performed high-throughput transcriptome sequencing (RNA-Seq) on rat cardiac tissue to explore the molecular effects of NaF exposure. In total, 372 and 254 differentially expressed genes (DEGs) were identified between a group given 30 mg/L NaF and control and between a group given 90 mg/L NaF and control, respectively. The transcript levels of most of these genes were significantly down-regulated and many were distributed in the Toll-like receptor signaling pathway. Transcriptome analysis revealed that herpes simplex infection, ECM-receptor interaction, influenza A, cytokine-cytokine receptor interaction, apoptosis, and Toll-like receptor signaling pathway were significantly affected. IL-6 and IL-10 may play a crucial role in the cardiac damage caused by NaF as external stimuli according to protein-protein interaction (PPI) network analysis. The results of qRT-PCR and Western blotting showed a marked decreased mRNA and protein levels of IL-1, IL-6, and IL-10 in the low concentration fluoride (LF) and high concentration fluoride (HF) groups, which was in agreement with RNA-Seq results. This is the first study to investigate NaF-induced cardiotoxicity at a transcriptome level.

Perovskite ferroelectrics with prominent nonlinear optical absorption have attracted great attention in the field of photonics. However, they are traditionally dominated by inorganic oxides and exhibit relatively small nonlinear optical absorption coefficients, which hinder their further applications. Herein, we report a new organic-inorganic hybrid bilayered perovskite ferroelectric, (C 4 H 9 NH 3 ) 2 (NH 2 CHNH 2 )Pb 2 Br 7 (1), showing an above-room-temperature Curie temperature (∼322 K) and notable spontaneous polarization (∼3.8 μC cm -2 ). Significantly, the unique quantum-well structure of 1 results in intriguing two-photon absorption properties with a giant nonlinear optical absorption coefficient as high as 5.76 × 10 3 cm GW -1 , which is almost two-orders of magnitude larger than those of mostly traditional all-inorganic perovskite ferroelectrics. To our best knowledge, 1 is the first example of hybrid ferroelectrics with giant two-photon absorption coefficient. The mechanisms for ferroelectric and two-photon absorption are revealed. This work will shed light on the design of new ferroelectrics with two-photon absorption and promote their potentials in the photonic application.

We present a simple, direct method to prepare monohydroxylated cucurbit[7]uril (CB7-OH) through the direct oxidation of its precursor host, cucurbit[7]uril (CB7). Although the conversion takes place in low yield (14%), the isolation of CB7-OH from the reaction mixture is straightforward, and the unreacted CB7 can be easily recovered. ITC measurements with several selected guests confirmed that CB7-OH binds all of them in aqueous solution with similar, albeit slightly lower, binding affinities than those observed with the unmodified CB7 host. ESI mass spectrometric competition experiments are consistent with the ITC measurements. A variety of spectroscopic and voltammetric measurements also verify that the CB7-OH complexes exhibit properties essentially identical to those of the CB7 complexes. DFT computational data also confirm the similar thermodynamic stabilities and structures of the CB7-OH and CB7 inclusion complexes. Finally, the high thermodynamic stability of the CB7-OH complexes was used to improve on the extraction efficiency of stir bar sorptive extraction methods after suitable modification of the active coating with CB7-OH.

High-quality CH 3 NH 3 PbI 3-x Cl x films have attracted research interests in photoelectric devices because of their improved carrier diffusion length and charge mobility. Herein, a solvent-assisted thermal-pressure strategy is developed to promote the secondary growth of perovskite grains in the films. Highly oriented perovskite films are then obtained with large-sized grains (5-10 μm). As a consequence, the photodetectors based on the high-quality CH 3 NH 3 PbI 3- x Cl x films exhibit enhanced ophtoelectrical performance, including high on/off ratio (>2.1 × 10 4 ), fast response time (54/63 μs), and high detectivity (∼1.3 × 10 12 ). This work suggests an effective approach for high-quality perovskite films, which will be promising candidates for other high-efficiency photoelectric devices.

High-quality organic-inorganic hybrid perovskite films are crucial for excellent performance of photoelectric devices. Herein, we demonstrate a pressure-assisted space-confined solvent-engineering strategy to grow highly oriented, pinhole-free thin films of CH 3 NH 3 PbI 3 with large-scale crystalline grains, high smoothness, and crystalline fusion on grain boundaries. These single-crystalline grains vertically span the entire film thickness. Such a film feature dramatically reduces recombination loss and then improves the transport property of charge carriers in the films. Consequently, the photodetector devices, based on the high-quality CH 3 NH 3 PbI 3 films, exhibit high photocurrent (105 μA under 671 nm laser with a power density of 20.6 mW/cm 2 at 10 V), good stability, and, especially, an ultrahigh on/off ratio (I light /I dark > 2.2 × 10 4 under an incident light of 20.6 mW/cm 2 ). These excellent performances indicate that the high-quality films will be potential candidates in other CH 3 NH 3 PbI 3 -based photoelectric devices.

Development of novel antiviral reagents is of great importance for the control of virus spread. Here, Ag 2 S nanoclusters (NCs) were proved for the first time to possess highly efficient antiviral activity by using porcine epidemic diarrhea virus (PEDV) as a model of coronavirus. Analyses of virus titers showed that Ag 2 S NCs significantly suppressed the infection of PEDV by about 3 orders of magnitude at the noncytotoxic concentration at 12 h postinfection, which was further confirmed by the expression of viral proteins. Mechanism investigations indicated that Ag 2 S NCs treatment inhibits the synthesis of viral negative-strand RNA and viral budding. Ag 2 S NCs treatment was also found to positively regulate the generation of IFN-stimulating genes (ISGs) and the expression of proinflammation cytokines, which might prevent PEDV infection. This study suggest the novel underlying of Ag 2 S NCs as a promising therapeutic drug for coronavirus.

We report on the enhancement and modulation of nonlinear optical response in an Nd:Y 3 Al 5 O 12 (Nd:YAG) laser crystal through embedded silver nanoparticles (NPs) fabricated by Ag + ion implantation. The linear absorption spectrum of the sample clearly reveals a localized surface plasmon resonance (SPR) band from 350 to 700 nm correlated to the Ag NPs. By using the Z-scan technique with femtosecond pulses at a wavelength of 515 nm, which is considered as an optical excitation within the SPR band, the nonlinear refraction index reaches values as high as ∼10 -12 cm 2 /W, enhanced by ∼4 orders of magnitude in comparison to that of unimplanted Nd:YAG (without Ag NPs). In addition, it has been shown that embedded Ag NPs in the Nd:YAG host reveal saturable absorption signifying the nonlinear responses. We have also observed that the nonlinear absorption coefficients depend significantly on the excitation energy and can be modulated by varying the fluence of Ag + ions., Competing Interests: The authors declare no competing financial interest.

Coiled-coil, a basic folding pattern of native proteins, was previously demonstrated to be associated with the specific spatial recognition, association, and dissociation of proteins and can be used to perfect engineering peptide model. Thus, in this study, a series of amphiphiles composed of heptads repeats with coiled-coil structures was constructed, and the designed peptides exhibited a broad spectrum of antimicrobial activities. Circular dichroism and biological assays showed that the heptad repeats and length of the linker between the heptads largely influenced the amphiphile's helical propensity and cell selectivity. The engineered amphiphiles were also found to efficiently reduce sessile P. aeruginosa biofilm biomass, neutralize endotoxins, inhibit the inflammatory response, and remain active under physiological salt concentrations. In summary, these findings are helpful for short AMP design with a highly therapeutic index to treat bacteria-induced infection.

Acute lung injury (ALI) and idiopathic pulmonary fibrosis (IPF) are both serious public health problems with high incidence and mortality rate in adults, and with few drugs available for the efficient treatment in clinic. In this study, we identified that two known histone deacetylase (HDAC) inhibitors, suberanilohydroxamic acid (SAHA, 1) and its analogue 4-(dimethylamino)-N-[7-(hydroxyamino)-7-oxoheptyl]benzamide (2), are effective inhibitors of Leukotriene A4 hydrolase (LTA4H), a key enzyme in the biosynthesis of leukotriene B4 (LTB4), across a panel of 18 HDAC inhibitors, using enzymatic assay, thermofluor assay, and X-ray crystallographic investigation. Importantly, both 1 and 2 markedly diminish early neutrophilic inflammation in mouse models of ALI and IPF under a clinical safety dose. Detailed mechanisms of down-regulation of proinflammatory cytokines by 1 or 2 were determined in vivo. Collectively, 1 and 2 would provide promising agents with well-known clinical safety for potential treatment in patients with ALI and IPF via pharmacologically inhibiting LAT4H and blocking LTB4 biosynthesis.

The combination of photodynamic therapy (PDT) and chemotherapy holds great potential in combating drug-resistant cancers. However, the major challenge that lies ahead is how to achieve high coloading capacity for both photosensitizer and chemo-drugs and how to gain efficient delivery of drugs to the drug-resistant tumors. In this study, we prepared a nanovehicle for codelivery of photosensitizer (pyropheophorbide-a, PPa) and chemo-drugs (paclitaxel, PTX) based on the synthesis of PPa-conjugated amphiphilic copolymer PPa-PLA-PEG-PLA-PPa. The obtained nanoparticles (PP NP) exhibited a satisfactory high drug-loading capacity for both drugs. To achieve effective tumor-targeting therapy, the surface of PP NP was decorated with a tumor-homing and penetrating peptide F3. In vitro cellular experiments showed that F3-functionalized PP NP (F3-PP NP) exhibited higher cellular association than PP NP and resulted in the strongest antiproliferation effect. In addition, compared with the unmodified nanoparticles, F3-PP NP exhibited a more preferential enrichment at the tumor site. Pharmacodynamics evaluation in vivo demonstrated that a longer survival time was achieved by the tumor-bearing mice treated with PP NP (+laser) than those treated with chemotherapy only or PDT only. Such antitumor efficacy of combination therapy was further improved following the F3 peptide functionalization. Collectively, these results suggested that targeted combination therapy may pave a promising way for the therapy of drug-resistant tumor.

The optical nonlinearity of WS2 and MoS2 monolayer and few-layer films was investigated using the Z-scan technique with femtosecond pulses from the visible to the near-infrared range. The nonlinear absorption of few- and multilayer WS2 and MoS2 films and their dependences on excitation wavelength were studied. WS2 films with 1-3 layers exhibited a giant two-photon absorption (TPA) coefficient as high as (1.0 ± 0.8) × 10(4) cm/GW. TPA saturation was observed for the WS2 film with 1-3 layers and for the MoS2 film with 25-27 layers. The giant nonlinearity of WS2 and MoS2 films is attributed to a two-dimensional confinement, a giant exciton effect, and the band edge resonance of TPA.

N-Acyloxymethyl derivatives of pioglitazone (PIO) have been prepared and characterized as model candidates for extended-release injectable formulations. All PIO derivatives prepared are crystalline solids as determined by powder X-ray diffraction, and the solubility in aqueous media is below 1 μM at 37 °C. The melting points steadily increase from 55 °C, for the hexanoyloxymethyl derivative, to 85 °C, for the palmitoyloxymethyl derivative; inversely, the solubilities in ethyl oleate decrease as a function of increasing acyl chain length. The butyroyloxymethyl ester has a higher melting point and a lower solubility in ethyl oleate than expected from the trend. The (13)C solid-state NMR spectra of the PIO homologues between the hexanoyloxymethyl derivative and stearoyloxymethyl derivative suggest a common structural motif with the acyl chains exchanging between two distinct conformations, and the rate of exchange is slower for longer chain derivatives. The butyroyloxymethyl derivative is efficiently converted to PIO in in vitro rat plasma with a half-life of <2 min at 37 (o) C, while the rate of enzymatic cleavage in rat plasma decreases as the ester chain length increases for the longer acyloxymethyl derivatives. The concentration of PIO in plasma increases rapidly, or "spikes," in the hours following intramuscular (IM) injection of either the HCl salt or the butyroyloxymethyl derivative. In contrast, the more lipophilic palmitoyloxymethyl derivative provides slow growth in the PIO concentration over the first day to reach levels that remain steady for 2 weeks. On the basis of its in vivo pharmacokinetic profile, as well as material and solubility properties, the PIO palmitoyloxymethyl derivative has potential as a once-monthly injectable medication to treat diabetes.

Directed assembly of nanomaterials is a promising route for the synthesis of nanoscale materials. In this paper, we demonstrate the directed-assembly of highly ordered two-dimensional arrays of hierarchical nanostructures with tunable size, spacing and composition. The directed assembly is achieved on lithographically patterned metal films that are subsequently pulse-laser melted; during the brief liquid lifetime, the pattened nanostructures assemble into highly ordered primary and secondary nanoparticles, with sizes below that which was originally patterned. Complementary fluid-dynamics simulations emulate the resultant patterns and show how the competition of capillary forces and liquid metal-solid substrate interaction potential drives the directed assembly. As an example of the enhanced functionality, a full-wave electromagnetic analysis has been performed to identify the nature of the supported plasmonic resonances.

Q[8]-based porous materials were synthesized in the presence of [Md-blockCl4](2-) anions as structure inducers. The driving forces of the structure-directing effect of the [Md-blockCl4](2-) anions may be due to the ion-dipole interaction and hydrogen bonding between the [Md-blockCl4](2-) anions and ≡CH or ═CH2 groups on the backs of Q[8] molecules. Moreover, the tests of potential applications show that these porous materials can not only capture organic molecules through the cavity of Q[8] moieties but also adsorb larger organic molecules with different selectivities.

A highly enantioselective Michael-aldol tandem reaction with respect to prochiral 2-substituted benzofuran-3-ones and enones by a facile primary amine catalyst was investigated. The approach provides rapid access to the desired pharmaceutically active griseofulvin analogues.