Search

Assembling two-dimensional van der Waals (vdW)-layered materials into heterostructures is an exciting development that sparked the discovery of rich correlated electronic phenomena. vdW heterostructures also offer possibilities for designer device applications in areas such as optoelectronics, valley- and spintronics, and quantum technology. However, realizing the full potential of these heterostructures requires interfaces with exceptionally low disorder which is challenging to engineer. Here, we show that thermal scanning probes can be used to create pristine interfaces in vdW heterostructures. Our approach is compatible at both the material- and device levels, and monolayer WS 2 transistors show up to an order of magnitude improvement in electrical performance from this technique. We also demonstrate vdW heterostructures with low interface disorder enabling the electrical formation and control of quantum dots that can be tuned from macroscopic current flow to the single-electron tunneling regime.

We present here the distal-C-H activation/functionalization of biphenyl scaffolds using aliphatic nitrile templates. The approach has demonstrated good to exclusive meta selectivities over a wide range of olefination and acetoxylation substrates. In addition, bis-olefination has been accomplished in a one-pot, sequential manner. Notably, this technique highlights the diversification of pharmaceuticals and natural products. Consequently, the temporary directing aliphatic template has been recovered quantitively from the coupled product.

Despite over a decade of intense research efforts, the full potential of two-dimensional transition-metal dichalcogenides continues to be limited by major challenges. The lack of compatible and scalable dielectric materials and integration techniques restrict device performances and their commercial applications. Conventional dielectric integration techniques for bulk semiconductors are difficult to adapt for atomically thin two-dimensional materials. This review provides a brief introduction into various common and emerging dielectric synthesis and integration techniques and discusses their applicability for 2D transition metal dichalcogenides. Dielectric integration for various applications is reviewed in subsequent sections including nanoelectronics, optoelectronics, flexible electronics, valleytronics, biosensing, quantum information processing, and quantum sensing. For each application, we introduce basic device working principles, discuss the specific dielectric requirements, review current progress, present key challenges, and offer insights into future prospects and opportunities.

Two-dimensional (2D) semiconductors are promising channel materials for continued downscaling of complementary metal-oxide-semiconductor (CMOS) logic circuits. However, their full potential continues to be limited by a lack of scalable high- k dielectrics that can achieve atomically smooth interfaces, small equivalent oxide thicknesses (EOTs), excellent gate control, and low leakage currents. Here, large-area liquid-metal-printed ultrathin Ga 2 O 3 dielectrics for 2D electronics and optoelectronics are reported. The atomically smooth Ga 2 O 3 /WS 2 interfaces enabled by the conformal nature of liquid metal printing are directly visualized. Atomic layer deposition compatibility with high- k Ga 2 O 3 /HfO 2 top-gate dielectric stacks on a chemical-vapor-deposition-grown monolayer WS 2 is demonstrated, achieving EOTs of ∼1 nm and subthreshold swings down to 84.9 mV/dec. Gate leakage currents are well within requirements for ultrascaled low-power logic circuits. These results show that liquid-metal-printed oxides can bridge a crucial gap in dielectric integration of 2D materials for next-generation nanoelectronics.

Sodium-dependent glucose cotransporter 2 inhibitors (SGLT2) are recently approved drugs for the treatment of diabetes that regulate blood glucose levels by inhibiting reabsorption of glucose and sodium in the proximal tubules of the kidney. SGLT2 inhibitors have also shown cardiovascular (CV) benefits in diabetic patients. However, the therapeutic efficacy of SGLT2 inhibitors with respect to CV disease needs further investigation. Thus, the aim of the present study was to examine the effects of SGLT2 inhibitors, canagliflozin (CANA) and dapagliflozin (DAPA) in vitro under glucolipotoxic condition by treating cultured cardiomyocytes (H9C2) with high glucose (HG) and high lipid, palmitic acid (PA), to investigate whether inhibition of sodium glucose cotransporter could prevent any harmful effects of glucolipotoxicity in these cells. SGLT1 expression was measured by immunofluorescence staining and quantitative polymerase chain reaction. Oxidative stress and apoptosis were measured by flow cytometry. Hypertrophy was measured by hematoxylin and eosin (H&E) and crystal violet staining. A significant increase in SGLT1 expression was observed in HG- and PA-treated cardiomyocytes. Also, a significant increase in reactive oxygen species generation and apoptosis was observed in HG+PA-treated cultured cardiomyocytes. HG- and PA-treated cardiomyocytes developed significant structural alterations. All these effects of HG and PA were attenuated by CANA and DAPA. In conclusion, our study demonstrates upregulation of SGLT1 induces oxidative stress and apoptosis in cultured cardiomyocytes. Thus, inhibition of SGLT1 may be used as a possible approach for the treatment of CVD in diabetic patients., Competing Interests: The authors declare no competing financial interest., (© 2022 American Chemical Society.)

This article describes the development of a new aliphatic nitrile-template-directed remote meta -selective C-H olefin functionalization reaction of arenes. Remarkably, unlike the previous reports, this process is feasible at room temperature and enabled the formation of products with excellent regioselectivity. The present protocol encompasses a broad spectrum of substituted dihydrocinnamic acids and olefins, producing meta -C-H olefinated products (up to 96% yield). In addition, the efficacy of the present method has been showcased by the synthesis of various drug analogues (e.g., cholesterol, estrone, ibuprofen, and naproxen). Significantly, the robustness of meta -olefination was also demonstrated by gram-scale synthesis. The new nitrile-based meta -directing template, in particular, could be easily synthesized in two steps and recycled under mild conditions.

Herein, we present m -C-H olefination on derivatives of phenylacetic acids by tethering with a simple nitrile-based template through palladium catalysis. Notably, the versatility of the method is evaluated with a wide range of phenylacetic acid derivatives for obtaining the meta -olefination products in fair to excellent yields with outstanding selectivities under mild conditions. Significantly, the present strategy is successfully exemplified for the synthesis of drugs/natural product analogues (naproxen, ibuprofen, paracetamol, and cholesterol).

In nonaqueous Mg batteries, inactive adsorbed species and the passivation layer formed from the reactive Mg with impurities in the electrolyte seriously affect the Mg metal/electrolyte interface. These adlayers can impede the passage of Mg 2+ ions, leading to a high Mg plating/stripping overpotential. Herein, we report the properties of a new additive, bismuth triflate (Bi(OTf) 3 ), for synthesizing a chlorine-free Mg electrolyte to enhance Mg plating/stripping from initial cycles. The beneficial effect of Bi(OTf) 3 can be ascribed to Bi/Mg 3 Bi 2 formed in situ on the Mg metal surface, which increases the charge transfer during the on-off transition by reducing the adsorption of inactive species on the Mg surface and enhancing the resistance of the reactive surface to passivation. This simple method provides a new avenue to improve the compatibility between the Cl-free Mg electrolyte and the Mg metal anode.

Coupled micro- and nanomechanical oscillators are of fundamental and technical interest for emerging quantum technologies. Upon interfacing with long-lived solid-state spins, the coherent manipulation of the quantum hybrid system becomes possible even at ambient conditions. Although the ability of these systems to act as a quantum bus inducing long-range spin-spin interactions has been known, the possibility to coherently couple electron/nuclear spins to the common modes of multiple oscillators and map their mechanical motion to spin-polarization has not been experimentally demonstrated. We here report experiments on interfacing spins to the common modes of a coupled cantilever system and show their correlation by translating ultralow forces induced by radiation from one oscillator to a distant spin. Further, we analyze the coherent spin-spin coupling induced by the common modes and estimate the entanglement generation among distant spins.

Novel photonic microresonators with enhanced nonlinear optical (NLO) intensity are fabricated from polymer particles. As an additional advantage, they offer band gap tunability from the visible to near-infrared regions. A special protocol including (i) copolymerization of 4-(1-pyrenyl)-styrene, styrene, and 1,4-divinylbenzene, (ii) extraction of a dispersible and partly dissolvable, lightly cross-linked polymer network (PN), and (iii) treatment of the blue-emitting PN with electron acceptor (A) molecules such as 1,2,4,5-tetracyanobenzene (TCNB) and 7,7,8,8-tetracyanoquinodimethane (TCNQ) furnishes orange- and red-emitting D-A charge-transfer (CT) complexes with the pendant pyrene units. These complexes, here named PN-TCNB and PN-TCNQ, respectively, precipitate as microparticles upon the addition of water and subsequent ultrasonication. Upon electronic excitation, these spherical microparticles act as whispering-gallery-mode resonators by displaying optical resonances in the photoluminescence (PL) spectra because of light confinement. Further, the trapped incident light increases the light-matter interaction and thereby enhances the PL intensity, including the two-photon luminescence. The described protocol for polymer-based CT microresonators with tunable NLO emissions holds promise for a myriad of photonic applications.

Internal friction in macromolecules is one of the curious phenomena that control conformational changes and reaction rates. It is held here that dispersion interactions and London-van der Waals forces between nonbonded atoms are major contributors to internal friction. To demonstrate this, the flipping motion of aromatic rings of F10 and Y97 amino acid residues of cytochrome c has been studied in glycerol/water mixtures by cross relaxation-suppressed exchange nuclear magnetic resonance spectroscopy. The ring-flip rate is highly overdamped by glycerol, but this is not due to the effect of protein-solvent interactions on the Brownian dynamics of the protein, because glycerol cannot penetrate into the protein to slow the internal collective motions. Sound velocity in the protein under matching solvent conditions shows that glycerol exerts its effect by rather smothering the protein interior to produce reduced molecular compressibility and root-mean-square volume fluctuation (δVRMS), implying an increased number of dispersion interactions of nonbonded atoms. Hence, δVRMS can be used as a proxy for internal friction. By using the ansatz that internal friction is related to nonbonded interactions by the equation f(n) = f0 + f1n + f2n(2) + ..., where the variable n is the extent of nonbonded interactions with fi coefficients, the barrier to aromatic ring rotation is found to be flat. Also interesting is the appearance of a turnover region in the δVRMS dependence of the ring-flip rate, suggesting anomalous internal diffusion. We conclude that cohesive forces among nonbonded atoms are major contributors to the molecular origin of internal friction.

A novel red emitting copolymer (P1) was prepared (Mn ∼ 10.7 kDa) by copolymerizing tridentate ligand, namely 2,6-bis(pyrazolyl)pyridine (BPP) with 4,7-bis(2-ethynyl-5-thienyl)-2,1,3-benzothiadiazole. This copolymer readily formed an orange yellow emitting metal containing conjugated polymer (P1.Tb) with Tb(acac)3. Further, a judicial blend of P1.Tb with polystyrene and its subsequent self-assembly in THF/water produced microspheres with smooth surface area. Interestingly, continuous wave laser excitation of a single microsphere displayed whispering-gallery-mode (WGM) resonance modes over a broad wavelength range covering visible (Vis) and near-infrared (NIR) regions (0.550-0.875 μm). The estimated Q factor was up to 700, which is very high for a metal containing conjugated polymer (MCCP)-based optical gain medium.

Association of water with protein plays a central role in the latter's folding, structure acquisition, ligand binding, catalytic reactivity, oligomerization, and crystallization. Because these phenomena are also influenced by the net charge content on the protein, the present study examines the association of water with cytochrome c held at different pH values so as to allow its side chains to ionize to variable extents. Equilibrium unfolding of differently charged cytochrome c molecules in water-methanol binary mixtures, where the alcohol acts as the cosolvent denaturant, was used to quantify the preferential exclusion of water during the unfolding transition. The extent of exclusion was found to be related to the net-charge-dependent molecular expansion of the protein in an alcohol-free aqueous medium. The degree of water exclusion was also found to be linearly related to the observed rate of protein unfolding, where the net charge contents of the initial and final states are the same. The results suggest that side-chain ionization, molecular expansion due to charge repulsion, and hence the loss of tertiary contacts lead to additional water-protein association. Protein unfolding rates appear to be linearly correlated with the effective number of water molecules excluded across the end states of unfolding equilibria.