Search

Despite the need for molecularly smooth self-assembled monolayers (SAMs) on silicon dioxide surfaces (the most common dielectric surface), current techniques are limited to nonideal silane grafting. Here, we show unique bioinspired zwitterionic molecules forming a molecularly smooth and uniformly thin SAM in "water" in >1 min on various dielectric surfaces, which enables a dip-coating process that is essential for organic electronics to become reality. This monomolecular layer leads to high mobility of organic field-effect transistors (OFETs) based on various organic semiconductors and source/drain electrodes. A combination of experimental and computational techniques confirms strong adsorption (Wad < 20 mJ m-2), uniform thickness (∼0.5 or ∼1 nm) and orientation (all catechol head groups facing the oxide surface) of the "monomolecular" layers. This robust (strong adsorption), rapid, and green SAM represents a promising advancement toward the next generation of nanofabrication compared to the current nonuniform and inconsistent polysiloxane-based SAM involving toxic chemicals, long processing time (<10 h), or heat (<80 °C). [ABSTRACT FROM AUTHOR]

Numerous attempts have been made to translate mussel adhesion to diverse synthetic platforms. However, the translation remains largely limited to the Dopa (3,4-dihydroxyphenylalanine) or catechol functionality, which continues to raise concerns about Dopa's inherent susceptibility to oxidation. Mussels have evolved adaptations to stabilize Dopa against oxidation. For example, in mussel foot protein 3 slow (mfp-3s, one of two electrophoretically distinct interfacial adhesive proteins in mussel plaques), the high proportion of hydrophobic amino acid residues in the flanking sequence around Dopa increases Dopa's oxidation potential. In this study, copolyampholytes, which combine the catechol functionality with amphiphilic and ionic features of mfp-3s, were synthesized and formulated as coacervates for adhesive deposition on surfaces. The ratio of hydrophilic/hydrophobic as well as cationic/anionic units was varied in order to enhance coacervate formation and wet adhesion properties. Aqueous solutions of two of the four mfp-3s-inspired copolymers showed coacervate-like spherical microdroplets (ϕ ≈ 1-5 μm at pH ∼4 (salt concentration ∼15 mM). The mfp-3s-mimetic copolymer was stable to oxidation, formed coacervates that spread evenly over mica, and strongly bonded to mica surfaces (pull-off strength: ∼17.0 mJ/m²). Increasing pH to 7 after coacervate deposition at pH 4 doubled the bonding strength to ∼32.9 mJ/m² without oxidative cross-linking and is about 9 times higher than native mfp-3s cohesion. This study expands the scope of translating mussel adhesion from simple Dopa-functionalization to mimicking the context of the local environment around Dopa. [ABSTRACT FROM AUTHOR]

Mussel foot protein-1 (mfp-1) is an essential constituent of the protective cuticle covering all exposed portions of the byssus (plaque and the thread) that marine mussels use to attach to intertidal rocks. The reversible complexation of Fe3+ by the 3,4-dihydroxyphenylalanine (Dopa) side chains in mfp-1 in Mytilus californianus cuticle is responsible for its high extensibility (120%) as well as its stiffness (2 GPa) due to the formation of sacrificial bonds that help to dissipate energy and avoid accumulation of stresses in the material. We have investigated the interactions between Fe3+ and mfp-1 from two mussel species, M. californianus (Mc) and M. edulis (Me), using both surface sensitive and solution phase techniques. Our results show that although mfp-1 homologues from both species bind Fe3+, mfp-1 (Mc) contains Dopa with two distinct Fe3+-binding tendencies and prefers to form intramolecular complexes with Fe3+. In contrast, mfp-1 (Me) is better adapted to intermolecular Fe3+ binding by Dopa. Addition of Fe3+ did not significantly increase the cohesion energy between the mfp-1 (Mc) films at pH 5.5. However, iron appears to stabilize the cohesive bridging of mfp-1 (Mc) films at the physiologically relevant pH of 7.5, where most other mfps lose their ability to adhere reversibly. Understanding the molecular mechanisms underpinning the capacity of M. californianus cuticle to withstand twice the strain of M. edulis cuticle is important for engineering of tunable strain tolerant composite coatings for biomedical applications. [ABSTRACT FROM AUTHOR]

Geckos are highly efficient climbersand can run over any kindof surface with impeccable dexterity due to the typical design oftheir hierarchical foot structure. We have fabricated tilted, i.e.,asymmetric, poly(dimethylsiloxane) (PDMS) microflaps of two differentdensities that mimic the function of the micrometer sized setae onthe gecko foot pad. The adhesive properties of these microflaps wereinvestigated in a modified surface forces apparatus; both for normalpure loading and unloading (detachment), as well as unloading afterthe surfaces were sheared, both along and against the tilt direction.The tilted microflaps showed directional, i.e., anisotropic adhesivebehavior when sheared against an optically smooth (RMS roughness ≈10 ± 8 nm) SiO2surface. Enhanced adhesion was measuredafter shearing the flaps along the tilted (gripping) direction andlow adhesion when sheared against the tilted (releasing) direction.A Johnson–Kendall–Roberts (JKR) theory using an effectivesurface energy and modulus of rigidity (stiffness) quantitativelydescribed the contact mechanics of the tilted microflaps against theSiO2surface. We also find an increasing adhesion and stick–slipof the surfaces during detachment which we explain qualitatively interms of the density of flaps, considering it to increase from 0%(no flaps, smooth surface) to 100% (close-packed flaps, effectivelysmooth surface). Large energy dissipation at the PDMS–silicainterface caused by the viscoelastic behavior of the polymer resultsin stick–slip peeling and hence an enhanced adhesion energyis observed during the separation of the microflaps surface from thesmooth SiO2surface after shearing of the surfaces. Forstructured multiple contact surfaces, hysteresis as manifested bydifferent loading and unloading paths can be due entirely to the elasticJKR micro-contacts. These results have importantimplications in the design of biomimetic adhesives. [ABSTRACT FROM AUTHOR]

Normal (e.g., adhesion) and lateral(friction) forces were measuredbetween physisorbedand chemicallygrafted layers of hyaluronic acid (HA), an anionic polyelectrolytein the presence of lubricin (Lub), a mucinous glycoprotein, on micasurfaces using a surface forces apparatus (SFA). This work demonstratesthat high friction coefficients between the surfaces do not necessarilycorrelate with surface damage and that chemicallygrafted HA acts synergistically with Lub to provide friction reductionand enhanced wear protection to the surfaces. Surface immobilizationof HA by grafting is necessary for such wear protection. Increasingthe concentration of Lub enhances the threshold load that a chemicallygrafted HA surface can be subjected to before the onset of wear. Additionof Lub does not have any beneficial effect if HA is physisorbedto the mica surfaces. Damage occurs at loads less than 1 mN regardlessof the amount of Lub, indicating that the molecules in the bulk playlittle or no role in protecting the surfaces from damage. Lub penetratesinto the chemicallybound HA to form a visco-elasticgel that reduces the coefficient of friction as well as boosts thestrength of the surface against abrasive wear (damage). [ABSTRACT FROM AUTHOR]

Formation of nitro radical anion (-NO 2 •- ) and other reduction products of 5-nitroimidazoles, although important for antimicrobial activity, makes the drugs neurotoxic. Hence, an appropriate generation and their role in the free radical pathway needs proper realization. This was attempted by studying the action of tinidazole and its Cu II complexes on model targets (nucleic acid bases and calf thymus DNA). Results obtained were correlated with studies on biological species where prevention of biofilm formation on Staphylococcus aureus and Pseudomonas aeruginosa was followed. Tinidazole and its Cu II complexes subjected to electrochemical reduction in aqueous solution, under de-aerated conditions, interact with model nucleic acid bases and calf thymus DNA. These model targets were followed to realize what happens when such compounds undergo enzymatic reduction within cells of microorganisms that they eventually kill. Studies reveal that Cu II complexes were better in modifying nucleic acid bases and calf thymus DNA than tinidazole; damage caused to nucleic acid bases was correlated with that caused to DNA, indicating that compounds affect DNA rich in thymine and adenine. Minimum bactericidal concentrations on sessile S. aureus and P. aeruginosa for the monomeric Cu II complex were 12.5 and 20.25 μM respectively, while those for the dimeric complex were 40.0 and 45.0 μM, respectively. Biofilm formation by P. aeruginosa and S. aureus and viability count of sessile cells were also determined. Cu II complexes of tinidazole brought about substantial reduction in carbohydrate and protein content in S. aureus and P. aeruginosa . Downregulation of quorum sensing signaling mechanism viz. reduced production of pyocyanin and elastase during biofilm formation was also detected. Cu II complexes showed much higher tendency to prevent biofilm formation than tinidazole, almost comparable to amoxicillin, an established drug in this regard., Competing Interests: The authors declare no competing financial interest., (© 2022 The Authors. Published by American Chemical Society.)

A Co(III) complex of 1-amino-4-hydroxy-9,10-anthraquinone (QH) (Scheme-1) having the molecular formula CoQ 3 (Scheme-2) was prepared and characterized by elemental analysis, FTIR spectroscopy, UV-vis spectroscopy, fluorescence spectroscopy, and mass spectrometry. In the absence of a single crystal, the energy-optimized molecular structure of CoQ 3 was determined by employing computational methods that was validated using spectroscopic evidences, elemental analysis, and mass spectrometry data. The electrochemical properties of the complex were analyzed using cyclic voltammetry and indicate a substantial modification of the electrochemical properties of the parent amino-hydroxy-9,10-anthraquinone. CoQ 3 was thereafter tested on MCF-7 human breast cancer cells. The IC 50 value for a 24 h incubation was found to be (95 ± 0.05) μg/mL. The study showed that such cancer cells underwent both early and late apoptosis following the interaction with CoQ 3 ., Competing Interests: The authors declare no competing financial interest., (© 2021 The Authors. Published by American Chemical Society.)

The treatment of malignant cells that are deficient in oxygen due to the insufficient flow of blood is often seen as a major hindrance in radiotherapy. Such cells become radio-resistant because molecular oxygen, the natural and best radio-sensitizer, is depleted. Hence, to compensate this deficiency in oxygen, there is a need for agents that enhance radiation-induced damage of cells (radio-sensitizers) in a manner that normal cells are least affected. Simultaneously, agents capable of showing activity under hypoxic conditions are known as hypoxic cytotoxins that selectively and preferably destroy cells under hypoxic environments. 5-Nitroimidazoles fit both definitions. Their efficiency is based on their ability to generate the nitro radical anion that interacts with the strands of DNA within cells, either damaging or modifying them, leading to cell death. 5-Nitroimidazoles are important radio-pharmaceuticals (radio-sensitizers) in cancer-related treatments where the nitro radical anion has an important role. Since its generation leads to neurotoxic side effects that may be controlled through metal complex formation, this study looks at the possibility of two monomeric complexes of Ornidazole [1-chloro-3-(2-methyl-5-nitro-1 H -imidazole-1-yl)propan-2-ol] with Cu II and Zn II to be better radio-sensitizers and/or hypoxic cytotoxins than Ornidazole. The study reveals that although there is a decrease in nitro radical anion formation by complexes, such a decrease does not hamper their radio-sensitizing ability. Nucleic acid bases (thymine, cytosine, and adenine) or calf thymus DNA used as targets were irradiated with 60 Co γ rays either in the absence or presence of Ornidazole and its monomeric complexes. Radiation-induced damage of nucleic acid bases was followed by high-performance liquid chromatography (HPLC), and modification of calf thymus DNA was followed by ethidium bromide fluorescence. Studies indicate that the complexes were better in performance than Ornidazole. Cu II -ornidazole was significantly better than either Ornidazole or Zn II -ornidazole, which is attributed to certain special features of the Cu II complex; aspects like having a stable lower oxidation state enable it to participate in Fenton reactions that actively influence radio-sensitization and the ability of the complex to bind effectively to DNA., Competing Interests: The authors declare no competing financial interest.

Curcumin is an important molecule with a plethora of pharmacological activities and therapeutic potentials. Despite its efficacy, it remained a potential drug candidate owing to hydrolytic instability and poor aqueous solubility. To overcome the limitations related to low solubility, low bioavailability, and the fact that curcumin is never present in solution as a "single unit", its complex was prepared with Mn II with the idea that binding to a metal ion might help to resolve these issues. The complex was characterized by elemental and spectral analysis. The structure of the complex was determined by density functional theory calculations. The complex was stable at physiological buffer conditions, unlike curcumin. It did not have any detrimental effect on mammalian cells. There was a significant enhancement in the antibacterial activity of the complex compared to curcumin against both Gram-positive ( Staphylococcus aureus ) and Gram-negative ( Escherichia coli ) bacteria. It showed a strong affinity for deoxyribonucleic acid (DNA) evident from a high binding constant value with calf thymus DNA and also from the retarded electrophoretic mobility of bacterial plasmid DNA. The complex showed "superoxide dismutase-like" activity leading to the generation of reactive oxygen species (ROS). The complex caused bacterial membrane perturbation evident from calcein leakage assay, which was further corroborated by scanning and transmission electron microscopic experiments. Overall, the present study shows improved stability and antibacterial potency of a nontoxic complex over curcumin. Its multitargeting mode of action such as ROS-production, effective binding with DNA, and permeabilization of bacterial membrane together allows it to be an effective antibacterial agent that could be taken further for therapeutic use against bacterial infections., Competing Interests: The authors declare no competing financial interest., (Copyright © 2020 American Chemical Society.)

Quinalizarin (THAQ), a hydroxy-9,10-anthraquinone analogue of the family of anthracycline anticancer drugs and an inhibitor of protein kinase, was observed for its anticancer activity. Because apart from showing anticancer activity, anthracyclines and their analogues also show cardiotoxic side effects, believed to be addressed through metal complex formation; an effort was made to realize this by preparing a Co II complex of THAQ. The aim of this study was to find out if complex formation leads to a decrease in the generation of intermediates that are responsible for toxic side effects. However, because this also meant that efficacy on cancer cells would be compromised, studies were undertaken on two cancer cell lines, namely, acute lymphoblastic leukemia (ALL) MOLT-4 and HCT116 cells. The complex decreases the flow of electrons from NADH to molecular oxygen (O 2 ) in the presence of NADH dehydrogenase forming less semiquinone than THAQ. It showed increased affinity toward DNA with binding constant values remaining constant over the physiological pH range unlike THAQ (for which decrease in binding constant values with increase in pH was observed). The complex is probably a human DNA topoisomerase I and human DNA topoisomerase II poison acting by stabilizing the covalent topoisomerase-cleaved DNA adduct, a phenomenon not observed for THAQ. Activity of the compounds on cancer cells suggests that THAQ was more effective on ALL MOLT-4 cells, whereas the complex performed better on HCT116 cells. Results suggest that the formation of semiquinone probably dominates the action because of THAQ, whereas the performance of the complex is attributed to increased DNA binding, inhibition of topoisomerase, and so forth. Inspite of a decrease in the generation of superoxide by the complex, it did not hamper efficacy on either cell line, probably compensated by improved DNA binding and inhibition of topoisomerase enzymes which are positive attributes of complex formation. A decrease in superoxide formation suggests that the complex could be less cardiotoxic, thus increasing its therapeutic index., Competing Interests: The authors declare no competing financial interest.

Wetting of rough surfaces involves time-dependent effects, such as surface deformations, nonuniform filling of surface pores within or outside the contact area, and surface chemistries, but the detailed impact of these phenomena on wetting is not entirely clear. Understanding these effects is crucial for designing coatings for a wide range of applications, such as membrane-based oil-water separation and desalination, waterproof linings/windows for automobiles, aircrafts, and naval vessels, and antibiofouling. Herein, we report on time-dependent contact angles of water droplets on a rough polydimethylsiloxane (PDMS) surface that cannot be completely described by the conventional Cassie-Baxter or Wenzel models or the recently proposed Cassie-impregnated model. Shells of sand dollars (Dendraster excentricus) were used as lithography-free, robust templates to produce rough PDMS surfaces with hierarchical, periodic features ranging from 1 × 10(-7) to 1 × 10(-4) m. Under saturated vapor conditions, we found that in the short term (<1 min), the contact angle of a sessile water droplet on the templated PDMS, θ(SDT) = 140 ± 3°, was accurately described by the Cassie-Baxter model (predicted θ(SDT) = 137°); however, after 90 min, θ(SDT) fell to 110°. Fluorescent confocal microscopy confirmed that the initial reduction in θ(SDT) to 110° (the Wenzel limit) was primarily a Cassie-Baxter to Wenzel transition during which pores within the contact area filled gradually, and more rapidly for ethanol-water mixtures. After 90 min, the contact line of the water droplet became pinned, perhaps caused by viscoelastic deformation of the PDMS around the contact line, and a significant volume of water began to flow from the droplet to pores outside the contact region, causing θ(SDT) to decrease to 65° over 48 h on the rough surface. The system we present here to explore the concept of contact angle time dependence (dynamics) and modeling of natural surfaces provides insights into the design and development of long- and short-lived coatings.

The role of friction in the functional performance of biomaterial interfaces is widely reckoned to be critical and complicated but poorly understood. To better understand friction forces, we investigated the natural adaptation of the holdfast or byssus of mussels that live in high-energy surf habitats. As the outermost covering of the byssus, the cuticle deserves particular attention for its adaptations to frictional wear under shear. In this study, we coacervated one of three variants of a key cuticular component, mussel foot protein 1, mfp-1 [(1) Mytilus californianus mcfp-1, (2) rmfp-1, and (3) rmfp-1-Dopa], with hyaluronic acid (HA) and investigated the wear protection capabilities of these coacervates to surfaces (mica) during shear. Native mcfp-1/HA coacervates had an intermediate coefficient of friction (μ ∼0.3) but conferred excellent wear protection to mica with no damage from applied loads, F ⊥ , as high as 300 mN (pressure, P , > 2 MPa). Recombinant rmfp-1/HA coacervates exhibited a comparable coefficient of friction (μ ∼0.3); however, wear protection was significantly inferior (damage at F ⊥ > 60 mN) compared with that of native protein coacervates. Wear protection of rmfp-1/HA coacervates increased 5-fold upon addition of the surface adhesive group 3,4-dihydroxyphenylalanine, (Dopa). We propose a Dopa-dependent wear protection mechanism to explain the differences in wear protection between coacervates. Our results reveal a significant untapped potential for coacervates in applications that require adhesion, lubrication, and wear protection. These applications include artificial joints, contact lenses, dental sealants, and hair and skin conditioners.

Numerous attempts have been made to translate mussel adhesion to diverse synthetic platforms. However, the translation remains largely limited to the Dopa (3,4-dihydroxyphenylalanine) or catechol functionality, which continues to raise concerns about Dopa's inherent susceptibility to oxidation. Mussels have evolved adaptations to stabilize Dopa against oxidation. For example, in mussel foot protein 3 slow (mfp-3s, one of two electrophoretically distinct interfacial adhesive proteins in mussel plaques), the high proportion of hydrophobic amino acid residues in the flanking sequence around Dopa increases Dopa's oxidation potential. In this study, copolyampholytes, which combine the catechol functionality with amphiphilic and ionic features of mfp-3s, were synthesized and formulated as coacervates for adhesive deposition on surfaces. The ratio of hydrophilic/hydrophobic as well as cationic/anionic units was varied in order to enhance coacervate formation and wet adhesion properties. Aqueous solutions of two of the four mfp-3s-inspired copolymers showed coacervate-like spherical microdroplets (ϕ ≈ 1-5 μm at pH ∼4 (salt concentration ∼15 mM). The mfp-3s-mimetic copolymer was stable to oxidation, formed coacervates that spread evenly over mica, and strongly bonded to mica surfaces (pull-off strength: ∼17.0 mJ/m(2)). Increasing pH to 7 after coacervate deposition at pH 4 doubled the bonding strength to ∼32.9 mJ/m(2) without oxidative cross-linking and is about 9 times higher than native mfp-3s cohesion. This study expands the scope of translating mussel adhesion from simple Dopa-functionalization to mimicking the context of the local environment around Dopa.

We review direct force measurements on a broad class of hydrophobic and hydrophilic surfaces. These measurements have enabled the development of a general interaction potential per unit area, W(D) = -2γ(i)Hy exp(-D/D(H)) in terms of a nondimensional Hydra parameter, Hy, that applies to both hydrophobic and hydrophilic interactions between extended surfaces. This potential allows one to quantitatively account for additional attractions and repulsions not included in the well-known combination of electrostatic double layer and van der Waals theories, the so-called Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The interaction energy is exponentially decaying with decay length D(H) ≈ 0.3-2 nm for both hydrophobic and hydrophilic interactions, with the exact value of D(H) depending on the precise system and conditions. The pre-exponential factor depends on the interfacial tension, γ(i), of the interacting surfaces and Hy. For Hy > 0, the interaction potential describes interactions between partially hydrophobic surfaces, with the maximum hydrophobic interaction (i.e., two fully hydrophobic surfaces) corresponding to Hy = 1. Hydrophobic interactions between hydrophobic monolayer surfaces measured with the surface forces apparatus (SFA) are shown to be well described by the proposed interaction potential. The potential becomes repulsive for Hy < 0, corresponding to partially hydrophilic (hydrated) interfaces. Hydrated surfaces such as mica, silica, and lipid bilayers are discussed and reviewed in the context of the values of Hy appropriate for each system.

We review recent developments in experimental techniques that simultaneously combine measurements of the interaction forces or energies between two extended surfaces immersed in electrolyte solutions-primarily aqueous-with simultaneous monitoring of their (electro)chemical reactions and controlling the electrochemical surface potential of at least one of the surfaces. Combination of these complementary techniques allows for simultaneous real time monitoring of angstrom level changes in surface thickness and roughness, surface-surface interaction energies, and charge and mass transferred via electrochemical reactions, dissolution, and adsorption, and/or charging of electric double layers. These techniques employ the surface forces apparatus (SFA) combined with various "electrochemical attachments" for in situ measurements of various physical and (electro)chemical properties (e.g., cyclic voltammetry), optical imaging, and electric potentials and currents generated naturally during an interaction, as well as when electric fields (potential differences) are applied between the surfaces and/or solution-in some cases allowing for the chemical reaction equation to be unambiguously determined. We discuss how the physical interactions between two different surfaces when brought close to each other (<10 nm) can affect their chemistry, and suggest further extensions of these techniques to biological systems and simultaneous in situ spectroscopic measurements for chemical analysis.

We have synthesized model hydrophobic silicone thin films on gold surfaces by a two-step covalent grafting procedure. An amino-functionalized gold surface reacts with monoepoxy-terminated polydimethylsiloxane (PDMS) via a click reaction, resulting in a covalently attached nanoscale thin film of PDMS, and the click chemistry synthesis route provides great selectivity, reproducibility, and stability in the resulting model hydrophobic silicone thin films. The asymmetric interaction forces between the PDMS thin films and mica surfaces were measured with the surface forces apparatus in aqueous sodium chloride solutions. At an acidic pH of 3, attractive interactions are measured, resulting in instabilities during both approach (jump-in) and separation (jump-out from adhesive contact). Quantitative analysis of the results indicates that the Derjaguin-Landau-Verwey-Overbeek theory alone, i.e., the combination of electrostatic repulsion and van der Waals attraction, cannot fully describe the measured forces and that the additional measured adhesion is likely due to hydrophobic interactions. The surface interactions are highly pH-dependent, and a basic pH of 10 results in fully repulsive interactions at all distances, due to repulsive electrostatic and steric-hydration interactions, indicating that the PDMS is negatively charged at high pH. We describe an interaction potential with a parameter, known as the Hydra parameter, that can account for the extra attraction (low pH) due to hydrophobicity as well as the extra repulsion (high pH) due to hydrophilic (steric-hydration) interactions. The interaction potential is general and provides a quantitative measure of interfacial hydrophobicity/hydrophilicity for any set of interacting surfaces in aqueous solution.

Geckos have developed a unique hierarchical structure to maintain climbing ability on surfaces with different roughness, one of the extremely important parameters that affect the friction and adhesion forces between two surfaces. Although much attention has been paid on fabricating various structures that mimic the hierarchical structure of a gecko foot, yet no systematic effort, in experiment or theory, has been made to quantify the effect of surface roughness on the performance of the fabricated structures that mimic the hierarchical structure of geckos. Using a modified surface forces apparatus (SFA), we measured the adhesion and friction forces between microfabricated tilted PDMS flaps and optically smooth SiO(2) and rough SiO(2) surfaces created by plasma etching. Anisotropic adhesion and friction forces were measured when sliding the top glass surface along (+y) and against (-y) the tilted direction of the flaps. Increasing the surface roughness first increased the adhesion and friction forces measured between the flaps and the rough surface due to topological matching of the two surfaces but then led to a rapid decrease in both of these forces. Our results demonstrate that the surface roughness significantly affects the performance of gecko mimetic adhesives and that different surface textures can either increase or decrease the adhesion and friction forces of the fabricated adhesives.