Search

It is becoming increasingly common to use gold nanoparticles (AuNPs) protected by a heterogeneous mixture of thiolate ligands, but many ligand mixtures on AuNPs cannot be properly characterized due to the inherent limitations of commonly used spectroscopic techniques. Using ion mobility mass spectrometry (IM-MS), we have developed a strategy that allows measurement of the relative quantity of ligands on AuNP surfaces. This strategy is used for the characterization of three samples of mixed-ligand AuNPs: tiopronin:glutathlone (av diameter 2.5 nm), octanethiohdecanethiol (av diameter 3.6 nm), and tiopronin:11-mereaptoundecyl(poly ethylene glycol) (av diameter 2.5 nm). For validation purposes, the results obtained for tiopronin:glutathione AuNPs were compared to parallel measurements using nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry (MS) without ion mobility separation. Relative quantitation measurements for NMR and IM-MS were in excellent agreement, with an average difference of less than 1% relative abundance. IM-MS and MS without ion mobility separation were not comparable, due to a lack of ion signals for MS. The other two mixed-ligand AuNPs provide examples of measurements that cannot be performed using NMR spectroscopy. 10.1021/ac102175z

Matrix-assisted laser desorption/ionization-ion mobilitymass spectrometry (MALDI-IM-MS) was used to analyze low mass gold-thiolate fragments generated from thiolate-protected gold nanoparticles (AuNPs). This is the first report of using gas-phase structural separations by IMMS for the characterization of AuNPs, revealing significant structural variation between organic and gold-thiolate ionic species. Through the separation of background chemical noise, gold-thiolate ion species corresponding to fragments from the AuNP surface can be isolated. In the negative ion mode, many of these fragments correlate to capping structural motifs observed in the literature. In the positive ion mode, the fragment ions do not correlate to predicted structural motifs, but are nearly identical to the positive ions generated from the gold-thiolate AuNP precursor complexes. This suggests that energetic processes during laser deserption/ionization induce a structural rearrangement in the capping gold-thiolate structure of the AuNP, resulting in the generation of positively charged gold-thiolate complexes similar to the precursors of AuNP formation by reduction and negatively charged complexes more representative of the AuNP surface. 10.1021/ac100251d

We have developed glucose and lactate ultramicroelectrode (UME) biosensors based on glucose oxidase and lactate oxidase (with enzymes immobilized onto Pt UMEs by either electropolymerization or casting) for scanning electrochemical microscopy (SECM) and have determined their sensitivity to glucose and lactate, respectively. The results of our evaluations reveal different advantages for sensors constructed by each method: improved sensitivity and shorter manufacturing time for hand-casting, and increased reproducibility for electropolymerization. We have acquired amperometric approach curves (ACs) for each type of manufactured biosensor UME, and these ACs can be used as a means of positioning the UME above a substrate at a known distance. We have used the glucose biosensor UMEs to record profiles of glucose uptake above individual fibroblasts. Likewise, we have employed the lactate biosensor UMEs for recording the lactate production above single cancer cells with the SECM. We also show that oxygen respiration profiles for single cancer cells do not mimic cell topography, but are rather more convoluted, with a higher respiration activity observed at the points where the cell touches the Petri dish. These UME biosensors, along with the application of others already described in the literature, could prove to be powerful tools for mapping metabolic analytes, such as glucose, lactate, and oxygen, in single cancer cells.

There has recently been a surge of interest in the properties and applications of monolayer protected clusters (MPCs). MPCs are metal nanoparticles that have unique optical, chemical, and electrochemical properties resulting from their small size. Because the size defines their properties, MPC particle size fractionation is important for control of the MPC characteristics for use in many potential applications. This paper explores the use of continuous free-flow electrophoresis (CFE) for the size fractionation of N-(2-mercaptopropionyl)glycine (tiopronin) monolayer protected gold clusters into monodisperse nanoparticle samples. CFE is a fractionation technique that isolates monodisperse particle sizes into several different collection vials on the tens of milligrams scale. This allows the MPCs to be separated based on their electrophoretic mobilities into isolated, monodisperse particles across a wide range of sizes. CFE separation of water-soluble tiopronin MPCs yielded fractions that varied in color, UV-visible spectra, transmission electron microscopy (TEM) size histograms, and solubility, indicating narrow size dispersity in the isolated fractions. UV-visible spectrophotometry verified the separation of the tiopronin MPCs through the inspection of surface plasmon resonance peak sizes for the different fractions. TEM was also used to verify the narrowed dispersity of MPC samples. The ability to separate water-soluble nanoparticles into 30 or more fractions in a continuous flow process will enable future studies on their size dependent properties.

A quartz crystal microbalance (QCM) immunosensor was developed for the quantitative detection of glutathione-protected nanoclusters. Advantages intrinsic to QCM were employed to make it an attractive alternative to other immunosensing techniques. We have addressed challenges in the area of QCM mass sensing through experimental correlation between damping resistance and frequency change for a reliable mass measurement. Electrode functionalization was optimized with the use of protein A to immobilize and present polyclonal IgG for antigen binding. This method was developed for the detection of glutathione (antigen)-protected clusters of nanometer size with high surface area and thiolate valency. Quantitation of glutathione--nanocluster binding to immobilized polyclonal antibody provides equilibrium constants ([K.sub.a] = (3.6 [+ or -] 0.2) x [10.sup.5] [M.sup-1]) and kinetic rate constants ([k.sub.f] = (5.4 [+ or -] 0.7) x [10.sup.1] [M.sup.-1] [s.sup.-1] and [k.sub.r] = (1.5 [+ or -] 0.4) x [10.sup.-4] [s.sup.-1]) comparable to literature reports. These observations further imply that immunoreactive nanoparticles have potential in medical diagnostics and materials assembly.

A microphysiometer capable of measuring changes in extracellular glucose, lactate, oxygen, and acidification rate has been developed by incorporating modified electrodes into a standard Cytosensor Microphysiometer plunger. Glucose and lactate are measured indirectly at platinum electrodes by amperometric oxidation of hydrogen peroxide, which is produced from catalysis of glucose and lactate at films containing their respective entrapped oxidase. Oxygen is measured amperometrically at a platinum electrode coated with a Nation film, while the acidification rate is measured potentiometrically by a Cytosensor Microphysiometer. Analytical information is obtained during the Cytosensor stop-flow cycles, where the electrodes measure changes in the extracellular medium corresponding to the consumption or production of the analyte by the cells. Modification of the Cytosensor plunger for multianalyte determination is described, and the operation of the technique is illustrated by the simultaneous measurement of all four analytes during the addition of fluoride and DNP to Chinese hamster ovary cells and fluoride and antimycin A to mouse fibroblast cells. Cell metabolic recovery and dynamics after exposure to agents can also be observed in specific cases.

Solid-state, mixed-valent monolayer-protected Au clusters were studied to determine their electronic conductivity.

The place-exchange and amide-forming coupling reactions for the functionalization of water-soluble tiopronin-monolayer-protected gold clusters are investigated. The synthetic products of these reactions were also examined using 1H and 31P NMR, electrochemistry, capillary electrophoresis and fluorescence spectroscopy. Results demonstrate the potential of poly-functionalized water-soluble nanoparticles for several applications such as biosensors, components for nanoscale electronic devices and electron-transfer mediators for biological reactions.

The electrochemical reduction of tert-butylcalix[8]arene-C60 particle films was studied using the scanning electrochemical microscope combined with a quartz crystal microbalance (QCM) for several electrolytes in MeCN. Complexation of the fullerene within the film results in a negative shift of the peak potential of the first cathodic wave by about 400 mV compared to the reduction of a pure [C.sub.60] film. The QCM indicates a mass loss during reduction of the film. Even in electrolytes where [C.sub.60] anions normally remain in the surface film, a loss of fullerene electrochemical activity occurs. The complex breaks apart upon reduction of the fullerene center, with the fullerene escaping from the calixarene basket into the MeCN solution, leaving the calixarene as an insoluble film on the electrode surface. These results show that the [Pi] electron sharing of the complex is decreased by the additional electron density added to the fullerene by reduction to [C.sub.60].

The design of a combined scanning electrochemical microscope-quartz crystal microbalance (SECM-QCM) with separate potential control of the tip and substrate is described. Both lateral and vertical tip movements near the substrate affect the QCM resonant frequency because of perturbations of the longitudinal and shear waves of the quartz crystal (QC) acoustic wave sensor. The SECM-QCM was used to study etching of a thin Ag layer deposited on the QC contact by generating an etchant, iron(III) tris(bipyridine), at the tip near the surface. The SECM-QCM was also used to monitor film mass and surrounding electrolyte composition during potential cycling of a film of [C.sub.60] on an electrode.

The electrochemical and chemical oxidation of a series of C8-arylamine adducts of 2'-deoxyguanosine is investigated. The oxidations are found to be reversible by cyclic and square-wave voltammetry in both aqueous buffer and aprotic organic solvent and the arylamine adducts have lower oxidation potentials than 8-oxo-7,8-dihydro-2'-deoxyguanosine.

The synthesis of a series of tiopronin monolayer-protected gold nanoclusters (MPCs) and their postsynthesis peptide ligand place-exchange reactions are studied using electrospray ionization time-of-flight mass spectrometry and gel permeation chromatography. The study result shows the first experimental validation of cyclic gold(I)-thiolate tetramer formation in tiopronin monolayer-protected nanoclusters and reports the chemical pathway leading to their formation in MPCs.

A Pt-Ru/herringbone graphitic carbon nanofibresnanocomposite (GCNF) is generated utilizing metal source of single-source molecular originator. Comparative analysis of this nanocomposite and an unsupported Pt-Ru colloid of similar surface area in a functioning direct-methanol fuel cell show an increase of 50% for the Pt-Ru/GCNF nanocomposite activity.

Photosystem I (PSI), a photoactive protein complex that participates in the light reactions of natural photosynthesis, can exhibit photocatalytic capabilities when incorporated to electrochemical systems. Here we present a simulation for the photoelectrochemical behavior of an electrode modified with a monolayer of Photosystem 1 complexes during photochronoamperometric experiments in which the electrode is exposed to periods of darkness and irradiation. A kinetic model is derived from conservation statements for the various oxidation states of the reaction centers of PSI complexes and electrochemical mediators within the system. The kinetic parameters that dictate the performance of the simulation are extracted from experimental data and the resulting simulation is capable of predicting the photochronoamperometric behavior of the system over a range of overpotentials. The model is used to investigate the various contributions to the photocurrent production of the system as well as the effects of the orientation of PSI complexes adsorbed to the electrode surface. [ABSTRACT FROM AUTHOR]

Describes a design of a combined scanning electrochemical microscope-quartz crystal microbalance (SECM-QCM) with separate potential control of the tip and substrate. Details on the use of scanning electrochemical microscopy to study electrochemically active thin films on substrate electrodes; Results of studies conducted.

The electrochemical reduction of 2,4,6-trinitrotoluene (TNT) was investigated using films of vanadium dioxide. Three distinct reduction peaks were observed in the potential range of -0.50 to -0.90 V (vs an Ag/AgCl reference electrode), corresponding to the electrochemical reduction of the three nitro-groups on the TNT molecule. Adsorptive stripping voltammetry was performed to achieve detection down to 1 μg/L (4.4 nM), revealing a linear response to TNT concentration. These results are the first describing the use of VO2 films as an electrochemical sensor and open new avenues for further electrochemical research using this unique material. [ABSTRACT FROM AUTHOR]

The articles describes a laboratory experiment that allows mercury-free analysis of the lead content of drinking water using anodic stripping square wave voltammetry. This laboratory activity combines many important elements of experimental analytical chemistry such as: the ppm/ppb concept; the standard preparation by serial dilution; instrument calibration; matrix effects; and unknown determination by standard addition.

Explores electronic conductivity of solid-state, mixed-valent, monolayer-protected clusters (MPC) of gold. Chemical charging of MPC cores; MPC charge state determination; Chain length dependence on conductivity.

The design of electrode interfaces to achieve efficient electron transfer to biomolecules is important in many bioelectrochemical processes. Within the field of biohybrid solar energy conversion, constructing multilayered Photosystem I (PSI) protein films that maintain good electronic connection to an underlying electrode has been a major challenge. Previous shortcomings include low loadings, long deposition times, and poor connection between PSI and conducting polymers within composite films. Here, we show that PSI protein complexes can be deposited into monolayers within a 30 min timespan by leveraging the electrostatic interactions between the protein complex and the poly(3,4-ethylenedioxythiophene)-polystyrenesulfonate (PEDOT:PSS) polymer. Further, we follow a layer-by-layer (LBL) deposition procedure to produce up to 9-layer pairs of PSI and PEDOT:PSS with highly reproducible layer thicknesses as well as distinct changes in surface composition. When tested in an electrochemical cell employing ubiquinone-0 as a mediator, the photocurrent performance of the LBL films increased linearly by 83 ± 6 nA/cm 2 per PSI layer up to 6-layer pairs. The 6-layer pair samples yielded a photocurrent of 414 ± 13 nA/cm 2 , after which the achieved photocurrent diminished with additional layer pairs. The turnover number (TN) of the PSI-PEDOT:PSS LBL assemblies also greatly exceeds that of drop-casted PSI multilayer films, highlighting that the rate of electron collection is improved through the systematic deposition of the protein complexes and conducting polymer. The capability to deposit high loadings of PSI between PEDOT:PSS layers, while retaining connection to the underlying electrode, shows the value in using LBL assembly to produce PSI and PEDOT:PSS bioelectrodes for photoelectrochemical energy harvesting applications.

The photosynthetic protein complex, photosystem I (PSI), can be photoexcited with a quantum efficiency approaching unity and can be integrated into solar energy conversion devices as the photoactive electrode. The incorporation of PSI into conducting polymer frameworks allows for improved conductivity and orientational control in the photoactive layer. Polyviologens are a unique class of organic polycationic polymers that can rapidly accept electrons from a primary donor such as photoexcited PSI and subsequently can donate them to a secondary acceptor. Monomeric viologens, such as methyl viologen, have been widely used as diffusible mediators in wet PSI-based photoelectrochemical cells on the basis of their suitable redox potentials for accepting electrons. Polyviologens possess similar electronic properties to their monomers with the added advantage that they can shuttle electrons in the solid state. Depositing polyviologen directly onto a film of PSI protein results in significant photocurrent enhancement, which confirms its role as an electron-transport material. The polymer film not only improves the photocurrent by aiding the electron transfer but also helps preserve the protein film underneath. The composite polymer-PSI assembly enhances the charge-shuttling processes from individual protein molecules within the PSI multilayer, greatly reducing charge-transfer resistances. The resulting PSI-based solid-state platform demonstrates a much higher photocurrent than the corresponding photoelectrochemical cell built using a similar architecture.

The photosynthetic protein, photosystem I (PSI), has been used as a photoactive species within a host of biohybrid photoelectrochemical systems. PSI multilayer films at electrode surfaces provide greatly improved solar energy conversion relative to homologous monolayer films. While the photocatalytic effect of PSI multilayers has been theorized as an electrolyte-mediated mechanism, no comprehensive, first-principles modeling study has been presented. In this work, we develop and optimize an electrochemical reaction-diffusion model to replicate the significant electrochemical, physicochemical, and transport processes that underpin photocurrent development of a PSI multilayer film. We use this model to provide strong evidence that PSI's terminal cofactors rapidly exchange electrons with diffusible mediators and stimulate photocurrent principally due to alteration of mediator concentrations at a solution-electrode interface as governed by Butler-Volmer kinetics. Our fitted model accurately replicates photocurrent trends under a variety of conditions, including variable applied bias and PSI multilayer film thickness.

The ability to assess oxygenation within living cells is much sought after to more deeply understand normal and pathological cell biology. Hypoxia Red manufactured by Enzo Life Sciences is advertised as a novel hypoxia detector dependent on nitroreducatase activity. We sought to use Hypoxia Red in primary neuronal cultures to test cell-to-cell metabolic variability in response to hypoxic stress. Neurons treated with 90 min of hypoxia were labeled with Hypoxia Red. We observed that, even under normoxic conditions neurons expressed fluorescence robustly. Analysis of the chemical reactions and biological underpinnings of this method revealed that the high uptake and reduction of the dye is due to active nitroreductases in normoxic cells that are independent of oxygen availability.

Globally, maternal and fetal health is greatly impacted by extraplacental inflammation. Group B Streptococcus (GBS), a leading cause of chorioamnionitis, is thought to take advantage of the uterine environment during pregnancy in order to cause inflammation and infection. In this study, we demonstrate the metabolic changes of murine macrophages caused by GBS exposure. GBS alone prompted a delayed increase in lactate production, highlighting its ability to redirect macrophage metabolism from aerobic to anaerobic respiration. This production of lactate is thought to aid in the development and propagation of GBS throughout the surrounding tissue. Additionally, this study shows that PGE2 priming was able to exacerbate lactate production, shown by the rapid and substantial lactate increases seen upon GBS exposure. These data provide a novel model to study the role of GBS exposure to macrophages with and without PGE2 priming.

The interface between photoactive biological materials with two distinct semiconducting electrodes is challenging both to develop and analyze. Building off of our previous work using films of photosystem I (PSI) on p-doped silicon, we have deposited a crystalline zinc oxide (ZnO) anode using confined-plume chemical deposition (CPCD). We demonstrate the ability of CPCD to deposit crystalline ZnO without damage to the PSI biomaterial. Using electrochemical techniques, we were able to probe this complex semiconductor-biological interface. Finally, as a proof of concept, a solid-state photovoltaic device consisting of p-doped silicon, PSI, ZnO, and ITO was constructed and evaluated.

In this work, we report for the first time the entrapment of the biomolecular supercomplex Photosystem I (PSI) within a conductive polymer network of polyaniline via electrochemical copolymerization. Composite polymer-protein films were prepared on gold electrodes through potentiostatic electropolymerization from a single aqueous solution containing both aniline and PSI. This study demonstrates the controllable integration of large membrane proteins into rapidly prepared composite films, the entrapment of such proteins was observed through photoelectrochemical analysis. PSI's unique function as a highly efficient biomolecular photodiode generated a significant enhancement in photocurrent generation for the PSI-loaded polyaniline films, compared to pristine polyaniline films, and dropcast PSI films. A comprehensive study was then performed to separately evaluate film thickness and PSI concentration in the initial polymerization solution and their effects on the net photocurrent of this novel material. The best performing composite films were prepared with 0.1 μM PSI in the polymerization solution and deposited to a film thickness of 185 nm, resulting in an average photocurrent density of 5.7 μA cm(-2) with an efficiency of 0.005%. This photocurrent output represents an enhancement greater than 2-fold over bare polyaniline films and 200-fold over a traditional PSI multilayer film of comparable thickness.

Over the course of a few billion years, nature has developed extraordinary nanomaterials for the efficient conversion of solar energy into chemical energy. One of these materials, photosystem I (PSI), functions as a photodiode capable of generating a charge separation with nearly perfect quantum efficiency. Because of the favorable properties and natural abundance of PSI, researchers around the world have begun to study how this protein complex can be integrated into modern solar energy conversion devices. This feature article describes some of the recent materials and methods that have led to dramatic improvements (over several orders of magnitude) in the photocurrents and photovoltages of biohybrid electrodes based on PSI, with an emphasis on the research activities in our laboratory.

Photosystem I (PSI) is a photoactive electron-transport protein found in plants that participates in the process of photosynthesis. Because of PSI's abundance in nature and its efficiency with charge transfer and separation, there is a great interest in applying the protein in photoactive electrodes. Here, we developed a completely organic, transparent, conductive electrode using reduced graphene oxide (RGO) on which a multilayer of PSI could be deposited. The resulting photoactive electrode demonstrated current densities comparable to that of a gold electrode modified with a multilayer film of PSI and significantly higher than that of a graphene electrode modified with a monolayer film of PSI. The relatively large photocurrents produced by integrating PSI with RGO and using an opaque, organic mediator can be applied to the facile production of more economic solar energy conversion devices.

We report the fabrication of a hybrid light-harvesting electrode consisting of photosystem I (PSI) proteins extracted from spinach and adsorbed as a monolayer onto electrically contacted, large-area graphene. The transparency of graphene supports the choice of an opaque mediator at elevated concentrations. For example, we report a photocurrent of 550 nA/cm(2) from a monolayer of PSI on graphene in the presence of 20 mM methylene blue, which yields an opaque blue solution. The PSI-modified graphene electrode has a total thickness of less than 10 nm and demonstrates photoactivity that is an order of magnitude larger than that for unmodified graphene, establishing the feasibility of conjoining these nanomaterials as potential constructs in next-generation photovoltaic devices.

New sensing techniques for detecting molecules, especially self-cleaning sensors, are in demand. Here we describe a room-temperature process in which a nanostructured substrate catalyzes the reaction of a target molecule with atmospheric oxygen and the reaction energy is absorbed by the substrate, where it can in principle be detected. Specifically, we report first-principles calculations describing a reaction between 2,4-dinitrotoluene (DNT) and atmospheric O(2) catalyzed by Fe-porphyrin at room temperature, incorporating an oxygen into the methyl group of DNT and releasing 1.9 eV per reaction. The atomic oxygen left on the Fe site can be removed by reacting with another DNT molecule, restoring the Fe catalyst.

Photosystem I (PSI) is a membrane protein complex that generates photoinduced electrons and transfers them across the thylakoid membrane during photosynthesis. The PSI complex, separated from spinach leaves, was spread onto the air-water interface as a monolayer and transferred onto a gold electrode surface that was precoated with a self-assembled monolayer (SAM). The electrochemical properties of the transferred PSI monolayer, including cyclic voltammetry and photoinduced chronoamperometry, were measured. The results showed that PSI retained its bioactivity after the manipulation. Its capability of converting photoenergy into electrical potential was demonstrated by its reducing an electron acceptor, dichloroindophenol (DCIP), and by oxidizing an electron donor, sodium ascorbate (ASC). We have shown that the protein has two possible orientations at the water interface. The orientation distribution was determined by comparing the controlled reductive and oxidative photocurrents generated from Langmuir-Blodgett and Langmuir-Schaefer monolayers.

Metabolic profiling of macrophage metabolic response upon exposure to 4-hydroxynonenal (HNE) demonstrates that HNE does not simply inactivate superoxide-generating enzymes but also could be responsible for the impairment of downfield signaling pathways. Multianalyte microphysiometry (MAMP) was employed to simultaneously measure perturbations in extracellular acidification, lactate production, and oxygen consumption for the examination of aerobic and anaerobic pathways. Combining the activation of oxidative burst with phorbol myristate acetate (PMA) and the immunosuppression with HNE, the complex nature of HNE toxicity was determined to be concentration- and time-dependent. Further analysis was utilized to assess the temporal effect of HNE on reactive oxygen species (ROS) production and on protein kinase C (PKC). Increased levels of HNE with decreasing PKC activity suggest that PKC is a target for HNE adductation prior to oxidative burst. Additionally, localization of PKC to the cell membrane was prevented with the introduction of HNE, demonstrating a consequence of HNE adductation on NADPH activation. The impairment of ROS by HNE suggests that HNE has a greater role in foam cell formation and tissue damage than is already known. Although work has been performed to understand the effect of HNE's regulation of specific signaling pathways, details regarding its involvement in cellular metabolism as a whole are generally unknown. This study examines the impact of HNE on macrophage oxidative burst and identifies PKC as a key protein for HNE suppression and eventual metabolic response.

Metabolic adaptation to stress is a crucial yet poorly understood phenomenon, particularly in the central nervous system (CNS). The ability to identify essential metabolic events which predict neuronal fate in response to injury is critical to developing predictive markers of outcome, for interpreting CNS spectroscopic imaging, and for providing a richer understanding of the relevance of clinical indices of stress which are routinely collected. In this work, real-time multianalyte microphysiometry was used to dynamically assess multiple markers of aerobic and anaerobic respiration through simultaneous electrochemical measurement of extracellular glucose, lactate, oxygen, and acid. Pure neuronal cultures and mixed cultures of neurons and glia were compared following a 90 min exposure to aglycemia. This stress was cytotoxic to neurons yet resulted in no appreciable increase in cell death in age-matched mixed cultures. The metabolic profile of the cultures was similar in that aglycemia resulted in decreases in extracellular acidification and lactate release in both pure neurons and mixed cultures. However, oxygen consumption was only diminished in the neuron enriched cultures. The differences became more pronounced when cells were returned to glucose-containing media upon which extracellular acidification and oxygen consumption never returned to baseline in cells fated to die. Taken together, these data suggest that lactate release is not predictive of neuronal survival. Moreover, they reveal a previously unappreciated relationship of astrocytes in maintaining oxygen uptake and a correlation between metabolic recovery of neurons and extracellular acidification.

Using the abundance of available electrons generated by immobilized multilayers of the photoactive protein complex Photosystem I (PSI), we have photoreduced platinum particles that are catalytically active for the H(2)/H(+) redox couple. The resulting platinized PSI films were optimized using electrochemical measurements and then characterized using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and scanning electrochemical microscopy (SECM). These results demonstrate a novel method for generating immobilized platinum catalysts that are readily available on the surface of a photoactive PSI multilayer.

Monolayer-protected gold nanoparticles have great potential as novel building blocks for the design of new drugs and therapeutics based on the easy ability to multifunctionalize them for biological targeting and drug activity. In order to create nanoparticles that are biocompatible in vivo, polyethylene glycol functional groups have been added to many previous multifunctionalized particles to eliminate nonspecific binding. Recently, monolayer-protected gold nanoparticles with mercaptoglycine functionalities were shown to elicit deleterious effects on the kidney in vivo that were eliminated by incorporating a long-chain, mercapto-undecyl-tetraethylene glycol at very high loadings into a mixed monolayer. These long-chain PEGs induced an immune response to the particle presumably generating an anti-PEG antibody as seen in other long-chain PEG-ylated nanoparticles in vivo. In the present work, we explore the in vivo effects of high and low percent ratios of a shorter chain, mercapto-tetraethylene glycol within the monolayer using simple place-exchange reactions. The shorter chain PEG MPCs were expected to have better water solubility due to elimination of the alkyl chain, no toxicity, and long-term circulation in vivo. Shorter chain lengths at lower concentrations should not trigger the immune system to create an anti-PEG antibody. We found that a 10% molar exchange of this short-chain PEG within the monolayer met three of the desired goals: high water solubility, no toxicity, and no immune response as measured by white blood cell counts. However, none of the short-chain PEG mixed monolayer compositions enabled the nanoparticles to have a long circulation time within the blood as compared to mercapto-undecyl-ethylene glycol, which had a residence time of 4 weeks. We also compared the effects of a hydroxyl versus a carboxylic acid terminal functional group on the end of the PEG thiol on both clearance and immune response. The results indicate that short-chain-length PEGs, regardless of termini, increase clearance rates compared to the previous long-chain PEG studies, while carboxylated termini increase red blood cell counts at high loadings. Given these findings, short-chain, alcohol-terminated PEG, exchanged at 10%, was identified as a potential nanoparticle for further in vivo applications requiring short circulation lifetimes with desired features of no toxicity, no immune response, and high water solubility.

Monolayer protected clusters (MPCs) are small, metal nanoparticles capped with thiolate ligands that have been widely studied for their size-dependent properties and for their ability to be functionalized for biological applications. Common water-soluble MPCs, functionalized by N-(2-Mercaptopropionyl)-glycine (tiopronin) or glutathione, have been used previously to interface with biological systems. These MPCs are ideal for biological applications not only due to their water-solubility but also their small size (<5 nm). These characteristics are expected to enable easy biodistribution and clearance. In this article, we show an unexpected toxicity is associated with the tiopronin monolayer protected cluster (TMPC), making it incompatible for potential in vivo applications. This toxicity is linked to significant histological damage to the renal tubules, causing mortality at concentrations above 20 μM. We further show how the incorporation of poly ethylene glycol (PEG) by a simple place-exchange reaction eliminates this toxicity. We analyzed gold content within blood and urine and found an increased lifetime of the particle within the bloodstream due to the creation of the mixed monolayer. Also shown was the elimination of kidney damage with the use of the mixed-monolayer particle via Multistix analysis, MALDI-TOF MS analysis, and histological examination. Final immunological analysis showed no effect on white blood cell (WBC) count for the unmodified particle and a surprising increase in WBC count with the injection of mixed monolayer particles at concentrations higher than 30 μM, suggesting that there may be an immune response to these mixed monolayer nanoparticles at high concentrations; therefore, special attention should be focused on selecting the best capping ligands for use in vivo. These findings make the mixed monolayer an excellent candidate for further biological applications using water-soluble nanoparticles.

Plants and some types of bacteria demonstrate an elegant means to capitalize on the superabundance of solar energy that reaches our planet with their energy conversion process called photosynthesis. Seeking to harness Nature's optimization of this process, we have devised a biomimetic photonic energy conversion system that makes use of the photoactive protein complex Photosystem I, immobilized on the surface of nanoporous gold leaf (NPGL) electrodes, to drive a photoinduced electric current through an electrochemical cell. The intent of this study is to further the understanding of how the useful functionality of these naturally mass-produced, biological light-harvesting complexes can be integrated with nonbiological materials. Here, we show that the protein complexes retain their photonic energy conversion functionality after attachment to the nanoporous electrode surface and, further, that the additional PSI/electrode interfacial area provided by the NPGL allows for an increase in PSI-mediated electron transfer with respect to an analogous 2D system if the pores are sufficiently enlarged by dealloying. This increase of interfacial area is pertinent for other applications involving electron transfer between phases; thus, we also report on the widely accessible and scalable method by which the NPGL electrode films used in this study are fabricated and attached to glass and Au/Si supports and demonstrate their adaptability by modification with various self-assembled monolayers. Finally, we demonstrate that the magnitude of the PSI-catalyzed photocurrents provided by the NPGL electrode films is dependent upon the intensity of the light used to irradiate the electrodes.

Photosystem I (PSI) has drawn widespread interest for use in biomimetically inspired energy conversion devices upon extracting it from plants or cyanobacteria and assembling it at surfaces. Here, we demonstrate that a critically dense monolayer of spinach-derived PSI must be formed on an electrode surface to achieve optimal photocurrents, and we introduce a new method for preparing these dense PSI monolayers that reduces the time required for assembly by approximately 80-fold in comparison to that for adsorption from solution. This method consists of applying a vacuum above the aqueous PSI solution during assembly to concentrate PSI and precipitate it into a thick layer onto the surface of various self-assembled monolayers or directly onto the electrode surface. Rinsing with water yields a dense monolayer of PSI that draws approximately 100 nA/cm2 of light-induced current from the gold electrode in the presence of appropriate mediators.

In this paper, we describe a novel method for measuring the forward heterogeneous electron-transfer rate constant (kf) through the thiol monolayer of gold monolayer protected clusters (MPCs) in solution using scanning electrochemical microscopy (SECM). Applying the equations for mixed mass-transfer and electron-transfer processes, we develop a new formula using only the diffusion coefficient and the tip radius and use it as part of a new method for evaluating SECM approach curves. This method is applied to determine the electron-transfer rates from a series of SECM approach curves for monodisperse hexanethiol MPCs and for polydisperse hexanethiol, octanethiol, decanethiol, dodecanethiol, and 2-phenyethylthiol gold MPCs. Our results show that as the alkanethiol length increases the rate of electron transfer decreases in a manner consistent with the previously proposed tunneling mechanism for the electron transfer in MPCs. However, the effective tunneling coefficient, Beta, is found to be only 0.41 A-1 for alkanethiol passivated MPCs compared to typical values of 1.1 A-1 for alkanethiols as self-assembled monolayers on two-dimensional gold substrates. Similar SECM approach curve results for Pt and Au MPCs indicate that the electron-transfer rate is dependent mostly on the composition of the thiol layer and not on differences in the core metal.