Search

Current thermally conductive and electrically insulating insulation systems are struggling to meet the needs of modern electronics due to increasing heat generation and power densities. Little research has focused on creating insulation systems that excel at both dissipating heat and withstanding high voltages (i.e., have both high thermal conductivity and a high breakdown strength). Herein, a polyelectrolyte-based multilayer nanocomposite is demonstrated to be a thermally conductive high-voltage insulation. Through inclusion of both boehmite and vermiculite clay, the breakdown strength of the nanocomposite was increased by ≈115%. It was also found that this unique nanocomposite has an increase in its breakdown strength, modulus, and hydrophobicity when exposed to elevated temperatures. This readily scalable insulation exhibits a remarkable combination of breakdown strength (250 kV/mm) and thermal conductivity (0.16 W m -1 K -1 ) for a polyelectrolyte-based nanocomposite. This dual clay insulation is a step toward meeting the needs of the next generation of high-performance insulation systems., Competing Interests: The authors declare no competing financial interest., (© 2023 American Chemical Society.)

Most current flame-retardant nanocoatings for flexible polyurethane foam (PUF) consist of passive barriers, such as clay, graphene oxide, or metal hydroxide. In an effort to develop a polymeric and environmentally benign nanocoating for PUF, positively charged chitosan (CH) and anionic sodium hexametaphosphate (PSP) were deposited using layer-by-layer (LbL) assembly. Only six bilayers of CH/PSP film can withstand flame penetration during exposure to a butane torch (∼1400 °C) for 10 s and stop flame spread on the foam. Additionally, cone calorimetry reveals that the fire growth rate, peak heat release rate, and maximum average rate of heat emission are reduced by 55, 43, and 38%, respectively, compared with uncoated foam. This multilayer thin film quickly dehydrates to form an intumescent charred exoskeleton on the surface of the open-celled structure of polyurethane, inhibiting heat transfer and completely eliminating melt dripping. This entirely polymeric nanocoating provides a safe and effective alternative for reducing the fire hazard of polyurethane foam that is widely used for cushioning and insulation.

Self-cleaning surfaces allow the reversible attachment and detachment of microorganisms which show great promise in regards to their reusability as smart biomaterials. However, a widely used biomaterial such as polydimethylsiloxane (PDMS) suffers from high biofouling activity and hydrophobic recovery that results in decreased efficiency and stability. A current challenge is to modify and fabricate self-cleaning PDMS surfaces by incorporating antifouling and pH-sensitive properties. To address this, we synthesized a zwitterionic and pH-sensitive random poly(glycidyl methacrylate- co-sulfobetaine methacrylate- co-2-(dimethylamino)ethyl methacrylate) polymer, poly(GMA- co-SBMA- co-DMAEMA). In this work, chemical modification of PDMS was done by grafting onto poly(GMA- co-SBMA- co-DMAEMA) after surface activation via UV and ozone for 90 min to ensure the formation of covalent bonds necessary for stable grafting. The PDMS grafted with G20-S40-D40 exhibit antifouling and pH-sensitive properties by mitigating fibrinogen adsorption, blood cell adhesion, and releasing 98% adhered E. coli bacteria after immersion at basic pH. The grafting of poly(GMA- co-SBMA- co-DMAEMA) presented in this work shows attractive potential for biomedical and industrial applications as a simple, smart, and effective method for the modification of PDMS interfaces.

A graphene field-effect transistor (G-FET) with the spacious planar graphene surface can provide a large-area interface with cell membranes to serve as a platform for the study of cell membrane-related protein interactions. In this study, a G-FET device paved with a supported lipid bilayer (referred to as SLB/G-FET) was first used to monitor the catalytic hydrolysis of the SLB by phospholipase D. With excellent detection sensitivity, this G-FET was also modified with a ganglioside G M1 -enriched SLB (G M1 -SLB/G-FET) to detect cholera toxin B. Finally, the GM1-SLB/G-FET was employed to monitor amyloid-beta 40 (Aβ40) aggregation. In the early nucleation stage of Aβ40 aggregation, while no fluorescence was detectable with traditional thioflavin T (ThT) assay, the prominent electrical signals probed by G M1 -SLB/G-FET demonstrate that the G-FET detection is more sensitive than the ThT assay. The comprehensive kinetic information during the Aβ40 aggregation could be collected with a G M1 -SLB/G-FET, especially covering the kinetics involved in the early stage of Aβ40 aggregation. These experimental results suggest that SLB/G-FETs hold great potential as a powerful biomimetic sensor for versatile investigations of membrane-related protein functions and interaction kinetics.

Polycyclic aromatic hydrocarbons (PAHs) are widely distributed throughout the atmosphere as mixtures attached to ambient particulate matter (PM). PAHs usually elicit similar toxicological pathways but do so with varying levels of efficacy. In this study, we utilized high-throughput screening (HTS) in vitro data of PAHs to predict health risks associated with coarse and fine PM. PM samples with 22 PAH compounds obtained from residential areas close to industrial parks in central Taiwan were analyzed. On the basis of the PM-bound PAH concentrations and their activities reported in HTS assays, we developed a probabilistic model for estimating cumulative exposure of humans to PAHs. Activity-to-exposure ratio (AER) values were calculated to compare relative risks of activating the aryl hydrocarbon receptor (AhR), nuclear factor erythroid 2-related factor 2 (Nrf2), and tumor suppressor gene (p53) when children or adults were exposed to fine or coarse PM in different seasons. On the basis of AER values, the risk of fine PM exposure was relatively higher than the risk of exposure to coarse PM in pathway activation. Children as a susceptible population had a risk of the activating AhR pathway greater than that of adults. Particularly higher risks were observed in winter than in summer. Among three pathways, AhR was the most sensitive one activated by exposure to PAHs. In addition, the activation of the AhR, Nrf2, and p53 pathways was compared by in vitro reporter assays with and without the pre-extraction of PAHs from PM. Our proposed novel approach accounts for mixture toxicities in characterizing in vitro pathway-based risks via inhalation exposure to ambient PAHs.

In this study, we report a novel, one-step synthesis method to fabricate multilayer graphene (MLG)-wrapped copper nanoparticles (CuNPs) directly on various substrates (e.g., polyimide film (PI), carbon cloth (CC), or Si wafer (Si)). The electrical resistivities of the pristine MLG-CuNPs/PI and MLG-CuNPs/Si were measured 1.7 × 10 -6 and 1.4 × 10 -6 Ω·m, respectively, of which both values are ∼100-fold lower than earlier reports. The MLG shell could remarkably prevent the Cu nanocore from serious damages after MLG-CuNPs being exposed to various harsh conditions. Both MLG-CuNPs/PI and MLG-CuNPs/Si retained almost their conductivities after ambient annealing at 150 °C. Furthermore, the flexible MLG-CuNPs/PI exhibits excellent mechanical durability after 1000 bending cycles. We also demonstrate that the MLG-CuNPs/PI can be used as promising source-drain electrodes in fabricating flexible graphene-based field-effect transistor (G-FET) devices. Finally, the MLG-CuNPs/CC was shown to possess high performance and durability toward hydrogen evolution reaction (HER).

The surface morphology in polycrystalline silicon (poly-Si) film is an issue regardless of whether conventional excimer laser annealing (ELA) or the newer metal-induced lateral crystallization (MILC) process is used. This paper investigates the stress distribution while undergoing long-term mechanical stress and the influence of stress on electrical characteristics. Our simulated results show that the nonuniform stress in the gate insulator is more pronounced near the polysilicon/gate insulator edge and at the two sides of the polysilicon protrusion. This stress results in defects in the gate insulator and leads to a nonuniform degradation phenomenon, which affects both the performance and the reliability in thin-film transistors (TFTs). The degree of degradation is similar regardless of bending axis (channel-length axis, channel-width axis) or bending type (compression, tension), which means that the degradation is dominated by the protrusion effects. Furthermore, by utilizing long-term electrical bias stresses after undergoing long-tern bending stress, it is apparent that the carrier injection is severe in the subchannel region, which confirms that the influence of protrusions is crucial. To eliminate the influence of surface morphology in poly-Si, three kinds of laser energy density were used during crystallization to control the protrusion height. The device with the lowest protrusions demonstrates the smallest degradation after undergoing long-term bending.

Hybridization of solution nucleic acids to DNA brushes is widely encountered in diagnostic and materials science applications. Typically, brush chain lengths of ten or more nucleotides are used to provide the needed sequence specificity and binding affinity. At these lengths, coincidental occurrence of complementary regions is expected to lead to associations between the nominally single-stranded brush chains due to intra- or interchain base pairing. This report investigates how these associations impact the brushes' hybridization activity toward complementary "target" sequences. Brushes were prepared from 20-mer chains with four-nucleotide-long "adhesive regions" through which neighboring chains could interact. The affinity and position of the adhesive region along the chain backbone were varied. DNA brushes were exposed to complementary solution targets, and the corresponding melting transitions were measured to estimate free energies of the brush-target hybridization. These results revealed that higher affinity adhesive regions more extensively suppressed brush hybridization relative to hybridization in solution. Associations near the middle of the chains were found to be more penalizing than those at the immobilized or the free end of the chains. Provided that the brush chains were close enough to associate, changes in brush density did not exert a significant effect on hybridization thermodynamics within the investigated coverage window. Comparison of the DNA brush results with those from commercial Affymetrix single-nucleotide-polymorphism (SNP) microarrays revealed agreement in the impact of chain associations on hybridization.

Advanced membranes that combine mechanical robustness with fast permeation are crucial to many applications such as water purification, ions selectivity, and gas separation. Graphene sheets offer a promising opportunity to fabricate thin, high-flux, and pressure-endurable membranes because of their unique 2D morphology, oxidizable surface, and electrical conductivity. We herein report a highly effective yet simple approach to the fabrication of graphene membranes featuring controllable oxidation degrees and thus tunable structures and properties. The graphene sheets comprise a single or a few layers with a lateral dimension of 50-100 nm; their C/O ratios can be manipulated from 4.1 for graphene with a low degree of oxidation (low-oxidation graphene) to 2.5 for medium-oxidation graphene to 1.3 for high-oxidation graphene, by controlling the proportion of phosphoric acid during the 60 min fabrication. Fabricated by simple vacuum filtration, the membranes exhibited various water flux from 200.0 to 20.0 L/m(2)·h·bar at 3 bar of pressure and mechanical robustness (Young's modulus can be up to 20 GPa and tensile strength to 100 MPa). When these membranes were used as electrodes for supercapacitors, specific capacitances of 58.8 F/g and 23.5 F/cm(3) were recorded for the low-oxidation graphene membrane at 1 A/g by a two-electrode configuration; the capacity values retained ∼95% after 800 cycles; the high capacitance would be caused by moderate wettability and high electrical conductivity.

Electrophotoluminescence (E-PL) spectra, i.e., plots of the electric-field-induced change in photoluminescence intensity as a function of wavenumber, have been measured for pyrene solution. At high concentrations of pyrene where excimer fluorescence is observed along with the monomer fluorescence emitted from the locally excited state, both excimer fluorescence and monomer fluorescence are enhanced by application of electric fields. The results show that the nonradiative decay process at the excimer emitting state is decelerated by application of electric fields. It is also found that molecular polarizability of pyrene excimer is larger than that of pyrene monomer in the ground state by ~270 ± 90 Å(3), based on the analysis of the Stark shift of the excimer fluorescence.

Time-resolved infrared emission of CO(2) and OCS was observed in reactions O((3)P) + OCS and O((1)D) + OCS with a step-scan Fourier transform spectrometer. The CO(2) emission involves Deltanu(3) = -1 transitions from highly vibrationally excited states, whereas emission of OCS is mainly from the transition (0, 0 degrees , 1) --> (0, 0 degrees , 0); the latter derives its energy via near-resonant V-V energy transfer from highly excited CO(2). Rotationally resolved emission lines of CO (v

A mixture of O(3) and CO(2) was irradiated with light from a KrF laser at 248 nm; time-resolved infrared emission of CO(2) in the region 2000-2400 cm(-1) was observed with a Fourier transform spectrometer. This emission involves one quantum in the asymmetric stretching mode (nu(3)) of CO(2) in highly vibrationally excited states. The band contour agrees satisfactorily with a band shape calculated based on a simplified polyad model of CO(2) and a vibrational distribution estimated through a statistical partitioning of energy of approximately 13,000 cm(-1), approximately 3100 cm(-1) smaller than the available energy, into the vibrational modes of CO(2). From this model, approximately 44% and 5% of the available energy of O((1)D) + CO(2) is converted into the vibrational and rotational energy of product CO(2), respectively, consistent with previous reports of approximately 50% for the translational energy. An extent of rotational excitation of CO(2) much smaller than that expected from statistical calculations indicates a mechanism that causes a small torque to be given to CO(2) when an O atom leaves the complex CO(3) on the triplet exit surface of potential energy, consistent with quantum-chemical calculations.

To survive in variable soil conditions, plants possess homeostatic mechanisms to maintain a suitable concentration of essential heavy metal ions. Certain plants, inhabiting heavy metal-enriched or -contaminated soil, thus are named hyperaccumulators. Studying hyperaccumulators has great potential to provide information for phytoremediation. To better understand the hyperaccumulating mechanism, we used an Arabidopsis cDNA microarray to compare the gene expression of the Zn/Cd hyperaccumulator Arabidopsis halleri and a nonhyperaccumulator, Arabidopsis thaliana. By analyzing the expression of metal-chelators, antioxidation-related genes, and transporters, we revealed a few novel molecular features. We found that metallothionein 2b and 3, APX and MDAR4 in the ascorbate-glutathione pathway, and certain metal transporters in P(1B)-type ATPase, ZIP, Nramp, and CDF families, are expressed at higher levels in A. halleri than in A. thaliana. We further validated that the enzymatic activity of ascorbate peroxidase and class III peroxidases are highly elevated in A. halleri. This observation positively correlates with the higher ability of A. halleri to detoxify H2O2 produced by cadmium and paraquat treatments. We thus suggest that higher peroxidase activities contribute to the heavy metal tolerance in A. halleri by alleviating the ROS damage. We have revealed genes that could be candidates for the future engineering of plants with large biomass for use in phytoremediation.

Quinones are present in trace amounts in natural organic matter. The addition of thiol compounds to quinones produces reactive electron-transfer species that may be important for the transformation of chlorinated hydrocarbons under sulfate-reducing conditions. This study systematically investigated the transformation of carbon tetrachloride (CCl4) in homogeneous aqueous solutions containing quinones as electron-transfer mediators and thiol compounds as bulk reductants. The thiol compounds, including sodium hydrosulfide (NaHS) and cysteine, were found to effectively transform CCl4. The transformation of CCl4 followed pseudo-first-order kinetics, and the pseudo-first-order rate constants (kobs) were (3.24 +/- 0.46) x 10(-7) and 1.04 x 10(-7) s(-1), respectively, when solutions contained NaHS and cysteine alone. Addition of quinone compounds, including anthraquinone-2,6-disulfonate (AQDS), benzoquinone (BQ), juglone (JQ), naphthoquinone (NQ), lawsone (LQ), and menadione (MQ), increased the transformation rate and efficiency of CCl4. The kobs values for CCl4 transformation in the presence of quinones were 2.6-71 times higher than those for the thiol compounds alone. The enhancement efficiency followed the order JQ > NQ > BQ >> AQDS > LQ > MQ. Spectroscopic studies indicated that the quinone compounds generated various active electron-transfer mediators to transfer electrons from the bulk reductants to CCl4. BQ and NQ produced mercaptoquinones as active redox mediators that significantly enhanced the transformation rate of CCl4 in the presence of NaHS. The addition of thiol reductants produced large amounts of AQDS semiquinone radical as the electron shuttle. In addition, MQ and LQ were reduced by NaHS to give hydroquinone, which slightly enhanced the transformation efficiency of CCl4. These results clearly indicate that the enhanced efficiency of quinones for the transformation of chlorinated hydrocarbons is specifically related to the produced reactive species. Mercaptoquinone is a more active mediator than either semiquinone or hydroquinone for transferring electrons in a reducing environment containing thiol reductants.

Hibiscus sabdariffa L., a local soft drink material and medicinal herb, is usually used effectively in native medicines against hypertension, pyrexia, and liver disorders. Here, we report an extract, HSE (H. sabdariffa extract), which is designed to exhibit hypolipidemia and antiatherosclerotic effects in rabbits with experimental atherosclerosis. New Zealand White rabbits were fed with a normal diet, high cholesterol (1.3%), lard oil (3%) diet (HCD) with or without 0.5 or 1% HSE for 10 weeks. The levels of triglyceride, cholesterol, and low-density lipoprotein cholesterol (LDL-C) were lower in the serum of rabbits fed HCD plus HSE than in the serum of rabbits fed HCD. Feeding HSE (0.5 and 1% in the diet) to rabbits significantly reduced severe atherosclerosis in the aorta. Histopathological examination showed that HSE reduced foam cell formation and inhibited smooth muscle cell migration and calcification in the blood vessel of rabbits. These results suggest that HSE inhibits serum lipids and shows an antiatherosclerotic activity.

The objectives of this study were to isolate the antioxidative components in the broth filtrate of Aspergillus candidus (CCRC 31543), to characterize their antioxidative properties, and to evaluate their safety. Three major compounds were isolated and identified as 3,3' '-dihydroxyterphenyllin, 3-hydroxyterphenyllin, and candidusin B. In the linoleic acid peroxidation system, the inhibition of peroxidation in these three compounds was greater than 95% and was significantly higher than that of alpha-tocopherol but equal to that of BHA at 12.5-200 microg/mL. As measured using the Rancimat method in lard, 3,3' '-di-OH-terphenyllin exhibited a protection factor value of 7.82, which was substantially higher than those of BHA (5.58) and alpha-tocopherol (4.29) at 200 microg/mL. 3,3' '-di-OH-terphenyllin and 3-OH-terphenyllin also exhibited marked scavenging effects on the alpha,alpha-diphenyl-beta-picrylhydrazyl radicals (94.7 and 96.0%, respectively), which were similar to those of BHA and alpha-tocopherol. Safety studies showed that these three compounds were neither cyto- nor geno-toxic toward human intestine 407 (INT 407) cells, nor mutagenic toward Salmonella typhimurium TA98 and TA100.