Search

The aim of this paper is to design near-infrared (NIR) Al 3+ fluorescent probes based on a Schiff base to extend their applications in biological systems. By combining benzo[ h ]quinoline unit and salicylaldehyde acylhydrazone, we designed two new Schiff base derivatives. According to theoretical simulations on previous experimental Al 3+ probes, we obtained the appropriate theoretical approaches to describe the properties of these fluorescent probes. By employing such approaches on our newly designed molecules, it is found that the new molecules have high selectivity toward Al 3+ and that their corresponding Al 3+ complexes can emit NIR fluorescence. As a result, they are expected to be potential NIR Al 3+ fluorescent probes.

We report here on an optical ion sensing platform, in which a polymeric membrane ion-selective electrode (ISE) serves as not only a potentiometric transducer for ion activities in the sample solution but also a reference electrode for the potential-modulated release of enzyme from an iron-alginate-horseradish peroxidase (HRP) thin film modified working electrode. The ISE and working electrode are physically separated by a salt bridge. The dissolution of the HRP-embedded thin film can be triggered by the reduction of Fe 3+ , which is modulated by the potential response of the ISE to the target ion in the sample. The released enzyme induces the oxidation of its substrate mediated by H 2 O 2 to produce a visual color change. With this setup, an optical ion sensing platform for both cations (e.g., NH 4 + ) and anions (e.g., Cl - ) can be obtained. The proposed platform provides a general and versatile visual-sensing strategy for ions and allows optical ion sensing in colored and turbid solutions.

Sensing of metal ions and anions is of great importance because of their widespread distribution in environmental systems and biological processes. Colorimetric and fluorescent chemosensors based on organic molecular species have been demonstrated to be effective for the detection of various ions and possess the significant advantages of low cost, high sensitivity, and convenient implementation. Of the available classes of organic molecules, porphyrin analogues possess inherently many advantageous features, making them suitable for the design of ion chemosensors, with the targeted sensing behavior achieved and easily modulated based on their following characteristics: (1) NH moieties properly disposed for binding of anions through cooperative hydrogen-bonding interactions; (2) multiple pyrrolic N atoms or other heteroatoms for selectively chelating metal ions; (3) variability of macrocycle size and peripheral substitution for modulation of ion selectivity and sensitivity; and (4) tunable near-infrared emission and good biocompatibility. In this Review, design strategies, sensing mechanisms, and sensing performance of ion chemosensors based on porphyrin analogues are described by use of extensive examples. Ion chemosensors based on normal porphyrins and linear oligopyrroles are also briefly described. This Review provides valuable information for researchers of related areas and thus may inspire the development of more practical and effective approaches for designing high-performance ion chemosensors based on porphyrin analogues and other relevant compounds.

An efficient electrochemical sensor was presented for lead cation detection using a DNA functionalized iron-porphyrinic metal-organic framework (GR-5/(Fe-P)n-MOF) as a probe. The newly designed probe showed both the recognition behavior of GR-5 to Pb(2+) with high selectivity and the excellent mimic peroxidase performance of (Fe-P)n-MOF. In the presence of Pb(2+), GR-5 could be specifically cleaved at the ribonucleotide (rA) site, which produced the short (Fe-P)n-MOF-linked oligonucleotide fragment to hybridize with hairpin DNA immobilized on the surface of screen-printed carbon electrode (SPCE). Because of the mimic peroxidase property of (Fe-P)n-MOF, enzymatically amplified electrochemical signal was obtained to offer the sensitive detection of Pb(2+) ranging from 0.05 to 200 nM with a detection limit of 0.034 nM. In addition, benefiting from the Pb(2+)-dependent GR-5, the proposed assay could selectively detect Pb(2+) in the presence of other metal ions. The SPCE based electrochemical sensor along with the GR-5/(Fe-P)n-MOF probe exhibited the advantages of low-cost, simple fabrication, high sensitivity and selectivity, providing potential application of on-site and real-time Pb(2+) detection in complex media.

Ionophore-based ion selective optical nanosensors that operate independently of the sample pH are developed here by the use of electrically charged solvatochromic dyes as signal transducers. A series of dye molecules with a D-π-A structure was synthesized and characterized in various solvents and incorporated into ion selective nanospheres for K(+), Na(+), and H(+). Since dye leakage was greatly suppressed when the solvatochromic dyes were encapsulated in the nanosphere core, ion sensing nanospheres were explored for cellular ion imaging in Dictyostelium discoideum live cells but spontaneous dye loss resulted in undesired staining of cells. The in vitro analysis of potassium in human plasma was successfully demonstrated with this approach. A theoretical model was developed for the response of the ion selective nanosensors containing charged solvatochromic dyes. The nanosensors exhibited a tunable response range, high sensitivity, and good stability.

Cationic gene delivery agents (vectors) are important for delivering nucleotides, but are also responsible for cytotoxicity. Cationic polymers (L-PEI, jetPEI, and G5 PAMAM) at 1× to 100× the concentrations required for translational activity (protein expression) induced the same increase in plasma membrane current of HEK 293A cells (30-50 nA) as measured by whole cell patch-clamp. This indicates saturation of the cell membrane by the cationic polymers. The increased currents induced by the polymers are not reversible for over 15 min. Irreversibility on this time scale is consistent with a polymer-supported pore or carpet model and indicates that the cell is unable to clear the polymer from the membrane. For polyplexes, although the charge concentration was the same (at N/P ratio of 10:1), G5 PAMAM and jetPEI polyplexes induced a much larger current increase (40-50 nA) than L-PEI polyplexes (<20 nA). Both free cationic lipid and lipid polyplexes induced a lower increase in current than cationic polymers (<20 nA). To quantify the membrane bound material, partition constants were measured for both free vectors and polyplexes into the HEK 293A cell membrane using a dye influx assay. The partition constants of free vectors increased with charge density of the vectors. Polyplex partition constants did not show such a trend. The long lasting cell plasma permeability induced by exposure to the polymer vectors or the polyplexes provides a plausible mechanism for the toxicity and inflammatory response induced by exposure to these materials.

Despite long-standing efforts, there is no agreed upon structural model for electrolyte solutions at air-liquid interfaces. We report the simultaneous detection of the near-surface and bulk coordination environments of a trivalent metal cation (europium) in an aqueous solution by use of X-ray absorption spectroscopy. Within the first few nanometers of the liquid surface, the cations exhibit oxygen coordination typical of inner-sphere hydration of an aquated Eu(3+) cation. Beyond that, outer-sphere ion-ion correlations are observed that are otherwise not present in the bulk electrolyte. The combination of near-surface and bulk sensitivities to probe metal ion speciation in electrolyte solutions is achieved by detecting electron-yield and X-ray fluorescence signals from an inverted pendant drop. The results provide new knowledge about the near-surface chemistry of aqueous solutions of relevance to aerosols and ion transport processes in chemical separations and biological systems.

Black carbon is an important constituent of atmospheric aerosol particle matter (PM) with significant effects on the global radiation budget and on human health. The soot particle aerosol mass spectrometer (SP-AMS) has been developed and deployed for real-time ambient measurements of refractory carbon particles. In the SP-AMS, black carbon or metallic particles are vaporized through absorption of 1064 nm light from a CW Nd:YAG laser. This scheme allows for continuous "soft" vaporization of both core and coating materials. The main focus of this work is to characterize the extent to which this vaporization scheme provides enhanced chemical composition information about aerosol particles. This information is difficult to extract from standard SP-AMS mass spectra because they are complicated by extensive fragmentation from the harsh 70 eV EI ionization scheme that is typically used in these instruments. Thus, in this work synchotron-generated vacuum ultraviolet (VUV) light in the 8-14 eV range is used to measure VUV-SP-AMS spectra with minimal fragmentation. VUV-SP-AMS spectra of commercially available carbon black, fullerene black, and laboratory generated flame soots were obtained. Small carbon cluster cations (C(+)-C5(+)) were found to dominate the VUV-SP-AMS spectra of all the samples, indicating that the corresponding neutral clusters are key products of the SP vaporization process. Intercomparisons of carbon cluster ratios observed in VUV-SP-AMS and SP-AMS spectra are used to confirm spectral features that could be used to distinguish between different types of refractory carbon particles. VUV-SP-AMS spectra of oxidized organic species adsorbed on absorbing cores are also examined and found to display less thermally induced decomposition and fragmentation than spectra obtained with thermal vaporization at 200 °C (the minimum temperature needed to quantitatively vaporize ambient oxidized organic aerosol with a continuously heated surface). The particle cores tested in these studies include black carbon, silver, gold, and platinum nanoparticles. These results demonstrate that SP vaporization is capable of providing enhanced organic chemical composition information for a wide range of organic coating materials and IR absorbing particle cores. The potential of using this technique to study organic species of interest in seeded laboratory chamber or flow reactor studies is discussed.

Herein, a new fluorescence turn-on chemosensor 2-(4-(1,2,2-triphenylvinyl)phenoxy)acetic acid (TPE-COOH) specific for Al(3+) was presented by combining the aggregation-induced-emission (AIE) effect of tertaphenylethylene and the complexation capability of carboxyl. The introduction of carboxylic group provides the probe with good water-solubility which is important for analyzing biological samples. The recognition toward Al(3+) induced the molecular aggregation and activated the blue fluorescence of the TPE core. The high selectivity of the probe was demonstrated by discriminating Al(3+) over a variety of metal ions in a complex mixture. A detection limit down to 21.6 nM was determined for Al(3+) quantitation. Furthermore, benefiting from its good water solubility and biocompatibility, imaging detection and real-time monitoring of Al(3+) in living HeLa cells were successfully achieved. The AIE effect of the probe enables high signal-to-noise ratio for bioimaging even without multiple washing steps. These superiorities make this probe a great potential for the functional study and analysis of Al(3+) in complex biosystems.

There is a growing acceptance that associations with soil minerals may be the most important overarching stabilization mechanism for soil organic matter. However, direct investigation of organo-mineral associations has been hampered by a lack of methods that can simultaneously characterize organic matter (OM) and soil minerals. In this study, STXM-NEXAFS spectroscopy at the C 1s, Ca 2p, Fe 2p, Al 1s, and Si 1s edges was used to investigate C associations with Ca, Fe, Al, and Si species in soil clay fractions from an upland pasture hillslope. Bulk techniques including C and N NEXAFS, Fe K-edge EXAFS spectroscopy, and XRD were applied to provide additional information. Results demonstrated that C was associated with Ca, Fe, Al, and Si with no separate phase in soil clay particles. In soil clay particles, the pervasive C forms were aromatic C, carboxyl C, and polysaccharides with the relative abundance of carboxyl C and polysaccharides varying spatially at the submicrometer scale. Only limited regions in the soil clay particles had aliphatic C. Good C-Ca spatial correlations were found for soil clay particles with no CaCO3, suggesting a strong role of Ca in organo-mineral assemblage formation. Fe EXAFS showed that about 50% of the total Fe in soils was contained in Fe oxides, whereas Fe-bearing aluminosilicates (vermiculite and Illite) accounted for another 50%. Fe oxides in the soil were mainly crystalline goethite and hematite, with lesser amounts of poorly crystalline ferrihydrite. XRD revealed that soil clay aluminosilicates were hydroxy-interlayered vermiculite, Illite, and kaolinite. C showed similar correlation with Fe to Al and Si, implying a similar association of Fe oxides and aluminosilicates with organic matter in organo-mineral associations. These direct microscopic determinations can help improve understanding of organo-mineral interactions in soils.

A dual-channel sequential injection microchip capillary electrophoresis system with pressure-driven injection is demonstrated for simultaneous separations of anions and cations from a single sample. The poly(methyl methacrylate) (PMMA) microchips feature integral in-plane contactless conductivity detection electrodes. A novel, hydrodynamic "split-injection" method utilizes background electrolyte (BGE) sheathing to gate the sample flows, while control over the injection volume is achieved by balancing hydrodynamic resistances using external hydrodynamic resistors. Injection is realized by a unique flow-through interface, allowing for automated, continuous sampling for sequential injection analysis by microchip electrophoresis. The developed system was very robust, with individual microchips used for up to 2000 analyses with lifetimes limited by irreversible blockages of the microchannels. The unique dual-channel geometry was demonstrated by the simultaneous separation of three cations and three anions in individual microchannels in under 40 s with limits of detection (LODs) ranging from 1.5 to 24 μM. From a series of 100 sequential injections the %RSDs were determined for every fifth run, resulting in %RSDs for migration times that ranged from 0.3 to 0.7 (n = 20) and 2.3 to 4.5 for peak area (n = 20). This system offers low LODs and a high degree of reproducibility and robustness while the hydrodynamic injection eliminates electrokinetic bias during injection, making it attractive for a wide range of rapid, sensitive, and quantitative online analytical applications.

A focused fluorescent probe library for metal cations was developed by combining metal chelators and picolinium/quinolinium moieties as combinatorial blocks connected through a styryl group. Furthermore, metal complexes derived from metal chelators having high binding affinities for metal cations were used to construct a focused probe library for phosphorylated biomolecules. More than 250 fluorescent probes were screened for identifying an ultraselective probe for dTTP.

A chemosensor for the Al(3+) ion, 1-[(3-hydroxypyridin-2-ylamino)methylene]naphthalen-2(1H)-one (H2L), based on inhibited excited-state intramolecular proton transfer was synthesized. The experimental and theoretical calculations at B3LYP+PCM/6-31G(d) revealed that Al(3+) and H2L form a 1:1 complex, [AlL(OH)(H2O)]2, in dimethyl sulfoxide that exhibits two remarkably enhanced fluorescent emissions at 523 and 553 nm. It is confirmed that H2L could be used to detect Al(3+) ions in cells by bioimaging.

High-spin Fe(1+) sites are potentially important in iron-sulfur proteins but are rare in synthetic compounds and unknown in metalloproteins. Here, we demonstrate a spectroscopically characterized example of high-spin non-heme Fe(1+) in a protein environment. Cryoreduction of Fe(2+)-substituted azurin at 77 K with (60)Co γ radiation generates a new species with a S = (3)/2 (high-spin) Fe(1+) center having D > 0 and E/D ~ 0.25. This transient species is stable in a glycerol-water glass only up to ~170 K. A combination of electron paramagnetic resonance and Mössbauer spectroscopies provides a powerful means of identifying a transient high-spin Fe(1+) site in a protein scaffold.

In situ measurements of organic compounds in both gas and particle phases were made with a thermal desorption aerosol gas chromatography (TAG) instrument. The gas/particle partitioning of phthalic acid, pinonaldehyde, and 6,10,14-trimethyl-2-pentadecanone is discussed in detail to explore secondary organic aerosol (SOA) formation mechanisms. Measured fractions in the particle phase (f(part)) of 6,10,14-trimethyl-2-pentadecanone were similar to those expected from the absorptive gas/particle partitioning theory, suggesting that its partitioning is dominated by absorption processes. However, f(part) of phthalic acid and pinonaldehyde were substantially higher than predicted. The formation of low-volatility products from reactions of phthalic acid with ammonia is proposed as one possible mechanism to explain the high f(part) of phthalic acid. The observations of particle-phase pinonaldehyde when inorganic acids were fully neutralized indicate that inorganic acids are not required for the occurrence of reactive uptake of pinonaldehyde on particles. The observed relationship between f(part) of pinonaldehyde and relative humidity suggests that the aerosol water plays a significant role in the formation of particle-phase pinonaldehyde. Our results clearly show it is necessary to include multiple gas/particle partitioning pathways in models to predict SOA and multiple SOA tracers in source apportionment models to reconstruct SOA.

The exponential increase in fossil energy production from Devonian-age shale in the Northeastern United States has highlighted the management challenges for produced waters from hydraulically fractured wells. Confounding these challenges is a scant availability of critical water quality parameters for this wastewater. Chemical analyses of 160 flowback and produced water samples collected from hydraulically fractured Marcellus Shale gas wells in Pennsylvania were correlated with spatial and temporal information to reveal underlying trends. Chloride was used as a reference for the comparison as its concentration varies with time of contact with the shale. Most major cations (i.e., Ca, Mg, Sr) were well-correlated with chloride concentration while barium exhibited strong influence of geographic location (i.e., higher levels in the northeast than in southwest). Comparisons against brines from adjacent formations provide insight into the origin of salinity in produced waters from Marcellus Shale. Major cations exhibited variations that cannot be explained by simple dilution of existing formation brine with the fracturing fluid, especially during the early flowback water production when the composition of the fracturing fluid and solid-liquid interactions influence the quality of the produced water. Water quality analysis in this study may help guide water management strategies for development of unconventional gas resources.

The intensification of agriculture in recent decades has resulted in extremely high nitrogen inputs to ecosystems. One effect has been H(+) release through NH(4)(+) oxidation in soils, which increases rock weathering and leads to acidification processes such as base-cation leaching from the soil exchange complex. This study investigated the evolution of cation concentrations over the past 50 years in rivers from the Armorican crystalline shield (Brittany, western France). On a regional scale, acidification has resulted in increased base-cation riverine exports (Ca(2+), Mg(2+), Na(+), K(+)) correlated with the increased NO(3)(-) concentration. The estimated cation increase is 0.7 mmol(+)/L for Ca(2+) + Mg(2+) and 0.85 mmol(+)/L for total cations. According to mass balance, cation loss represents >30% of the base-cation exchange capacity of soils. Long-term acidification thus contributes to a decline in soil productivity. Estimates of the total organic nitrogen annually produced worldwide indicate that acidification may also constitute an additional carbon source in crystalline catchments if compensated by liming practices.

A Hg(2+) chemodosimeter P3 derived from a perylenebisimide scaffold and thiourea fragments was systematically studied with focus on the photophysical, chemodosimetric mechanistic, as well as fluorogenic behaviors toward various metal cations for the sake of improving selectivity to Hg(2+). As demonstrated, Hg(2+) can promote a stepwise desulfurization and N-acylation of P3 with the help of an acetate anion (OAc(-)), resulting in an N-acylated urea derivative. Interestingly, OAc(-) has the effect of improving the selectivity of P3 to Hg(2+) among other metal ions; that is, in an acetone/Britton-Robinson buffer (9:1, v/v; pH 7.0) upon excitation at 540 nm, the relative fluorescence intensity is increased linearly with increasing concentration of Hg(2+) in the range of 2.5-20 μM with a detection limit of 0.6 μM, whereas the fluorescence intensity of P3 to other metal ions, including Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Fe(2+), Ni(2+), Co(2+), Zn(2+) Ag(+), Cd(2+), Pb(2+), and Cu(2+), is negligible. The fluorescent bioimaging of chemodosimeter P3 to detect Hg(2+) in living cells was also reported.

This work demonstrates that the recognition of cations by molecular switches can give rise to large contrasts of the second-order nonlinear optical (NLO) properties, which can therefore be used as a powerful and multi-usage detection tool. The proof of concept is given by evidencing, by means of ab initio calculations, the ability of spiropyran/merocyanine systems to selectively detect alkali, alkaline earth, and transition-metal cations.

Current practice in chemical hazard ranking and toxic impact assessments is to estimate fate and toxicity assuming the chemical exists in dissolved and particulate phases and, for metals, that all dissolved species are equally bioavailable. This introduces significant error since metal effects are related to the truly dissolved phase and free metal ion within it, not the total dissolved phase. We introduce a Bioavailability Factor (BF) to the calculation of hazard or Comparative Toxicity Potentials (CTPs) (also known as Characterization Factors; CFs) for use in Life Cycle Impact Assessment (LCIA). The method uses for calculation (1) USEtox for environmental fate, (2) WHAM 6.0 for metal partitioning and speciation in aquatic systems, and (3) Biotic Ligand Model (BLM) for average toxicity. For 12 EU water-types, we calculated medians (range) of CTPs of 1.5 x 10(4) (1.5 x 10(2) to 1.2 x 10(5)), 5.6 x 10(4) (9.4 x 10(3) to 4.1 x 10(5)), and 2.1 x 10(4) (7 x 10(3) to 5.8 x 10(4)) day*m(3)/kg for Cu, Ni, and Zn, respectively, which are up to approximately 1000 times lower than previous values. The greatest contributor to variability in CTPs was the BF, followed by toxicity Effect Factor (EF). The importance of the choice of water-type is shown by changes in the relative ranking of CTPs, which are equally influenced by water chemistry and inherent metal-specific differences.

A general theory has been developed for voltammetric ion sensing of cations and anions based on the use of an electrode coated with a membrane containing an electroactive species, an ionophore, and a supporting electrolyte dissolved in a plasticizer. In experimental studies, a membrane coated electrode is fabricated by the drop coating method. In one configuration, a glassy carbon electrode is coated with a poly(vinyl chloride) based membrane, which contains the electroactive species, ionophore, plasticizer and supporting electrolyte. In the case of a cation sensor, ionophore facilitated transfer of the target cation from the aqueous solution to the membrane phase occurs during the course of the reduction of the electroactive species present in the membrane in order to maintain charge neutrality. The formal potential is calculated from the cyclic voltammogram as the average of the reduction and oxidation peak potentials and depends on the identity and concentration of the ion present in the aqueous solution phase. A plot of the formal potential versus the logarithm of the concentration exhibits a close to Nernstian slope of RT/F millivolts per decade change in concentration when the concentration of K(+) and Na(+) is varied over the concentration range of 0.1 mM to 1 M when K(+) or Na(+) ionophores are used in the membrane. The slope is close to RT/2F millivolts for a Ca(2+) voltammetric ion-selective electrode fabricated using a Ca(2+) ionophore. The sensor measurement time is only a few seconds. Voltammetric sensors for K(+), Na(+), and Ca(2+) constructed in this manner exhibit the sensitivity and selectivity required for determination of these ions in environmentally and biologically important matrixes. Analogous principles apply to the fabrication of anion voltammetric sensors.

A boron-dipyrromethene (BODIPY)-based fluorescence probe with a N,N'-(pyridine-2, 6-diylbis(methylene))-dianiline substituent (1) has been prepared by condensation of 2,6-pyridinedicarboxaldehyde with 8-(4-amino)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene and reduction by NaBH(4). The sensing properties of compound 1 toward various metal ions are investigated via fluorometric titration in methanol, which show highly selective fluorescent turn-on response in the presence of Hg(2+) over the other metal ions, such as Li(+), Na(+), K(+), Ca(2+), Mg(2+), Pb(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+), Ag(+), and Mn(2+). Computational approach has been carried out to investigate the mechanism why compound 1 provides different fluorescent signal for Hg(2+) and other ions. Theoretic calculations of the energy levels show that the quenching of the bright green fluorescence of boradiazaindacene fluorophore is due to the reductive photoinduced electron transfer (PET) from the aniline subunit to the excited state of BODIPY fluorophore. In metal complexes, the frontier molecular orbital energy levels changes greatly. Binding Zn(2+) or Cd(2+) ion leads to significant decreasing of both the HOMO and LUMO energy levels of the receptor, thus inhibit the reductive PET process, whereas an oxidative PET from the excited state fluorophore to the receptor occurs, vice versa, which also quenches the fluorescence. However, for 1-Hg(2+) complex, both the reductive and oxidative PETs are prohibited; therefore, strong fluorescence emission from the fluorophore can be observed experimentally. The agreement of the experimental results and theoretic calculations suggests that our calculation method can be applicable as guidance for the design of new chemosensors for other metal ions.

The focus of this study was to demonstrate that, in the luminescent sensors, the signal transduction may possibly be the most important part in the sensing process. Rational design of fluorescent sensor arrays for cations utilizing extended conjugated chromophores attached to 8-hydroxyquinoline is reported. All of the optical sensors utilized in the arrays comprise the same 8-hydroxyquinoline (8-HQ) receptor and various conjugated chromophores to yield a different response to various metal cations. This is because the conjugated chromophores attached to the receptor are partially quenched in their resting state, and upon the cation coordination by the 8-HQ, the resulting metalloquinolinolate complex displays a change in fluorescence. A delicate balance of conjugation, fluorescence enhancement, energy transfer, and a heavy metal quenching effect results in a fingerprint-like pattern of responses for each sensor-cation complex. Principal component analysis (PCA) and linear discriminant analysis (LDA) are used to demonstrate the contribution of individual sensors within the array, information that may be used to design sensor arrays with the smallest number of sensor elements. This approach allows discriminating between 10 cations by as few as two or even one sensor element. Examples of arrays comprising various numbers of sensor elements and their utility in qualitative identification of Ca(2+), Mg(2+), Cd(2+), Hg(2+), Co(2+), Zn(2+), Cu(2+), Ni(2+), Al(3+), and Ga(3+) ions are presented. A two-member array was found to identify 11 analytes with 100% accuracy. Also the best two of the sensors were tested alone and both were found to be able to discriminate among the samples with 99% and 96% accuracy, respectively. To illustrate the utility of this approach to a real-world application, identification of enhanced soft drinks based on their Ca(2+), Mg(2+), and Zn(2+) cation content was performed. The same approach to reducing array elements was used to construct three- and two-member arrays capable of identifying these complex analytes with 100% accuracy.

Recovery of streamwater acid neutralizing capacity (ANC) resulting from declines in regional acid deposition was examined using contemporary (1990-2005) data from two long-term monitoring stations located on the Appalachian Plateau in western Maryland, U.S. Two computational methods were used to estimate daily, monthly, and annual fluxes and discharge-weighted concentrations of ANC, sulfate, nitrate, and base cations over the period of record, and two statistical methods were used to evaluate long-term trends in fluxes and concentrations. The methods used to estimate concentrations, as well as the statistical techniques, produced very similar results, underlining the robustness of the identified trends. We found clear evidence that streamwater sulfate concentrations have declined at an average rate of about 3 microeq L(-1) yr(-1) at the two sites due to a 34% reduction in wet atmospheric sulfur deposition. Trends in nitrate concentrations appear to be related to other watershed factors, especially forest disturbance. The best evidence of recovery is based on a doubling of ANC (from 21 to 42 microeq L(-1)) at the more acid-sensitive site over the 16-year period. A slowing, or possible reversal, in the sulfate, nitrate, and SBC trends is evident in our data and may portend a decline in the rate of--or end to--further recovery.

A novel type of self-plasticizing polyacrylate-based membrane was developed for all-solid-state ion-selective potentiometric electrodes. The membrane composition contains a conducting polymer (CP): poly(3,4-ethylenedioxythiophene) end capped with methacrylate groups, chemically grafted with the membrane during the photopolymerization step. This composition results in ion-selective membranes with the following advantages: lower electrical resistance compared to the CP-free membrane, facile ion-to-electron transduction between the membrane and the electrode support, controlled low activity of analyte ions, and high concentration of interferent ions (incorporated with the CP) within the membrane, potentially resulting in improved analytical parameters. Ca2+- and K+-selective membranes were chosen as model systems to study the effect of pretreatment and CP content on the potentiometric sensor's characteristics. For Ca2+ sensors, reproducible and stable Nernstian characteristics were obtained within the range from 0.1 to 10(-9) M CaCl2, without a time-consuming preconditioning step. For K+-selective sensors, the influence on Nernstian response range was observed for varying KCl concentrations in the conditioning solution, with the lowest detection limit found close to 10(-8) M KCl. Mass spectrometry coupled with laser ablation studies of the membranes revealed that in this case the detection limit is not related to primary ion content in the membrane contacting a sample solution, but is affected by interfering ion concentration close to the membrane surface.

A fluorogenic derivative of 1,3-alternate calix[4]arenebis(crown-6) (1) containing a dansyl group in the proton-ionizable side arm has been employed in selective sensing of Tl+ and Cs+ at low concentration levels in MeCN-H2O (1:1) mixed solvent. Optical recognition of these two metal cations by 1 occurs in contrasting modes. On the basis of the results of fluorescence, matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS), and 1H NMR studies, Tl+ and Cs+ react with 1 via formation of 1:1 complexes that differ in coordination arrangement around the metal ion.

Since lithium salts are used as pharmaceutically active compounds against manic-depressive psychosis, there is a demand to monitor the lithium concentration in blood in the narrow range of 0.6-1.2 mM effectively and safely. Here we report on an optical sensor approach for the determination of Li+, based on the design and synthesis of a novel lithium fluoroionophore KLI-1 and its polymer immobilizable derivative KLI-2, and the application to an optode. The novel lithium fluoroionophores rely on a tetramethyl "blocking subunit" bearing 14-crown-4 as a Li+-selective binding site and 4-methylcoumarin as a fluorophore, intramolecularly connected to show ICT-type wavelength shift for ratiometric fluorescence measurements. The fluoroionophores showed high selectivity for Li+ with binding-induced blue shift in the fluorescence spectra, no response to major biological interfering cations (K+, Ca2+, Mg2+), a selectivity of log kLi+,Na+ = -2.4 over Na+ in solution, and no response to pH in the range of pH 3-10. A hydrophilic optode membrane with KLI-2 immobilized also showed good selectivity for Li+, pH independence in the physiological range (pH 6-8), and fully reversible signal changes. KLI-1 and KLI-2 are excellent Li+ fluorescent chemosensors that can be applied to quantitative measurements of lithium in clinical samples, although possible interference from Na+ has to be considered at the lower therapeutic level of Li+.

The characteristics as a chemosensor of the compound 3-methyl-6,8-di(2-pyridyl)-[1,2,3]triazolo[5',1':6,1]pyrido[2,3-]pyrimidine (1) have been analyzed. Interaction with Cu(2+) produces a quenching of the fluorescence, while interaction with Zn(2+) leads to a quenching of the fluorescence followed by a bathochromic shift. The crystal structure of the Zn(1)(H(2)O)(3)(ClO(4))(2) x H(2)O complex shows the coordination of Zn(2+) through the terpyridine moiety. The octahedral site is completed by three water molecules. Interactions of the Zn(2+) complex with the anions sulfate, nitrate, nitrite, and dihydrogenphosphate in ethanol produce hypsochromic shifts and restoration of the fluorescence whose magnitude depends on the anion involved. The maximum interaction is observed for H(2)PO(4)(-). Interactions of the Zn(2+) complex with the amino acids l-aspartate and l-glutamate have also been explored showing a higher interaction with l-aspartate.

Positive and negative ions produced from matrix-assisted laser desorption/ionization (MALDI) were simultaneously measured using a newly developed dual-polarity time-of-flight mass spectrometer. This instrument is effective not only for express and comprehensive mass analysis but also for studying the ionization mechanisms of biomolecules. It comprises two identical time-of-flight mass analyzers located symmetrically about a MALDI ion source. The ion optics are arranged to be able to extract positive and negative ions synchronously with equal efficiency to each corresponding mass analyzer. Mass spectra of various proteins with molecular weights as large as that of myoglobin monomer and dimer were obtained. The spectral patterns obtained in this work are approximately mirror images with opposite polarities.

A polymer-based fluorescence "turn-on" chemosensor is demonstrated with high sensitivity and selectivity toward Fe2+ cations. This system is an inorganic/organic hybrid system in which Cu2+ is coordinated at the receptor site of a conjugated polymer sensor. The unique quenching behavior of the Cu2+ toward this conjugated polymer was used to lower the initial fluorescence intensity of the sensory system. This results in a highly sensitive and also selective sensory system toward Fe2+ as compared to other related divalent transition-metal cations in solution.

A series of poly[p-(phenyleneethynylene)-alt-(thienyleneethynylene)] (PPETE) polymers with variable percent loadings of the N,N,N'-trimethylethylenediamino group on the polymer backbone were synthesized and fully characterized. Photophysical studies show that changes in the loading of the amino group receptor on the backbone do not affect the polymer electronic structure in either the ground or excited states. The fluorescence quantum yields were found to be directly related to the loading of the amino groups and can be modeled by a Stern-Volmer type relationship. Photophysical studies related the total quenching efficiency to the inherent rate of photoinduced electron transfer (PET), the lifetime of the exciton, the rate of excitation energy migration along the polymer backbone, and the total loading of the receptor on the polymer. The role of the loading dependence on the application of these polymers as fluorescence "turn-on" sensors for toxic metal cations in dilute solution was also studied. Results showed that the fluorescence enhancement upon binding various cations was maintained even when the amino receptor loading along the polymer backbone was reduced.

In a previous study, a rapid acidification of soil solution was observed between 1987 and 1997 in a cryptopodzolic soil in southern Switzerland despite a reduction in acidic deposition. The molar ratio of base nutrient cations to aluminum (BC/Al) in the soil solution was used to assess acidification. The monitoring of the soil solution chemistry was continued at the same site between 1998 and 2003 to find out how long the delay in reaction to reduced deposition would last and whether the BC/Al ratios would recover. The reevaluation of all data collected during the 16-year observation period showed no clear improvement in the BC/Al ratios, except below the litter layer where the ratios greatly increased after 1998. Initial signs of recovery were also detected in the mineral horizons, the ratios stabilizing in the second part of the observation period. Sulfate concentrations decreased significantly below the litter mat in response to decreased S deposition. BC concentrations markedly declined below the litter layer and in the mineral horizons, which was attributed to the depletion of the BC exchangeable pool as a result of continued acidic deposition.

A single sonic spray source has been used to generate both positive and negative ions for subsequent ion/ion reaction experiments. Ion/ion reactions took place after ions of each polarity were sequentially injected into a linear ion trap, where axial trapping was effected by applying an auxiliary radio frequency voltage to one end lens. Absolute charge reductions via proton transfer were demonstrated for multiply charged protein/peptide cations and multiply charged oligonucleotide anions. Deprotonation of polypeptide cations occurs with anions derived from fluorinated compounds such as nonadecafluoro-1-decanol and perfluoro-1-octanol, while multiply charged oligonucleotide anions are efficiently protonated via reaction with proton sponge (N,N,N',N'-tetramethyl-1,8-naphthalenediamine) cations. No evidence for signal suppression of the biopolymer ions was noted to result from the presence of these reagents in the solution subjected to sonic spray. Several of the analytically useful applications of ion/ion proton-transfer reactions are demonstrated using a single sonic spray ion source. These include an ion parking experiment for the purpose of gas-phase ion concentration and charge-state reduction of product ions formed via beam-type and in-trap collision-induced dissociation of multiply charged oligonucleotide parent anions. Examples of complex formation are also given to illustrate the flexibility of the sonic spray-induced ion/ion reaction method.

High rates of acidic deposition in the Adirondack region of New York have accelerated acidification of soils and surface waters. Annual input-output budgets for major solutes and acid-neutralizing capacity (ANC) were estimated for 43 drainage lake-watersheds in the Adirondacks from 1998 to 2000. Sulfate was the predominant anion on an equivalent basis in both precipitation and drainage export. Calcium ion had the largest cation drainage export, followed by Mg2+. While these watersheds showed net nitrogen (N) retention, the drainage losses of SO4(2-), Cl-, base cations, and ANC exceeded their respective inputs from precipitation. Land cover (forest type and wetlands) affected the export of SO4(2-), N solutes, and dissolved organic carbon (DOC). The relationships of solute export with elevation (negative for base cations and Cl-, positive for NO3- and H+) suggest the importance of the concomitant changes of biotic and abiotic watershed characteristics associated with elevational gradients. The surface water ANC increased with the sum of base cations and was greatest in the lakes with watersheds characterized by thick deposits of glacial till. The surface water ANC was also higher in the lake-watersheds with lower DOC export. Some variation in lake ANC was associated with variability in acidic deposition. Using a classification system previously developed for Adirondack lakes on the basis primarily of surficial geology, lake-watersheds were grouped into five classes. The calculated ANC fluxes based on the major sinks and sources of ANC were comparable with measured ANC for the thick-till (I) and the medium-till lake-watersheds with low DOC (II). The calculated ANC was overestimated for the medium-till with high DOC (III) and the thin-till with high DOC (V) lake-watersheds, suggesting the importance of naturally occurring organic acids as an ANC sink, which was not included in the calculations. The lower calculated estimates than the measured ANC for the thin-till lake-watersheds with low DOC (IV) were probably due to the mobilization of Al as an ANC source in these watersheds that were highly sensitive to strong acid inputs. Our analysis of various drainage lakes across the Adirondacks on the basis of solute mass balances, coupled with the use of a lake classification system and GIS data, demonstrates that the lake-watersheds characterized by shallow deposits of glacial till are highly sensitive to acidic deposition not only in the southwestern Adirondack region where previous field-based studies were intensively conducted but also across the entire Adirondack region. Moreover, the supply of organic acids and Al mobilization substantially modify the acid-base status of surface waters.

Addition of ion complexation ligands in the acceptor solution in the Donnan membrane technique (DMT) can lower its detection limit for free metal ion concentration in natural samples. In this paper, the influence of added ligands on the transport behavior of trace ions in DMT was studied using numerical and analytical models and experimental tests. The results show that addition of ligands in the acceptor can significantly influence the time to reach the Donnan membrane equilibrium. Depending on several factors, the flux can be controlled by the diffusion in the stagnant solution film at the solution-membrane interface, by the diffusion in the membrane, or by both. The conditions under which the diffusion in the solution film or in the membrane becomes the rate-limiting step are discussed and approximate analytical solutions for some special cases are presented. Very low concentrations of free metal ion can be measured using the ligand complexation DMT. Depending on the degree of complexation in the sample, the measurement can be based on either the Donnan membrane equilibrium (when the complexation degree is low) or the kinetic interpretation of the ion transport (when the complexation degree is high).

We developed a computational technique to assist in the large-scale identification of charged metabolites. The electrophoretic mobility of metabolites in capillary electrophoresis-mass spectrometry (CE-MS) was predicted from their structure, using an ensemble of artificial neural networks (ANNs). Comparison between relative migration times of 241 various cations measured by CE-MS and predicted by a trained ANN ensemble produced a correlation coefficient of 0.931. When we used our technique to characterize all metabolites listed in the KEGG ligand database, the correct compounds among the top three candidates were predicted in 78.0% of cases. We suggest that this approach can be used for the prediction of the migration time of any cation and that it represents a powerful method for the identification of uncharacterized CE-MS peaks in metabolome analysis.

The biotic ligand model (BLM) is a mechanistic approach that greatly improves our ability to generate site-specific ambient water quality criteria (AWQC)for metals in the natural environment relative to conventional relationships based only on hardness. The model is flexible; all aspects of water chemistry that affect toxicity can be included, so the BLM integrates the concept of bioavailability into AWQC--in essence the computational equivalent of water effect ratio (WER) testing. The theory of the BLM evolved from the gill surface interaction model (GSIM) and the free ion activity model (FIAM). Using an equilibrium geochemical modeling framework, the BLM incorporates the competition of the free metal ion with other naturally occurring cations (e.g., Ca2+, Na+, Mg2-, H+), togetherwith complexation by abiotic ligands [e.g., DOM (dissolved organic matter), chloride, carbonates, sulfide] for binding with the biotic ligand, the site of toxic action on the organism. On the basis of fish gill research, the biotic ligands appear to be active ion uptake pathways (e.g., Na+ transporters for copper and silver, Ca2+ transporters for zinc, cadmium, lead, and cobalt), whose geochemical characteristics (affinity = log K, capacity = Bmax) can be quantified in short-term (3-24 h) in vivo gill binding tests. In general, the greater the toxicity of a particular metal, the higher the log K. The BLM quantitatively relates short-term binding to acute toxicity, with the LA50 (lethal accumulation) being predictive of the LC50 (generally 96 h for fish, 48 h for daphnids). We critically evaluate currently available BLMs for copper, silver, zinc, and nickel and gill binding approaches for cadmium, lead, and cobalt on which BLMs could be based. Most BLMs originate from tests with fish and have been recalibrated for more sensitive daphnids by adjustment of LA50 so as to fit the results of toxicity testing. Issues of concern include the arbitrary nature of LA50 adjustments; possible mechanistic differences between daphnids and fish that may alter log K values, particularly for hardness cations (Ca2+, Mg2+); assumption of fixed biotic ligand characteristics in the face of evidence that they may change in response to acclimation and diet; difficulties in dealing with DOM and incorporating its heterogeneity into the modeling framework; and the paucity of validation exercises on natural water data sets. Important needs include characterization of biotic ligand properties at the molecular level; development of in vitro BLMs, extension of the BLM approach to a wider range of organisms, to the estuarine and marine environment, and to deal with metal mixtures; and further development of BLM frameworks to predict chronic toxicity and thereby generate chronic AWQC.

A microfabricated drift tube for differential mobility spectrometry (DMS) was used with pyrolysis-gas chromatography (py-GC) to chemically characterize bacteria through three-dimensional plots of ion intensity, compensation voltage from differential mobility spectra, and chromatographic retention time. The DMS analyzer provided chemical information for positive and negative ions simultaneously from chemical reactions between pyrolysis products in the GC effluent and reactant ions of H+(H2O)n and O2-(H2O)n in air at ambient pressure. Authentic standards for chemicals formed in the pyrolysis of bacteria showed favorable matches with plots from py-GC/DMS analysis and were supported by py-GC/MS results. These and other yet-unidentified constituents provided a means to distinguish Escherichia coli from Micrococcus luteus. A Gram-positive spore former (Bacillus megaterium) was distinguished by an abundant peak for crotonic acid evident in positive and negative ions and not observed with M. luteus. In contrast, plots from py-GC/DMS of lipid A and lipoteichoic acid showed poor matches to plots for a Gram-negative (E. coli) bacterium and a Gram-positive (M. luteus) bacterium and the differences were attributed to differences in genus sources of the biopolymers. A significant percentage of the chemical information available in py-GC/DMS is unidentified, and the analytical utility must be established. Precision in the chemical measurement was determined as +/- 0.2 V, 10% relative standard deviation (RSD), and +/- 0.05 min for compensation voltage, peak intensity, and retention time, respectively. The minimum number of total bacteria (cell forming units) detected was 6000 though detection limits and resolution could be varied by the magnitude of the separation voltage in the differential mobility spectrometer., (Copyright 2004 American Chemical Society)

The use of a guanosine gel as a chiral selector in capillary electrophoresis is introduced. Guanosine gels are reversible organized media that are formed through the self-association of guanosine compounds. Their degree of organization and their physicochemical properties can be modulated through variations in guanosine monomer concentration, pH, temperature, and cation content. Baseline resolution of the d and l enantiomers of propranolol was achieved using a reversible biogel formed by 5'-guanosine monophosphate as the run buffer in capillary electrophoresis. Conditions were optimized to provide enantiomeric resolution of 2.1-2.3 in less than 5 min. The reversibility of the gel network offers potential advantages for chiral separations, including the possibility of using thermal or chemical dissociation of the gel network to remove the nucleoside monomers from the separated enantiomers, thereby eliminating the chiral selector as a source of physical contamination of the enantiomerically pure products and spectral background in UV absorbance detection.

A rapid method is described for the quantitative analysis of anionic, cationic, and nonionic surfactants in water samples by flow injection analysis coupled to electrospray ionization mass spectrometry (FIA/ESI-MS). All surfactants were isolated by liquid-liquid extraction and quantified using labeled triethoxylated nonylphenol ([13C6]-NP3EO) and sodium dibutylnaphthalenesulfonate as internal standards. FIA/ESI-MS was performed by alternating both positive and negative ionization modes, which allows simultaneous analysis of most common surfactants in a short time. Quality parameters of the method, such as linear range, repeatability, reproducibility, and limits of detection were studied. This method was applied to the analysis of wastewater treatment plant effluents from Catalonia (NE Spain).

A new approach for the comprehensive and quantitative analysis of charged metabolites by capillary electrophoresis mass spectrometry (CE-MS) is proposed. Metabolites are first separated by CE based on charge and size and then selectively detected using MS by monitoring over a large range of m/z values. This method enabled the determination of 352 metabolic standards and its utility was demonstrated in the analysis of 1692 metabolites from Bacillus subtilis extracts, revealing significant changes in metabolites during B. subtilis sporulation.

This paper presents the development and characterization of a highly selective magnesium fluorescent optical nanosensor, made possible by PEBBLE (probe encapsulated by biologically localized embedding) technology. A ratiometric sensor has been developed by co-immobilizing a dye that is sensitive to and highly selective for magnesium, with a reference dye in a matrix. The sensors are prepared via a microemulsion polymerization process, which entraps the sensing components inside a polymer matrix. The resultant spherical sensors are approximately 40 nm in diameter. The Coumarin 343 (C343) dye, which by itself does not enter the cell, when immobilized in a PEBBLE is used as the magnesium-selective agent that provides the high and necessary selectivity over other intracellular ions, such as Ca2+, Na+, and K+. The dynamic range of these sensors was 1-30 mM, with a linear range from 1 to 10 mM, with a response time of <4 s. In contrast to free dye, these nano-optodes are not perturbed by proteins. They are fully reversible and exhibit minimal leaching and photobleaching over extended periods of time. In vitro intracellular changes in Mg2+ concentration were monitored in C6 glioma cells, which remained viable after PEBBLE delivery via gene gun injection. The selectivity for Mg2+ along with the biocompatibility of the matrix provides a new and reliable tool for intracellular magnesium measurements.

Long-term changes in the chemistry of wet deposition and lake water were investigated in the Adirondack Region of New York. Marked decreases in concentrations of SO4(2-) and H+ in wet deposition have occurred at two sites since the late 1970s. These decreases are consistent with long-term declines in emissions of sulfur dioxide (SO2) in the eastern United States. Changes in wet NO3- deposition and nitrogen oxides (NOx) emissions have been minor over the same interval. Virtually all Adirondack Lakes have shown marked decreases in concentrations of SO4(2-), which coincide with decreases in atmospheric S deposition. Concentrations of NO3- have also decreased in several Adirondack lakes. As atmospheric N deposition has not changed over this period, the mechanism contributing to this apparent increase in lake/watershed N retention is not evident. Decreases in concentrations of SO4(2-) + NO3- have resulted in increases in acid-neutralizing capacity (ANC) and pH and resulted in a shift in the speciation of monomeric Al from toxic inorganic species toward less toxic organic forms in some lakes. Nevertheless, many lakes continue to exhibit pH values and concentrations of inorganic monomeric Al that are critical to aquatic biota. Extrapolation of rates of ANC increase suggests that the time frame of chemical recovery of Adirondack Lakes will be several decades if current decreases in acidic deposition are maintained.

A new class of fluorescence sensors for ammonium and organoammonium ions has been disclosed. One of the sensors, an alaninol-derived tripodal oxazoline (1a) shows significant fluorescence enhancement upon binding NH(4)(+) but little response toward K(+), Na(+), and Mg(2+) ions. Owing to its chiral environment, a phenylglycinol-derived tripodal oxazoline (1b) shows chiral discrimination in fluorescence upon binding enantiomeric guests. [reaction: see text]

A modular technique was used to synthesize an ammonium-selective ionophore based on a cyclic depsipeptide structure. The ionophore was incorporated into a planar ion-selective electrode sensor format and the selectivity tested versus a range of metal cations in a commercial clinical diagnostic "point-of-care" instrument. Four sensor membrane formulations were tested, all of which consisted of plasticized PVC. Formulations differed as to the type of plasticizer used and whether an ionic additive was present. It was found that the membrane containing the polar plasticizer nitrophenyl octyl ether in the absence of ionic additive exhibited near-Nernstian behavior (slope, 60.1 mV/decade at 37 degrees C) and possessed high selectivity for ammonium ion over lithium and the divalent cations, calcium and magnesium (log K(POT)NH4+(j) = -7.3, -4.4, and -7.1 for lithium, calcium, and magnesium ions, respectively). The same membrane also exhibited sodium and potassium selectivity that was comparable to that reported for nonactin (log K(POT)NH4+(j) = -2.1 and -0.6 for sodium and potassium, respectively, compared to -2.4 and -0.9 in the case of nonactin). Membranes containing the less polar plasticizer, dioctyl phthalate, showed sub-Nernstian behavior (slope, <50 mV/decade at 37 degrees C). In all cases, the presence of the ionic additive potassium tetrakis(4-chlorophenyl)borate substantially reduced the selectivity observed. The flexible modular synthetic technique developed and reported here will allow the cyclic depsipeptide structure to be tuned for optimum selectivity.

[reaction: see text] Bright green boradiazaindacene fluorescence is quenched by an oxidative photoinduced electron transfer (PET) from the excited state fluorophore to the bipyridyl unit complexed to metal cations. The closed shell diamagnetic cation Zn(II) is one of the most effective quenchers of fluorescence in this system, demonstrating that the quenching is not simply related to the facilitated intersystem crossing. The molecule also acts as a NOR logic gate with two chemical inputs, TFA and Zn(II).

[structure: see text] Tetrathiafulvalene redox-responsive ligands devoid of cis/trans isomerism containing the electroactive bis(pyrrolo[3,4-d])tetrathiafulvalene moiety and polyether subunits have been synthesized. One ligand exhibits high binding affinities for Pb2+ and Ba2+ cations as shown by independent methods (1H NMR, UV-vis spectroscopy, and cyclic voltammetry). The ability of this receptor to electrochemically recognize Pb2+ and Ba2+ is shown by cyclic voltammetry.

[structure: see text] A new type of donor-spacer-acceptor podand system has been synthesized and proved as an efficient dual channel fluorosensor for Li+, Mg2+, and Ca2+. The known ability for the N-oxide function to bind Lewis acids is the key step in the appearance of a new emitting charge-transfer (CT) excited state. The occurrence of this CT state for alkaline earth (Mg2+ and Ca2+) and not for alkaline metals (Li+) provided a new type of dual channel fluorosensors.