Search

Considering the pivotal role of interfaces in controlling the performance of organic electronic devices, implications of metal/organic interfacial quality in a Schottky barrier diode (SBD) are investigated. The nature of metal/organic interfaces and the thin film quality of regioregular poly (3-hexylthiophene) based SBDs fabricated in different device architectures are investigated using experimental and theoretical modeling. The importance of oxidized aluminum nanostructures as an interlayer at the Schottky interface for the dramatic enhancement of the rectification ratio (>106 at ±5 V) has been demonstrated, which is attributed to suppressed leakage current due to the oxide layer and the formation of a charge double layer. Furthermore, electrical performances of all the SBDs were modeled in terms of an underlying particular phenomenon solely or with the combination of multiple physical phenomena. The combined modeling equation used in this work fits well for the different device architectures, which validates its generality in order to extract the device parameters.

We report C60 thin-film transistor characteristics of top-contact structure with low work-function source and drain electrodes. The electron mobility of the Mg electrode device is one order of magnitude higher than that of the Ag electrode device. The depth profile obtained by using secondary-ion mass spectroscopy demonstrates that Mg atoms strongly diffuse into C60 film during Mg deposition. These findings indicate that the improved mobility is due to the reduction of the parasitic resistance under source and drain electrodes by the Mg doping effect.

A comparative study on electrical performance, optical properties, and surface morphology of poly(3-hexylthiophene) (P3HT) and P3HT-nanofibers based “normally on” type p-channel field effect transistors (FETs), fabricated by two different coating techniques has been reported here. Nanofibers are prepared in the laboratory with the approach of self-assembly of P3HT molecules into nanofibers in an appropriate solvent. P3HT (0.3 wt. %) and P3HT-nanofibers (∼0.25 wt. %) are used as semiconductor transport materials for deposition over FETs channel through spin coating as well as through our recently developed floating film transfer method (FTM). FETs fabricated using FTM show superior performance compared to spin coated devices; however, the mobility of FTM films based FETs is comparable to the mobility of spin coated one. The devices based on P3HT-nanofibers (using both the techniques) show much better performance in comparison to P3HT FETs. The best performance among all the fabricated organic field effect transistors are observed for FTM coated P3HT-nanofibers FETs. This improved performance of nanofiber-FETs is due to ordering of fibers and also due to the fact that fibers offer excellent charge transport facility because of point to point transmission. The optical properties and structural morphologies (P3HT and P3HT-nanofibers) are studied using UV-visible absorption spectrophotometer and atomic force microscopy , respectively. Coating techniques and effect of fiber formation for organic conductors give information for fabrication of organic devices with improved performance.

We report the performance of solution-processed n-type organic thin-film transistors (OTFTs) based on C60 derivatives. Long-chain alkyl-substituted C60, C60-fused N-methylpyrrolidine-meta-C12 phenyl (C60MC12), was used as a semiconducting layer. The C60MC12-thin-film transistor shows high electron mobility of 0.067 cm2/V s in saturation regime. From the result of x-ray diffraction analysis, the C60MC12 active layer forms highly ordered crystalline film. We found that self-assemble ability of long alkyl chains plays an important role for fabrication of highly ordered crystalline film, leading to achievement of high electron mobility in solution-processed n-type OTFTs.