Search

Optical transition edge sensor (TES) detectors that can resolve the energy of a single optical photon have proven to be desirable in multicolor fluorescence microscopy. Here, detectors with a higher energy resolution can distinguish dyes having similar or closer emission wavelengths, thus enabling the observation of multiple kinds of dyes simultaneously. To improve energy resolution, it is necessary to know how different the measured energy resolution is from the limit determined by the temperature sensitivity αI and current sensitivity βI, as extracted from the complex impedance. Due to the very fast response of an optical TES (the time constant is shorter than 1 µs), the complex impedance must be measured up to frequencies larger than 10 MHz. However, at high frequencies, the parasitic impedance in the circuit and reflections of electrical signals caused by discontinuities in the characteristic impedance of the readout circuits become significant. To reduce these effects, twisted pair cables are replaced with coaxial ones in this work; thus, a cleaner transfer function of the readout at high frequencies is obtained. The measured impedance of the studied TES is consistent with that given by the single-block model.

White noise of dissipationless microwave radio frequency superconducting quantum interference device (RF-SQUID) multiplexers has been experimentally studied to evaluate their readout performance for transition edge sensor (TES) photon counters ranging from near infrared to gamma ray. The characterization has been carried out at 4 K, first to avoid the low-frequency fluctuations present at around 0.1 K, and second, for a feasibility study of readout operation at 4 K for extended applications. To increase the resonant Q at 4 K and maintain low noise SQUID operation, multiplexer chips consisting of niobium nitride (NbN)-based coplanar-waveguide resonators and niobium (Nb)-based RF-SQUIDs have been developed. This hybrid multiplexer exhibited 1 × 104 ≤ Q ≤ 2 × 104 and the square root of spectral density of current noise referred to the SQUID input √SI = 31 pA/√Hz. The former and the latter are factor-of-five and seven improvements from our previous results on Nb-based resonators, respectively. Two-directional...

A highly sensitive calorimeter has been developed for measuring the absolute energy of single laser pulses. The calorimeter, which consists of a solid volume absorber, a copper absorption cavity, and bismuth telluride thermocouples, is operated at room temperature with no vacuum window. The absorption of the laser energy in the calorimeter leads to a temperature increase of the cavity. The time-dependent temporal temperature change was measured as voltage signals with highly sensitive bismuth telluride semiconductor thermocouples. The calorimeter was calibrated by injecting a known Joule heat with a heater on the cavity. The experimental results showed a linear relationship in an energy range from 5to100mJ. The standard deviation of the calibrated sensitivity was less than 0.1%. The systematic errors of the laser energy measurement are estimated to be as small as 0.32%.