Search

This paper describes the implementation of a scalable SiGe FPGA that serves as a high speed FPGA test platform. A new configurable block (Basic Cell) has been evolved from the Xilinx 6200 specification, and is designed to perform in the gigahertz range. Two chips, a 4:1 multiplexer and 1:4 demultiplexer, were designed using the IBM SiGe 7HP process. The two designs can process 10 Gbps data streams.

A high speed, low power FPGA design is presented in this paper. This gigahertz FPGA design has an improved XC6200 structure. Redundant multiplexers are eliminated from critical signal path to enhance the performance of the previous design. By balancing between the power consumption and performance, the simulated clock rate is from 5 GHz to 20 GHz and the power consumption is from 4 mW to 12 mW per single cell in the IBM 7HP SiGe HBT BiCMOS process.

This paper presents a new power saving, high speed FPGA design enhancing a previous SiGe CML FPGA based on the Xilinx 6200 FPGA. The design aims at having a higher performance but minimizing power consumption. The new SiGe process has traded off the circuit's performance for reduced power consumption. The power supply voltage has been reduced from 3.4 V to 2.0 V. The structure of the Basic Cell, including the Configurable Logic Block (CLB) and routing multiplexers (MUXs), has been modified so that the supply voltage reduction can be attained. Simulations have shown that the gate delay of the new Basic Cell is reduced from 130 ps in the prior design to 51 ps. The total power consumption for each Basic Cell has been reduced 94% from 71 mW to 4.2 mW, making a large scale FPGA feasible. This design is currently under fabrication for testing.

The low operating speed of current CMOS Field Programmable Gate Arrays (FPGAs), i.e., 10-220 MHz, has prevented their use in high-speed digital applications. With the advent of IBM Silicon Germanium (SiGe) 7HP technology, designers have been able to design FPGAs operating in the gigahertz range. This paper is going to elaborate on the implementation of a 4-bit ripple-carry full adder (FA) on the new SiGe FPGA with new architectures and a novel power management strategy. The 1-bit FA can be realized in three Configurable Logic Blocks (CLBs). Apart from these, the FA can operate in multiple modes: FAST, NON-CRITICAL, SLOW and OFF. The propagation delays of the 1-bit FA and 4-bit ripple-carry FA are 240 ps and 675 ps respectively in the FAST mode. All the simulation and layouts were done using Cadence 4.4.6 and IBM SiGe 7HP design kit version 1.1.1.0.