Search

The cigarette filter coated stainless steel meshes could be applied to on-demand separation of immiscible oil/water mixtures and emulsions with high efficiency. The rapid industrial growth and the frequent oil spill accidents have led to the large production of oily wastewater. Thus, it is urging to develop a low-cost and eco-friendly material to purify the oily wastewater. In our work, the waste cigarette filter as the raw material was used to prepare cigarette filter coated meshes (CFCMs) by a facile electrospinning approach. The as-prepared CFCMs prewetted with water or oil achieved the special wetting performance of underwater superoleophobicity or underoil superhydrophobicity without any further chemical modification. Hence, the cigarette filter coated meshes with larger or smaller pore size can be applied to on-demand immiscible oil/water mixtures (light or heavy oil/water mixtures) and oil/water emulsions separation (water-in-oil or oil-in-water emulsions), respectively. Moreover, the CFCMs still exhibited high separation efficiency larger than 99.9% for immiscible oil/water mixtures and emulsions after many cyclic testing. The work provides an application in oil/water separation for waste cigarette filters and contributes to reduce the pollution for environment from the waste cigarette filters. [ABSTRACT FROM AUTHOR]

Abstract: Epigallocatechin-3-gallate (EGCG), the major polyphenolic component of green tea, has been demonstrated to possess anti-inflammatory, antioxidant, anti-mutagenic and anti-carcinogenic properties. The anti-melanoma effect of EGCG has been previously suggested, but no clear mechanism of action has been established. In this study, we demonstrated that EGCG inhibits melanoma cell growth at physiological doses (0.1–1μM). In the search for mechanisms of EGCG-mediated melanoma cell suppression, we found that NF-κB was inhibited, and that reduced NF-κB activity was associated with decreased IL-1β secretion from melanoma cells. Since inflammasomes are involved in IL-1β secretion, we investigated whether IL-1β suppression was mediated by inflammasomes, and found that EGCG treatment led to downregulation of the inflammasome component, NLRP1, and reduced caspase-1 activation. Furthermore, silencing the expression of NLRP1 abolished EGCG-induced inhibition of tumor cell proliferation both in vitro and in vivo, suggesting a key role of inflammasomes in EGCG efficacy. This paper provides a novel mechanism for EGCG-induced melanoma inhibition: inflammasome downregulation→decreased IL-1β secretion→decreased NF-κB activities→decreased cell growth. In addition, it suggests inflammasomes and IL-1β could be potential targets for future melanoma therapeutics. [Copyright &y& Elsevier]

Abstract: Nature is the creation of aesthetic functional systems, in which many natural materials have vagarious structures. Inspired from nature, such as lotus leaf, butterfly’ wings, showing excellent superhydrophobicity, scientists have recently fabricated a lot of biomimetic superhydrophobic surfaces by virtue of various smart and easy routes. Whilst, many examples, such as lotus effect, clearly tell us that biomimicry is dissimilar to a simple copying or duplicating of biological structures. In this feature article, we review the recent studies in both natural superhydrophobic surfaces and biomimetic superhydrophobic surfaces, and highlight some of the recent advances in the last four years, including the various smart routes to construct rough surfaces, and a lot of chemical modifications which lead to superhydrophobicity. We also review their functions and applications to date. Finally, the promising routes from biomimetic superhydrophobic surfaces in the next are proposed. [ABSTRACT FROM AUTHOR]

Abstract: The infection process and pathological changes of Japanese wax scale, Ceroplastes japonicus Green, by the hyphomycete Lecanicillium lecanii (Zimmermann) Gams & Zare were investigated by light, scanning and transmission electron microscopy. The results showed that L. lecanii generally infected the wax scale by penetrating the integument. The anal area, the body margin, around the base of mouthparts and legs, over the stigmatic furrow and the area around the vulva were susceptible places, while the wax test had an inhibitory effect on L. lecanii. Within 24h after inoculation, conidia became attached to the cuticle, and within 48h, hyphae adhered to the integument of the scale and their tips differentiated into specialized infection pegs. Penetration of the cuticle occurred within 72h of inoculation; the fungus caused the insect cuticle to rupture and hyphae entered the insect body through these openings. Within 72h after inoculation, L. lecanii entered the hemocoele of the scale and formed blastospores. After 96h, blastospores were dispersed throughout the hemolymph and completely disrupted the hemocytes, resulting in damage of the cell nucleus and agglutination of chromatin. Concomitant to colonization of the hemolymph, the internal organs and tissues, e.g., tracheae, malpighian tubules and muscle fibers, were also infected. As the infection progressed, the wax test and body changed color from white and red, respectively, to yellowish. After 144h, the internal tissue structure was totally compromised and the insects died. After this time, new conidiophores bearing conidia were produced on the surface of the cadavers. [Copyright &y& Elsevier]

Abstract: The oxidation of bacteriochlorophylls (BChls) in peripheral light-harvesting complexes (LH2) from Rhodobacter sphaeroides was investigated by spectroelectrochemistry of absorption, fluorescence emission, and femtosecond (fs) pump–probe, with the aim obtaining information about the effect of in situ electrochemical oxidation on the pigment–protein arrangement and energy transfer within LH2. The experimental results revealed that: (a) the generation of the BChl radical cation in both B800 and B850 rings dramatically induced bleaching of the characteristic absorption in the NIR region and quenching of the fluorescence emission from the B850 ring for the electrochemical oxidized LH2; (b) the BChl-B850 radical cation might act as an additional channel to compete with the unoxidized BChl-B850 molecules for rapidly releasing the excitation energy, however the B800–B850 energy transfer rate remained almost unchanged during the oxidation process. [Copyright &y& Elsevier]

Abstract: Although it is now well established that a substantial proportion of wild-living primates in sub-Saharan Africa harbor SIV, no study to date has examined to what extent the various species are naturally infected. In this study, we first describe the development and validation of sensitive and specific SIV antibody detection assays representing all major known primate lentiviral lineages on a panel of 207 sera from 11 different primate species with known infection status. The newly developed assays were then used to determine SIV prevalence rates in nine primate species native to Cameroon. Analysis of 722 sera revealed widely varying prevalence rates, ranging from an apparent absence of SIV infection in crested mona (0/70), grey cheeked (0/36) and agile mangabeys (0/92), to prevalence rates of 3%, 4%, 11%, 27%, 39% and 52% for mustached (6/203), greater spot-nosed (8/193), northern talapoin (3/26), mantled guereza (14/52), De Brazza's (9/23) and mandrill (14/27) monkeys, respectively. The epidemiology of naturally occurring SIV infections is thus more complex than previously appreciated and the various non-human primate hosts seem to differ in their susceptibility to SIV infection. The newly developed assays should now permit to define with greater accuracy existing SIV reservoirs and associated human zoonotic risk. [Copyright &y& Elsevier]

The earthworm-derived chemoattractant ES20 interacts with its G-protein-coupled receptors on the plasma membrane of vomeronasal (VN) sensory neurons of garter snakes, resulting in an increase in inositol trisphosphate [J. Biol. Chem. 269 (1994) 16867] and a rapid phosphorylation of the membrane-bound proteins, p42/44 [Biochim. Biophys. Acta 1450 (1999) 320]. The phosphorylation of p42/44 proteins are countervailingly regulated by a protein kinase and an okadaic acid-insensitive but fluoride-sensitive protein phosphatase (PPase) [J. Liu et al. (loc. cit.)]. The phosphorylation of p42/44 induced by ES20 appears to play a role in the regulation of signal transduction pathways by modulating the GTPase activity [J. Liu et al. (loc. cit.)]. A 564-bp fragment of cDNA was obtained from VN RNA of garter snakes by reverse transcription polymerase chain reaction with degenerate primers. The 564-bp fragment was amplified, cloned, and sequenced. Northern blot analysis revealed that both the VN organ (VNO) and brain contained the gene of PPase 2C. A full-length complementary 4119-bp DNA containing an open reading frame of 1146 bp that encodes a protein of 382 amino acids with a molecular mass of 49,123 Da was obtained from the VN cDNA library of garter snakes. The deduced amino acid sequence showed 88% amino acid identity to bovine protein phosphatase 2C alpha and 87% identity to human and rat PP2C alpha and to Mg2+-dependent protein phosphatase 1A of rat and rabbit. In situ hybridization revealed that the mRNA of VN protein phosphatase 2C is expressed in the vomeronasal sensory epithelium. This is the first report of the identification of a type 2C serine/threonine protein phosphatase in the VN system. [Copyright &y& Elsevier]

A new concept of biomimetic lubricating nanosystem that realizes long-time lubrication, photothermal responsiveness and anti-inflammation property is developed. High drug loading ratio of 99%, great friction reduction by 75% for more than 7200 times without failure, and effective up-regulation of cartilage anabolic genes and down-regulation of catabolic proteases and pain-related genes are achieved. Our work provides a bioinspired strategy to employ metal organic framework with controlled surface and structure for synergistic therapy of osteoarthritis. [Display omitted] Failure of articular cartilage lubrication and inflammation are the main causes of osteoarthritis (OA), and integrated treatment realizing joint lubrication and anti-inflammation is becoming the most effective treat model. Inspired by low friction of human synovial fluid and adhesive chemical effect of mussels, our work reports a biomimetic lubricating system that realizes long-time lubrication, photothermal responsiveness and anti-inflammation property. To build the system, a dopamine-mediated strategy is developed to controllably graft hyaluronic acid on the surface of metal organic framework. The design constructs a biomimetic core–shell structure that has good dispersity and stability in water with a high drug loading ratio of 99%. Temperature of the solution rapidly increases to 55 °C under near-infrared light, and the hard-soft lubricating system well adheres to wear surfaces, and greatly reduces frictional coefficient by 75% for more than 7200 times without failure. Cell experiments show that the nanosystem enters cells by endocytosis, and releases medication in a sustained manner. The anti-inflammatory outcomes validate that the nanosystem prevents the progression of OA by down-regulating catabolic proteases and pain-related genes and up-regulating genes that are anabolic in cartilage. The study provides a bioinspired strategy to employ metal organic framework with controlled surface and structure for friction reduction and anti-inflammation, and develops a new concept of OA synergistic therapy model for practical applications. [ABSTRACT FROM AUTHOR]

The PEIS-functionalized PMPC-GLM microgel-based (PEIS-Gel@PMPC-GLM) hydrogels exhibited satisfactory antibacterial and durable antifouling properties, as well as certain self-healing performance. [Display omitted] • Zwitterionic polymer cross-linked liquid metal microgels-based hydrogels were successfully prepared. • The as-prepared hydrogels have preferable mechanical properties to the original hydrogels. • The hydrogels exhibit excellent antibacterial and antifouling properties under various conditions. • The as-prepared hydrogels show certain self-healing performance. Hydrogels are a promising new class of antifouling materials. But their utility is constrained by low mechanical strength and unsatisfactory antifouling performance over the long term. Herein, we successfully prepared zwitterionic polymer PEIS cross-linked gallium-based liquid metal microgels-based (PEIS-Gel@PMPC-GLM) hydrogels via UV-curing and amidation reaction. The as-prepared hydrogels showed preferable mechanical properties and superior hydrophilicity to the original hydrogels. The PEIS-Gel@PMPC-GLM hydrogels could prevent the adhesion of more than 90 % of microalgae and nearly 100 % of bacteria in a short-term antifouling test. PEIS-Gel@PMPC-GLM hydrogels also performed exceptionally well in the high concentration antibacterial test and the long-term antifouling test (remove more than 90 % bacteria and 80 % microalgae). In addition to releasing a high concentration of gallium ions, as shown by the ICP-OES test, PEIS-Gel@PMPC-GLM hydrogels also exhibited excellent lubrication performance, as demonstrated by the friction test (coefficient of friction as low as 0.023). Therefore, the antifouling effect of gallium ions combined with the strong hydration ability of the surfaces endowed the hydrogels remarkable antibacterial and antifouling properties. As a result of the exposed gallium atoms inducing further crosslinking of residual vinyl monomer in hydrogels, PEIS-Gel@PMPC-GLM hydrogels revealed certain self-healing performance. [ABSTRACT FROM AUTHOR]

Supramolecular gelator functionalized liquid metal (Gelator@GLM) exhibited excellent tribological properties due to the synergistic effect of GLM nanodroplets and the gel generating protective film. [Display omitted] • Supramolecular gelator functionalized liquid metal nanodroplets were prepared by self-assembly and radical polymerization. • The Gelator@GLM nanodroplets displayed effective anti-wear and friction reduction properties as lubricant additives. • The lubrication performance is attributed to the synergistic effect of GLM nanodroplets and the gel generating protective film. In this work, dopamine n -butenylamide (DBA) modified GLM nanodroplets were prepared via directional ultrasound of bulk liquid metal in ethanol aqueous solution as well as DBA self-assembly, followed by grafting with urea-based gelators via radical polymerization to obtain GLM-based supramolecular gelators (Gelator@GLM). The grafting gelators can impart their good compatibility between the GLM nanodroplets and the base oil, so that the Gelator@GLM nanodroplets can be dispersed in the base oil uniformly and stably for more than 3 weeks. Meanwhile, the tribological properties of Gelator@GLM nanodroplets was significantly enhanced, with a reduction of coefficient of friction (COF) and the wear volume of 41.18% and 92.13%, respectively, when compared with the base oil. Furthermore, Gelator@GLM additives exhibited stable lubrication performance even under variable temperature and frequency conditions. The synergistic effect of GLM nanodroplets and the gels generating a physical adsorption film and a chemically protective film (containing iron and chromium oxides, nitrides and carbides) can be credited with the improved tribological performance. [ABSTRACT FROM AUTHOR]

Inspired by nature's biological water collection, the biomimetic fog harvester surface was obtained. A surface with a linear hump-valley mixed wettability pattern is designed, and it is proved that fog collection efficiency can be effectively improved at the droplet capture and transfer stage and transport stage respectively. This study highlights a simple and cheap integrated fog harvester material design. [Display omitted] By collecting water in the air, it is an important way to solve the problem of water shortage in arid and semi-arid areas. Improving the efficiency of fog harvesting is still a great challenge to be overcome. The use of 3D structure is an excellent strategy, here, a Multiple-biomimetic 3D hydrophilic and superhydrophobic fog harvester with a hump-valley structure was prepared by the combination of thermal processing and spraying. Inspired by biological water collection in nature, a 3D porous sponge surface with hydrophilic valley and superhydrophobic hump was obtained by two-step treatment. This surface structure showed excellent fog harvesting performance, which was 185 % higher than the original sponge. This structure accelerates the capture, transfer and transport of droplets during the fog harvesting process and greatly improves the efficiency of fog harvest. The results show that the chemical gradient and structural gradient actuation we constructed on the melamine sponge surface can effectively improve the fog collection efficiency. A surface with a linear hump-valley mixed wettability pattern is designed, and it is proved that fog collection efficiency can be effectively improved at the droplet capture and transfer stage and transport stage respectively. This study highlights a simple and cheap integrated fog harvester material design. [ABSTRACT FROM AUTHOR]

Inspired by the good solid–liquid interface lubrication of snowboard, this work reports a smart lubricating nanosystem by covalently decorating fluorinated graphene with hyaluronic acid through aminated polyethylene glycol bridge, which possess dual functions of long-time lubrication and thermal-responsive drug release for osteoarthritis synergetic therapy. We achieve steady lubrication for 24,000 cycles test as well as thermal-responsive and sustained drug release under near-infrared light. Good anti-inflammation and protecting effect toward chondrocytes at gene level is also obtained. [Display omitted] Most of present works of osteoarthritis (OA) therapy are focusing on reducing friction and improving drug loading capacity, while little attention is paid to realizing long-time lubrication and on-demand drug release. In this study, inspired by snowboards with good solid–liquid interface lubrication, a fluorinated graphene based nanosystem with dual functions of long-time lubrication and thermal-responsive drug release was constructed for OA synergetic therapy. An aminated polyethylene glycol bridging strategy was developed to enable covalent grafting of hyaluronic acid on fluorinated graphene. This design not only greatly increased the nanosystem's biocompatibility, but also reduced the coefficient of friction (COF) by 83.3 % compared to H 2 O. The nanosystem showed long-time and steady aqueous lubrication behavior even after more than 24,000 times of friction tests, and a low COF of 0.13 was obtained with over 90% wear volume reduction. Diclofenac sodium was controllably loaded and sustained drug release was tuned by near-infrared light. Moreover, anti-inflammation results showed that the nanosystem had good protective effect on inhibiting OA deterioration, which could up-regulate cartilage anabolic genes of Col2α and aggrecan while down-regulating catabolic proteases genes of TAC1 and MMP1. This work constructs a novel dual-functional nanosystem that realizes friction and wear reduction with long lubrication life, and shows thermal-responsive on-demand drug release with good synergistic therapeutic effect of OA. [ABSTRACT FROM AUTHOR]

This work demonstrated the hybridization of the PEG-g-PNIPAm copolymer microgel with the anti-inflammatory drug-loaded nanoMOFs that can achieve excellent tribological performance and anti-inflammatory effect for the synergistic therapy of OA. The incorporation of PEG chains into the PNIPAm microgel matrix to grow on the nanoMOFs greatly improved the high-temperature aqueous dispersion stability, facilitated the aqueous lubricating performance, and supported temperature-modulated tribological properties. [Display omitted] • Developed hybrid microgel nanocarriers of PEG-g-PNIPAm copolymer-coated nanoMOFs. • Demonstrated reversibly thermo-sensitive swelling-collapsing behavior of the hybrid. • Achieved excellent aqueous lubrication using nanoMOF@PEG-g-PNIPAm as additives. • Regulated OA-related genes and protein expression of chondrocyte with inflammation. This paper demonstrates the hybridization of copolymer microgel with drug-loaded metal–organic frameworks nanoparticles that can achieve excellent aqueous lubricating performance and anti-inflammatory effect for synergistic treatment of osteoarthritis (OA). Poly(ethylene glycol)- graft -poly(N -isopropylacrylamide) (PEG-g-PNIPAm) microgel layer is grown on the MIL-101(Cr) surface via one-pot soap-free emulsion polymerization method. The lower critical solution temperature of the MIL-101(Cr)@PEG-g-PNIPAm hybrid is raised significantly by incorporating PEG chains into the PNIPAm microgel matrix, which greatly enhances the high-temperature aqueous dispersion stability. The hybrid microgel demonstrated reversibly thermo-sensitive swelling-collapsing behavior to modulate the optical properties and hydrodynamic size. Using as aqueous lubricating additives, the hybrid reduces over 64% and 97% in friction coefficient and wear volume. Also, the hybrid supports desirable temperature-controlled lubrication modulation due to their reversible thermo-responsive behavior, which is benefit to joint lubrication of OA. After encapsulating anti-inflammatory diclofenac sodium (DS), the DS-MIL-101(Cr)@PEG-g-PNIPAm shows thermo-responsive drug release in aqueous media, which can improve the drug-delivery efficiency. By co-culturing the DS-loaded hybrid with human normal chondrocytes, we demonstrate good biocompatibility and anti-inflammatory effect on the chondrocytes with inflammation by regulating the expression of OA-related genes and proteins. Our work establishes multifunctional MOFs-based hybrid microgel systems for advanced colloids modulation and biomedical application. [ABSTRACT FROM AUTHOR]

It has been revealed experimentally that some superhydrophobic surfaces in nature, such as rice leaf, show strong anisotropic wetting behavior. In this work, based on a thermodynamic approach, the effects of profile shape of parallel grooved microstructure on free energy (FE) with its barrier (FEB) and equilibrium contact angle (ECA) with its hysteresis (CAH) for various orientations of different parallel micro texture surface have been systematically investigated in detail. The results indicated that the anisotropy of wetting properties strongly depended on the specific topographical features and wetting state. In particular, a paraboloidal profile of parallel micro-texture surface is used as an important example to theoretically establish the relationship between surface geometry and anisotropic wetting behavior for optimal design, showing that the wetting behavior of the composite state is similar to that of the non-composite state and the anisotropy will possibly be appeared with the decrease of height or intrinsic contact angle of paraboloidal profile of micro texture. [ABSTRACT FROM AUTHOR]

[Display omitted] Shear thickening fluids (STFs) have been the research focus for decades because of the prospect as a damping ingredient. However, their inherent liquid character confines their practical applications. In this work, inspired by the assembly engineering, novel gelatinous shear thickening fluids (GSTFs) are fabricated by integrating low molecular weight gelators (LMWGs) into STFs and investigated by rheological experiments. The results show that the apparent performances of GSTFs are determined by the LMWGs content. LMWGs inside GSTFs can assemble into three-dimensional network that can constraint the flowability of liquid molecular and their content dominate the density and strength of assembly network. At a moderate content, GSTFs exhibit desired properties with restricted quasi-static flowability and almost undamaged dynamic shear thickening character. While a higher content will disappear shear thickening and a lower content cannot gelate STFs. Besides, three different LMWGs are employed to gelate STFs and all they can gelate STFs in spite of the distinct minimum gelation concentration, indicating the universality for GSTFs preparation and the superiority of a reasonable molecular structure of LMWGs. Further, the temperature sweep experiments suggest that GSTFs can endure higher temperature without flowing due to its higher gel-sol transition temperature. Basing on these advanced mechanical properties, we believe that the GSTFs with more expected characters have significance for the study of non-Newtonian fluids and will broaden the special application field of STFs. [ABSTRACT FROM AUTHOR]

Inspired by nature, we prepared a wettability gradient based on the structural gradient, and the two work together to promote the directional transportation of water droplets. In addition, we designed an array model to study fog collection behavior. [Display omitted] • Prepared a copper needle with structure and wettability gradient. • The effects of structure gradient and wettability gradient are explored. • The effect of droplet volume and tilt angle on transport velocity is explored. • The influence of structure and wettability gradient on performance is discussed. • Small three-dimensional array device was prepared and applied to fog collection. The droplet manipulation behavior is affected by chemical structural driving force (including the superposition of electric, magnetic, optical and thermal fields), which directly determine transportation velocity. A lot of research has focused on a single driving force that induces the directional transportation behavior, which affects its performance. A simple method for preparing wettability gradient conical copper needles (WGCCN) combining structural gradient and chemical gradient was formulated. The effect of droplet volume and tilt angles on droplet transport velocity was systematically studied. The process of droplet transport was revealed through theoretical model and mechanical analysis. Finally, the application of WGCCN and its array model in fog collection were explored. A continuous chemical gradient in the conical structure gradient induces the droplet directional transportation, and the transportation velocity depends on the droplet volume. In addition, under the cooperation effect of multiple driving force, the droplet can still be transported in a directional orientation even if it is tilted at a certain angle. The simple droplet manipulation behavior portends that the droplets directional transport behavior can be applied in microfluidic manipulation by cooperation of effective multiple driving force with satisfactory results. [ABSTRACT FROM AUTHOR]

As phototheranostic agents, carbon dots (CDs), have recently drawn considerable attention due to their excellent physicochemical properties. However, the complex synthetic route and high-cost of CDs greatly limit their practical application. To address this issue, given their nearly infinite supply from nature, Hypocrella bambusae is used as the precursor for the preparation of CDs in this study. The obtained Hypocrella bambusae CDs (HBCDs) possess good water solubility, broad absorption (350–800 nm), red-light emission (maximum peak at 610 nm), and low biotoxicity. Moreover, HBCDs can highly generate 1 O 2 (0.38) and heat (27.6%) under 635 nm laser irradiation. These excellent properties of HBCDs capacitate them to be utilized for bimodal fluorescence/photoacoustic imaging-guided synergistic photodynamic therapy (PDT)/photothermal therapy (PTT). This work provides a new candidate for tumor treatment with the combination of PDT and PTT, and explores a novel approach for the preparation of CD-based phototheranostic agents with natural biomass as raw carbon sources. [ABSTRACT FROM AUTHOR]

A new class of ionic liquid gels (ionogels) is prepared through the supramolecular self-assembly of imidazolium-based ionic liquids (ILs) bearing the urea group as gelators in normal ILs. The ILs gelator can self-assemble through hydrogen bonding and hydrophobic interaction to form analogous lamellar structures and solidify base ILs. The obtained ionogels exhibit superior anticorrosion and conductivity characteristics. Moreover, ionogels show fully thermoreversible and favorable thixotropic characteristics, such that they can be used as high-performance semisolid conductive lubricants. The tribological tests reveal that these ionogels lubricants can effectively reduce the friction of sliding pairs effectively and have better tribological performance than the pure ILs under harsh conditions. Ionogel lubricants not only maintain the excellent tribological properties and conductivity of ILs, but also prevent base liquids from creeping and leakage. Therefore, ionogel lubricants can be potentially used in the conductive parts of electrical equipments. [ABSTRACT FROM AUTHOR]

Abstract: A simple method for the fabrication of silica nanoparticle film based on the covalent-bonding interaction between carboxylic acid-functionalized silica nanoparticles (SiO2–COOH) and amino-terminated silicon wafer was developed. Prior to assembly, silica nanoparticles with an average diameter 80 nm were prepared using the Stöber method, amino-functionalized silica nanoparticles (SiO2–NH2) were prepared by a silanization with 3-aminopropyltriethoxysilane (APTES), while carboxylic acid-functionalized silica nanoparticles (SiO2–COOH) were prepared by a ring opening linker elongation reaction of the amine functions with succinic anhydride, at the same time, amino-terminated silicon wafer (Si–NH2) was obtained by self-assembling 3-aminopropyltriethoxysilane, then one layer relative close-packed carboxylic acid-functionalized silica nanoparticles (SiO2–COOH) was arranged on silicon wafer through amidation reaction under DCC coupling agent. [Copyright &y& Elsevier]

Abstract: In the present article, stable biomimetic superhydrophobic surfaces on aluminum alloy are obtained by wet chemical etching following modification with crosslinked silicone elastomer, perfluorononane (C9F20), and perfluoropolyether (PFPE), respectively. The formation and structure of superhydrophobic surfaces were characterized by means of scanning electron microscopy (SEM), water contact angle measurement, Fourier transform infrared spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The effects of surface roughness resulted from the etching time, and the concentration of NaOH aqueous solution on the superhydrophobicity of the surfaces have been discussed in detail. The optimal surface roughness of starting material is about 0.05–0.5 μm and the resulting surface roughness should be controlled between 2.7 and 5.8 μm in order to realize the superhydrophobicity on aluminum alloy; if the concentration of NaOH aqueous solution is about 4 wt%, the best treatment time is between 2 and 4 h to form a surface roughness changing from 2.7 to 5.8 μm. The trapped air with the binary structure plays a key role in fabricating superhydrophobic surface on aluminum alloy. In other words, the unusual structure on the surface, which has a binary structure consisted of microprotrusions and nanoparticles, plays a very vital role in constructing of the stable biomimetic superhydrophobic surface on aluminum alloy. [Copyright &y& Elsevier]

The small GTPase Ran is a member of the Ras superfamily of small GTP-binding proteins, which plays a key role in the translocation of RNA and proteins through the nuclear pore complex. In this study, the full-length cDNA sequence of LmRan gene was obtained, which consists of 648-nucleotides open reading frame (ORF) and encodes 215 amino acids. RT-qPCR results revealed that LmRan was expressed in all developmental days and tissues investigated. Injection of ds LmRan into 4th and 5th instar nymphs, resulted in a significant down-regulation of LmRan transcripts, respectively. All ds LmRan -injected nymphs died before molting. Further hematoxylin and eosin staining of the integument showed that there was no apolysis occurred after silencing LmRan. In addition, the weight of ds LmRan- injected nymphs was significantly lower than that of the control group, and the gastric caecum and midgut was severely smaller. Especiallly, the mRNA level of LmCYP302a1 , LmCYP315a1 and LmCYP314a1 responsible for 20E synthesis, LmE75 and LmE74 genes involved in the 20E signaling pathway, LmGfat, LmUAP1 and LmCHT10 genes involved in chitin metabolism pathway were dramatically decreased in the ds LmRan- injected nymphs. Together, the results indicated that LmRan participate in the 20E signaling pathway, which is essential for the growth and development of locusts. [Display omitted] • We identified a small GTPase Ran gene from Locusta migratoria transcriptome database. • Nymphs injected with ds LmRan failed to molt with no apolysis occured. • There were severe defects in gastric caeca and midguts in ds LmRan treatment. • LmRan regulated the genes for 20E synthesis and signaling and chitin metabolism. [ABSTRACT FROM AUTHOR]

Chitin deacetylases including CDA1 and CDA2, containing a chitin deacetylase domain and an LDL domain, have been reported to be essential for cuticle structure differentiation in different insect species. However, it is yet unexplored whether CDA1 and CDA2 activity is needed for the function of the cuticle as a barrier against pathogen and xenobiotics penetration. In this study, we studied the efficiency of fungal infection in the migratory locust Locusta migratoria in dependence of LmCDA1 and LmCDA2 function. Second instar nymphs injected with dsRNA against LmCDA1 and LmCDA2 transcripts were less resistant against the infection by the fungus Metarhizium anisopliae than control nymphs. At the same time, permeability to organophosphorus pesticides was increased in these nymphs. Interestingly, the CHC amounts at the cuticle surface were unaffected upon LmCDA1 and LmCDA2 reduction. These results suggest that the barrier function of the locust cuticle not only depends on surface CHCs, but also on an intact procuticle. [Display omitted] • ds LmCDA1 and ds LmCDA2 RNAi in 2nd instar nymphs showed higher susceptibility to fungal and organophosphorus pesticides treat. • CHCs amounts and composition in ds LmCDA1 and ds LmCDA2 injected 2nd instar nymphs were normal compared with control nymphs. • A yet unknown CDA-dependent repellent property of the cuticle acts in parallel toCHC layer as a barrier against threats. [ABSTRACT FROM AUTHOR]

Successful implantation happens only when the development of a competent blastocyst synchronized with the differentiation of a receptive uterus. The exact mechanism affecting embryo implantation competency is still unclear. Previous data from our laboratory showed that several members of the let-7 family were up-regulated in the implanting dormant blastocysts and prohibited embryo activation through down-regulation integrin-β3. However, how the mir-let-7 family is regulated is still a question. In this study, the in vitro co-culture model was applied to imitate implantation. Human embryo surrogate Jeg-3 spheroids and endometrium epithelial cells Ishikawa were used. The following views were demonstrated. Firstly，Wnt/β-catenin signaling is essential for Jeg-3 spheroids implantation. Secondly, mir-let-7a is repressed by Wnt signaling, and low let-7a is beneficial for spheroids attachment and outgrowth. Third, in contrast with let-7a, lin28a is up-regulated by Wnt and promotes attachment and outgrowth. Lastly, the function of Wnt in embryo surrogate spheroids in implantation is mediated through lin28a/let-7a axis. In summary, our findings suggest Wnt/β-catenin signaling strength human embryo surrogate spheroids implanting potential through regulation lin28a/let-7a axis. [ABSTRACT FROM AUTHOR]