Search

Battery type electrodes would replace the currently available pseudocapacitive electrodes by the cause of high energy density and long discharge time. In this regard, battery type carbon coated CoFe 2 O 4 spherical nanoparticles is prepared by the facile hydrothermal method and tested as the possible negative electrode for supercapattery applications. The phase purity, electronic states of elements, and the presence of carbon is inferred through various sophisticated techniques. The calculated surface area of CoFe 2 O 4 and carbon coated CoFe 2 O 4 are found to be 9 and 26 m 2  g -1 , respectively. The morphological analysis confirms the formation of uniform CoFe 2 O 4 nanospheres (∼25 nm) with a thin layer of carbon coating (∼2 nm). The amorphous carbon coating over CoFe 2 O 4 nanosphere is identified via high-resolution transmission electron microscope. The observed peak and plateau regions in the cyclic voltammogram and galvanostatic charge/discharge curves reveals the battery-type charge storage behaviour of the material. The carbon coated CoFe 2 O 4 delivers the maximum length capacitance of 9.9 F m -1 at 1 mV s -1 with a useful lifespan over 5000 cycles. The electrochemical impedance spectroscopy reveals that the carbon-coated CoFe 2 O 4 delivers the low charge transfer resistance than CoFe 2 O 4 . Further, the fabricated supercapattery provides the energy density of 160 × 10 -8  Wh cm -1 at a power density of 67.2 μW cm -1 . As well as, the device shows 93% of coulombic efficiency and 75% of the specific capacitance retention over 11,000 cycles. Overall, it is believed that the carbon-coated CoFe 2 O 4 can serve as a good candidate for flexible supercapatteries., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Biomass-derived porous carbon has been considered as a promising sulfur host material for lithium-sulfur batteries because of its high conductive nature and large porosity. The present study explored biomass-derived porous carbon as polysulfide reservoir to modify the surface of glass fiber (GF) separator. Two different carbons were prepared from Oak Tree fruit shells by carbonization with and without KOH activation. The KOH activated porous carbon (AC) provides a much higher surface area (796 m 2  g -1 ) than pyrolized carbon (PC) (334 m 2  g -1 ). The R factor value, calculated from the X-ray diffraction pattern, revealed that the activated porous carbon contains more single-layer sheets with a lower degree of graphitization. Raman spectra also confirmed the presence of sp 3 -hybridized carbon in the activated carbon structure. The COH functional group was identified through X-ray photoelectron spectroscopy for the polysulfide capture. Simple and straightforward coating of biomass-derived porous carbon onto the GF separator led to an improved electrochemical performance in Li-S cells. The Li-S cell assembled with porous carbon modified GF separator (ACGF) demonstrated an initial capacity of 1324 mAh g -1 at 0.2 C, which was 875 mAh g -1 for uncoated GF separator (calculated based on the 2nd cycle). Charge transfer resistance (R ct ) values further confirmed the high ionic conductivity nature of porous carbon modified separators. Overall, the biomass-derived activated porous carbon can be considered as a promising alternative material for the polysulfide inhibition in Li-S batteries., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Hierarchically structured spherical CuBi2O4 particles were prepared using a facile hydrothermal method without using a surfactant over various hydrothermal reaction periods. The prepared CuBi2O4 samples were examined via X-ray diffraction (XRD), which confirmed the formation of a tetragonal crystal structure. The morphological features were analyzed using field emission scanning electron microscopy (FESEM), which elucidated the construction of the hierarchical microspherical CuBi2O4 particles. The plausible growth mechanism of the hierarchical structure was explained in terms of a time-dependent synthesis process and its crystal structure. The uniform hierarchical CuBi2O4 microspheres were used to fabricate a Li-ion hybrid capacitor (Li-HC) along with activated carbon (AC), the generated device delivers a stable specific capacitance of 26.5 F g(-1) over 1500 cycles at a high current density of 1000 mA g(-1) and a capacity retention of ∼86%. The AC/CB2 Li-ion hybrid cell exhibits high energy density and power density values of 24 W h kg(-1) and 300 W kg(-1), respectively., (Copyright © 2016 Elsevier Inc. All rights reserved.)

One-dimensional (1D) NiMoO4⋅xH2O nanorods and β-FeMoO4 microrods are successfully synthesized by simple hydrothermal method without using any organic solvents. X-ray diffraction (XRD) patterns reveal the single phase formation of nickel molybdate (NiMoO4⋅xH2O) and pure monoclinic phase of β-FeMoO4. The growth of one dimensional morphology of both the molybdates are identified from scanning and transmission electron microscopes (SEM and TEM). The cyclic voltammogram envisage the pseudocapacitance behavior of NiMoO4⋅xH2O and β-FeMoO4 through the reversible redox reactions of Ni(3+)/Ni(2+) and Fe(3+)/Fe(2+) ions. An asymmetric supercapacitor is fabricated using NiMoO4⋅xH2O nanorods and β-FeMoO4 as a positive and negative electrode, respectively. The β-FeMoO4||NiMoO4⋅xH2O asymmetric supercapacitor delivers a capacitance of 81 F g(-1) at a current density of 1 mA cm(-2). The cell exhibits a high energy density of 29 W h kg(-1) and good cycling stability even after 1000 cycles., (Copyright © 2014 Elsevier Inc. All rights reserved.)