Search

Indacaterol, a β2 agonist prescribed for long-term management of patients with chronic obstructive pulmonary disease and asthma. In this study the first MISPE cartridges was developed using indacaterol as a template for its selective extraction from rat lung tissues, enabling precise pharmacokinetic evaluation at the drug's site of action. A molecular imprinting polymer was synthesized using indacaterol as a template, methacrylic acid as a functional monomer and ethylene glycol dimethacrylate as a cross-linker with a molar ratio (1: 4: 20). The polymer was characterized by a high binding capacity of 9840 ± 0.86 and high selectivity with an imprinting factor of 4.53 ± 0.12. The synthesized polymer was utilized as a sorbent in solid-phase extraction to purify and extract indacaterol from lung tissue matrix. The optimum molecularly imprinted solid-phase extraction (MISPE) conditions were 20.0 mg of molecular imprinting polymer and non-imprinting polymer, acetonitrile as the loading solvent, acetonitrile: water (20: 80; by volume) as the washing solvent, and methanol: acetic acid (90: 10; by volume) as the eluting solvent. A pharmacokinetic study was performed for indacaterol in rat lungs using the synthesized and optimized MISPE cartridge as a tool for sample purification. These parameters were determined in the lung tissues of rats emphasizing the local exposure of indacaterol to its target organ. The Cmax and Tmax were 51.020 ± 2.810 µg mL− 1 and 0.083 ± 0.001 h, respectively. The AUC 0−24 and AUC0 − inf were 175.920 ± 1.053 and 542.000 ± 5.245 µg h mL− 1, respectively. The elimination rate constant was 0.014 ± 0.00012 h− 1 and the half-life time was 48.510 ± 0.012 h. This study successfully developed and optimized MISPE cartridges using indacaterol as a template, enabling precise pharmacokinetic evaluation in rat lung tissues. The cartridges demonstrated high binding capacity and selectivity, providing crucial insights into the local exposure of indacaterol at its site of action. [ABSTRACT FROM AUTHOR]

Digital light processing (DLP) 3DP, commercial acrylate-based photocurable resins, and thermally expandable microspheres-incorporated flexible photocurable resins were employed to fabricate an SPE column with a thermally expanded monolithic foam for extracting Mn, Co, Ni, Cu, Zn, Cd, and Pb ions prior to the determination using inductively coupled plasma mass spectrometry. After optimization of the thermally activated foaming, the design and fabrication of the SPE column, and the automatic analytical system, the DLP 3D-printed SPE column with the thermally expanded monolithic foam extracted the metal ions with up to 14.8-fold enhancement (relative to that without incorporating the microspheres), with absolute extraction efficiencies all higher than 95.6%, and method detection limits in the range from 0.5 to 5.2 ng L–1. We validated the reliability and applicability of this method by determination of the metal ions in several reference materials (CASS-4, SLRS-5, 1643f, and Seronorm Trace Elements Urine L-2) and spiked seawater, river water, ground water, and human urine samples. The results illustrated that to incorporate the thermally expandable microspheres into the photocurable resins with a post-printing heating treatment enabled the DLP 3D-printed thermally expanded monolithic foam to substantially improve the extraction of the metal ions, thereby extending the applicability of SPE devices fabricated by vat photopolymerization 3DP techniques. [ABSTRACT FROM AUTHOR]

Background: Wastewater can contain a complex mixture of organic micropollutants, with both chemical analysis and effect-based methods needed to identify relevant micropollutants and detect mixture effects. Solid-phase extraction (SPE) is commonly used to enrich micropollutants prior to analysis. While the recovery and stability of individual micropollutants by SPE has been well studied, few studies have optimized SPE for effect-based methods. The aim of the current study was to develop and evaluate two standard operating procedures (SOPs) for the enrichment of micropollutants in preparation for chemical analysis and bioanalysis, one covering a broad range of chemicals and the other selective for estrogenic chemicals. Results: Pristine surface water spiked with > 600 micropollutants was used to develop a generic extraction method for micropollutants with a wide range of physiochemical properties, while water spiked with estrogenic chemicals was used to identify a selective extraction method. Three different SPE sorbents were tested, with recoveries of individual chemicals and effect in assays indicative of mutagenicity, estrogenic activity, and fish embryo toxicity assessed. The sorbent HRX at pH 7 was selected for the generic extraction method as it showed the best recovery of both individual chemicals and effect in the bioassays. The sorbent HLB at pH 3 showed optimal recovery of estrogenic chemicals and estrogenic activity. The two optimal SPE methods were applied to spiked and unspiked wastewater effluents, with the concentrations of detected chemicals and observed effects similar to those of previous studies. The long-term storage of both extracts and SPE cartridges for estrogens and estrogenic activity after extraction with the HRX and HLB methods were evaluated, with estrogenic effectiveness close to 100% after 112 days when HLB was used. Conclusions: HRX is recommended for generic extraction, while HLB is optimal for the selective extraction of estrogenic micropollutants. However, if a laboratory only wants to use a single SPE sorbent, HLB can be used for both generic and selective extraction as it yielded similar chemical and effect recovery as HRX for a wide range of micropollutants. This paper is supplemented by the final SOP that includes a variant for generic extraction and one for the extraction of estrogenic chemicals. [ABSTRACT FROM AUTHOR]

A simple, fast, and low-cost pre-concentration methodology based on the application of solid-phase extraction coupled to layered double hydroxides (LDHs) and capillary electrophoresis was developed for the determination of naproxen (NPX), diclofenac (DFC), and ibuprofen (IBP) in environmental sample waters. A systematic study of the LDH composition was designed, including the effects of interlayer anions (NO3−, Cl−, CO32−, BenO−, and SDS−) and the effect of molar ratio (Mg:Al). The optimal composition of MgAl/Cl−-LDH (Mg:Al; 1.5:1.0) was coupled to an SPE system: pH (neutral pH), LDH amount (15 mg), and extraction capacity ranged from 79.71 to 83.11% for the three anti-inflammatory non-steroidal agents analyzed. A recovery rate of up to 80.87% was obtained when 0.01 M chloride acid in methanol was used as the eluent and 50 mL of sample was used. Under optimal conditions, the linear range of the calibration curve ranges from 18.02 to 200 μg L−1, with limits of detection ranging from 6.03 to 18.02 μg L−1 for the three NSAIDs. The precision of the methodology was evaluated in terms of inter- and intra-day repeatability, with %RSD < 10% in all cases. The proposed method was applied to analyze environmental water samples (bottle, tap, cistern, well, and river water samples). The developed method is a robust technique capable of combining with other analytical methods to quantitatively determine anti-inflammatory non-steroidal agents. [ABSTRACT FROM AUTHOR]

The global rise of new psychoactive substances (NPSs) poses challenges for their analysis in biological matrices due to their complex chemistries and short market lifespan. A comparative study for the simultaneous extraction, separation, and detection of 19 NPSs was conducted. Six solid-phase extraction (SPE) methods and one supported liquid extraction method (SLE) were compared for the extraction of analytes from blood, serum, plasma, and urine. Comparisons of four derivatization agents were conducted, at four temperatures and two incubation times. Extraction methods were assessed by precision, sensitivity, and extraction efficiency. Derivatizing agents were assessed on their selectivity and sensitivity, and a three-way ANOVA was conducted to determine statistical significance. CSDAU SPE cartridges were shown to be the most efficient when extracting analytes from blood, serum, and plasma, whereas Xcel I cartridges performed the strongest when extracting analytes from urine. SPE extraction efficiencies, when utilizing the best-performing cartridges, ranged from 49 to 119%. SLE successfully extracted all analytes from all matrices (ranging from 22 to 120%). Pentafluoropropionic anhydride: ethyl acetate was the most successful derivatizing agent, allowing all analytes to be detected, with the highest peak area responses and more unique spectra. The optimum temperature for incubation was 37 °C, with no statistical difference found between the two incubation times. [ABSTRACT FROM AUTHOR]

In this study, amino-modified micro-mesoporous silica (NH2-MMS) with hierarchical pores was prepared by modifying micro-mesoporous silica ZSM-5 with 3-aminopropyltriethoxysilane and used as an adsorbent in solid-phase extraction to analyze free fatty acids (FFAs) in krill oil during storage for an initial time. The Brunner Emmet Teller adsorption experiment and Fourier transform infrared spectroscopy demonstrate that NH2-MMS, with a hierarchical pore structure, was successfully synthesized. The adsorption experiments, especially static adsorption, indicate that the absorption ability of the prepared NH2-MMS, with a hierarchical pore structure, toward FFAs was better than that of traditional amino-modified mesoporous silica (SBA-15) with a mesoporous structure at all temperature and concentrations. Fairly low limits of detection (0.06–0.15 μg g−1), acceptable recoveries (85.16–94.31%), and precision (0.08–5.26%) were attained under ideal circumstances. Moreover, NH2-MMS has the advantages of easy preparation and being environmentally friendly. As a result, this method offers an alternative to the current method for determining FFAs in different kinds of oil specimens. [ABSTRACT FROM AUTHOR]

A novel doxorubicin hydrochloride liposome injection was prepared to reduce toxicity and side effects, as well as extend plasma half-life in the treatment of breast cancer. In this study, a rapid and sensitive bioanalytical method was developed and validated to characterize the pharmacokinetic profile of total and free doxorubicin in plasma of 3 Chinese patients after intravenous infusion of this injection. Plasma samples were prepared by protein precipitation for the determination of total doxorubicin, while solid phase extraction was used to determine free doxorubicin. After plasma sample pre-treatment, total and free concentrations were quantified individually using a validated LC-MS/MS method. The calibration curves were found to be linear in the range of 0.20–500.0 ng mL−1 for total doxorubicin and in the range of 1.00–1,000 ng mL−1 for free doxorubicin. The free concentrations in plasma were only one sixth to one quarter of the total levels. Liposomal doxorubicin had a longer apparent half-life (>50 h) than the non-targeted drug (<10 h) reported in the reference. and a lower volume of distribution. This novel injectable formulation steadily released free doxorubicin from liposomes over a long period of time to reduce cardiac toxicity and side effects, while ensuring a clinical curative effect. [ABSTRACT FROM AUTHOR]

UV spectrophotometric determination of salicylic acid in several multicomponent drugs using an ethylcellulose-based sorbent for solid-phase extraction (SPE) for sample preparation was shown to be selective. Selective binding of the analyte to sorbent active sites and stepwise elution successively with purified water and NaOH solution (0.1 M) during SPE eliminated interference of other active pharmaceutical ingredients of multicomponent drugs during identification and quantitation of salicylic acid by UV spectrophotometry. Use of the ethylcellulose sorbent made it possible to improve the metrological parameters and decrease systematic error of the quantitative procedure by an average of 47%. [ABSTRACT FROM AUTHOR]

This work focuses on the development of a hybrid material based on SBA-15 silica with a molecularly imprinted polymer (MIP), using spiramycin (SPI) as a template, for use as sorbent in solid-phase extraction (SPE). Characterization techniques such as nitrogen gas adsorption–desorption isotherms, infrared spectroscopy and scanning electron microscopy confirmed the structure and properties of the SBA-15@MIP-SPI material. SPE conditions using SBA-15@MIP-SPI as sorbent were optimized, which allowed us to demonstrate the high selectivity and adsorption capacity of SPI on the synthesized material. The best conditions were 50 mg of sorbent, loading with 1 mL of standard solution or sample of cow milk previously extracted in acetonitrile and eluting with 3 mL of methanol with 1% acetic acid. After the optimization process, the material demonstrated recovery percentages of 81 ± 3% in SPI standard solutions and showed its potential in cow milk samples (71 ± 6%). The novelty of the research consists of the combination of MIPs with SBA-15, which could offer important advantages in terms of specific surface area and porous structure, thus improving performance and reducing the amount of sorbent compared to other traditional methods. [ABSTRACT FROM AUTHOR]

To determine the paclitaxel-related substances in a paclitaxel injection (albumin-bound), it is necessary to remove human blood albumin from the sample via solid-phase extraction and subsequently perform high-performance liquid chromatography analysis. The pre-processing operation is complicated, the duration of analysis is long, and much human power and material resources are needed in the sample testing process. Thus, the purpose of this study was to develop a quick two-dimensional liquid chromatography method that requires less consumables and possesses high sensitivity. Samples were directly injected into one-dimensional solid-phase extraction columns to remove human blood albumin. Paclitaxel and its related substances in the solid-phase extraction columns were then eluted into two-dimensional analytical columns through valve switching technology. The sample pretreatment step can be omitted in this method, which allows for the analysis of paclitaxel and its related substances to be completed more quickly, within only 15 min, under the developed two-dimensional elution conditions. The established method had good linearity (R2 = 0.9994), limit of detection (0.25 μg·mL−1), limit of quantification (0.5 μg·mL−1), precision (RSD = 0.5%), and accuracy (102.53–107.97%). [ABSTRACT FROM AUTHOR]

For the first time, a highly permeable nanoporous carbon derived from melamine-based polybenzoxazine (NPC-PBZ-m) was used as the solid-phase extraction sorbent for trace analysis of atrazine (ATZ) herbicide in environmental water samples as a pre-treatment to enhance detection for high-performance liquid chromatography. Extraction performance was investigated using an agricultural field matrix-water sample. The parameters affecting the solid-phase extraction efficiency were carefully investigated. The optimisation conditions were determined as 200.0 mg of sorbent with an adsorption flow rate of 10.0 mL min−1, an elution flow rate of 1.0 mL min−1, and an elution volume of 3.0 mL. Moreover, it was not necessary to adjust the pH of the sample. Under these optimised extraction conditions, good linearity between 5.00 and 30.0 µg L−1 was achieved along with a limit of detection (LOD) of 1.25 µg L−1 and a limit of quantification (LOQ) of 3.79 µg L−1. Furthermore, the reusability of the NPC-PBZ-m column was found up to 8 cycles making it a new cost-effective material for herbicide enrichment. Finally, this developed method was successfully applied to analyse ATZ in water samples from rice fields, fish farms, and natural canal water, with 98–117% relative recoveries. These results indicate that NPC-PBZ-m with our proposed method is feasible and demonstrates its potential application as an effective adsorbent for herbicide enrichment. [ABSTRACT FROM AUTHOR]

Copyright of Shipin Kexue/ Food Science is the property of Food Science Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The aim of this study was to develop a high‐performance liquid chromatography–tandem mass spectrometry method for the determination of 6‐cyanodopamine, 6‐nitrodopamine, 6‐nitrodopa, 6‐nitroadrenaline and 6‐bromodopamine in human plasma samples. Strata‐X 33 μm solid‐phase extraction cartridges were used for the extraction of the catecholamines from human plasma samples. The catecholamines were separated in a 150 × 3 mm Shim‐pack GIST C18‐AQ column with 3 μm particle size, placed in an oven at 40°C and perfused with 82% mobile phase A (acetonitrile–H2O; 90:10, v/v) + 0.4% acetic acid and 18% mobile phase B (deionized H2O) + 0.2% formic acid at a flow rate of 340 μl/min in isocratic mode. The injected volume was 4 μl and the run lasted 4 min. The method was linear from 0.1 to 20 ng/ml and the lower limit of quantification was 0.1 ng/ml for all analytes. The method was applied to evaluate the plasma levels of catecholamines in plasma of patients with chronic kidney disease and allowed the detection for the first time of circulating levels of the novel catecholamines 6‐bromodopamine and 6‐cyanodopamine. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Food Safety & Quality is the property of Journal of Food Safety & Quality Editorial Department and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract Indacaterol, a β2 agonist prescribed for long-term management of patients with chronic obstructive pulmonary disease and asthma. In this study the first MISPE cartridges was developed using indacaterol as a template for its selective extraction from rat lung tissues, enabling precise pharmacokinetic evaluation at the drug’s site of action. A molecular imprinting polymer was synthesized using indacaterol as a template, methacrylic acid as a functional monomer and ethylene glycol dimethacrylate as a cross-linker with a molar ratio (1: 4: 20). The polymer was characterized by a high binding capacity of 9840 ± 0.86 and high selectivity with an imprinting factor of 4.53 ± 0.12. The synthesized polymer was utilized as a sorbent in solid-phase extraction to purify and extract indacaterol from lung tissue matrix. The optimum molecularly imprinted solid-phase extraction (MISPE) conditions were 20.0 mg of molecular imprinting polymer and non-imprinting polymer, acetonitrile as the loading solvent, acetonitrile: water (20: 80; by volume) as the washing solvent, and methanol: acetic acid (90: 10; by volume) as the eluting solvent. A pharmacokinetic study was performed for indacaterol in rat lungs using the synthesized and optimized MISPE cartridge as a tool for sample purification. These parameters were determined in the lung tissues of rats emphasizing the local exposure of indacaterol to its target organ. The Cmax and Tmax were 51.020 ± 2.810 µg mL− 1 and 0.083 ± 0.001 h, respectively. The AUC 0−24 and AUC0 − inf were 175.920 ± 1.053 and 542.000 ± 5.245 µg h mL− 1, respectively. The elimination rate constant was 0.014 ± 0.00012 h− 1 and the half-life time was 48.510 ± 0.012 h. This study successfully developed and optimized MISPE cartridges using indacaterol as a template, enabling precise pharmacokinetic evaluation in rat lung tissues. The cartridges demonstrated high binding capacity and selectivity, providing crucial insights into the local exposure of indacaterol at its site of action.

Abstract Background Wastewater can contain a complex mixture of organic micropollutants, with both chemical analysis and effect-based methods needed to identify relevant micropollutants and detect mixture effects. Solid-phase extraction (SPE) is commonly used to enrich micropollutants prior to analysis. While the recovery and stability of individual micropollutants by SPE has been well studied, few studies have optimized SPE for effect-based methods. The aim of the current study was to develop and evaluate two standard operating procedures (SOPs) for the enrichment of micropollutants in preparation for chemical analysis and bioanalysis, one covering a broad range of chemicals and the other selective for estrogenic chemicals. Results Pristine surface water spiked with > 600 micropollutants was used to develop a generic extraction method for micropollutants with a wide range of physiochemical properties, while water spiked with estrogenic chemicals was used to identify a selective extraction method. Three different SPE sorbents were tested, with recoveries of individual chemicals and effect in assays indicative of mutagenicity, estrogenic activity, and fish embryo toxicity assessed. The sorbent HRX at pH 7 was selected for the generic extraction method as it showed the best recovery of both individual chemicals and effect in the bioassays. The sorbent HLB at pH 3 showed optimal recovery of estrogenic chemicals and estrogenic activity. The two optimal SPE methods were applied to spiked and unspiked wastewater effluents, with the concentrations of detected chemicals and observed effects similar to those of previous studies. The long-term storage of both extracts and SPE cartridges for estrogens and estrogenic activity after extraction with the HRX and HLB methods were evaluated, with estrogenic effectiveness close to 100% after 112 days when HLB was used. Conclusions HRX is recommended for generic extraction, while HLB is optimal for the selective extraction of estrogenic micropollutants. However, if a laboratory only wants to use a single SPE sorbent, HLB can be used for both generic and selective extraction as it yielded similar chemical and effect recovery as HRX for a wide range of micropollutants. This paper is supplemented by the final SOP that includes a variant for generic extraction and one for the extraction of estrogenic chemicals.

Phosphatidylcholine (PC), phosphatidyl ethanolamine (PE), phosphatidylserine (PS), and phosphatidylinositol (PI) are the four major phospholipids in Antarctic krill. In this study, the composition of these phospholipids was analyzed by hydrophilic interaction ultra-high performance liquid chromatography-tandem mass spectrometry (HILIC-UPLC-MS/MS) after purification by solid-phase extraction (SPE) using titania-coated fibrous silica (TiO2/KCC-1) nanoparticles, which had been prepared in our laboratory. The results showed that under the optimal conditions, 291 phospholipids including 75 PCs, 120 PEs, 54 PIs and 42 PSs were detected, which were nearly twice as many as those detected by a previously reported method. Phospholipids containing monounsaturated and polyunsaturated fatty acid chains accounted for 54.73% and 26.17% of the total phospholipids, respectively. PC (40:6) (41.63%), PE (36:0) (39.77%), PI (38:3) (80.05%), and PS (36:1) (81.62%) were found to be the most abundant in the four phospholipids. Multivariate statistical analysis showed significant differences in the types of phospholipids before and after SPE treatment. TiO2/KCC-1 nanoparticles exhibited a significant enrichment capacity for phospholipids, especially PC (18:0/18:0), PE (16:0/18:1), and PI (16:0/18:2). The detection limit was 0.05 μg/g for PC, PE and PS, and 0.01 μg/g for PI. The relative standard deviations (RSDs) for the four major phospholipids were in the range of 0.89% to 5.05%, and the recoveries were 87%–112%. This method demonstrated high specificity, extraction efficiency, sensitivity, precision and accuracy. Therefore, it has broad application prospects for the extraction, purification, and analysis of phospholipids in biological samples.

In this work, we test metal–organic frameworks (MOFs) as sorbents in the solid-phase extraction (SPE) technique to determine chemical warfare agents (CWAs) and their related compounds in water samples. During this study, we used 13 target compounds to test the selectivity of MOFs thoroughly. Three MOFs were used: MIL-100(Fe), ZIF-8(Zn), and UiO-66(Zr). The obtained materials were characterized using FT-IR/ATR, SEM, and XRD. CWA's and related compounds were analyzed using gas chromatography coupled with tandem mass spectrometry (GC-MS/MS). The effect of the type of elution solvent and the amount of sorbent (MOFs) in the column on the efficiency of the conducted extraction were verified. The LOD ranged from 0.04 to 7.54 ng mL−1, and the linearity range for the analytes tested extended from 0.11/22.62 (depending on the compound) to 1000 ng mL−1. It was found that MOFs showed the most excellent selectivity to compounds having aromatic rings in their structure or a "spread" spatial structure. The best recoveries were obtained for DPAA, CAP, and malathion. Environmental water samples collected from the Baltic Sea were analyzed using an optimized procedure to verify the developed method's usefulness. [ABSTRACT FROM AUTHOR]

Neonicotinoids (NEOs), highly selective toward insect nicotinic acetylcholine receptors, are extensively used due to their effectiveness against pests and relative non‐toxicity to vertebrates. However, their prolonged persistence in soil and water has led to frequent detection in food and environmental samples, posing significant environmental and health concerns. Recent research indicates these pesticides infiltrate aquatic ecosystems, threatening aquatic life and human health. Here, we improved the ultra‐performance liquid chromatography‐mass spectrometry method for detecting NEOs in water samples, increasing its sensitivity to fulfill forthcoming detection needs. This approach enables the simultaneous quantification of eight NEOs and five NEO metabolites in diverse water sources, including tap, surface, groundwater, sewage, and seawater. Our method achieves remarkably low detection limits for direct injection (0.78–1.7 ng/L) and solid‐phase extraction methods (0.13–0.25 ng/L). Critically, our findings reveal that boiling domestic drinking water doesn't degrade NEOs; instead, it increases their concentration due to water evaporation. A 6‐min boiling period can amplify pesticide concentration by 4–5 times, presenting a significant hazard in culinary practices of specific regions where prolonged cooking could lead to alarmingly high levels of these insecticides. This research underscores the importance of monitoring and mitigating NEO contamination in water sources to safeguard environmental and public health. [ABSTRACT FROM AUTHOR]

This study presents a method based on acid transesterification and the purification by solid-phase extraction (SPE) coupled with gas chromatography–tandem mass spectrometry for quantifying 3- and 2-monochloropropanediol esters (3-MCPDE, 2-MCPDE) and glycidyl esters (GE) in nutritional foods. The fat was extracted by liquid–liquid extraction with petroleum ether and diethyl ether after the sample was hydrolysed with ammonia. Then the extract was purified by a SPE cartridge filled with the aminopropyl sorbents. It was demonstrated that the optimal elution volume for 3-MCPDE, 2-MCPDE and GE greatly depended on the sample matrix and varied from 6 to 12 mL for four different kinds of food matrices. All three analytes in the sample solution could be fully collected in the first 10–12 mL of eluate. By this way, monoacylglycerols commonly present in the samples were fully removed. Therefore, the overestimation of GE quantification was effectively eliminated. The modified analytical procedure was fully validated in a single laboratory and has been recommended as a Chinese Food Safety National Standard. In addition, two derivatisation agents, heptafluorobutyrylimidazole and phenylboronic acid, were proved to be equivalent in method accuracy and precision for the quantification of three analytes. [ABSTRACT FROM AUTHOR]

Background: The analysis of vitamins in baby food is a challenging task given the complexity of the food matrix, vitamin stability, and strict regulations of the European Union regarding permissible deviations from declared values. Vitamins in food exist in different concentrations and forms and have different stabilities; thus, the preparation of samples for a reliable analysis using the same procedure is not straightforward. Therefore, significant attention has been devoted to optimizing sample preparation in the analysis of vitamins. Methods: This study aims to determine which of the sample preparation and extraction methods is the most efficient for the simultaneous determination of vitamins A, D, E, and K in milk and baby food using high-performance liquid chromatography (HPLC). Different samples of baby food were prepared in seven different ways based on four methods (saponification, enzymatic hydrolysis, solvent extraction, and solid-phase extraction). Results and Conclusions: According to the validation parameters, the optimal preparation method proved to be solid-phase extraction with a C18 stationary phase, with recoveries of 97.4%, 96.1%, 98.3%, and 96.2% for vitamins A, D, E, and K, respectively, and HPLC with a UV–Vis detector was identified as a sufficiently sensitive technique for the identification and quantification of fat-soluble vitamins in milk and baby food. [ABSTRACT FROM AUTHOR]

N-Acyl-homoserine lactones (AHL) play a major role in the communication of Gram-negative bacteria. They influence processes such as biofilm formation, swarming motility, and bioluminescence in the aquatic environment. A comprehensive analytical method was developed to elucidate the "chemical communication" in pure bacterial cultures as well as in the aquatic environment and engineered environments with biofilms. Due to the high diversity of AHLs and their low concentrations in water, a sensitive and selective LC-ESI-MS/MS method combined with solid-phase extraction was developed for 34 AHLs, optimized and validated to quantify AHLs in bacterial conditioned medium, river water, and treated wastewater. Furthermore, the developed method was optimized in terms of enrichment volume, internal standards, limits of detection, and limits of quantification in several matrices. An unanticipated variety of AHLs was detected in the culture media of Pseudomonas aeruginosa (in total 8 AHLs), Phaeobacter gallaeciensis (in total 6 AHLs), and Methylobacterium mesophilicum (in total 15 AHLs), which to our knowledge have not been described for these bacterial cultures so far. Furthermore, AHLs were detected in river water (in total 5 AHLs) and treated wastewater (in total 3 AHLs). Several detected AHLs were quantified (in total 24) using a standard addition method up to 7.3±1.0 µg/L 3-Oxo-C12-AHL (culture media of P. aeruginosa). [ABSTRACT FROM AUTHOR]

Stanozolol, a synthetic derivative of testosterone, is one of the common doping drugs among athletes and bodybuilders. It is metabolized to a large extent and metabolites are detected in urine for a longer duration than the parent compound. In this study, a novel dummy molecularly imprinted polymer (DMIP) is developed as a sorbent for solid-phase extraction of stanozolol metabolites from spiked human urine samples. The optimized DMIP is composed of stanozolol as the dummy template, methacrylic acid as the functional monomer, and ethylene glycol dimethacrylate as the cross-linker in a ratio of 1:10:80. The extracted analytes were quantitively determined using a newly developed and validated ultrahigh-performance liquid chromatography tandem mass spectrometry method, where the limits of detection and quantitation were 0.91 and 1.81 ng mL−1, respectively, fulfilling the minimum required performance limit decided on by the World Anti-Doping Agency. The mean percentage extraction recoveries for 3'-hydroxystanozolol, 4β-hydroxystanozolol, and 16β-hydroxystanozolol are 97.80% ± 13.80, 83.16% ± 7.50, and 69.98% ± 2.02, respectively. As such, the developed DMISPE can serve as an efficient cost-effective tool for doping and regulatory agencies for simultaneous clean-up of the stanozolol metabolites prior to their quantification. [ABSTRACT FROM AUTHOR]

An amide‐based covalent organic framework (COF) was successfully synthesized using the reaction between 1,3,5‐trimesoyl chloride and ethylenediamine. The structure and morphology of the COF were characterized using Fourier‐transform infrared spectra, nuclear magnetic resonance spectroscopy, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and Brunauer‐Emmett‐Teller surface area analysis. The COF was employed as a solid‐phase extraction adsorbent for the sampling and preconcentration of chlorophenols from industrial wastewater samples prior to high‐performance liquid chromatography with ultraviolet detection. The experimental parameters influencing the extraction efficiency including type and volume of eluent solvent, sample solution volume, salt concentration, sample flow rate, and sample solution pH were investigated and optimized using a response surface methodology employing Box‐Behnken‐design. Under optimized conditions, calibration curves exhibited good linearities over the range of 0.003–10 µg/mL with determination coefficients (R2) ranging from 0.9982 to 0.9999. The method's limits of detection ranged from 0.001 to 0.01 µg/mL. Good repeatability was achieved with relative standard deviations below 4.7%. The developed procedure utilizing the COF adsorbent was successfully applied to determine chlorophenols accurately and precisely in various industrial wastewater samples. [ABSTRACT FROM AUTHOR]

Total oil and grease (TOG) in water is measured in industrial process waters to determine the concentration of petroleum products present. A common application for TOG measurement is to detect a hydrocarbon leak in circulated cooling water systems. A hydrocarbon leak from a heat exchanger has a negative effect on the stable operation of upgrading and refinery units. Detecting and quantifying a hydrocarbon leak is straightforward; however, identifying the source of the leak can be very time consuming and require a lot of trial and error. In this study, a solvent‐free TOG method using ClearShot extractors and Fourier transform infrared spectroscopy (FTIR) was developed and optimized for the quantification of bitumen derived hydrocarbon analytes in water. This was further expanded upon to develop a rapid method for hydrocarbon identification in the cooling water by combining chemical fingerprinting with a discriminant analysis classification model. Following the optimized solvent‐free TOG method, chemical fingerprints for six different hydrocarbon classes in water were analyzed by FTIR. The classification model for these hydrocarbon classes was constructed using a discriminant analysis algorithm with a 100% classification rate at a TOG mass loading greater than 150 μg. The optimized solvent‐free TOG method decreases exposure risk and ergonomic strain for technologists, improving overall safety and environmental performance. The hydrocarbon fingerprinting enables rapid prediction of a leak source which reduces the time and analysis required to isolate a leak as well as reducing the cost and environmental impact associated with blowdown and purge (disposal and treatment) of contaminated water. [ABSTRACT FROM AUTHOR]

Dissolved organic carbon (DOC) in the global oceans is an important long‐term carbon sink. Connections between molecular size, reactivity, and isotopic characteristics show that DOC exists on a continuum from biologically reactive to recalcitrant. The driving mechanisms behind the creation and persistence of recalcitrant DOC remain unknown. We show mean recalcitrant DOC (isolated via solid‐phase extraction; SPE‐DOC) δ13C values are 1.3 ± 0.6‰ lower than mean total DOC δ13C between depth ranges 0–200 m and 2–4 km on three GO‐SHIP Repeat Hydrography cruises. Lowest observed δ13C values correlate with low ∆14C and proximity to deep ocean hydrothermal systems. These data support the hypothesis that reworking of DOC through the microbial carbon pump is a key driver of the ocean's long‐term carbon sink. Mass‐balance modeling shows deep‐ocean DOC not captured by SPE is enriched in 13C, highlighting the need for continued research on non‐retained DOC to predict mechanisms that drive ocean carbon storage. Plain Language Summary: The global oceans play an important role in Earth's climate, and dissolved organic carbon (DOC) (produced by surface ocean photosynthesis) has been recognized as a potential long‐term carbon sink in the deep ocean. However, the mechanisms behind the long‐term sink remain unknown. Recent research has shown that a phenomenon called the microbial carbon pump (MCP) may be a driving force in the production of long‐lasting "recalcitrant" DOC via heterotrophic consumption of nitrogen and phosphorus rich biomolecules and subsequent production of recalcitrant DOC as by‐product. The work presented here shows that this phenomenon, previously recognized on regional scales, may be systematic across the global oceans, indicated by our measurements in the Pacific, Indian, and Southern Oceans. Key Points: Solid‐phase extracted dissolved organic carbon has low isotope signatures relative to bulk dissolved organic carbon in three ocean basinsThis research supports the hypothesis that bacteria drive the storage of recalcitrant organic matter through successive reworkingIsotope measurements show hydrothermal vent influence likely captured in deep‐ocean solid‐phase extracted dissolved organic carbon [ABSTRACT FROM AUTHOR]

Mixed-mode high-performance liquid chromatography (HPLC) is increasingly used for the analysis of ionic and highly hydrophilic drugs, which are difficult to separate by conventional single-mode HPLC. In the former case, chromatographic separation is achieved using one of the several commercially available mixed-mode stationary phases, typically combinations of reversed and ion-exchange phases. Moreover, mixed-mode stationary phases can be used as solid-phase extraction (SPE) sorbents. This review focuses on the recent applications of mixed-mode stationary phases in the chromatographic analysis of bioactive compounds, such as drugs, herbicides, and pesticides. Specifically, we briefly summarize HPLC methods utilizing mixed-mode stationary phases and SPE pretreatment procedures utilizing mixed-mode sorbents developed in the last decade, thus providing a reference work for overcoming the difficulties in analyzing ionized or hydrophilic drugs by conventional reversed-phase chromatography. [ABSTRACT FROM AUTHOR]

In the past few decades, considerable scientific strides have been made in the subject of drug analysis in human biological samples. However, the risk caused by incorrect drug plasma levels in patients still remains an important concern. This review paper attempts to investigate the advances made over the last ten years in common sample preparation techniques (SPT) for biological samples based on solid sorbents, including solid-phase extraction (SPE) and solid-phase micro-extraction (SPME), and in particular in the field of molecularly imprinted polymers (MIPs), including non-stimuli-responsive and stimuli-responsive adsorbents. This class of materials is known as 'smart adsorbents', exhibiting tailored responses to various stimuli such as magnetic fields, pH, temperature, and light. Details are provided on how these advanced SPT are changing the landscape of modern drug analysis in their coupling with liquid chromatography-mass spectrometry (LC-MS) analytical techniques, a general term that includes high-performance liquid chromatography (HPLC) and ultra-high performance liquid chromatography (UHPLC), as well as any variation of MS, such as tandem (MS/MS), multiple-stage (MSn), and high-resolution (HRMS) mass spectrometry. Some notes are also provided on coupling with less-performing techniques, such as high-performance liquid chromatography with ultraviolet (HPLC-UV) and diode array detection (HPLC-DAD) detection. Finally, we provide a general review of the difficulties and benefits of the proposed approaches and the future prospects of this research area. [ABSTRACT FROM AUTHOR]

In this study, several electrospun nanofibers were prepared and characterized, and the electrospun polystyrene/poly-(ether sulfone) nanofiber coated with copper nanoparticles (PS/PES-CuNP nanofibers) was selected and utilized as solid-phase extraction adsorbent. And then, the packed-fiber solid-phase extraction coupled with high-performance liquid chromatography-fluorescence detection method was established for the efficient determination of ochratoxins in foods. With the proposed method, several factors including the type and dosage of nanofibers, sample pH, extraction time, type, and volume of elution solvent were optimized. The results suggested that low limit of detection (0.102–0.126 ng/mL), limit of quantification (0.382–0.436 ng/mL), and recoveries (85.5–111.1%) for ochratoxin A, B, and C with relative standard deviations <7% were achieved. As-synthesized PS/PES-CuNP nanofibers displayed satisfactory potential practical application in the simultaneous pretreatment and determination of mycotoxins in complex matrice samples. [ABSTRACT FROM AUTHOR]

The presence of human and veterinary pharmaceuticals (PhACs) in the environment poses potential risks. To comprehensively assess these risks, robust multiresidual analytical methods are essential for determining a broad spectrum of PhAC classes in various environmental compartments (soil, plants, and soil organisms). This study optimized extraction methods for analyzing over 40 PhACs from various matrices, including soil, lettuce, and earthworms. A four-step ultrasonic extraction method with varying extraction conditions and subsequent solid phase extraction was developed for soil samples. QuEChERS methods were optimized for extracting PhACs from lettuce and earthworm samples, addressing a literature gap in these less-studied matrices. The quantification of PhACs in soil, lettuce, and earthworm extracts was performed using a single LC–MS/MS method. Following thorough method validation, earthworms and lettuce were exposed to a mixture of 27 pharmaceuticals in a soil environment. The method validation results demonstrated the robustness of these methods for a broad spectrum of PhACs. Specifically, 29 out of 42 PhACs were extracted with an average efficiency > 50% and RSD < 30% from the soil; 40 out of 42 PhACs exhibited average efficiency > 50% and %RSD < 30% from the earthworms, while 39 out of 42 PhACs showed average efficiency > 50% and RSD < 30% from the lettuce. Exposure experiments confirmed the viability of these methods for quantifying a diverse range of PhACs in different environmental compartments. This study presents three thoroughly validated methods for determining more than 40 PhACs in diverse matrices, enabling a comprehensive assessment of PhAC dissemination in the environment. [ABSTRACT FROM AUTHOR]

Copyright of Materials & Technologies / Materiali in Tehnologije is the property of Institute of Metals & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This work showcases a novel application of biochar for analytical sample treatment. The carbonaceous material, obtained by pyrolysis of orange peel waste (550°C) without any post-synthesis treatment or functionalization, was thoroughly characterized and easily immobilized on the inner wall of sampling tubes in order to perform a sort of “in-vial” solid-phase extraction (SPE). The as-obtained device was tested for the extraction of seven sexual steroids, as probe water pollutants, from tap, lake, river water and wastewater treatment plant effluent samples spiked with 0.2-5 µg L−1 of each compound. The sorption kinetics profiles showed quantitative uptake from the sample (25 mL) in 20 min contact time, followed by complete elution in pure ethanol (2 mL, 15 min), thanks to the proper balance between sorption affinity and ease of elution. Under the selected conditions, recovery was in the range 60-123 %, with good inter-day precision (RSD 10-18 %, n=3). As evidence of the excellent reproducibility, an overall RSD below 15 % was observed from inter-day inter-batch recovery tests on three individually prepared sampling tubes. The procedure, carried out on a roller mixer, allows 10 samples to be extracted simultaneously, improving the sample throughput. Moreover, reusability tests showed that the same device maintains its efficiency for 10 consecutive sorption/desorption cycles. The greenness assessment, carried out by two dedicated software, further supported the sustainability of this biochar-based sample preparation as an alternative SPE.

Rapid analysis of multiple food allergens is required to confirm the appropriateness of food allergen labelling in processed foods. This study aimed to develop a rapid and reliable method to simultaneously detect trace amounts of seven food allergenic proteins (wheat, buckwheat, milk, egg, crustacean, peanut, and walnut) in processed foods using LC-MS/MS. Suspension-trapping (S-Trap) columns and on-line automated solid-phase extraction were used to improve the complex and time-consuming pretreatment process previously required for allergen analysis using LC-MS/MS. The developed method enabled the simultaneous detection of selected marker peptides for specific proteins derived from seven food ingredients in five types of incurred samples amended with trace amounts of allergenic proteins. The limit of detection values of the method for each protein were estimated to be

ObjectiveTo develop a fully automated method combining solid-phase extraction with ultra-high performance liquid chromatography tandem mass spectrometry for the determination of 52 types of antibiotics in drinking water. MethodsThe water samples were adjusted to pH 2 using phosphoric acid. The antibiotics in the water samples were enriched and purified through solid-phase extraction membrane. Subsequently, the samples underwent two elutions with 10 mL of 5% ammonia methanol, followed by nitrogen-assisted drying to near-dryness. Finally, the volume was adjusted to 1 mL using a 5% methanol aqueous solution for analysis purposes. Separation was achieved using an ACQUITY UPLC BEH C18 chromatographic column (2.1×100 mm, 1.7 μm). A mobile phase consisting of a gradient elution system comprising of 0.1% formic acid-water-0.1% formic acid methanol was employed for this purpose. Mass spectrometry utilized positive ion scan multiple reaction monitoring (MRM) mode. ResultsWithin the range of 0.1 – 100 μg/L, all regression equations obtained for the 52 target analytes exhibited satisfactory linear relationships. The method detection limit ranged from 0.1 to 0.6 ng/L, while the recovery rate varied between 65.1% and 133.3%. Additionally, the relative standard deviation (RSD) ranged from 3.1% to 20.5%. ConclusionThe established method is a simple, rapid, and highly accurate and precise approach for the simultaneous detection of 52 types of antibiotics in drinking water.

A method for simultaneous determination of 176 pharmaceuticals and personal care products (PPCPs) in drinking water samples was established by combining solid-phase extraction (SPE) with ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The water samples were adjusted to pH 7, and then subjected to enrichment and purification using a Cleanert PEP SPE column. After concentration of the eluate with dimethyl sulfoxide (DMSO), the chromatographic separation was carried out on an HSS T3 column (2.1 mm × 150 mm, 1.8 μm) using methanol-0.1% formic acid water (containing 0.2 mmol ammonium acetate) as the mobile phase. The detection was performed in positive and negative ionization switching modes with multiple reaction monitoring (MRM). Methodological validation results showed that good linearity for the 176 PPCPs was achieved in the concentration range of 5–200 ng/mL, with a correlation coefficient higher than 0.99. The limit of quantitation (LOQ) of the method for all the PPCPs was 0.1 ng/mL. The average recoveries of spiked blank samples at three levels (0.1, 0.4 and 1.0 ng/mL) were between 68.0% and 126.7%, with relative standard deviation (RSD) between 1.1% and 10.3% (n = 6). In conclusion, the method established in this study is simple, rapid, reproducible, and highly sensitive, and can meet the requirements of the high-throughput detection of the 176 PPCPs in drinking water sources.

AbstractIn this review, the principles and characteristics of solid-phase extraction (SPE) are discussed. The categories of nanomaterial-based adsorbents namely metal/metal oxides, magnetic nanoparticles, silica-based nanoparticles, two-dimensional (2D) nanomaterials (NMs), polymeric nanoparticles, nanotubes, semiconductor NMs, and nanoporous materials along with their features are discussed followed by evaluating their synthetic strategies. Finally, the application of nanomaterial-based sorbents for extraction and preconcentration of drugs, pesticides, and heavy metals in biological, food, and environmental samples is assessed. Overall, the future of SPE techniques is expected to include advances in downsizing, automation, selectivity, sustainability, and integration with other analytical techniques, resulting in more efficient and effective sample preparation procedures for a variety of applications. [ABSTRACT FROM AUTHOR]

In this paper, a solid phase extraction procedure was developed for the simultaneous extraction of 22 multiclass high-risk pesticides, containing a variety of chemical groups (organophosphate, neonicotinoid, sulfonylurea, strobilurin, triazole, triazine, and acetanilide), from surface water samples. The target analytes extracted on the HLB SPE cartridge, and then eluted with acetonitrile with 5% (v/v) formic acid. The final sample solution was analysed by high-performance liquid chromatography-tandem quadrupole mass spectrometry (HPLC–MS/MS) system. Under optimum conditions, good linearity was obtained for the target pesticides with correlation coefficient greater than 0.99. The limit of quantitation (LOQ) for the 22 pesticides was 0.1 ng/mL. The absolute recoveries of the pesticides from spiked water samples ranged from 70.0% to 121.5%. Relative standard deviations (RSD) for five replicate determinations were below 14.7%. The proposed method has been successfully applied to detect the presence of multiclass pesticides in environmental water samples. [ABSTRACT FROM AUTHOR]

Aim: Currently, no information regarding the sennosides A and B content is provided on bofutsushosan extract products for ethical use. In this study, sennosides A and B in bofutsushosan extract products from eight different pharmaceutical companies and those in bofutsushosan decoction were quantitatively analyzed. Additionally, since it has been reported that sennoside A is unstable to heat, the relationship between the different decoction times of Rhubarb and the total extracted amounts of sennosides A and B was investigated. Finally, nuclear magnetic resonance (NMR)‐based metabolomics analysis was performed on Rhubarb extracts to evaluate the variability in the quality of Rhubarb. Methods: Solutions of bofutsushosan extract products, bofutsushosan decoction, and Rhubarb decoction were subjected to solid‐phase extraction, and then were analyzed using HPLC. The five Rhubarb extracts prepared from five different lots were subjected to NMR‐based metabolomics analysis. Results: The quantities of sennosides A and B varied among the bofutsushosan extract products, with a maximum interproduct variation of approximately five‐fold. Sennosides A and B were not significantly unstable to heat up to 60 min. The five Rhubarb samples were classified into three independent clusters. Conclusion: It is recommended that the quantities of sennosides A and B in Kampo extract products, including Rhubarb, be described in the package insert. When preparing Rhubarb‐containing Kampo medicines, sennosides A and B decomposition can be ignored for decoction times of up to 60 min. Further studies on the biological activity of secondary metabolites other than sennosides A and B are necessary for Rhubarb quality control. [ABSTRACT FROM AUTHOR]

The aim of this study was to develop a kinetic-spectrophotometric method for 2-methyl-4-chlorophenoxy acetic acid (MCPA) determination and apply it for pesticide determination in baby tea and baby food samples, using solid-phase extraction (SPE) followed by the kinetic-spectrophotometric method and the high-performance liquid chromatography (HPLC) method. This method is based on the inhibited effect of MCPA on the oxidation of sulfanilic acid (SA) by hydrogen peroxide in the presence of Co2+ ion as catalyst in alkaline medium. The reaction was monitored spectrophotometrically by measuring the increase in absorbance with time of the reaction product at 368 nm. Under the experimental conditions used, MCPA showed a linear dynamic range of 0.14 to 2.0 μg mL−1, and from 2.0 to 20.00 μg mL−1 with relative standard deviations (RSD) from 1.07 to 4.35%. The limit of detection and the limit of quantification were 0.052 and 0.107 μg mL−1. The method was successfully applied to determination of MCPA residues in baby tea and baby food samples. Solid-phase extraction (SPE) was used for extraction of MCPA from samples using Chromabond® C18 cartridges. The HPLC method was used as a comparative method to verify the results of kinetic method. The results obtained by two different methods showed good agreement. The proposed method is highly sensitive, simple, easy, requires cheap reagents, and leads to good recovery levels. It is linear, precise, and accurate. It can be successfully used for the routine analysis of MCPA in baby tea samples, and baby food samples. [ABSTRACT FROM AUTHOR]

The sample preparation step is pivotal in glycoproteomic analysis. An effective approach in glycoprotein sample preparation involves enriching glycopeptides by solid-phase extraction (SPE) using polar stationary phases in hydrophilic interaction liquid chromatography (HILIC) mode. The aim of this work is to show how different experimental conditions influence the enrichment efficiency of glycopeptides from human immunoglobulin G (IgG) on an aminopropyl-modified SPE column. Different compositions of the elution solvent (acetonitrile, methanol, and isopropanol), along with varying concentrations of elution solvent acidifiers (formic and acetic acid), and different concentrations of acetonitrile for the conditioning and washing solvents (65%, 75%, and 85% acetonitrile) were tested to observe their effects on the glycopeptide enrichment process. Isopropanol proved less effective in enriching glycopeptides, while acetonitrile was the most efficient, with methanol in between. Higher formic acid concentrations in the elution solvent weakened the ionic interactions, particularly with sialylated glycopeptides. Substituting formic acid with acetic acid led to earlier elution of more glycopeptides. The acetonitrile concentration in conditioning and washing solutions played a key role; at 65% acetonitrile, glycopeptides were not retained on the SPE column and were detected in the flow-through fraction. Ultimately, it was proven that the enrichment method was applicable to human plasma samples, resulting in a significant decrease in the abundances of non-glycosylated peptides. To the best of our knowledge, this study represents the first systematic investigation into the impact of the mobile phase on glycopeptide enrichment using an aminopropyl-modified SPE column in HILIC mode. This study demonstrates the substantial impact of even minor variations in experimental conditions, which have not yet been considered in the literature, on SPE-HILIC glycopeptide enrichment. Consequently, meticulous optimization of these conditions is imperative to enhance the specificity and selectivity of glycoproteomic analysis, ensuring accurate and reliable quantification. [ABSTRACT FROM AUTHOR]

Background: Brassinosteroids (BRs) are a class of naturally occurring steroidal phytohormones mediating a wide range of pivotal developmental and physiological functions throughout the plant’s life cycle. Therefore, it is of great significance to determine the content and the distribution of BRs in plants.Regretfully, although a large number of quantitative methods for BRs by liquid chromatography-tandem mass spectrometry (LC-MS/MS) have been reported, the in planta distribution of BRs is still unclear because of their lower contents in plant tissues and the lack of effective ionizable groups in their chemical structures. Methods: We stablished a novel analytical method of BRs based on C18 cartridge solid-phase extraction (SPE) purification, 4-(dimethylamino)-phenylboronic acid (DMAPBA) derivatization, and online valve-switching system coupled with ultrahigh performance liquid chromatography-electro spray ionization-triple quadrupole mass spectrometry (UHPLC-ESI-MS/MS). This method has been used to quantify three structural types of BRs (epibrassinolide, epicastasterone, and 6-deoxo-24-epicastaster one) in different organs of Brassica napus L. (rapeseed). Results: We obtained the contents of three structural types of BRs in various organ tissues of rapeseed. The contents of three BRs in rapeseed flowers were the highest, followed by tender pods. The levels of three BRs all decreased during the maturation of the organs. We outlined the spatial distribution maps of three BRs in rapeseed based on these results, so as to understand the spatial distribution of BRs at the visual level. Conclusions: Our results provided useful information for the precise in situ localization of BRs in plants and the metabolomic research of BRs in future work. The in planta spatial distribution of BRs at the visual level has been studied for the first time. [ABSTRACT FROM AUTHOR]