Search

The influence of varying hydrogen content on the microstructure, mechanical properties, and fracture behavior of the metastable β titanium alloy TB8 after hydrogen charging has been investigated in this study. Several characterization methods, including optical microscopy (OM), x-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), were employed to comprehensively analyze the alloy. The results show that with the addition of hydrogen, hydrogen mainly accumulated at grain boundaries in the form of hydrides. The β phase diffraction peak shifted to a lower angle, which can be attribute to hydrogen-induced lattice distortion. As the hydrogen content increases, γ-TiH hydrides and ε-TiH2 hydrides were observed. Ultimate tensile strength of the alloy firstly increased from 982 MPa to 1636 MPa, and then decreased to 1432 MPa. Uniform elongation decreased from 33% to 19%. Fracture mode transitioned from ductile to brittle with increasing hydrogen. In summary, we hope the outcome of this work could provide important insights toward the hydrogen charging influences the microstructure, mechanical properties, and fracture behavior of the TB8 titanium alloy. [ABSTRACT FROM AUTHOR]

The present study aims to produce novel hybrid metal matrix composite (HMMC's) material using a mixture of reinforcement (basalt, E-glass, and carbon fibers) in long, chopped, and flakes form via Friction Stir Processing (FSP) techniques. Subsequently, the effect of hybrid reinforcement on microstructural evolutions, mechanical performance, and the fracture mechanism of HMMC's was investigated. The results demonstrated that hybrid reinforcement synergistically enhanced the tensile, flexural, and impact performance of FSPed HMMC's compared to monolithic composites (non-hybrid) and received base metal (BM). The long fiber-reinforced hybrid aluminum metal matrix composites (HL) show a ~156% increment in tensile strength and ~196% increment in impact strength, while flakes-reinforced hybrid aluminum metal matrix composites (HF) show a ~101% increment in flexural strength compared to the BM. The field emission scanning electron microscopy (FESEM) analysis demonstrated a homogeneous dispersion of reinforcement and an excellent interfacial bonding of fibers with the aluminum matrix in the fabricated composites. The validation of element distribution and composition within the composites was confirmed using FESEM elemental mapping and energy-dispersive X-ray spectroscopy (EDS) spectrum. [ABSTRACT FROM AUTHOR]