Search

The human nasal cavity develops from birth with size anatomical changes. This study aims to evaluate the flow parameters and particle deposition parameters. Neonatal and infant nasal cavities are developed using MIMICS 21.0, and the flow is evaluated by ANSYS 2021 R2 using CFD to evaluate velocity, pressure, micro- and nanoparticle depositions under sedentary breathing conditions. Neonatal nasal valve velocity was recorded 3.5 times higher compared to the infant for 1.8 LPM and 2.7 times for 3 LPM. Neonatal vestibular depositions up to 10 µm were 6.6%, which increased to 76% for 60 µm for 1.8 LPM and increased to 21.3% for 10 µm and 79% for 60 µm for 1.8 LPM. The neonatal nasal valve showed maximum depositions of around 35% for 20 µm for both flow rates. Maximum depositions of nanoparticles are in the mid-nasal region. Infant nasal cavities deposit around 1% to 2% for nanoparticles below 20 nm for both flow rates. Neonatal overall microparticle depositions doubled with an increase in flow rate up to 10 µm. The overall deposition efficiency of nanoparticles increases 1.5 times with increasing flow rate. This study will help with the medical administration of aerosol-based medications in the patient and age-specific nasal cavity. [ABSTRACT FROM AUTHOR]

Objective: The nasal cavity effectively captures the particles present in inhaled air, thereby preventing harmful and toxic pollutants from reaching the lungs. This filtering ability of the nasal cavity can be effectively utilized for targeted nasal drug delivery applications. This study aims to understand the particle deposition patterns in three age groups: neonate, infant, and adult. Materials and methods: The CT scans are built using MIMICS 21.0, followed by CATIA V6 to generate a patient-specific airway model. Fluid flow is simulated using ANSYS FLUENT 2021 R2. Spherical monodisperse microparticles ranging from 2 to 60 µm and a density of 1100 kg/m3 are simulated at steady-state and sedentary inspiration conditions. Results: The highest nasal valve depositions for the neonate are 25% for 20 µm, for infants, 10% for 50 µm, 15% for adults, and 15% for 15 µm. At mid nasal region, deposition of 15% for 20 µm is observed for infant and 8% for neonate and adult nasal cavities at a particle size of 10 and 20 µm, respectively. The highest particle deposition at the olfactory region is about 2.7% for the adult nasal cavity for 20 µm, and it is <1% for neonate and infant nasal cavities. Discussion and conclusions: The study of preferred nasal depositions during natural sedentary breathing conditions is utilized to determine the size that allows medication particles to be targeted to specific nose regions. [ABSTRACT FROM AUTHOR]

The selection of abrasive material and parameters of the Air-Abrasion device for a particular application is a crucial detail. However, there are no standard recommendations or manuals for choosing these details; the operator must depend on his experience and knowledge of the procedure to select the best possible material and set of parameters. This short review attempts to identify some of the effects that the selection of material and parameters could have on the performance of the Air-Abrasion procedure for a particular application. The material and parameter data are collected from various studies and categorized according to the most popular materials in use right now. These studies are then analyzed to arrive at some inferences on the performance of Air-Abrasion materials and parameters. This review arrives at a few conclusions on the effectiveness of a material and parameter set, and that there is potential for developments in the area of standardizing parameter selection; also, there is scope for further studies on Bio-Active Glass as an alternative to the materials currently used in Air-Abrasion. [ABSTRACT FROM AUTHOR]

AbstractFace cups form a vital component of breathing, assisting with devices that aid in artificial breathing for neonates. This study aims to evaluate the flow parameters in the nasal cavity for two different types of face cups. The neonatal nasal cavity model was developed from CT scans using MIMICS 21.0. Two face cups, one hemispherical and the other anatomical shaped cups are developed around the nasal cavity and the airflow is simulated using ANSYS 2021 R2. Results are compared with a nasal-only model. At the nasal valve region, the highest velocity is seen for the nasal-only model which is 16.3% higher than that of the hemispherical face cup and 15.2% superior to the anatomical-shaped face cup. In addition, the decrease in pressure across the nasal-only model is 7.4 and 6.6% below that of the hemispherical cup and anatomical cup masks. The nasal resistance values across the nasal cavity are the lowest for the nasal-only model, 7.7 and 6.7% lower respectively than the hemispherical and anatomical-shaped cups. There were very minor changes in the flow parameters such as velocity, pressure and wall shear stress when comparing the hemispherical and anatomic-shaped masks for the airflow inside the nasal cavity. [ABSTRACT FROM AUTHOR]

This research addresses the need for enhanced biomaterials by investigating the influence of the NCO/OH ratio on sodium alginate-based polyurethane elastomers(Al-PUEs), offering novel insights into their structural, thermal, mechanical and swelling behavior. Al-PUEs were prepared by blending the chain extenders with key ingredients in a specific molar ratio using aliphatic HMDI and HTPB monomers. The chemical linkages, crystalline behavior, homogeneity, and surface morphology of PUEs were evaluated by FT-IR, XRD, SEM, and EDX analysis. Thermo-mechanical studies were performed using TGA, DSC and tensile testing. Swelling behavior and absorption analysis were analyzed in DMSO and water. The analysis indicated that the hydrophilicity and swelling behavior of the prepared PUEs were affected by the addition of sodium alginate content. The results exhibit the tailor-made network structure of Al-PUEs, resulting in better thermal stability, elasticity of materials via stress-strain behavior and marvelous characteristic features than traditional high-tech yields. Furthermore, the resulting Al-PUEs are potential candidates for biomedical implants., Competing Interests: Declaration of competing interest On behalf of all my co-authors I hereby declare that we have no conflict of interest for the manuscript being submitted for publication to the journal “International Journal of Biological Macromolecules”., (Copyright © 2024 Elsevier B.V. All rights reserved.)