Search

Hydrokinetic arrays, or farms, offer a promising solution to the global energy crisis by enabling cost-effective and environmentally friendly energy generation in locations with water flows. This paper presents research focused on the design and optimization of a Gorlov-type vertical-axis hydrokinetic turbine array for power generation. The study involved (i) numerical simulations using computational fluid dynamics (CFD) software with the six degrees of freedom (6DoF) tool, (ii) optimization techniques such as response surface methodology, and (iii) experimental testing in natural environments. The objective was to develop an efficient system with low manufacturing and maintenance costs. A key finding was that the separation distance between rotors, both along and across the fluid flow, is a critical parameter in designing hydrokinetic arrays. For this study, a triangular array configuration, termed Triframe, was used, consisting of three Gorlov-type turbines with four blades each. The optimization process led to separation distances based on the diameter (D) of the turbines, with 15.9672D along the fluid flow (X) and 4.15719D across the flow (Y). Finally, an experimental scale model of the hydrokinetic array was successfully constructed and characterized, demonstrating the effectiveness of the optimization process described in this study. [ABSTRACT FROM AUTHOR]

The growing global energy demand necessitates a shift towards sustainable sources to mitigate environmental issues and ensure energy security. This work explores the design and optimization of propeller-type hydrokinetic turbines to efficiently harness renewable energy from water currents. Through experimental testing and regression modeling, the research aimed to maximize the power coefficient ( C p ) by determining the optimal values of the number of blades (Z) and the turbine diameter to hub diameter ratio ( d / D ). By correcting for experimental biases, the study elucidates the importance of factors such as the blockage ratio and turbine configuration on its performance. A second-order polynomial regression model, which was validated through analysis of variance, determined that when Z and d / D were set at 4 and 0.15, respectively, the optimal value for Cp was 53.62%. These findings provide valuable insights for optimizing hydrokinetic turbine efficiency, contributing to the advancement of renewable energy technologies. [ABSTRACT FROM AUTHOR]

This work compared the suitability of the k- ϵ standard, k- ϵ RNG, k- ω SST, and k- ω standard turbulence models for simulating a gravitational water vortex hydraulic turbine using ANSYS Fluent. This study revealed significant discrepancies between the models, particularly in predicting vortex circulation. While the k- ϵ RNG and standard k- ω models maintained relatively constant circulation values, the k- ϵ standard model exhibited higher values, and the k- ω SST model showed irregular fluctuations. The mass flow rate stabilization also varied, with the k- ϵ RNG, k- ω SST, and k- ω standard models being stabilized around 2.1 kg/s, whereas the k- ϵ standard model fluctuated between 1.9 and 2.1 kg/s. Statistical analyses, including ANOVA and multiple comparison methods, confirmed the significant impact of the turbulence model choice on both the circulation and mass flow rate. Experimental validation further supported the numerical findings by demonstrating that the k- ω shear stress transport (SST) model most closely matched the real vortex profile, followed by the k- ϵ RNG model. The primary contribution of this work is the comprehensive evaluation of these turbulence models, which provide clear guidance on their applicability to gravitational water vortex hydraulic turbine simulations. [ABSTRACT FROM AUTHOR]

In this work, an experimental analysis of the performance of a cross-flow turbine, commonly referred to as a Michell–Banki turbine (MBT), is carried out for small-scale hydropower production in rural areas located in developing countries to support their social and economic development activities. The study investigates how the efficiency of the MBT is influenced by the presence or absence of a nozzle, along with variations in the internal guide vane (GV) and its angle. The runner had 26 blades that were arranged symmetrically in the periphery between two circular plates. The designed MBT had the ability to generate a maximum of 100 W of power at a water flow rate and a head of 0.009 m3/s and 0.6311 m, respectively. The experimental tests were carried out using a hydraulic bench. The turbine efficiency without the inner GV was found to be higher than that of the turbine with the inner GV; i.e., it was found that the utilization of the GV did not enhance the efficiency of the MBT due to the occurrence of a choking effect. A maximum hydraulic efficiency of 85% was achieved in the turbine without an inner GV in comparison with the efficiency achieved (77%) with this device and an optimum opening angle of the GV of 24° (75% of opening). In this regard, the GV design should be carefully carried out to improve the MBT efficiency. Additionally, the effect of the GV shape on the MBT performance should be experimentally investigated to obtain a more general judgment regarding the role of this device. [ABSTRACT FROM AUTHOR]

Peptides containing the sequences 20RRWQWR25 and 20RRWQWRMKKLG30 derived from Bovine lactoferricin (LfcinB) were synthesized and their antibacterial effect against reference strains and sensitive and resistant clinical isolates of E. coli was evaluated. Tetra-branched multiple antigen peptide (MAP) ((RRWQWR)2-K-Ahx-C)2 exhibited significant antibacterial activity against sensitive, resistant, and multidrug-resistant clinical isolates of E. coli. Peptide 3: RRWQWR-Nal-KKLG; MIC=16 µM, 26[F]: (RRWQWRFKKLG)2-K-Ahx; MIC=15 µM, 17: (RRWQWRFK)2-K-Ahx; MIC=9 µM, and LfcinB (20-25)2: (RRWQWR)2-K-Ahx; MIC=11 µM exhibited the highest antibacterial activity against E. coli strains, with bactericidal effect and haemolytic effect at MIC less than 5% and a therapeutic index >1. A synergistic effect of peptides 26[F] and 17 with ciprofloxacin (CIP) or ceftriaxone (CEF) was observed. Prolonged treatment of E. coli ATCC 25922 with sublethal concentrations of CIP induced resistance in this strain, whereas some peptides did not induce resistance. These peptides can be considered to be promising candidates for treating infections caused by resistant strains of E. coli., (© 2024 Wiley‐VCH GmbH.)