Search

A high‐nuclearity titanium‐oxide cluster (TOC), Ti31O52(OiPr)4Bz24 (denoted as Ti31; Bz=PhCO2), was synthesized via a seed‐mediated synthesis method during the solvothermal reaction of the super‐Keggin cluster Ti17O24(OiPr)20 (denoted as Ti17) and Ti(OiPr)4. Single‐crystal X‐ray diffraction analyses indicate that Ti17 acts as a template for the addition of two Ti7O6 rings to form Ti31. The optical absorption edge of Ti31 slightly shifts to 446 nm, relative to the 419 nm absorption edge of Ti17. Ti31 has much better visible‐light response and charge‐separation properties than Ti17, as confirmed by electrochemical impedance, photoluminescence spectroscopy, and transient photocurrent response. Ti31 also shows much better activity and stability than Ti17 in the solar synthesis of cyclocarbonate through CO2/epoxide cycloaddition. This study not only provides a high‐nuclearity member of the TOC family, but also suggests a potential method to enhance the photocatalytic activity of the known TOCs for more efficient solar energy harvesting. [ABSTRACT FROM AUTHOR]

Plastic pollution is worsening the living conditions on Earth, primarily due to the toxicity and stability of non‐biodegradable plastics (NBPs). Photocatalytic cracking of NBPs is emerging as a promising way to cleave inert C−C bonds and abstract the carbon atoms from these wastes into valuable chemicals and fuels. However, controlling these processes is a huge challenge, ascribed to the complicated reactions of various NBPs. Herein, we summarize recent advances in the CO2 and carbon‐radical‐mediated photocatalytic cracking of NBPs, with an emphasis on the pivotal intermediates. The CO2‐mediated cracking proceeded with indiscriminate C−H/C−C bond cleavage of NBPs and tandem photoreduction of CO2, while carbon‐radical‐mediated cracking was realized by the prior activation of C−H bonds for selective C−C bond cleavage of NBPs. Catalytic generation and conversion of different intermediates greatly depend on the kinds of active species and the structure of photocatalysts under irradiation. Meanwhile, the fate of a specific intermediate is compared with small molecule activation to reveal the key problems in the cracking of NBPs. Finally, the challenges and potential directions are discussed to improve the overall efficiency in the photocatalytic cracking of NBPs. [ABSTRACT FROM AUTHOR]

Expanding the diversity of multi‐macrocyclic nanocarbons, particularly those with all‐benzene scaffolds, represents intriguing yet challenging synthetic tasks. Complementary to the existing synthetic approaches, here we report an efficient and modular post‐functionalization strategy that employs iridium‐catalyzed C−H borylation of the highly strained meta‐cycloparaphenylenes (mCPPs) and an mCPP‐derived catenane. Based on the functionalized macrocyclic synthons, a number of novel all‐benzene topological structures including linear and cyclic chains, polycatenane, and pretzelane have been successfully prepared and characterized, thereby showcasing the synthetic utility and potential of the post‐functionalization strategy. [ABSTRACT FROM AUTHOR]

Sb2S3 has been extensively used as light absorber for photoelectrochemical cell. However, its p‐type nature may result in the formation of Schottky junction with substrates, thus hindering the collection of photogenerated holes. Herein, an ultrathin CuxS layer is successfully engineered as the bottom junction for Sb2S3 for the first time. Capitalizing on its impressive electrical properties and superior optical properties, the CuxS layer exhibits a high work function of 4.90 eV, which causes the upward band bending of p‐type Sb2S3, forming a hole‐transparent structure with ohmic contact. The transparency of the ultrathin CuxS layer enables back‐illumination of the Sb2S3/CuxS platform, facilitating the integration of intricate catalyst layers for photoelectrochemical transformation. When modified with Pt nanoparticles, the photocurrent density reaches −5.38 mA cm−2 at 0 V vs. RHE, marking a fourfold increase compared to the photocathode without CuxS layer. When introducing a molecular hybrid TC‐CoPc@carbon black, a remarkable average photocurrent density of −0.44 mA cm−2 at the overpotential of 0 V is obtained for CO2 reduction reaction, while the photocurrent density is less than −0.03 mA cm−2 without CuxS. [ABSTRACT FROM AUTHOR]

Near infrared (NIR) emitter with circularly polarized phosphorescence (CPP), known as NIR CPP, has emerged as a key part in the research of cutting‐edge luminescent materials. However, it remains a challenge to obtain nanoclusters with NIR CPP activity. Here, we propose an asymmetric transformation approach to efficiently synthesize two pairs of chiral silver nanoclusters (R/S‐Ag29 and R/S‐Ag16) using an achiral Ag10 nanocluster as starting material in the presence of different concentration chiral inducer (R/S)‐1,1′‐binaphthyl‐2,2′‐diyl hydrogenphosphate (R/S‐BNP). R/S‐Ag29, formed in the low‐concentration R/S‐BNP, exhibits a unique kernel‐shell structure consisting of a distorted Ag13 icosahedron and an integrated cage‐like organometallic shell with a C3 symmetry, and possesses a superatomic 6‐electron configuration (1S2|1P4). By contrast, R/S‐Ag16, formed in the high‐concentration R/S‐BNP, features a sandwich‐like pentagram with AgI‐pure kernel. Profiting from the hierarchically chiral structures and superatomic kernel‐dominated phosphorescence, R/S‐Ag29 exhibits infrequent CPP activity in the second near‐infrared (975 nm) region, being the first instance of NIR‐II CPP observed among CPL‐active metal nanoclusters. This study presents a new approach to reduce the difficulty of de novo synthesis for chiral silver nanomaterials, and facilitates the design of CPP‐active superatomic nanoclusters in NIR region. [ABSTRACT FROM AUTHOR]

Herein, two atomically precise silver nanoclusters, Ag54 and Ag33, directed by inner anion templates (CrO42− and/or Cl−), are initially isolated as a mixed phase from identical reactants across a wide temperature range (20–80 °C). Interestingly, fine‐tuning the reaction temperature can realize pure phase synthesis of the two nanoclusters; that is, a metastable Ag54 is kinetically formed at a low temperature (20 °C), whereas such a system is steered towards a thermodynamically stable Ag33 at a relatively high temperature (80 °C). Electrospray ionization mass spectrometry illustrates that the stability of Ag33 is superior to that of Ag54, which is further supported by density functional theory calculations. Importantly, the difference in structural stability can influence the pathway of 1,4‐bis(pyrid‐4‐yl)benzene induced transformation reaction starting from Ag54 and Ag33. The former undergoes a dramatic breakage‐reorganization process to form an Ag31 dimer (Ag31), while the same product can be also achieved from the latter following a noninvasive ligand exchange process. Both the Ag54 and Ag33 have the potential for further remote laser ignition applications. This work not only demonstrates how temperature controls the isolation of a specific phase, but also sheds light on the structural transformation pathway of nanoclusters with different stability. [ABSTRACT FROM AUTHOR]

"Improbable" rotaxanes consisting of interlocked conjugated components represent non‐trivial synthetic targets, not to mention those with all‐benzene scaffolds. Herein, a modular synthetic strategy has been established using an isolable azo‐linked pre‐rotaxane as the core module, in which the azo group functions as a tracelessly removable template to direct mechanical bond formations. Through versatile connections of the pre‐rotaxane and other customizable modules, [2]‐ and [3]rotaxanes derived from all‐benzene scaffolds have been accomplished, demonstrating the utility and potential of the synthetic design for all‐benzene interlocked supramolecules. [ABSTRACT FROM AUTHOR]

Titanium-oxide clusters (TOCs) are well-defined molecular models for TiO2 materials and provide the opportunity to study the structure–activity relationships of TiO2. Here, we report a new Pb-doped TOC, Ti12Pb2, which resembles a two-layer decker of the {TiTi6} structural units of rutile TiO2 with two Ti4+ ions replaced by two Pb2+ ions. Its electronic structure, photoresponse, and photocatalytic performances were investigated and compared with those of the Ti14 cluster, which is isostructural to Ti12Pb2. Our results indicate that Pb2+ does not affect the electronic structure, but it greatly enhances the photocatalytic activity by improving the charge-separation and interfacial charge-transfer properties of the TOC. The successful synthesis of Ti12Pb2 highlights the roles of closed-shell heterometal ions in the construction of new TOCs. Our mechanism may be an inspiration for understanding the structure–activity relationships of closed-shell heterometal-doped TiO2. [ABSTRACT FROM AUTHOR]

A cryptand-like Ti-coordination compound, namely Ti12Cs, comprising two Ti6-salicylate cages and hosting two Cs+ ions, was synthesized by the solvothermal method. It exhibits strong visible-light absorption with an absorption band edge of 652 nm, attributed to the electron transition from salicylate ligands to Ti ions. Electrochemical impedance, visible-light transient photocurrent response, and photoluminescence spectra confirm that Ti12Cs has excellent visible-light response and charge-separation properties. Ti12Cs can be used as a heterogeneous and recyclable photocatalyst for CO2/epoxide cycloaddition, with high utilization efficiency of visible-light under mild conditions. The mechanism investigation points to a synergistic effect of photocatalysis and Lewis acid catalysis. [ABSTRACT FROM AUTHOR]

Photocatalytic redox reactions are important for synthesizing fine chemicals from olefins, but the limited lifetime of radical cation intermediates severely restricts semiconductor photocatalysis efficiency. Here, we report that Ag3PO4 can efficiently catalyze intramolecular and intermolecular [2 + 2] and Diels-Alder cycloadditions under visible-light irradiation. The approach is additive-free, catalyst-recyclable. Mechanistic studies indicate that visible-light irradiation on Ag3PO4 generates holes with high oxidation power, which oxidize aromatic alkene adsorbates into radical cations. In photoreduced Ag3PO4, the conduction band electron (eCB−) has low reduction power due to the delocalization among the Ag+-lattices, while the particle surfaces have a strong electrostatic interaction with the radical cations, which considerably stabilize the radical cations against recombination with eCB−. The radical cation on the particle's surfaces has a lifetime of more than 2 ms, 75 times longer than homogeneous systems. Our findings highlight the effectiveness of inorganic semiconductors for challenging radical cation-mediated synthesis driven by sunlight. Photoredox catalysis is an important approach for synthesizing fine chemicals from olefins, but the limited lifetime of radical cation intermediates severely restricts the efficiency. Here, the authors report that Ag3PO4 can efficiently catalyze intramolecular and intermolecular [2 + 2] and Diels–Alder cycloadditions under visible-light irradiation. [ABSTRACT FROM AUTHOR]

Exploration of molybdenum complexes as homogeneous hydrogenation catalysts has garnered significant attention, but hydrogenation of unactivated olefins under mild conditions are scarce. Here, we report the synthesis of a molybdenum complex, [Cp*Mo(Ph2PC6H4S−CH = CH2)(Py)]+ (2), which exhibits intriguing reactivity toward C2H2 and H2 under ambient pressure. This vinylthioether complex showcases efficient catalytic activity in the hydrogenation of various aromatic and aliphatic alkenes, demonstrating a broad substrate scope without the need for any additives. The catalytic pathway involves an uncommon oxidative addition of H2 to the cationic Mo(II) center, resulting in a Mo(IV) dihydride intermediate. Moreover, complex 2 also shows catalytic activity toward C2H2, leading to the production of polyacetylene and the extension of the vinylthioether ligand into a pendant triene chain. Exploration of molybdenum complexes as homogeneous hydrogenation catalysts has garnered significant attention, but hydrogenation of unactivated olefins under mild conditions are scarce. Here, the authors report the synthesis of a cationic Mo(II) complex, which exhibits intriguing reactivity toward C2H2 and H2 under ambient pressure. [ABSTRACT FROM AUTHOR]

Polyoxometalates (POMs) represent crucial intermediates in the formation of insoluble metal oxides from soluble metal ions, however, the rapid hydrolysis‐condensation kinetics of MoVI or WVI makes the direct characterization of coexisted molecular species in a given medium extremely difficult. Silver nanoclusters have shown versatile capacity to encapsulate diverse POMs, which provides an alternative scene to appreciate landscape of POMs in atomic precision. Here, we report a thiacalix[4]arene protected silver nanocluster (Ag72b) that simultaneously encapsulates three kinds of molybdates (MoO42−, Mo6O228− and Mo7O258−) in situ transformed from classic Lindqvist Mo6O192−, providing more deep understanding on the structural diversity and condensation growth route of POMs in solution. Ag72b is the first silver nanocluster trapping so many kinds of molybdates, which in turn exert collective template effect to aggregate silver atoms into a nanocluster. The post‐reaction of Ag72b with AgOAc or PhCOOAg produces a discrete Ag24 nanocluster (Ag24a) or an Ag28 nanocluster based 1D chain structure (Ag28a), respectively. Moreover, the post‐synthesized Ag28a can be utilized as potential ignition material for further application. This work not only provides an important model for unlocking dynamic features of POMs at atom‐precise level but also pioneers a promising approach to synthesize silver nanoclusters from known to unknown. [ABSTRACT FROM AUTHOR]

Axially chiral indoline‐based scaffolds are virtually universal in biological and pharmaceutical compounds. In this study, we demonstrate the Rh‐catalyzed asymmetric [2 + 2 + 2] cycloaddition of 1,6‐enynes with steric hindered N‐alkynyl indoles, which enables simultaneous construction of both axial and central chirality, containing a quaternary carbon center, in one step. Notable features of these reactions include excellent chemo‐, regio‐, diastereo‐ and enantioselectivity, 100% atom‐economy, easily available SEGPHOS ligand, and mild conditions. [ABSTRACT FROM AUTHOR]

Immobilizing molecular catalysts on electro‐conductive supports (for example, multi‐walled carbon nanotubes, CNTs) represent a promising way to well‐defined catalyst/support interfaces, which has shown appreciable performance for catalytic transformation. However, their full potential is far from achieved due to insufficient utilization of the intrinsic activity for each immobilized molecular catalyst, especially at loadings that should allow decent current densities. In the present work, we discover host–guest interaction between tetra‐crown ether substituted cobalt phthalocyanine and metal ions, for example K+ ions, not only eliminate catalyst aggregation at immobilization procedures but also reinforce catalyst/support interactions by additional electrostatic attractions under operational conditions. Through simple dip‐coating procedures, a successful single molecular dispersion is achieved. Such a catalyst/electrode interface is stable and can selectively catalyze CO2‐to‐CO conversion with Faradaic efficiency over 96%. Importantly, this interface maintains an almost unchanged turnover frequency (TOF) across all loading conditions, implying a full utilization of the intrinsic activity of supported molecular catalysts. Therefore, a simultaneous achievement of high TOF and high current density (TOF of 111 s−1 at 38 mA cm−2) is achieved, in an aqueous H‐type electrolyzer at an overpotential of 570 mV. [ABSTRACT FROM AUTHOR]

The established capability of anion templates in precisely manipulating the size, geometry, and function of metal clusters is well acknowledged. However, the development of a systematic methodology for orchestrating the assembly of silver clusters, particularly those encompassing multiple distinct types of anion templates, remains elusive due to the formidable synthetic challenge. In this work, we report two novel silver clusters, Ag57 and Ag72, using two and three different anion templates, respectively. Ag57 features a gyroscope-like monovalent cation with an Ag 3 triangle core sandwiched by one [SiW 9 O 34 ] 10- and a triad of Cl - anion templates. By intentionally introducing the third anion template, SO 4 2- , the structure is expanded to the unprecedented Ag72 (with 15 silver atoms epitaxially grown on top of Ag57) resembling a tumbler, inside of which two Ag 3 layers are laminated by one [SiW 9 O 34 ] 10- , seven Cl - and one SO 4 2- anion templates in parallel with respect to longitudinal orientation. It is noteworthy that Ag72 exhibits remarkable structural complexity and represents a pioneering achievement as the first silver cluster incorporating three distinct types of anion templates. In addition, Ag72 demonstrates a significant advantage over Ag57, particular in terms of applications such as luminescent thermometers and remote laser ignition. This work not only broadens the horizon for precise control of the silver cluster structures through the integration of multiple types of hetero-anions but also lays a solid foundation for potential optical applications in the future., (© 2024 Wiley-VCH GmbH.)

Transition metal carbyne complexes are of fundamental importance in carbon-carbon bond formation, alkyne metathesis, and alkyne coupling reactions. Most reported iron carbyne complexes are stabilized by incorporating heteroatoms. Here we show the synthesis of bioinspired FeMo heterobimetallic carbyne complexes by the conversion of C 2 H 2 through a diverse series of intermediates. Key reactions discovered include the reduction of a μ-η 2 :η 2 -C 2 H 2 ligand with a hydride to produce a vinyl ligand (μ-η 1 :η 2 -CH = CH 2 ), tautomerization of the vinyl ligand to a carbyne (μ-CCH 3 ), and protonation of either the vinyl or the carbyne compound to form a hydrido carbyne heterobimetallic complex. Mechanistic studies unveil the pivotal role of H 2 O as a proton shuttle, facilitating the proton transfer that converts the vinyl group to a bridging carbyne., (© 2024. The Author(s).)