Search

Poly(amic ‍acid) ‍nanoparticles ‍prepared ‍by ‍‍precipitation ‍polymerization with a dispersant were evaluated by small-angle X-ray scattering (SAXS) and field-emission scanning electron microscopy (FE-SEM). The particle size evaluation of poly(amic acid) nanoparticles in the liquid phase by SAXS was performed to gain insight into the size control of poly(amic acid) nanoparticles, and showed good agreement with visual observation by FE-SEM, explaining the effect of the dispersant in obtaining polyimide nanoparticles with small particle size. This indicates that the particle size is maintained without change during the solvent evaporation process. The polyamide nanoparticles controlled by the dispersant effect maintained their size after imidization, and polyimide nanoparticles with a minimum radius of about 60 nm were prepared.

Abstract Gas marbles are a new family of particle‐stabilized soft dispersed system with a soap bubble‐like air‐in‐water‐in‐air structure. Herein, stimulus‐responsive character is successfully introduced to a gas marble system for the first time using polymer particles carrying a poly(tertiary amine methacrylate) (pKa ≈7) steric stabilizer on their surfaces as a particulate stabilizer. The gas marbles exhibited long‐term stability when transferred onto the planar surface of liquid water, provided that the solution pH of the subphase is basic and neutral. In contrast, the use of acidic solutions led to immediate disintegration of the gas marbles, resulting in release of the inner gas. The critical minimum solution pH required for long‐term gas marble stability correlates closely with the known pKa value for the poly(tertiary amine methacrylate) stabilizer. It also demonstrates amphibious motions of the gas marbles.

Abstract Liquid marbles (LMs) are liquid droplets in gaseous phase, which are generally millimeter size, coated by solid particles. In this study, how wide and high LMs can be fabricated is investigated. Polyhedral LMs are fabricated using polymer plates with millimeter to meter sizes as a stabilizer and water as an inner liquid. Rectangular LMs with widths exceeding 1 m, the largest width ever reported, can be successfully fabricated. The height of the LMs is found to be subject to restriction by the hydrostatic pressure and cubic LMs with heights of up to 5 mm, which is the maximum height limit for LMs stabilized with nano/micrometer‐sized particles, are fabricated. Reduction of the hydrostatic pressure by changing the LM shape from cube to pyramid and introduction of particle‐stabilized bubble into the LM enabled the increase of height of the LM up to 9.8 mm, the highest height ever reported. Investigation using non‐aqueous liquids as an inner liquid confirmed that the longer the capillary length, the higher the maximum possible height of LMs. Finally, the polyhedral LMs are demonstrated to function as a microreactor for silver mirror reaction and chemical oxidative polymerization, resulting in the formation of Janus polymer plates.