Search

A theoretical approach was applied to study the vibration of simple-supported submerged horizontal plate. The derived analytical solution was used to determine natural frequencies for a horizontal plate vibrating in fluid. The investigations were conducted for a very wide range of material density and elasticity modulus covering all materials used in engineering practice. Analysis shows that plate vibration frequency decreases with increasing plate width and draft, and decreases with decreasing plate thickness. Moreover, the results show that a substantial effect on vibration of submerged plate has mass of water above plate. The results also show that plate vibration frequency decreases with increasing plate material density and decreases with decreasing elasticity modulus. The dominant factors affecting the vibration of the submerged plate are the plate width, the plate thickness, and elasticity modulus. For moderate and low values of elasticity modulus, vibration frequency is becoming lower than frequency of water waves. This is very important because wave frequencies overlap with the natural plate vibration frequencies, which may lead to resonance and failure of a structure. The problem is that the overlap of plate vibration frequencies and wave frequencies occurs for very wide range of wave and plate parameters. Laboratory experiments confirm theoretical results. [ABSTRACT FROM AUTHOR]

Significant wave height (H s) is a critical parameter in the design, operation, and maintenance of nearshore and offshore wind and wave farms. In this study, the original pyramid neural network (PNN) was introduced and applied to predict H s for North Sea renewable energy farms. The performance of PNN was compared with state-of-the-art algorithms. The results show that the machine learning (ML) models trained by the network datasets can accurately predict Hs at any point of nearshore or offshore energy farms, significantly reducing wave monitoring costs. The PNN models predict H s with high accuracy. The results predicted by PNN, with SRMSE of 0.256 and R 2 of 0.873, are more accurate than the corresponding results obtained by the deep neural network (DNN) model, which show that PNNs with their far simpler structures and lower number of parameters are attractive alternatives for complex and time-consuming DNN models. The ensemble of regular models, with SRMSE of 0.247, is ranked as the most accurate method. The results also show that the applied state-of-the-art algorithms including MLR, SNN, DNN, ANFIS, and SVR models predict non-physical negative values of H s. The PNNs developed in this study predict H s with positive values. Moreover, the analysis shows that the scatter of the results obtained by the derived nonlinear models is less pronounced than the scatter of corresponding results obtained by other methods. The results also show that to evaluate the performance of nonlinear ML methods for large datasets, the analysis of standard statistical indices is not sufficient. For large datasets standard statistical indices provide inadequate or insufficient information and additional calculations, and statistical analysis are required. • The pyramid neural network (PNN) was introduced. • The performance of PNN was analyzed in predicting significant wave height (H s) for North Sea renewable energy farms. • The PNN with fewer unknown parameters has the potential to deliver results even superior to those of a deep neural network. • Even the trained models can predict the H s of neighboring farms. [ABSTRACT FROM AUTHOR]