Search

The drying behavior of monodisperse colloidal films, with a focus on the influence of process variables on film microstructures, is explored via Brownian dynamics (BD) simulations. In our model, hard-sphere colloidal particles are dispersed in a Newtonian liquid with an initial particle volume fraction of 0.1. The effects of the drying rate and sedimentation on the evolving microstructures are systematically investigated using two dimensionless numbers: the Péclet number (Pe), which represents the competition between evaporation and diffusion, and the sedimentation number (Ns), which reflects the relative influence of sedimentation on evaporation. First, we analyze the local particle volume fraction and film structure at various Pe and Ns. As Pe increases, particle accumulation occurs near the liquid–gas interface, whereas a high Ns promotes dense packing near the substrate owing to sedimentation. The BD simulation results, viz. the local volume fraction profiles and drying regime maps, are in good agreement with those of the continuum model proposed by Wang and Brady. Structural analysis of the dried films reveals that at a low Pe (Pe = 0.1), a face-centered cubic (FCC) structure dominates, primarily independent of the sedimentation effects. In contrast, a high Pe leads to hexagonal close-packed or amorphous structure formation. Notably, at intermediate drying rates (Pe = 10), an increase in Ns promotes additional FCC ordering in the final film structure. Our study provides new insights into the hitherto underexplored role of sedimentation in the structural evolution of drying colloidal films, revealing the mechanisms of drying-induced assembly in colloidal systems. [ABSTRACT FROM AUTHOR]

The structural relaxation dynamics of conventionally prepared bulk glass of N,N′-bis(3-methylphenyl)-N,N′-diphenyl-benzidine (TPD) was measured by differential scanning calorimetry. The calorimetric data were quantitatively described in terms of the Tool–Narayanaswamy–Moynihan (TNM) model. The TNM parameters were evaluated using a combination of linearization and non-linear optimization methodologies: h*/R = 109.5 kK, ln(A/s) = −321, β = 0.37, x = 0.64. In addition, the TNM phenomenology was used to describe recently reported normalized thickness data of stable and aged thin TPD films measured by ellipsometry. The structural relaxation was found to proceed at a markedly higher rate in these thin films prepared by the physical vapor deposition compared to that of conventional bulk glass. This feature appears to be associated with the significantly narrower distribution of relaxation times (β ≅ 0.8) observed for stable thin film in "as-deposited" form with uniquely dense molecular packing. Interestingly, very similar attributes of the relaxation kinetics were also found in the aged thin film with a previously erased thermal history associated with the deposition. [ABSTRACT FROM AUTHOR]

The dynamics of lysozyme is probed by attaching –SCN to all alanine residues. The one-dimensional infrared spectra exhibit frequency shifts in the position of the maximum absorption of 4 cm−1, which is consistent with experiments in different solvents and indicates moderately strong interactions of the vibrational probe with its environment. Isotopic substitution 12C → 13C leads to a redshift by −47 cm−1, which agrees quantitatively with experiments for CN-substituted copper complexes in solution. The low-frequency, far-infrared part of the protein spectra contains label-specific information in the difference spectra when compared with the wild type protein. Depending on the position of the labels, local structural changes are observed. For example, introducing the –SCN label at Ala129 leads to breaking of the α-helical structure with concomitant change in the far-infrared spectrum. Finally, changes in the local hydration of SCN-labeled alanine residues as a function of time can be related to the reorientation of the label. It is concluded that –SCN is potentially useful for probing protein dynamics, both in the high-frequency part (CN-stretch) and in the far-infrared part of the spectrum. [ABSTRACT FROM AUTHOR]

In dense particle systems, the coupling of rotation and translation motion becomes intricate. Here, we report the results of confocal fluorescence microscopy where simultaneous recording of translational and rotational particle trajectories from a bidisperse colloidal dispersion is achieved by spiking the samples with rotational probe particles. The latter consist of colloidal particles containing two fluorescently labeled cores suited for tracking the particle's orientation. A comparison of the experimental data with event driven Brownian simulations gives insights into the system's structure and dynamics close to the glass transition and sheds new light onto the translation–rotation coupling. The data show that with increasing volume fractions, translational dynamics slows down drastically, whereas rotational dynamics changes very little. We find convincing agreement between simulation and experiments, even though the simulations neglect far-field hydrodynamic interactions. An additional analysis of the glass transition following mode coupling theory works well for the structural dynamics but indicates a decoupling of the diffusion of the smaller particle species. Shear stress correlations do not decorrelate in the simulated glass states and are not affected by rotational motion. [ABSTRACT FROM AUTHOR]

Halide perovskite nanocrystals are at the forefront of materials research due to their remarkable optoelectronic properties and versatile applications. While their lattice structure and optical properties have been extensively investigated for the structure–property correlation, their lattice dynamics, the physical link between the lattice structure and optoelectronic properties, has been much less visited. We report the evolution of structural dynamics of a series of cesium lead halide perovskite nanocrystals whose size and morphology are systematically varied by synthesis temperature. Low-frequency Raman spectroscopy uncovers the nanocrystals' structural dynamics, including a relaxational spectral continuum from ligand librations and a phonon spectrum evolving with nanocrystal size. As the size of nanocrystals increases, their phonon spectrum becomes more intense, and their spectral weights redistribute with new first- and second-order modes being activated. The linewidth of the observed phonon modes generally broadens as the nanocrystal grows larger, an interesting deviation from the established phonon confinement model. We suggest that strong confinement and truncation of the lattice and ligands anchoring on the surface might lead to pinning of the lattice dynamics at nanoscale. These findings offer new insights into the bulk–nano-transition in halide perovskite soft semiconductors. [ABSTRACT FROM AUTHOR]

Cooperativity is essential for the proper functioning of numerous proteins by allosteric interactions. Hemoglobin from Scapharca inaequivalvis (HbI) is a homodimeric protein that can serve as a minimal unit for studying cooperativity. We investigated the structural changes in HbI after carbon monoxide dissociation using time-resolved resonance Raman spectroscopy and observed structural rearrangements in the Fe–proximal histidine bond, the position of the heme in the pocket, and the hydrogen bonds between heme and interfacial water upon ligand dissociation. Some of the spectral changes were different from those observed for human adult hemoglobin due to differences in subunit assembly and quaternary changes. The structural rearrangements were similar for the singly and doubly dissociated species but occurred at different rates. The rates of the observed rearrangements indicated that they occurred synchronously with subunit rotation and are influenced by intersubunit coupling, which underlies the positive cooperativity of HbI. [ABSTRACT FROM AUTHOR]

Pinning particles at the equilibrium configuration of the liquid is expected not to affect the structure and any property that depends on the structure while slowing down the dynamics. This leads to a breakdown of the structure dynamics correlation. Here, we calculate two structural quantities: the pair excess entropy, S2, and the mean field caging potential, the inverse of which is our structural order parameter (SOP). We show that when the pinned particles are treated the same way as the mobile particles, both S2 and SOP of the mobile particles remain the same as those of the unpinned system, and the structure dynamics correlation decreases with an increase in pinning density, "c." However, when we treat the pinned particles as a different species, even if we consider that the structure does not change, the expression of S2 and SOP changes. The microscopic expressions show that the interaction between a pinned particle and a mobile particle affects S2 and SOP more than the interaction between two mobile particles. We show that a similar effect is also present in the calculation of the excess entropy and is the primary reason for the well-known vanishing of the configurational entropy at high temperatures. We further show that, contrary to the common belief, the pinning process does change the structure. When these two effects are considered, both S2 and SOP decrease with an increase in "c," and the correlation between the structural parameters and the dynamics continues even for higher values of "c." [ABSTRACT FROM AUTHOR]

Revived attention in black phosphorus (bP) has been tremendous in the past decade. While many photoinitiated experiments have been conducted, a cross-examination of bP's photocarrier and structural dynamics is still lacking. In this article, we provide such analysis by examining time-resolved data acquired using optical transient reflectivity and reflection ultrafast electron diffraction, two complementary methods under the same experimental conditions. At elevated excitation fluences, we find that more than 90% of the photoinjected carriers are annihilated within the first picosecond (ps) and transfer their energy to phonons in a nonthermal, anisotropic fashion. Electronically, the remaining carrier density around the band edges induces a significant interaction that leads to an interlayer lattice contraction in a few ps but soon diminishes as a result of the continuing loss of carriers. Structurally, phonon–phonon scattering redistributes the energy in the lattice and results in the generation of out-of-plane coherent acoustic phonons and thermal lattice expansion. Their onset times at ∼6 ps are found to be in good agreement. Later, a thermalized quasi-equilibrium state is reached following a period of about 40–50 ps. Hence, we propose a picture with five temporal regimes for bP's photodynamics. [ABSTRACT FROM AUTHOR]

The photochemical dynamics of the acetic acid and trifluoro-acetic acid dimers in hexane are studied using time-resolved infrared absorption spectroscopy and ab initio electronic structure calculations. The different hydrogen bond strengths of the two systems lead to changes in the character of the accessed excited states and in the timescales of the initial structural rearrangement that define the early time dynamics following UV excitation. The much stronger hydrogen bonding in the acetic acid dimer stabilizes the system against dissociation. Ground state recovery is mediated by a structural buckling around the hydrogen bond itself with no evidence for excited state proton transfer processes that are usually considered to drive ultrafast relaxation processes in hydrogen bonded systems. The buckling of the ring leads to relaxation through two conical intersections and the eventual reformation of the electronic and vibrational ground states on a few picosecond timescale. In trifluoro-acetic acid, the weaker hydrogen bonding interaction means that the dimer dissociates under similar irradiation conditions. The surrounding solvent cage restricts the full separation of the monomer components, meaning that the dimer is reformed and returns to the ground state structure via a similar buckled structure but over a much longer, ∼100 ps, timescale. [ABSTRACT FROM AUTHOR]

We present the simulation of the photochemical dynamics of cyclobutanone induced by the excitation of the 3 s Rydberg state. For this purpose, we apply the complete active space self-consistent field method together with the spin–orbit multireference configuration interaction singles treatment, combined with the trajectory surface hopping for the inclusion of nonadiabatic effects. The simulations were performed in the spin-adiabatic representation, including nine electronic states derived from three singlet and two triplet spin-diabatic states. Our simulations reproduce the two previously observed primary dissociation channels: the C2 pathway yielding C2H4 + CH2CO and the C3 pathway producing c-C3H6 + CO. In addition, two secondary products, CH2 + CO from the C2 pathway and C3H6 from the C3 pathway, both of them previously reported, are also observed in our simulation. We determine the ratio of the C3:C2 products to be about 2.8. Our findings show that most of the trajectories reach their electronic ground state within 200 fs, with dissociation events finished after 300 fs. We also identify the minimum energy conical intersections that are responsible for the relaxation and provide an analysis of the photochemical reaction mechanism based on multidimensional scaling. Furthermore, we demonstrate a minimal impact of triplet states on the photodissociation mechanism within the observed timescale. In order to provide a direct link to experiments, we simulate the gas phase ultrafast electron diffraction patterns and connect their features to the underlying structural dynamics. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new seismic metamaterial (SM) that can cover the main frequency range of earthquakes by introducing curved boundaries on a square cross-section and reducing the contact area between adjacent cells, which results in a wide bandgap at very low frequencies. The vibration modes at the edge of the first bandgap are analyzed, and the effects of the geometric and material parameters of the rubber on the first bandgap are studied. Meanwhile, vibration experiments are performed. Finally, finite structural dynamics response analysis is performed. The results show that the structure has excellent damping performance in low frequency band. At the same time, it can achieve effective attenuation for Oroville, Gilroy, and Corralitos earthquakes, which has potential applications in the field of seismic isolation and attenuation of buildings. [ABSTRACT FROM AUTHOR]

Due to the high vibration sensitivity, the flexible composite structure is prone to vibration and structural deformation, thus it is necessary to study active vibration control to improve its performance. Based on the idea of the PID control and LQR control, a PID-LQR hybrid controller is proposed in this article. It is proved that the hybrid controller has better control performance by simulating the structural vibration response under various excitation conditions. Finally, the effectiveness of the hybrid controller is verified by the active control experiment, and the vibration response is reduced by about 31.55% after control. [ABSTRACT FROM AUTHOR]

This paper presents a novel Flexnertia metastructure concept to perform vibration suppression through coupling rotational inertia to structural flexural motion. Theoretical analysis and experimental test of the proposed metastructure with emphasis on dissipating structural flexural motion is exhibited, showing vibration control performance. The experimental and numerical results are in good agreement, both confirming that the average overall response of the metastructure is significantly reduced. The attenuation becomes most pronounced in the low-frequency range where structures tend to suffer most due to high response around the regime of the first flexural modes. [ABSTRACT FROM AUTHOR]

Structural modal identification is generally implemented within a dynamic framework, requiring multidisciplinary knowledge and adequate operational experience. This preliminary study attempts to explore an easy-to-handle quasi-static alternative method for dynamics-based modal identification of beam-type structures. Acceleration time-history data are replaced by quasi-static deflections induced by slow moving loads. A concept of quasi-static deflection influence surface is proposed based on the theory of influence lines and the principle of virtual work. Its analytical expression is simplified into a deflection matrix by choosing specific points on the surface according to deflection measurement coordinates. The matrix form is divided by external loads to obtain a generalised quasi-static flexibility matrix, which is used to replace the inversion of the global stiffness matrix in the modal eigenvalue equation. The lumped-mass method is also employed to establish the mass matrix. Subsequently, the eigenvalue equation is analytically solved seeking for modal frequencies and mode shapeswithout performing modal tests. The feasibility of the proposed method has been successfully verified against three experimental examples including a continuous box girder with variable cross sections. It was observed that the modal frequencies and mode shapes estimated by the proposed method were very close to those given by the dynamically modal tests. [ABSTRACT FROM AUTHOR]

The brain has the powerful ability to transform experiences into anatomic maps and continuously integrate massive amounts of information to form new memories. The manner in which the brain performs these processes has been investigated extensively for decades. Emerging reports suggest that dendritic spines are the structural basis of information storage. The complex orchestration of functional and structural dynamics of dendritic spines is associated with learning and memory. Owing to advancements in techniques, more precise observations and manipulation enable the investigation of dendritic spines and provide clues to the challenging question of how memories reside in dendritic spines. In this review, we summarize the remarkable progress made in revealing the role of dendritic spines in fear memory and the techniques used in this field. [ABSTRACT FROM AUTHOR]

This study uses a time-domain simulation to investigate the effect of aerodynamic damping on a freestanding bridge tower under the joint action of wind and wave loads. The physical model of the bridge tower, which has been tested in laboratory, is numerically reconstituted considering structural nonlinearities obtained from free oscillation tests. Random wind fields are generated using the harmonic superposition method, and the wind flow characteristics, such as mean wind velocity and turbulence intensity, are identified based on the data collected in the laboratory. The wave loads measured at the bottom of the foundation during the experimental model tests are used for the simulation. The dynamic responses of the tower under the joints action of wind and wave loads are successfully simulated. A clear reduction in structural vibration in the wave-controlled region is confirmed by simulation results. Further numerical investigation indicates that an increase in the mean wave velocity produces additional aerodynamic damping in the structural motion system, which significantly dampens the responses of the wave-induced vibration. A simple method for determining the dynamic responses of a bridge tower under the joint action of wind and wave loads, using the data obtained from wind- and wave-only cases, is proposed. [ABSTRACT FROM AUTHOR]

The present paper investigates in-plane and out-of-plane vibrations of laminated composite beams with through-the-width delamination based on the first-order shear deformation theory. The finite element method is adopted to obtain the numerical results, and the energy approach is used to acquire the stiffness and mass matrices. The dynamic contact condition based on the physically real mode of vibration is introduced to satisfy the non-penetration condition. The time-dependent equations have been solved using the Newmark algorithm. Finally, the natural frequencies for in-plane and out-of-plane vibrations and the beam's time response under nonmoving harmonic load and moving point load with constant velocity are obtained. The results of the present study are verified by comparing them with those available in the literature. It is worth noting that the delaminated beam's vibration modes in all directions, i.e., axial, in-plane bending, and out-of-plane bending modes, have been obtained in the present study. [ABSTRACT FROM AUTHOR]

Through a combination of the methods of theoretical review and historical-narrative analysis, this study seeks to unveil the main catalysts of the Turkish Revolution by addressing its structural and subjective dynamics in tandem. The literature lacks a theoretically-guided and systematic study of the Turkish Revolution, which marked its centenary in 2023—a significant gap that this paper seeks to fill. The article also contributes to the broader field of revolution studies by presenting an integrated framework that transcends the current fragmented state of prevailing theories. Based on a critical synthesis of revolution theories, the first part of our empirical analysis focuses on the structural dynamics underpinning the Turkish Revolution, with special emphasis on two chief factors: administrative and socio-economic breakdown. Demonstrating that the mere existence of class-structural strains and mass grievances does not automatically trigger revolutionary action, the second part reveals how the Revolution unfolded through a convergence of mediating factors associated with collective agency, namely leadership and ideational dynamics. [ABSTRACT FROM AUTHOR]

The bar and hinge framework uses truss elements and rotational springs to efficiently model the structural behaviour of origami. The framework is especially useful to investigate origami metamaterials as they have repeating geometry, which makes conventional finite element simulations very expensive due to a large number of degrees of freedom. This work proposes improvements to the parameters of bar and hinge model within the context of structural dynamics, specifically modal analysis under small deformations, which has not been carried out previously in the literature. A range of low-frequency modes involving origami folding and panel bending deformations that can be accurately captured by the bar and hinge framework are identified. Within this range, bar and hinge parameters like the lumped masses and the rotational spring stiffness values are derived using conservation laws and finite element tests. The best among the proposed schemes is found to predict natural frequencies of the considered origami structures to within 10% maximum error, improving the accuracy by more than three times from existing schemes. In most cases, the errors in natural frequencies are less than 5%. This article is part of the theme issue 'Origami/Kirigami-inspired structures: from fundamentals to applications'. [ABSTRACT FROM AUTHOR]

This study focuses on the analytical identification and quantification of one type of spurious responses in the context of response history analysis. The spurious response is caused by linear interpolation of input loads. Through analytical derivations and numerical simulations, it is shown that the identified spurious response is fully caused by the interpolation and can significantly affect both damping and inertial forces. Furthermore, the spurious response is not bounded, thus, resistance-based designs could potentially be non-conservative. The findings are applicable to (non-)linear MDOF systems. To address this issue and improve the quality of numerical results, remedies and recommendations are proposed. [ABSTRACT FROM AUTHOR]

[Display omitted] Sluggish kinetics and severe structural instability of manganese-based cathode materials for rechargeable aqueous zinc-ion batteries (ZIBs) lead to low-rate capacity and poor cyclability, which hinder their practical applications. Pillaring manganese dioxide (MnO 2) by pre-intercalation is an effective strategy to solve the above problems. However, increasing the pre-intercalation content to realize stable cycling of high capacity at large current densities is still challenging. Here, high-rate aqueous Zn2+ storage is realized by a high-capacity K+-pillared multi-nanochannel MnO 2 cathode with 1 K per 4 Mn (δ-K 0.25 MnO 2). The high content of the K+ pillar, in conjunction with the three-dimensional confinement effect and size effect, promotes the stability and electron transport of multi-nanochannel layered MnO 2 in the ion insertion/removal process during cycling, accelerating and accommodating more Zn2+ diffusion. Multi-perspective in/ex-situ characterizations conclude that the energy storage mechanism is the Zn2+/H+ ions co-intercalating and phase transformation process. More specifically, the δ-K 0.25 MnO 2 nanospheres cathode delivers an ultrahigh reversible capacity of 297 mAh g−1 at 1 A g−1 for 500 cycles, showing over 96 % utilization of the theoretical capacity of δ-MnO 2. Even at 3 A g−1, it also delivered a 63 % utilization and 64 % capacity retention after 1000 cycles. This study introduces a highly efficient cathode material based on manganese oxide and a comprehensive analysis of its structural dynamics. These findings have the potential to improve energy storage capabilities in ZIBs significantly. [ABSTRACT FROM AUTHOR]

[Display omitted] O3 phase layered oxides are highly attractive cathode materials for sodium-ion batteries because of their high capacity and decent initial Coulombic efficiency. However, their rate capability and long cycling life are unsatisfactory due to the narrow Na+ transfer channel and irreversible phase transitions of O3 phase during sodiation/desodiation process. Constructing O3/P2 multiphase structures has been proven to be an effective strategy to overcome these challenges. In this study, we synthesized bi-phasic structured O3/P2 Na(Ni 2/9 Fe 1/3 Cu 1/9 Mn 1/3) 1- x Mn x O 2 (x = 0.01, 0.02, 0.03, 0.04, 0.05) materials through Mn doping during sodiation process. Benefiting from surface P2 phase layer with the enhanced Na+ transfer dynamics and high structural stability, the Na(Ni 2/9 Fe 1/3 Cu 1/9 Mn 1/3) 0.98 Mn 0.02 O 2 (NFCM-M2) cathode delivers a reversible capacity of 139.1 mA h g−1 at 0.1 C, and retains 71.4 % of its original capacity after 300 cycles at 1 C. Our work provides useful guidance for designing multiphase cathodes and offers new insights into the structure-performance correlation for sodium-ion cathode materials. [ABSTRACT FROM AUTHOR]

Protein surfaces have pivotal roles in interactions between proteins and other biological molecules. However, the structural dynamics of protein surfaces have rarely been explored and are poorly understood. Here, the surface of a single‐stranded DNA (ssDNA) binding protein (SSB) with four DNA binding domains that bind ssDNA in binding site sizes of 35, 56, and 65 nucleotides per tetramer is investigated. Using oligonucleotides as probes to sense the charged surface, NaCl induces a two‐state structural transition on the SSB surface even at moderate concentrations. Chelation of sodium ions with charged amino acids alters the network of hydrogen bonds and/or salt bridges on the surface. Such changes are associated with changes in the electrostatic potential landscape and interaction mode. These findings advance the understanding of the molecular mechanism underlying the enigmatic salt‐induced transitions between different DNA binding site sizes of SSBs. This work demonstrates that monovalent salt is a key regulator of biomolecular interactions that not only play roles in non‐specific electrostatic screening effects as usually assumed but also may configure the surface of proteins to contribute to the effective regulation of biomolecular recognition and other downstream events. [ABSTRACT FROM AUTHOR]

With the advancement of high-speed and lightweight vehicles, the occurrence of wheel tread wear, including wheel flats, has escalated. The resulting impact loads on axle-end components and the dynamic response of the axle cannot be overlooked. On-track tests were conducted on wheel flats to obtain wheel-rail forces, axle box vibration accelerations, and axle stresses during service. Time–frequency analysis was employed to uncover patterns of variation with speed. Additionally, a dynamic model of the high-speed train–track system was developed to replicate test conditions, investigating the characteristics of wheel–rail loads and structural elastic vibrations under high-frequency excitation for various flat sizes and higher operating speeds. The findings reveal that under wheel flats, the time-domain response of the wheel–rail system exhibits periodic impacts, while the frequency-domain shows high-frequency energy comprising multiple harmonics of the wheel rotation frequency. Wheel–rail forces, axle box vibration accelerations, and axle stresses exhibit inflection points with increasing speed, particularly within the 120–160 km/h range. In the high-frequency domain, axle stresses display characteristic frequencies that remain unchanged with speed, attributed to the coupled vertical bending vibration modes of the wheel–rail system. These research results offer foundational support for predicting fatigue damage to axle-end components, assessing axle stress, and establishing tolerances for tread defect limits. [ABSTRACT FROM AUTHOR]

Structural dynamic problems are influenced by many parameters which are uncertain in nature. As such, for better estimation, the problems can be considered with epistemic-type uncertainties. Due to the epistemic type of uncertainties, the modeled system appears in the form of an imprecise nonlinear eigenvalue problem. Therefore, this paper proposes a novel nonprobabilistic approach to analyze nonlinear eigenvalue problems in structural dynamics, particularly when dealing with imprecisely defined parameters. In order to solve the fuzzy nonlinear eigenvalue models, the same is to be transformed into a fuzzy eigenvalue problem. Traditional methods often rely on probabilistic frameworks, which may not adequately capture uncertainties inherent in real-world structural systems. The proposed approach leverages concepts from fuzzy set theory to handle imprecise data, providing a more robust and realistic analysis. Then, the developed method is used to solve a case study of structural dynamic problem. Here, a spring-mass system is demonstrated through the developed technique to quantify the uncertain field variables. Based on the imprecise system parameters, different fuzzy models are discussed in various cases and results are reported here. This framework offers valuable insights for engineers and researchers working on dynamic analysis of complex structures, paving the way for more reliable and informed decision-making in structural engineering applications. [ABSTRACT FROM AUTHOR]

In this study, we present a detailed analysis of the structural forms of asymmetric curcuminoids through single‐crystal X‐ray diffraction and nuclear magnetic resonance (NMR) spectroscopy. Curcuminoids substituted with electron‐withdrawing groups (Cl and Br) predominantly adopt the β‐keto‐enol form, whereas those with an OMe group exhibit both diketo and β‐keto‐enol forms. Variable‐temperature X‐ray diffraction studies confirm that the structural state of curcuminoids is influenced by temperature. Our findings also reveal that the β‐keto‐enol form is favored in acidic and neutral conditions, while the diketo form is more prevalent in basic environments. The theoretical Density Functional Theory (DFT) calculations further elucidate the energy differences between the diketo and β‐keto‐enol forms, emphasizing the significance of electronic effects and temperature on tautomeric distributions. These insights enhance our understanding of the structural dynamics of curcuminoids, with implications for their biological activity and pharmacological applications. [ABSTRACT FROM AUTHOR]

As a typical passive energy dissipation device, the fluid viscous damper (FVD) is widely utilized for structural vibration control. However, performance degradation in FVDs has been highlighted, particularly concerning the gap effect resulting from the imperfect installation and insufficient fluid. This study proposes three analytical models to characterize the gap property in the hysteresis behavior of FVDs, including the Gap model (G. model), the Equivalence model (E. model), and the Stiffness Degradation model (S. model). The purpose of the G. model is to reproduce the zero-force platform in the hysteresis curve. The E. model and S. model are both simplified models, aiming to consider the gap effect by altering the damping coefficient, velocity exponent, and stiffness based on the energy and maximum force equivalence principles. Shake table tests of a single-degree-of-freedom system are carried out to validate and assess the effectiveness and accuracy of these three methods. The results indicate that the gap effect will significantly degrade the vibration mitigation performance of FVDs, and hence it needs to be considered in simulations. The displacement and force obtained using the G. model under distinct loads highly correspond to the experimental results. By adopting the simplified models, satisfactory results can be derived with a lower implementation cost. Among them, the E. model is more appropriate when subjected to harmonic loads, while the S. model is suggested for cases under seismic excitations. [ABSTRACT FROM AUTHOR]

Low prediction accuracy of natural frequencies of a milling robot is one major obstacle to the avoidance of chatter vibration in low-speed robotic milling. For enhanced accuracy in predicting the natural frequency of mixed robot, a variable stiffness model is proposed featuring the dependency of joint stiffness on the joint variables, rather than the constant joint stiffness in the traditional assumption. By integrating the variable joint stiffness model into a mode-reduced 4DOF model modified for the present study, the new method for predicting the robot natural frequency is then built, analyzed, and verified through simulation and modal tests by both a 3-axis accelerometer and a laser vibrometer on the milling robot under different robot configurations. Comparison of the experimental values from the modal tests against the natural frequencies predicted by the proposed model reveals a predicting error of less than 10%, hence enhanced accuracy of the proposed variable joint stiffness model in a large operational space. Based on the model, milling parameters without structural vibration has been selected, and the quality of the robot milling for titanium alloy has been improved. [ABSTRACT FROM AUTHOR]

Human phosphoglycerate kinase 1(hPGK1) is a key glycolytic enzyme that regulates the balance between ADP and ATP concentrations inside the cell. Phosphorylation of hPGK1 at S203 and S256 has been associated with enzyme import from the cytosol to the mitochondria and the nucleus respectively. These changes in subcellular locations drive tumorigenesis and are likely associated with site‐specific changes in protein stability. In this work, we investigate the effects of site‐specific phosphorylation on thermal and kinetic stability and protein structural dynamics by hydrogen–deuterium exchange (HDX) and molecular dynamics (MD) simulations. We also investigate the binding of 3‐phosphoglycerate and Mg‐ADP using these approaches. We show that the phosphomimetic mutation S256D reduces hPGK1 kinetic stability by 50‐fold, with no effect of the mutation S203D. Calorimetric studies of ligand binding show a large decrease in affinity for Mg‐ADP in the S256D variant, whereas Mg‐ADP binding to the WT and S203D can be accurately investigated using protein kinetic stability and binding thermodynamic models. HDX and MD simulations confirmed the destabilization caused by the mutation S256D (with some long‐range effects on stability) and its reduced affinity for Mg‐ADP due to the strong destabilization of its binding site (particularly in the apo‐state). Our research provides evidence suggesting that modifications in protein stability could potentially enhance the translocation of hPGK1 to the nucleus in cancer. While the structural and energetic basis of its mitochondrial import remain unknown. [ABSTRACT FROM AUTHOR]

This study considers the active vibration control of a sandwich truncated cone, whose intermediate layer is made of bidirectional functionally graded (FG) porous material bonded with integrated piezoelectric actuator and sensor layers on its outer and inner surfaces. The material properties of the bidirectional functionally graded porous truncated cone (FGPTC), with even and uneven porosity distributions along the length and thickness directions, are changed using a power law function. The governing motion equations utilize the two-dimensional (2D) axisymmetric theory of elasticity rather than simple shell theories. The solving of the governing motion equations is accomplished through the utilization of graded finite element and Newmark methods. The study investigates the impact of dimensions, parameters, and porosity types on transient response behavior, including the semi-vertex angle and the ratio of truncated cone length to outer radius. Furthermore, the effects of power index, porosity volume fractions, rotational velocities, and boundary conditions are examined. Active vibration control (AVC) of the piezoelectric FGPTC is achieved by employing a closed-loop control algorithm based on velocity feedback. Several numerical simulations are conducted to evaluate the effectiveness of the proposed active vibration control system in reducing structural vibrations. The results demonstrate significant reductions in vibration amplitudes and improved structural stability achieved through the active control approach. [ABSTRACT FROM AUTHOR]

Flow-like events usually occur during heavy rainfall and pose significant threats to ecosystems and human life and property because of their suddenness, high speed, and long distances. To study the solid–fluid transition and subsequent high fluidity and hypermobility mechanism of redeposited loess, we conducted a series of flume tests and rheological tests, and the results showed that loess exhibits different degrees of fluidized movement characteristics under different rainfall intensities, and a rainfall intensity of 90 mm/h was the most likely to trigger loess flowslides. Additional rheological analyses indicated that viscosity (shear rate) bifurcation characterizes the rheological response of loess solid–fluid transition, and the decrease in viscosity caused by shear thinning can explain the drag reduction effect and its high fluidity in the process of solid–fluid transition, which corresponds well with the results of flume tests. We proposed a two-step yielding characteristic and introduced structural dynamics to establish a unified solid–fluid transition model incorporating a hydro-mechanical coupling and rheological property. The model can be used to describe both the solid-like behavior of soil before phase transition using an elastoplastic model and fluid-like behavior after phase transition using a viscoplastic model. The research results provide a new understanding of solid–fluid phase transition characteristics of loess from the perspective of rheology, which can also provide a new idea for studying the fluidization movement of rock avalanches and pyroclastic flows and their geomorphic evolution. [ABSTRACT FROM AUTHOR]

• Fibroblast-specific ablation of CCN1 neither impacts cardiac function nor myocardial collagen levels; however, it disrupts collagen fibril organization and increases matrix compliance. • Fibroblast-specific Ccn1 ablated mice display an increased incidence of mortality and cardiac rupture after myocardial infarction. • Post-myocardial infarct scars in fibroblast-specific Ccn1 ablated mice exhibit increased ECM complexity and diminished collagen alignment. • Alterations in ECM structure in fibroblast-specific Ccn1 ablated mice are associated with reductions in fibroblast-matrix interactions. • Findings suggest that CCN1 plays a critical role in acute scar formation by directing the alignment of fibrillar collagen within the developing scar, thereby shaping the structural attributes that underlie its structural integrity. Members of the cellular communication network family (CCN) of matricellular proteins, like CCN1, have long been implicated in the regulation of cellular processes underlying wound healing, tissue fibrogenesis, and collagen dynamics. While many studies suggest antifibrotic actions for CCN1 in the adult heart through the promotion of myofibroblast senescence, they largely relied on exogenous supplementation strategies in in vivo models of cardiac injury where its expression is already induced—which may confound interpretation of its function in this process. The objective of this study was to interrogate the role of the endogenous protein on fibroblast function, collagen structural dynamics, and its associated impact on cardiac fibrosis after myocardial infarction (MI). Here, we employed CCN1 loss-of-function methodologies, including both in vitro siRNA-mediated depletion and in vivo fibroblast-specific knockout mice to assess the role of the endogenous protein on cardiac fibroblast fibrotic signaling, and its involvement in acute scar formation after MI. In vitro depletion of CCN1 reduced cardiac fibroblast senescence and proliferation. Although depletion of CCN1 decreased the expression of collagen processing and stabilization enzymes (i.e. , P4HA1, PLOD1, and PLOD2), it did not inhibit myofibroblast induction or type I collagen synthesis. Alone, fibroblast-specific removal of CCN1 did not negatively impact ventricular performance or myocardial collagen content but did contribute to disorganization of collagen fibrils and increased matrix compliance. Similarly, Ccn1 ablated animals subjected to MI showed no discernible alterations in cardiac structure or function one week after permanent coronary artery ligation, but exhibited marked increases in incidence of mortality and cardiac rupture. Consistent with our findings that CCN1 depletion does not assuage myofibroblast conversion or type I collagen synthesis in vitro, Ccn1 knockout animals revealed no measurable differences in collagen scar width or mass compared to controls; however, detailed structural analyses via SHG and TEM of scar regions revealed marked alterations in their scar collagen topography—exhibiting changes in numerous macro- and micro-level collagen architectural attributes. Specifically, Ccn1 knockout mice displayed heightened ECM structural complexity in post-MI scar regions, including diminished local alignment and heightened tortuosity of collagen fibers, as well as reduced organizational coherency, packing, and size of collagen fibrils. Associated with these changes in ECM topography with the loss of CCN1 were reductions in fibroblast-matrix interactions, as evidenced by reduced fibroblast nuclear and cellular deformation in vivo and reduced focal-adhesion formation in vitro ; findings that ultimately suggest CCN1's ability to influence fibroblast-led collagen alignment may in part be credited to its capacity to augment fibroblast-matrix interactions. These findings underscore the pivotal role of endogenous CCN1 in the scar formation process occurring after MI, directing the appropriate arrangement of the extracellular matrix's collagenous components in the maturing scar—shaping the mechanical properties that support its structural stability. While this suggests an adaptive role for CCN1 in regulating collagen structural attributes crucial for supporting scar integrity post MI, the long-term protracted expression of CCN1 holds maladaptive implications, potentially diminishing collagen structural complexity and compliance in non-infarct regions. [ABSTRACT FROM AUTHOR]

The development of telescopes with large apertures is driven by the increasing demand for higher imaging resolution and coverage. Large membrane diffraction space telescopes are particularly attractive due to their lightweight nature, ease of folding and unfolding, and high-precision imaging capabilities. However, their substantial size and flexibility make them susceptible to long-duration, low-frequency vibrations during attitude maneuvers, which degrade attitude and imaging accuracy and risk instrument damage. Consequently, an urgent need exists for a high-precision integrated control scheme. In this paper, the integrated control of vibration and attitude in a large space telescope is studied using cable actuators and control moment gyroscopes (CMGs). Since cables can only withstand limited tension, the unilateral and constrained characteristics of the control input are taken into account during the control design process. Firstly, a rigid-flexible coupling dynamic model of the space telescope is established using the velocity variation principle with hybrid coordinates. Additionally, a two-body astrodynamic model is developed to assess the impact of gravity gradient torque. Next, combining the computational torque method and H∞ control theory, an integrated control scheme is proposed, which achieves vibration and attitude control during maneuvers. Then, this paper optimizes the cable actuator positions via the discrete particle swarm optimization (PSO) algorithm and plans various attitude maneuver paths. Finally, numerical simulations are adopted to demonstrate the effectiveness of the control scheme. The results show that this integrated control scheme swiftly suppresses structural vibrations during attitude maneuvers, enabling high-precision attitude control of the space telescope. • A vibration-attitude integrated control for a novel large membrane diffraction space telescope is studied • 3 types of attitude maneuver paths are planned for the two requirements of time optimal and minimum vibration excitation. [ABSTRACT FROM AUTHOR]

Accurate prediction of the future evolution of observational time series is a paramount challenge in current data‐driven research. While existing techniques struggle to learn useful representations from the temporal correlations, the high dimensionality in spatial domain is always considered as obstacle, leading to the curse of dimensionality and excessive resource consumption. This work designs a novel structure‐aware reservoir computing aiming at enhancing the predictability of coupled time series, by incorporating their historical dynamics as well as structural information. Paralleled reservoir computers with redesigned mixing inputs based on spatial relationships are implemented to cope with the multiple time series, whose core idea originates from the principle of the celebrated Granger causality. Representative numerical simulations and comparisons demonstrate the superior performance of the approach over the traditional ones. This work provides valuable insights into deeply mining both temporal and spatial information to enhance the representation learning of data in various machine learning techniques. [ABSTRACT FROM AUTHOR]

Mathematical modeling and numerical simulation have a considerable presence in the vast universe of engineering disciplines, given their usefulness in explaining, comprehending, and simulating phenomena and processes with which engineers are in contact in their daily creative and problem‐solving work. For this reason, engineering study programs have at least one course dedicated to dealing with the mathematical modeling of dynamic systems as an essential complement to subsequent courses such as automatic control, structural dynamics, and mechanical vibrations. Nowadays, many technological tools illustrate the applications of mathematical modeling interactively through experiments that offer an incomparable motivation to the students to corroborate with real‐world examples, the utility and veracity of the theory presented to them in the classroom and that in many occasions seems lacking utility and direct relation with the world in which they develop. Based on those mentioned above, this paper presents an example of applying the Laplace transform in modeling physical systems, using a second‐order circuit attached to an Arduino Due board in conjunction with the Jupyter Notebook environment. The numerical and experimental results can be obtained through three optional kernels: Python, Octave, or MATLAB®. For educational purposes, the resulting computer application was presented to undergraduate students of Mechatronics Engineering as an illustrative complement to two courses entitled Signals and Systems Analysis, part of the second semester, and Mathematical Modeling, part of the fifth semester. [ABSTRACT FROM AUTHOR]

Cellular materials such as aluminum and polyurethane foams are recognized for their effectiveness in energy absorption. They commonly serve as crushable cores in sacrificial cladding for blast mitigation purposes. This study delves into the effectiveness of autoclaved aerated concrete (AAC), a lightweight, porous material known for its energy-absorbing properties as a crushable core in sacrificial cladding. The experimental set-up features a rigid frame made of steel measuring 1000 × 1000 × 15 mm3 with a central square opening (300 × 300 mm2) holding a 2 mm thick aluminum plate representing the structure. The dynamic response of the aluminum plate is captured using two high-speed cameras arranged in a stereoscopic configuration. Three-dimensional digital image correlation is used to compute the transient deformation fields. Blast loading is achieved by detonating 20 g of C4 explosive set at 250 mm from the plate's center. The study assesses the mineral foam's absorption capacity by comparing out-of-plane displacement and mean permanent deformation of the aluminum plate with and without the protective solution. Six foam configurations (A to F) are tested experimentally and numerically, varying in the foam's free space for expansion relative to its total volume. Results show positive protective effects, with configuration F reducing maximum deflection by at least 30% and configuration C by up to 70%. Foam configuration influences energy dissipation, with an optimal lateral surface-to-volume ratio (ζ) enhancing protective effects, although excessive ζ leads to non-uniform foam crushing. To address the influence of front skin deformability, a non-deformable front skin has been adopted. The latter demonstrates an increased effectiveness of the sacrificial cladding, particularly for ζ values above the optimal value obtained when using a deformable front skin. Notably, using a non-deformable front skin increases maximum deflection reduction and foam energy absorption by up to approximately 30%. [ABSTRACT FROM AUTHOR]

Copyright of Forensische Psychiatrie, Psychologie, Kriminologie is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The MC1R protein is a receptor found in melanocytes that plays a role in melanin synthesis. Mutations in this protein can impact hair color, skin tone, tanning ability, and increase the risk of skin cancer. The MC1R protein is activated by the alpha‐melanocyte‐stimulating hormone (α‐MSH). Previous studies have shown that mutations affect the interaction between MC1R and α‐MSH; however, the mechanism behind this process is poorly understood. Our study aims to shed light on this mechanism using molecular dynamics (MD) simulations to analyze the Asp84Glu and Asp294His variants. We simulated both the wild‐type (WT) protein and the mutants with and without ligand. Our results reveal that mutations induce unique conformations during state transitions, hindering the switch between active and inactive states and decreasing cellular levels of cAMP. Interestingly, Asp294His showed increased ligand affinity but decreased protein activity, highlighting that tighter binding does not always lead to increased activation. Our study provides insights into the molecular mechanisms underlying the impact of MC1R mutations on protein activity. [ABSTRACT FROM AUTHOR]

A versatile framework is introduced for determining optimal steady‐state operating points for wind turbine control. The framework is based on solving constrained optimization problems at fixed wind speeds and allows for systematically studying required trade‐offs and parameter sensitivities. It can be used as a basis for many control approaches, for example, to automatically compute optimal schedules for control inputs, steady‐state operating points for model linearization, or reference values for tracking. Steady‐state simulation results are obtained using full nonlinear models to consider complex effects caused by couplings from aerodynamics, structural dynamics, and possibly also hydrodynamics in the case of floating wind turbines. Focusing only on the steady‐state response allows a fast and numerically robust optimization, which makes it especially attractive for co‐design studies. The effectiveness of the framework is demonstrated on two offshore extreme‐scale wind turbines, one floating and one fixed bottom. [ABSTRACT FROM AUTHOR]

The triboelectric nanogenerator (TENG) is a new type of energy conversion technology capable of transforming various forms of environmental energy into electricity. However, most of the existing spring‐assisted TENGs (S‐TENGs) are based on the vertical contact‐separation mode, which has low energy‐harvesting efficiency and insufficient research on the performance output of TENG under near‐resonant frequency conditions. In this article, a low‐cost S‐TENG with independent layer mode is designed for vibration energy harvesting. The effects of different vibration parameters and structural parameters on the output performance are comprehensively investigated. In the experimental results, it is shown that the output voltage of the S‐TENG reaches its peak at a frequency of 50 Hz, achieving ≈40 V. To validate the capability of S‐TENG in powering low‐power devices, 20 LED lights are successfully lit. It is found that the maximum output power across the external resistor of 8 MΩ is 0.4 mw. It is also investigated that the output characteristics of S‐TENG under resonance and the results showed that higher output electric power can be achieved when the vibration frequency is close to the intrinsic frequency of the S‐TENG. In this finding, the potential of S‐TENG in optimized energy‐harvesting applications, particularly in resonance‐enhanced scenarios. [ABSTRACT FROM AUTHOR]

In this paper, the newly-developed condensed Galerkin element of polynomial degree m ̄ for first-order initial-value problems is reformulated for and extended to the structural dynamic equations, yielding a high-performance dynamic element of one-step, unconditionally stable type with the conventional finite element (FE) convergence O (h m ̄ + 1) within the element and the extra-superconvergence O (h 2 m ̄ + 2) at the element end-nodes. Further, based on the element energy projection (EEP) technique, a superconvergence EEP formula for the condensed element is proposed in the paper and mathematical analysis is presented to prove that the derived EEP solution gains a superconvergence O (h m ̄ + 2) , which is an order higher than the FE solution of O (h m ̄ + 1) for all element degree m ̄ ≥ 1 and is hence qualified to serve as a point-wise error estimator. As a result, a simple, efficient, and reliable algorithm with adaptive time-stepping controlled by the maximum norm is proposed. Representative numerical examples are presented to verify the validity of the proposed theorems and to demonstrate the high performance of the proposed element and the associated adaptivity algorithm. [ABSTRACT FROM AUTHOR]

This research investigated the governance of the national community-based rainwater harvesting initiative, known as One Million Cisterns (P1MC), within the local context of the Brazilian Amazon rainforest. The initiative aimed to empower communities by providing water collection infrastructures and involved over 3,000 civil society organisations and various local and national bodies. Our study observed that while some communities thrived, others faced challenges in adopting and maintaining the cisterns. Focusing on communities near the city of Belém, Pará, within a specific Protected Extractivist Reserve Areas (RESEX), we explored the factors behind success and failure in managing rainwater systems. By applying Ostrom's Institutional Analysis and Development Framework (IADF) and Beer's Viable System Model (VSM), we assessed local institutional arrangements and community self-organisation. Through questionnaires and interviews with 109 end-users between 2018 and 2022, we identified two distinct organisational structures and their associated pathologies. The combined use of IADF and VSM provided valuable insights into the structural and institutional dynamics affecting system adoption, maintenance, and governance. Our findings emphasise the importance of a comprehensive framework integrating these analytical tools for designing effective social programmes in Brazil. This study contributes to the ongoing discourse on sustainable development and resource management in the Amazon region, highlighting the significance of tailored governance structures and community engagement in addressing complex environmental challenges. [ABSTRACT FROM AUTHOR]

Structural- and functional heterogeneity, as well as allosteric regulation, in homo-monomeric enzymes is a highly active area of research. One such enzyme is human nuclear-associated deoxyuridine 5'-triphosphate nucleotidohydrolase (dUTPase), which has emerged as an interesting drug target in combination therapy with traditional nucleotide analogue treatment of cancer. We report, for the first time, a full structural dynamics study of human dUTPase by NMR. dUTPase has been investigated in terms of structural dynamics in its apo form, in complex with the modified substrate resistant to hydrolysis, 2'-deoxyuridine 5'-α,β-imido-triphosphate (dUpNHpp), as well as the product, 2'-deoxy-uridine-monophosphate (dUMP). The apo form of the enzyme displayed slow dynamics in the milli- to microsecond regime in relaxation dispersion experiments, which was further slowed down to observable heterogeneity upon substrate-analogue binding. The results suggest that the non-hydrolysable substrate-analogue traps the enzyme in the conformational isomerization step that has been previously suggested to be part of the enzyme catalysis kinetics cycle. The observed heterogeneity fits well with the pattern expected to emerge from the suggested kinetic model, and no evidence for homotropic allosterism was found. The heatmaps of the slow dynamics, chemical shift perturbation upon substrate binding and conserved regions of the enzyme sequence all displayed a similar pattern, which suggests that the structural dynamics is finely tuned and important for the biological function of the enzyme for binding, conformational shift, catalysis and substrate release. [ABSTRACT FROM AUTHOR]

Research on the SSI effect on flat sites has yielded many valuable conclusions. However, current research on the impacts of various special local terrains on structural dynamics remains limited. For mountainous areas, it is common to construct houses in a multi-step, climbing, and laterally staggered architectural form that follows the mountain terrain. Only through the analysis of the combined action of the upper and lower parts can the seismic performance of this type of structural form be better revealed; considering the influence of SSI effects will be closer to the actual seismic effects. Therefore, to identify the damage factors of the mid-story isolated stilted structures under earthquakes and provide optimized design plans for the structures, six models are established considering three slopes and two types of foundations based on the engineering case in Chongqing, China. Through the elastic-plastic time-history analysis under earthquakes in the down and transverse-slope directions, concludes, compared with not considering SSI, the seismic response of the mid-story isolated stilted structures considering SSI in mountainous areas is amplified. With the increase of the mountain slope, the seismic response of the structures considering SSI increases, and the amplification coefficients are between 1–1.8. The amplification coefficients of the structures without SSI are concentrated around 1, which is less influenced by the slope. The damage to the stilted isolated layer is mainly concentrated in the column and the beam end, and the maximum seismic response appears in the short columns. The foundation soil stress increases with the increase of the mountain slope. [ABSTRACT FROM AUTHOR]

This paper proposes a heterogeneous time integration algorithm to analyze the dynamic response of structures with localized hysteretic nonlinearities. The critical point is to treat the whole structure as a combination of a linear substructure governed by the second-order dynamic equation and a nonlinear substructure controlled by the first-order differential formulation. With this partitioning, tailored numerical integration algorithms with heterogeneous time steps are applied directly to calculate the displacements and hysteretic forces from the linear and the nonlinear substructures, respectively. Subsequently, the dynamic responses of the whole structure are solved by a predictor–corrector procedure, where the hysteretic forces and displacement responses are coupled and exchanged to update the partitioning solutions. Furthermore, the energy balance method is derived to verify the stability of the proposed heterogeneous time integration algorithm. Dynamic responses of structures with friction damper, hysteretic models, and bolted joint models are studied to demonstrate the accuracy and efficiency of the proposed algorithm. [ABSTRACT FROM AUTHOR]

During strong earthquakes, the footing of a rockable bridge can temporarily and partially separate from the support. This rocking motion can activate rigid‐like motions, reducing the deformation along the height of bridge piers and leading to smaller bending moments. As a result, rockable footing has been considered as a possibility for low‐damage seismic design of structures. For bridges, the seismic‐induced interaction between girders and adjacent abutments can change the structural dynamics due to the impeded girder movements. Although bridges with rockable footing, for example, the South Rangitikei viaduct, have been constructed, research on rockable bridges mainly focused on a single‐segment case. Physical experiments on rockable bridges considering pounding are very limited. In this work, large‐scale shake table experiments were performed on a two‐segment bridge model with abutments. The cases without pounding and with girder‐girder pounding alone were considered as references to help interpret the results. To investigate the consequence of footing rocking, the results of the rockable bridge on a rigid base were compared to that of the fixed‐base bridge. The study reveals that compared to a fixed‐base segment, the girder of a rockable segment is easier to move laterally. This change in dynamics due to rocking leads to less maximum pounding forces and thus reduces the damage potential to girders and abutments. [ABSTRACT FROM AUTHOR]

In vibration testing of civil engineering structures, the first two vibration modes are crucial in representing the global dynamic behavior of the structure measured. In the present study, a comprehensive method is proposed to identify the first two vibration modes of wind turbine towers, which is based on the analysis of fractional order statistical moments (FSM). This study offers novel contributions in two key aspects: (1) theoretical derivations of the relationship between FSM and vibration mode; and (2) successful use of 32/7‐order displacement statistical moment (Md32/7)$( {M_d^{32/7}} )$ as the optimal FSM to identify wind turbine tower modes, by combining with noise resistance analysis, sensitivity analysis, and stability analysis, respectively. Using the proposed method, the FSM was first used to identify the modal vibration of wind turbine towers. By obtaining the response of the structure on the same vertical line, FSM was then calculated to estimate the corresponding structural modal vibration. Considering other influencing factors in the field test, the modal identification results of this index under different excitation forms and noise conditions were analyzed based on numerical simulation and verified with field wind tower test data. The results of the evaluation show that the proposed statistical moments of Md32/7$M_d^{32/7}$ can accurately identify the first two vibration modes of wind turbine towers. This presents a new robust method for modal vibration identification, that is, simple and effective in its implementation. [ABSTRACT FROM AUTHOR]

Translation abstract Effects of traffic‐induced vibrations on young concrete: part 2In the COUNT (COncreting UNder Traffic) research project, the effects of traffic vibrations on young concrete were extensively investigated. This issue has recently become more relevant. When bridges are being renewed or extended, traffic bans are often imposed for fear that the vibrations caused by traffic could damage the young (hardening) concrete. COUNT aimed to determine critical vibration values and underlying damage mechanisms on the basis of three systematically designed series of tests. The first two series, in which unreinforced concrete and the concrete‐steel composite were investigated, were reported on in the first part of the article, which has already been published. This second part of the article deals primarily with the third series, in which tests were carried out on a large, realistic scale. Concrete slabs were cast which were in direct contact with a vibrating prefabricated concrete slab. Possible damage was later analysed by means of crack measurements, bending tests and permeability tests. At the end, recommendations for practical application are given, also taking into account the findings of external research work. [ABSTRACT FROM AUTHOR]

G Protein Coupled Receptors (GPCRs) constitute the largest family of signalling proteins responsible for translating extracellular stimuli into intracellular functions. They play crucial roles in numerous physiological processes and are major targets for drug discovery. Dysregulation of GPCRs is implicated in various diseases, making understanding their structural dynamics critical for therapeutic development. Here, we use Hydrogen Deuterium Exchange Mass Spectrometry (HDX-MS) to explore the structural dynamics of the turkey β1-adrenergic receptor (tβ1AR) bound with nine different ligands, including agonists, partial agonists, and antagonists. We find that these ligands induce distinct dynamic patterns across the receptor, which can be grouped by compound modality. Notably, full agonist binding destabilises the intracellular loop 1 (ICL1), while antagonist binding stabilises it, highlighting ICL1's role in G protein recruitment. Our findings indicate that the conserved L72 residue in ICL1 is crucial for maintaining receptor structural integrity and stabilising the GDP-bound state. Overall, our results provide a platform for determining drug modality and highlight how HDX-MS can be used to dissect receptor ligand interaction properties and GPCR mechanism. GPCRs are vital drug targets. Here, authors use HDX-MS to gain insight into structural dynamics of β1AR upon ligand binding, revealing agonist-induced destabilisation and antagonist stabilisation of ICL1. [ABSTRACT FROM AUTHOR]

Fluorescing proteins emitting in the near-infrared region are of high importance in various fields of biomedicine and applied life sciences. Promising candidates are phytochromes that can be engineered to a small size and genetically attached to a target system for in vivo monitoring. Here, we have investigated two of these minimal single-domain phytochromes, miRFP670nano3 and miRFP718nano, aiming at a better understanding of the structural parameters that control the fluorescence properties of the covalently bound biliverdin (BV) chromophore. On the basis of resonance Raman and time-resolved fluorescence spectroscopy, it is shown that in both proteins, BV is deprotonated at one of the inner pyrrole rings (B or C). This protonation pattern, which is unusual for tetrapyrroles in proteins, implies an equilibrium between a B- and C-protonated tautomer. The dynamics of the equilibrium are slow compared to the fluorescence lifetime in miRFP670nano3 but much faster in miRFP718nano, both in the ground and excited states. The different rates of proton exchange are most likely due to the different structural dynamics of the more rigid and more flexible chromophore in miRFP670nano3 and miRFP718nano, respectively. We suggest that these structural properties account for the quite different fluorescent quantum yields of both proteins. [ABSTRACT FROM AUTHOR]