Search

Your search keyword '"Soni, Ashish"' showing total 47 results
Start Over Author "Soni, Ashish" Publication Year Range This year
47 results on '"Soni, Ashish"'

8. Charge Transfer Mediated Photoluminescence Engineering in WS2 Monolayers for Optoelectronic Application.

Author

Luhar, Bhumit, Dhankhar, Rahul, Nair, Rajesh V., Soni, Ashish, Kamath, Nagendra S., Pal, Suman Kalyan, and Balakrishnan, Viswanath

Abstract

Optical emissions from two-dimensional transition metal dichalcogenides greatly differ from sample to sample due to their interactions with different substrates with variations in parameters such as the dielectric constant, absorption coefficient, growth conditions, strain, and defects. Often, the mechanisms of environmentally sensitive optical emission in 2D materials are lacking, and it is essential to perform the measurements on the same sample with different substrate backgrounds, which is a challenge. In this work, we explore photoluminescence engineering by comparing the optical properties of WS2 on SiO2, TiOx, and Pt by selectively creating different environments locally on the same sample. The PL-confocal map with good spatial resolution reveals that the emission of WS2 on TiOx and Pt is suppressed by charge transfer at the interface. While moving from WS2 on Pt toward WS2 on the TiOx region, a 3-fold enhancement in PL emission has been observed in agreement with a 20% increase in the trion-to-exciton ratio and calculated carrier densities. Further, the transient absorption spectroscopy shows faster exciton recombination in WS2/Pt (∼5.7 ps) and WS2/TiOx (∼7.2 ps) than WS2/SiO2 (∼48.5 ps), confirming the charge transfer in varied optical emission of the WS2 monolayer. Our method paves the way for using charge transfer and controlled carrier injection to design nanoantennas, optoelectronic devices, and quantum optical cavities in 2D materials. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

9. Uncertainty based regional-decision fusion of multispectral and nDSM for ultra-high resolution UAV imagery.

Author

Soni, Ashish, Koner, Radhakanta, and Villuri, Vasant Govind Kumar

Subjects
*ARTIFICIAL neural networks, *CONVOLUTIONAL neural networks, *PATTERN recognition systems, *MARKOV random fields, *IMAGE recognition (Computer vision)
Abstract

The recent advancement in the pattern recognition technique has demonstrated the superiority of remote sensing technology. Deep neural networks use spatial feature representations such as convolution neural networks (CNN) to provide better generalisation capability. Our aim is two-fold: firstly, increase the reliability feature by performing the Dual-scale fusion via a modified Markov random field known as DuCNN-MMRF. Secondly, an integration framework was introduced to combine the multispectral image classification produced by DuCNN-MMRF and Normalised-Digital Surface Model (nDSM) information, using a novel approach known as constraint-based Dempster Shafer theory (C-DST). C-DST targeted DuCNN-MMRF's uncertain information (ambiguous information) and rectified it with complementary information. [ABSTRACT FROM AUTHOR]

Published
2024
Full Text
View/download PDF

12. Long-Lived Interlayer Excitons in WS2/Ruddlesden–Popper Perovskite van der Waals Heterostructures

Author

Soni, Ashish, Ghosal, Supriya, Kundar, Milon, Pati, Swapan K., and Pal, Suman Kalyan

Abstract

Two-dimensional (2D) transition metal dichalcogenides (TMDs) and perovskites hold substantial promise for various optoelectronic applications such as light emission, photodetection, and energy harvesting. However, each of these materials possesses certain limitations that can be overcome by synergistically combining them to form heterostructures, thereby unveiling intriguing optical properties. In this study, we present an uncomplicated technique for crafting a van der Waals (vdW) heterojunction comprising monolayer WS2and a Ruddlesden–Popper (RP) perovskite, namely (TEA)2PbI4. By utilizing ultrafast transient absorption (TA) spectroscopy, we explored the charge carrier dynamics within the WS2/(TEA)2PbI4heterostructure. Our findings uncover a type-II band alignment in the heterostructure, facilitating rapid (within 260 fs) hole transfer from WS2to the perovskite and leading to the formation of interlayer excitons (IXs) with a much longer lifetime (728 ps). This strategic approach has the potential to contribute to the development of hybrid systems aimed at achieving high-performance optoelectronic devices.

Published
2024
Full Text
View/download PDF

13. Fabrication of cobalt oxide nanosheets using Withania somniferaroot extract for degradation of organic pollutants

Author

Gangwar, Chinky, Sahu, Saloni, Jaiswal, Ritik, Gangwar, Nisha, and Soni, Ashish

Abstract

In today’s scenario, material science emerges as pivotal players, as it is an emerging and fast-growing interdisciplinary field. Nanomaterials are increasingly popular among researchers due to their unique physicochemical properties and multifaceted applications. Recently, researchers are exploring more sustainable approaches for the synthesis of nanomaterials due to its numerous advantages. In this context, present investigation reports an approach for the synthesis of cobalt oxide nanosheets (Co3O4NSs). This approach leverages environmentally friendly and sustainable methods, minimizing the use of hazardous chemicals and reducing energy consumption. Hence it involved Withania somnifera(ashwagandha) root extract as a greener reductant as well as stabilizing agent. The synthesized Co3O4NSs were thoroughly analyzed using various techniques, including ultraviolet-visible (UV–vis) spectroscopy, fourier-transform infrared spectroscopy (FTIR), powder x-ray diffraction (PXRD), and field emission scanning electron microscopy (FE-SEM). A sharp absorption peak at 252 nm with a tail towards higher wavelength reveal the formation of Co3O4NSs. The diffraction pattern reveals a face centered cubic structure of Co3O4NSs. Morphological studies confirmed the substantial surface area of Co3O4NSs which enable us to perform the catalytic degradation of azo dye, i.e., methyl orange. It provides that 10 mg of Co3O4NSs is sufficient to degrade a 10 ppm aqueous methyl orange solution by 75.82 % in the dark and by 96.12 % under sunlight exposure. Thus, this study offers an excellent pathway for the synthesis of Co3O4NSs and demonstrates their potential as a promising material for future catalytic applications.

Published
2024
Full Text
View/download PDF

14. Analysis of Spring Back Error in Pipe Bending

Author

Hujare, Pravin, Chavan, Umesh, Hujare, Deepak, Sakat, Abhishek, Ghodake, Sanket, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

15. Data-Driven Evaluation of Predictive Models for Estimation of Springback in Backward Metal Flow Forming Process

Author

Kachroo, Darsh, Banerjee, Prabas, Bera, Ashish, Hui, Nirmal Baran, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

16. Design and Optimization of Cutting Flutes of Dental Implant to Improve Stress Pattern at the Bone Interface

Author

Teli, Virendra, Sah, Riya, Sulakshane, Nikhil, Dhatrak, Pankaj, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

17. Study of Surface Roughness in CNC Turning of EN8 Steel: An Experimental Approach

Author

Vara, Harsh, Dikshit, Mithilesh K., Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

18. Green Manufacturing: A Global Perspective

Author

Patil, Shantanu, Jadhav, Pavankumar, Shinde, Dhiraj, Pawar, Shubham, Pawar, Rupesh, Chinchanikar, Satish, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

19. Design and Development of a Shredder Machine for Efficient Recycling of Waste Plastic in India

Author

Pandey, Richa, Singh, Rahul, Ranjan, Ranjeet, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

20. Progress in Non-ferrous Alloy Behavior in Forging Technology

Author

Kulkarni, Rahul Ramesh, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

21. Revolutionizing Automotive Precision: Redesigning and 3D Printing High-Performance CV Joints with Autodesk Fusion 360

Author

Selvan, M. Tamil, Saravanakumar, A., Thomas, Moses, Sijin, S., Ahamed, Mushthaq, Kaviyarasi, R., Abhilash, T. W., Sankar, K. T. Sourav, Ranjan, Rajeev Kumar, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

22. Effect of Process Parameters on Surface Roughness of Square Flange Formed by Single Point Incremental Forming

Author

Gajara, Hardik, Prajapati, Ashok, Shah, Vrushti, Makwana, Rudreshkumar, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

23. Integrating FMEA and DEMATEL Methods for Identification of Leakage of Oil in Hydraulic Cylinder Assembly

Author

Fuse, Kishan, Abhinaya, Bhasuru, Solanki, Jaydeep, Wakchaure, Kiran, Surner, Nagorao, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

24. Revolutionizing in Tools: A New Era of Cutting Tool Health Monitoring with IoT

Author

Pondkule, Sunil M., Bhosle, Sachin M., Deulgaonkar, Vikas R., Mahadik, Shrikant C., Bhoite, Kiran L., Attar, Kaiyyum C., Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

25. Optimization of 3D Printing Process Parameters and Their Influence on Part Characteristic

Author

Shah, Rushil, Bhavsar, Keval, Parmar, Umang, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

26. Investigation of Material Movement in Friction Stir Welding with Plasticine as an Analogue

Author

Wakchaure, Kiran, Fuse, Kishan, Thakur, Ajaykumar, Surner, Nagorao, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

27. Methods and Materials for Metal Additive Manufacturing: A Critical Review on Aeronautic and Aerospace Sectors

Author

Koujalagi, B. G., Katti, Ramesh, Chikkanagoudar, R. N., Kelageri, Nagaraj Kishor, Lingannavar, R. G., Ali, Zeeshan, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

28. Effect of Processing Route During Double-Pass FSP Along with Low Heat Input in the Second Pass on the Superplastic Behavior of AZ31B Alloy

Author

Mahajan, Amruta, Badheka, Vishvesh, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

29. Influence of the Welding Speed on the Friction Stir Welding of Thick Al 6061-T6 Alloy Using a Bobbin Tool

Author

Fuse, Kishan, Badheka, Vishvesh, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

30. Application of Ultrasonic Welding for Dissimilar Metals: A Review

Author

Acharya, Madhavi, Badheka, Vishvesh, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

31. Experimental Investigation of Activated-TIG Process for Monel 400 Alloy

Author

Bhati, Yogita, Katakpara, Jahnavi, Badheka, Vishvesh, Khanna, Navneet, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

32. Enhancing TIG Welding Performance on Monel 400: Key Parameters

Author

Katakpara, Jahnavi, Bhati, Yogita, Badheka, Vishvesh, Khanna, Navneet, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

33. Investigation into the Performance of TIG and MIG Welded Joints of Al6061 Plates

Author

Kulkarni, Avaneesh Rajesh, Reddy, Aaluri Praveen, Dewangan, Saurabh, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

34. Welding of Ti-6Al-4V Alloy: A Review

Author

Kumar, Kamlesh, Masanta, Manoj, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

35. Mechanical and Metallurgical Analysis of Rotary Friction Welded Low Carbon Steel and Stainless Steel

Author

Khamar, Shakuntal, Vyas, Vishrut, Tamakuwala, Parth, Badheka, Vishvesh J., Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

36. A Comparative Analysis of Machining Performance During Turning SS304 Stainless Steel Under Dry and Compressed Air Cooling Conditions

Author

Gangji, Nityam, Maniyar, Imran, Jaiswal, Rohit, Gangurde, Prem, Dhavad, Utkarsh, Chinchanikar, Satish, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

37. Experimentation on Friction Welding of Aluminum Alloy with Dissimilar Metals to Determine Weld Strength of the Joint

Author

Chapke, Yashwant, Kamble, Dinesh, Agrawal, Devendra, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

38. Advances in Micro-milling: A Critical Review

Author

Khamar, Shakuntal, Kiran, M. B., Kumar, Abhishek, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

39. Microstructure Behaviour Evolutions in the Heat-Affected Zone and Fusion Zones of the AISI 304 Stainless Steel Weldment in Double Pass Weld

Author

Rizvi, Saadat Ali, Ali, Wajahat, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

40. Multi-textured Cutting Tools to Enhance the Machinability of Inconel-718

Author

Mahesh, Kore, Suman, Saurav, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

41. Investigating Cutting Forces During Hard Turning of EN 24 Steel: A Comparative Evaluation of MQL and Dry Cutting

Author

Chinchanikar, Satish, Kulkarni, Om, Dhond, Pushkar, Kumawat, Mohit, Chaudhari, Shivam, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

42. Experimental Analysis of Tool Wear in Ball End Milling Process of Ti6Al4V Alloy

Author

Shrimali, Mihir, Dikshit, Mithilesh K., Kumar, Ajit, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

43. Effect of Nanoparticles Concentration on the Lubricant Oiliness—A Review

Author

Singh, Nishant Kumar, Singh, Yashvir, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

44. A Review on Self-propelled Rotary Tools: A Comparative with Fixed-Tool Machining, Modeling, Design, and Developments

Author

Motgi, Nitin, Chinchanikar, Satish, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

45. Investigation on Tool Life and Resultant Force During Turning of Hardened EN24 Steel Using Multilayer Coated Carbide Tool

Author

Chinchanikar, Satish, Narkhede, Ganesh, Sasane, Shubham, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

46. Investigation of Chip Thickness and Shear Angle During Turning AISI 304 Stainless Steel

Author

Nirwal, Rohan, Chinchanikar, Satish, Gadge, Mahendra, Tembhurne, Soummya, Thakare, Rohit, Bhatkar, Harshal, Chaari, Fakher, Series Editor, Gherardini, Francesco, Series Editor, Ivanov, Vitalii, Series Editor, Haddar, Mohamed, Series Editor, Cavas-Martínez, Francisco, Editorial Board Member, di Mare, Francesca, Editorial Board Member, Kwon, Young W., Editorial Board Member, Tolio, Tullio A. M., Editorial Board Member, Trojanowska, Justyna, Editorial Board Member, Schmitt, Robert, Editorial Board Member, Xu, Jinyang, Editorial Board Member, Dikshit, Mithilesh K., editor, Khanna, Navneet, editor, Soni, Ashish, editor, and Markopoulos, Angelos P., editor

Published
2024
Full Text
View/download PDF

47. Long-Lived Interlayer Excitons in WS 2 /Ruddlesden-Popper Perovskite van der Waals Heterostructures.

Author

Soni A, Ghosal S, Kundar M, Pati SK, and Pal SK

Abstract

Two-dimensional (2D) transition metal dichalcogenides (TMDs) and perovskites hold substantial promise for various optoelectronic applications such as light emission, photodetection, and energy harvesting. However, each of these materials possesses certain limitations that can be overcome by synergistically combining them to form heterostructures, thereby unveiling intriguing optical properties. In this study, we present an uncomplicated technique for crafting a van der Waals (vdW) heterojunction comprising monolayer WS 2 and a Ruddlesden-Popper (RP) perovskite, namely (TEA) 2 PbI 4 . By utilizing ultrafast transient absorption (TA) spectroscopy, we explored the charge carrier dynamics within the WS 2 /(TEA) 2 PbI 4 heterostructure. Our findings uncover a type-II band alignment in the heterostructure, facilitating rapid (within 260 fs) hole transfer from WS 2 to the perovskite and leading to the formation of interlayer excitons (IXs) with a much longer lifetime (728 ps). This strategic approach has the potential to contribute to the development of hybrid systems aimed at achieving high-performance optoelectronic devices.

Published
2024
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results